Investigation of Surrogate Performance Related Tests for Fatigue Cracking of Asphalt Pavements

2021 ◽  
pp. 036119812110101
Author(s):  
Liya Jiao ◽  
John T. Harvey ◽  
Mohamed Elkashef ◽  
Yanlong Liang ◽  
David Jones
Keyword(s):  
Fatigue Life ◽  
Linear Regression Analysis ◽  
Fatigue Cracking ◽  
Asphalt Mixtures ◽  
Fatigue Performance ◽  
Bending Test ◽  
Asphalt Pavements ◽  
Index Test ◽  
Fracture Parameter ◽  
Fracture Parameters

This paper studies the relationship between laboratory measurements of fatigue performance and fracture performance of conventional asphalt mixtures, asphalt mixtures with reclaimed asphalt pavement (RAP), and rubberized asphalt mixtures. The existing four-point bending (4PB) test was developed to evaluate the fatigue performance of asphalt pavements; however, it is not necessarily appropriate for use in routine job mix formula approval and is too slow and expensive for quality control/quality assurance (QC/QA). In this paper, the semi-circular bending test and indirect tensile asphalt cracking test (IDEAL-CT) were evaluated for their potential to serve as a simple and fast surrogate fatigue performance related test for QC/QA on routine projects and routine mix design. Multiple representative fracture parameters were obtained from the Illinois flexibility index test and the IDEAL-CT. The coefficient of variation revealed that the lowest variability from both tests was in fracture strength. In addition, the linear regression analysis between fracture parameters and fatigue performance indicated that slopes, fracture toughness, and strength from fracture tests have good correlations with the initial flexural stiffness from 4PB tests, while 4PB initial stiffness is well correlated with fatigue life. The direct correlation between fracture properties and fatigue life was not as good. The fracture parameter “strength” also showed the capability of discriminating among asphalt materials with low RAP content.

Performance of Asphalt Rejuvenators in Hot-Mix Asphalt Containing Recycled Asphalt Shingles

2017 ◽  
Vol 2633 (1) ◽  
pp. 108-116 ◽  
Author(s):  
Max A. Aguirre ◽  
Marwa M. Hassan ◽  
Sharareh Shirzad ◽  
Louay N. Mohammad ◽  
Samuel B. Cooper
Keyword(s):  
Hot Mix Asphalt ◽  
Permanent Deformation ◽  
Fatigue Cracking ◽  
Strain Energy Release ◽  
Asphalt Mixtures ◽  
Bending Test ◽  
Test Results ◽  
Recycled Asphalt ◽  
Recycled Asphalt Shingles ◽  
Asphalt Shingles

The use of recycled asphalt shingles (RAS) in asphalt paving construction represents a sustainable approach to reduce virgin material consumption and negative environmental effects, as well as the cost of asphalt pavement. However, many challenges are yet to be addressed about the use of RAS in paving applications. This study evaluated the effect of the incorporation of postconsumer waste shingles and rejuvenators on the performance of hot-mix asphalt. Four asphalt rejuvenators—one bio-oil and three synthetic oils—were evaluated. A set of laboratory tests was conducted to characterize the performance of asphalt mixtures against permanent deformation and fatigue cracking. The addition of 5% RAS showed an improvement in permanent deformation when compared with a conventional mixture with no RAS. Yet the addition of asphalt rejuvenator products slightly decreased the performance against permanent deformation. On the basis of Hamburg wheel-tracking device test results, the addition of RAS did not adversely affect moisture resistance. Yet semicircular bending test results showed that the asphalt mixtures that contained asphalt rejuvenators had a lower critical strain energy release rate than the minimum threshold value (0.5 kJ/m2), which indicated a greater susceptibility to intermediate-temperature cracking.

scholarly journals Stiffness and Fatigue of Asphalt Mixtures for Pavement Construction

