scholarly journals Development of a novel hybrid bioactive hydrogel for future clinical applications

2018 ◽  
Vol 33 (3) ◽  
pp. 447-465 ◽  
Author(s):  
Lydia Francis ◽  
Karin V Greco ◽  
Aldo R Boccaccini ◽  
Judith J Roether ◽  
Nicholas R English ◽  
...  
Keyword(s):  
Clinical Application ◽  
Cellular Proliferation ◽  
Soft Tissues ◽  
Structural Integrity ◽  
Mechanical Stability ◽  
Cartilage Tissue ◽  
Compression Tests ◽  
Control Tissue ◽  
Acellular Tissue

Three-dimensional hydrogels are ideal for tissue engineering applications due to their structural integrity and similarity to native soft tissues; however, they can lack mechanical stability. Our objective was to develop a bioactive and mechanically stable hydrogel for clinical application. Auricular cartilage was decellularised using a combination of hypertonic and hypotonic solutions with and without enzymes to produce acellular tissue. Methacryloyl groups were crosslinked with alginate and PVA main chains via 2-aminoethylmathacrylate and the entire macromonomer further crosslinked with the acellular tissue. The resultant hydrogels were characterised for its physicochemical properties (using NMR), in vitro degradation (via GPC analysis), mechanical stability (compression tests) and in vitro biocompatibility (co-culture with bone marrow-derived mesenchymal stem cells). Following decellularisation, the cartilage tissue showed to be acellular at a significant level (DNA content 25.33 ng/mg vs. 351.46 ng/mg control tissue), with good structural and molecular integrity of the retained extra cellular matrix (s-GAG= 0.19 μg/mg vs. 0.65 μg/mg ±0.001 control tissue). Proteomic analysis showed that collagen subtypes and proteoglycans were retained, and SEM and TEM showed preserved matrix ultra-structure. The hybrid hydrogel was successfully cross-linked with biological and polymer components, and it was stable for 30 days in simulated body fluid (poly dispersal index for alginate with tissue was stable at 1.08 and for PVA with tissue was stable at 1.16). It was also mechanically stable (Young’s modulus of 0.46 ± 0.31 KPa) and biocompatible, as it was able to support the development of a multi-cellular feature with active cellular proliferation in vitro. We have shown that it is possible to successfully combine biological tissue with both a synthetic and natural polymer and create a hybrid bioactive hydrogel for clinical application.

scholarly journals Tuning the Properties of PNIPAm-Based Hydrogel Scaffolds for Cartilage Tissue Engineering

Polymers ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 3154
Author(s):  
Md Mohosin Rana ◽  
Hector De la Hoz Siegler
Keyword(s):  
Tissue Engineering ◽  
Physical Properties ◽  
Tissue Regeneration ◽  
Structural Integrity ◽  
Cartilage Tissue ◽  
Design Parameters ◽  
Comprehensive Overview ◽  
Hydrogel Scaffolds ◽  
Design Variables

Poly(N-isopropylacrylamide) (PNIPAm) is a three-dimensional (3D) crosslinked polymer that can interact with human cells and play an important role in the development of tissue morphogenesis in both in vitro and in vivo conditions. PNIPAm-based scaffolds possess many desirable structural and physical properties required for tissue regeneration, but insufficient mechanical strength, biocompatibility, and biomimicry for tissue development remain obstacles for their application in tissue engineering. The structural integrity and physical properties of the hydrogels depend on the crosslinks formed between polymer chains during synthesis. A variety of design variables including crosslinker content, the combination of natural and synthetic polymers, and solvent type have been explored over the past decade to develop PNIPAm-based scaffolds with optimized properties suitable for tissue engineering applications. These design parameters have been implemented to provide hydrogel scaffolds with dynamic and spatially patterned cues that mimic the biological environment and guide the required cellular functions for cartilage tissue regeneration. The current advances on tuning the properties of PNIPAm-based scaffolds were searched for on Google Scholar, PubMed, and Web of Science. This review provides a comprehensive overview of the scaffolding properties of PNIPAm-based hydrogels and the effects of synthesis-solvent and crosslinking density on tuning these properties. Finally, the challenges and perspectives of considering these two design variables for developing PNIPAm-based scaffolds are outlined.