2018 ◽  
Vol 26 (2) ◽  
pp. 24-29 ◽  
Author(s):  
Juraj Šrámek
Keyword(s):  
Fatigue Life ◽  
Asphalt Mixture ◽  
Construction Materials ◽  
Test Methods ◽  
Asphalt Mixtures ◽  
Bending Test ◽  
Deformation Properties ◽  
Pavement Construction ◽  
And Control

AbstractThe quality of a road is affected by its correct design, the appropriate use of materials, the effects of the climate, and the technological discipline. The deformation properties and fatigue of asphalt layers are important for the design and assessment of semi-rigid and flexible pavements. The assessment of deformation properties is performed by means of a dynamic impact test and the fatigue life of a particular asphalt mixture. An evaluation of the fatigue life is based on decreases in resistance or increases in deformations in different binders and mixtures. The test methods for the design and control of pavement construction materials determine the basic conditions valid for flexible matter. The Two-Point Bending Test was used for determining the deformation characteristics and the fatigue of asphalt mixtures at the Department of Construction Management in Zilina.

scholarly journals Prediction of fracture parameters for asphalt mixtures using semi-circular bending test

2020 ◽  
Vol 745 ◽  
pp. 012131
Author(s):  
Qais Sahib Banyhussan ◽  
Gofran J. Qasim ◽  
Ali M Al-Dahawi ◽  
Yaser H. Jabar
Keyword(s):  
Asphalt Mixtures ◽  
Bending Test ◽  
Fracture Parameters

Low Temperature Cracking Evaluation of Asphalt Rubber Mixtures Using Semi-Circular Bending Test

2011 ◽  
Vol 243-249 ◽  
pp. 4201-4206 ◽  
Author(s):  
Jing Hui Liu
Keyword(s):  
Low Temperature ◽  
Asphalt Concrete ◽  
Asphalt Mixtures ◽  
Bending Test ◽  
Asphalt Pavements ◽  
Dry Process ◽  
Wet Process ◽  
Asphalt Rubber ◽  
Scb Test ◽  
Low Temperature Cracking

Low temperature cracking is the main distress in asphalt pavements in winter. As asphalt rubber course is increasing, there is no standard method to characterize the resistance to cracking of asphalt rubber mixtures. This paper investigates the use of a Semi Circular Bend (SCB) test as a candidate for a low-temperature cracking specification. Based on the SCB test, this paper presents the findings of a laboratory study that aimed to evaluate the effects of recycled tire rubber on the Low temperature cracking properties of asphalt mixtures. Three mix types, a conventional hot-mix asphalt concrete, a dry process rubber modified asphalt concrete, and a wet process asphalt-rubber asphalt concrete, were included in the investigation. It is found that the asphalt mixtures produced by the wet process showed much better low temperature crack resistance, the binder effect modified by rubber was significant.

Mechanistic-Empirical Simulations and Life-Cycle Cost Analysis to Determine the Cost and Performance Effectiveness of Asphalt Mixtures Containing Recycled Materials

2018 ◽  
Vol 2672 (40) ◽  
pp. 143-154 ◽  
Author(s):  
Erdem Coleri ◽  
Yuqi Zhang ◽  
Blaine M. Wruck
Keyword(s):  
Life Cycle ◽  
Cost Analysis ◽  
Life Cycle Cost ◽  
Binder Content ◽  
Asphalt Mixtures ◽  
Fatigue Performance ◽  
Asphalt Pavements ◽  
Life Cycle Cost Analysis ◽  
Cost Benefits ◽  
The Cost