Standardization of a Method for Characterizing Low-Concentration Biogels: Elastic Properties of Low-Concentration Agarose Gels

1999 ◽  
Vol 121 (2) ◽  
pp. 184-187 ◽  
Author(s):  
M. Benkherourou ◽  
C. Rochas ◽  
P. Tracqui ◽  
L. Tranqui ◽  
P. Y. Gume´ry
Keyword(s):  
Extracellular Matrix ◽  
Soft Tissues ◽  
Compression Tests ◽  
Low Concentration ◽  
Mechanical Responses ◽  
Young’S Moduli ◽  
Biological Phenomena ◽  
Low Concentrations ◽  
Gel Technique

Low-concentration biogels, which provide an extracellular matrix for cells in vitro, are involved in a number of important cell biological phenomena, such as cell motility and cell differentiation. In order to characterize soft tissues, which collapse under their own weight, we developed and standardized a new experimental device that enabled us to analyze the mechanical properties of floating biogels with low concentrations, i.e., with values ranging from 2 g/L to 5 g/L. In order to validate this approach, the mechanical responses of free floating agarose gel samples submitted to compression as well as stretching tests were quantified. The values of the Young’s moduli, measured in the range of 1000 to 10,000 Pa, are compared to the values obtained from other experimental techniques. Our results showed indeed that the values we obtained with our device closely match those obtained independently by performing compression tests on an Instron device. Thus, the floating gel technique is a useful tool first to characterize and then to model soft tissues that are used in biological science to study the interaction between cell and extracellular matrix.

scholarly journals 3D bioprinting dual-factor releasing and gradient-structured constructs ready to implant for anisotropic cartilage regeneration

2020 ◽  
Vol 6 (37) ◽  
pp. eaay1422 ◽  
Author(s):  
Ye Sun ◽  
Yongqing You ◽  
Wenbo Jiang ◽  
Bo Wang ◽  
Qiang Wu ◽  
...  
Keyword(s):  
Large Scale ◽  
Structural Integrity ◽  
Three Dimensional ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
3D Bioprinting ◽  
Deep Layers ◽  
Joint Prostheses

Cartilage injury is extremely common and leads to joint dysfunction. Existing joint prostheses do not remodel with host joint tissue. However, developing large-scale biomimetic anisotropic constructs mimicking native cartilage with structural integrity is challenging. In the present study, we describe anisotropic cartilage regeneration by three-dimensional (3D) bioprinting dual-factor releasing and gradient-structured constructs. Dual-factor releasing mesenchymal stem cell (MSC)–laden hydrogels were used for anisotropic chondrogenic differentiation. Together with physically gradient synthetic biodegradable polymers that impart mechanical strength, the 3D bioprinted anisotropic cartilage constructs demonstrated whole-layer integrity, lubrication of superficial layers, and nutrient supply in deep layers. Evaluation of the cartilage tissue in vitro and in vivo showed tissue maturation and organization that may be sufficient for translation to patients. In conclusion, one-step 3D bioprinted dual-factor releasing and gradient-structured constructs were generated for anisotropic cartilage regeneration, integrating the feasibility of MSC- and 3D bioprinting–based therapy for injured or degenerative joints.

Correlation Between Cellular Functions and Morphological Changes of Human Trophoblast in Vitro

1975 ◽  
Vol 33 ◽  
pp. 600-601
Author(s):  
John C. Garancis ◽  
Robert O. Hussa ◽  
Michael T. Story ◽  
Donald Yorde ◽  
Roland A. Pattillo
Keyword(s):  
Electron Microscopy ◽  
Cellular Proliferation ◽  
Morphological Changes ◽  
Culture Fluid ◽  
Cellular Functions ◽  
Human Trophoblast ◽  
Transmission Electron ◽  
Marked Activity ◽  
Malignant Trophoblast

Human malignant trophoblast cells in continuous culture were incubated for 3 days in medium containing 1 mM N6-O2'-dibutyryl cyclic adenosine 3':5'-monophosphate (dibutyryl cyclic AMP) and 1 mM theophylline. The culture fluid was replenished daily. Stimulated cultures secreted many times more chorionic gonadotropin and estrogens than did control cultures in the absence of increased cellular proliferation. Scanning electron microscopy revealed remarkable surface changes of stimulated cells. Control cells (not stimulated) were smooth or provided with varying numbers of microvilli (Fig. 1). The latter, usually, were short and thin. The surface features of stimulated cells were considerably different. There was marked increase of microvilli which appeared elongated and thick. Many cells were covered with confluent polypoid projections (Fig. 2). Transmission electron microscopy demonstrated marked activity of cytoplasmic organelles. Mitochondria were increased in number and size; some giant forms with numerous cristae were observed.