Use of reclaimed asphalt pavements (RAP) and recycled asphalt shingles (RAS) in asphalt paving, although considered as sustainable, is a practice that agencies are reluctant to employ because of the unpredictability of asphalt mixes containing recycled materials. The asphalt binder in RAP/RAS is aged and stiffened, which reduces ductility of the pavement. Consequentially, a pavement can exhibit unsatisfactory fatigue performance and have the potential for early cracking failure. Although methods exist to counteract the brittle behavior of pavements containing RAP/RAS (namely binder-grade bumping, binder-grade dumping and high binder content), they are not accounted for in mechanistic-empirical (ME) pavement design. Additionally, the cost benefits of using RAP/RAS in pavements are not easily calculated. For these reasons, characterization of fatigue performance for asphalt pavements containing RAP/RAS in ME design software needs to be accomplished and a life-cycle cost analysis (LCCA) framework for pavements containing RAP/RAS needs to be developed so that agencies can make informed decisions about RAP/RAS use in asphalt mixtures. In this study, laboratory test results for asphalt mixtures with different combinations of RAP/RAS contents, binder contents, and binder types were used to calculate ME pavement model coefficients to perform forward calculations to determine pavement performance. Using predicted performance from ME models, LCCAs were conducted to determine the cost benefits of using binder-grade bumping/dumping and high binder content in Oregon asphalt mixtures. These strategies are expected to increase RAP/RAS use in asphalt mixtures, reduce life-cycle costs, improve the cracking performance and encourage widespread use of RAP/RAS asphalt mixtures.

scholarly journals Fatigue Evaluation of Recycled Asphalt Mixture Based on Energy-Controlled Mode

2017 ◽  
Vol 2017 ◽  
pp. 1-7 ◽  
Author(s):  
Tao Ma ◽  
Kai Cui ◽  
Yongli Zhao ◽  
Xiaoming Huang
Keyword(s):  
Fatigue Life ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Fatigue Performance ◽  
Fatigue Properties ◽  
Dissipated Energy ◽  
Recycled Asphalt ◽  
Reclaimed Asphalt ◽  
Bending Fatigue Test ◽  
Fatigue Evaluation

The fatigue properties of asphalt mixtures are important inputs for mechanistic-empirical pavement design. To understand the fatigue properties of asphalt mixtures better and to predict the fatigue life of asphalt mixtures more precisely, the energy-controlled test mode was introduced. Based on the implementation theory, the laboratory practice for the energy-controlled mode was realized using a four-point-bending fatigue test with multiple-step loading. In this mode, the fatigue performance of typical AC-20 asphalt specimens with various reclaimed asphalt pavement (RAP) contents was tested and evaluated. Results show that the variation regulation of the dissipated energy and accumulative energy is compatible with the loading control principle, which proves the feasibility of the method. In addition, the fatigue life of the asphalt mixture in the energy-controlled mode was between that for the stress-controlled and strain-controlled modes. The specimen with a higher RAP content has a longer fatigue life and better fatigue performance.

scholarly journals Investigating the Effect of Using Waste Ultra-high-molecular-weight Polyethylene on the Fatigue Life of Asphalt Mixture

2020 ◽  
Author(s):  
Gholam Hossein Hamedi ◽  
Mohammad Hadizadeh Pirbasti ◽  
Zahra Ranjbar Pirbasti
Keyword(s):  
Molecular Weight ◽  
Fatigue Life ◽  
High Molecular Weight ◽  
Asphalt Binder ◽  
Fatigue Cracking ◽  
Polymeric Materials ◽  
Asphalt Mixtures ◽  
Effective Parameters ◽  
Stress Levels ◽  
Ultra High Molecular Weight

One of the effective parameters in the occurrence of fatigue cracking distress is the asphalt binder properties used, which must be controlled by appropriate asphalt binder or additives. In this study, the effect of using Ultra-High-Molecular-Weight Polyethylene (UHMWPE) was investigated on the fatigue cracking potential of asphalt mixtures. Two types of aggregates, asphalt binder performance grade (PG) 64-16, and UHMWPE additive in two percent of the asphalt binder were used in this study, which were tested at two temperatures and five different stress levels. Marshall mix design and indirect tensile fatigue test (ITFT) were used to determine the optimum content of the asphalt binder and the fatigue life of asphalt mixtures, respectively. The results of this study indicated that the application of polymer additives increased the fatigue life of the asphalt mixtures. The fatigue life of specimens made with granite aggregates was longer than those made with limestone aggregates, and the increased life due to the use of UHMWPE was longer in samples made with granite aggregates. As expected, increasing in temperature and stress levels reduced the fatigue life of the asphalt mixtures. This decrease was much lower in samples made of asphalt binder modified with polymeric materials than in control samples.

The fatigue behavior of polymeric sulfur-modified asphalt mixtures subjected to freeze-thaw conditioning

2019 ◽  
pp. 089270571988998 ◽  
Author(s):  
Amir Kavussi ◽  
Mehdi Azarnia ◽  
Pooyan Ayar ◽  
Makan Pedram
Keyword(s):  
Fatigue Life ◽  
Fatigue Behavior ◽  
Fatigue Cracking ◽  
Crumb Rubber ◽  
Asphalt Mixtures ◽  
Experimental Results ◽  
Moisture Sensitivity ◽  
Modified Asphalt ◽  
Freeze Thaw ◽  
Brittle Behavior

Abundance, affordability, and also the usability of sulfur as a part of the binder are the main reasons for using this additive in asphalt mixtures. However, lack of proper adhesion and brittle behavior of sulfur-modified asphalt mixtures could make them susceptible to moisture damage and fatigue cracking. In this regard, anti-stripping agents and some polymers like crumb rubber may be used to overcome these types of distresses. This research aimed at investigating the effects of polymeric sulfur and crumb rubber on the moisture sensitivity and fatigue behavior of asphalt mixtures. To this end, asphalt mixtures were subjected to 1 and 3 freeze-thaw cycles. Then, an indirect tensile fatigue test was carried out. Moreover, the response surface method (RSM) was used to assess the interaction between various parameters in samples containing polymeric sulfur and crumb rubber. Results showed that with an increase in polymeric sulfur content, the fatigue life was reduced and the moisture sensitivity was increased. Additionally, the RSM was found to be effective in ranking parameters influencing the performance of asphalt mixtures. According to the experimental results, a crumb rubber-modified binder could improve the fatigue life of the polymeric sulfur-modified mixture up to 70%. Furthermore, experimental results and RSM analysis indicated that crumb rubber would be more effective in higher numbers of freeze-thaw cycles and raised temperatures, in which polymeric sulfur-modified asphalt mixtures are probably prone to moisture damages (i.e. the lack of adequate cohesion and adhesion).

scholarly journals Mechanical Performance Characterization of Lignin-Modified Asphalt Mixture

2020 ◽  
Vol 10 (9) ◽  
pp. 3324
Author(s):  
Yi Zhang ◽  
Xuancang Wang ◽  
Guanyu Ji ◽  
Zhenyang Fan ◽  
Yuchen Guo ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Performance ◽  
Asphalt Mixture ◽  
Fatigue Cracking ◽  
Asphalt Mixtures ◽  
Bending Test ◽  
Cracking Resistance ◽  
Moisture Susceptibility ◽  
Modified Asphalt ◽  
Wheel Loading

Lignin, as a bio-based waste, has been utilized in the asphalt industry due to various advantages. This study aimed to investigate the effects of two lignin products (lignin powder and lignin fiber) on the mechanical properties of asphalt mixtures. The raveling, rutting, thermal and fatigue cracking resistance, and moisture susceptibility of different asphalt mixtures were respectively evaluated by the Cantabro test, wheel loading tracking test, semicircular bending test, four-point beam bending test, and freezing-thaw cyclic test. Results show that asphalt mixture with lignin powder-modified asphalt improved the overall mechanical performance. However, lignin fiber showed contradictory effects on certain mechanical properties, i.e., improved rutting resistance and thermal cracking resistance of asphalt mixture, degraded abrasion resistance, fatigue performance, and moisture stability. Therefore, cautions need to be taken when incorporating lignin fiber into asphalt mixture.

Sign in / Sign up

Export Citation Format

Share Document