Structural integrity after cold storage of human epidermal model in hypothermosol: A correlative ultrastructural and fluorescent assay

1994 ◽  
Vol 52 ◽  
pp. 270-271
Author(s):  
Henry H. Eichelberger ◽  
John G. Baust ◽  
Robert G. Van Buskirk
Keyword(s):  
Cold Storage ◽  
Structural Integrity ◽  
Culture Media ◽  
Cell Structure ◽  
Natural State ◽  
Sodium Cacodylate ◽  
Ruthenium Tetroxide ◽  
Cacodylate Buffer ◽  
Before And After

For research in cell differentiation and in vitro toxicology it is essential to provide a natural state of cell structure as a benchmark for interpreting results. Hypothermosol (Cryomedical Sciences, Rockville, MD) has proven useful in insuring the viability of synthetic human epidermis during cold-storage and in maintaining the epidermis’ ability to continue to differentiate following warming.Human epidermal equivalent, EpiDerm (MatTek Corporation, Ashland, MA) consisting of fully differentiated stratified human epidermal cells were grown on a microporous membrane. EpiDerm samples were fixed before and after cold-storage (4°C) for 5 days in Hypothermosol or skin culture media (MatTek Corporation) and allowed to recover for 7 days at 37°C. EpiDerm samples were fixed 1 hour in 2.5% glutaraldehyde in sodium cacodylate buffer (pH 7.2). A secondary fixation with 0.2% ruthenium tetroxide (Polysciences, Inc., Warrington, PA) in sodium cacodylate was carried out for 3 hours at 4°C. Other samples were similarly fixed, but with 1% Osmium tetroxide in place of ruthenium tetroxide. Samples were dehydrated through a graded acetone series, infiltrated with Spurrs resin (Polysciences Inc.) and polymerized at 70°C.

Biological and biomedical applications of collagenous biomaterials

1990 ◽  
Vol 48 (3) ◽  
pp. 856-857
Author(s):  
Yasushi P. Kato ◽  
Michael G. Dunn ◽  
Frederick H. Silver ◽  
Arthur J. Wasserman
Keyword(s):  
Biomedical Applications ◽  
Soft Tissues ◽  
Collagen Fibers ◽  
Bone Collagen ◽  
Cover Slip ◽  
Fibroblast Migration ◽  
Cellular Expression ◽  
Defect Repair

Collagenous biomaterials have been used for growing cells in vitro as well as for augmentation and replacement of hard and soft tissues. The substratum used for culturing cells is implicated in the modulation of phenotypic cellular expression, cellular orientation and adhesion. Collagen may have a strong influence on these cellular parameters when used as a substrate in vitro. Clinically, collagen has many applications to wound healing including, skin and bone substitution, tendon, ligament, and nerve replacement. In this report we demonstrate two uses of collagen. First as a fiber to support fibroblast growth in vitro, and second as a demineralized bone/collagen sponge for radial bone defect repair in vivo.For the in vitro study, collagen fibers were prepared as described previously. Primary rat tendon fibroblasts (1° RTF) were isolated and cultured for 5 days on 1 X 15 mm sterile cover slips. Six to seven collagen fibers, were glued parallel to each other onto a circular cover slip (D=18mm) and the 1 X 15mm cover slip populated with 1° RTF was placed at the center perpendicular to the collagen fibers. Fibroblast migration from the 1 x 15mm cover slip onto and along the collagen fibers was measured daily using a phase contrast microscope (Olympus CK-2) with a calibrated eyepiece. Migratory rates for fibroblasts were determined from 36 fibers over 4 days.

An in vitro model for investigation of vitamin A effects on wound healing

2021 ◽  
pp. 1-6
Author(s):  
Hoda Keshmiri Neghab ◽  
Mohammad Hasan Soheilifar ◽  
Gholamreza Esmaeeli Djavid
Keyword(s):  
Wound Healing ◽  
Endothelial Cell ◽  
Vitamin A ◽  
In Vitro Model ◽  
Cellular Proliferation ◽  
Endothelial Cell Migration ◽  
Normal Fibroblast ◽  
Anti Inflammatory ◽  
Vitro Model

Abstract. Wound healing consists of a series of highly orderly overlapping processes characterized by hemostasis, inflammation, proliferation, and remodeling. Prolongation or interruption in each phase can lead to delayed wound healing or a non-healing chronic wound. Vitamin A is a crucial nutrient that is most beneficial for the health of the skin. The present study was undertaken to determine the effect of vitamin A on regeneration, angiogenesis, and inflammation characteristics in an in vitro model system during wound healing. For this purpose, mouse skin normal fibroblast (L929), human umbilical vein endothelial cell (HUVEC), and monocyte/macrophage-like cell line (RAW 264.7) were considered to evaluate proliferation, angiogenesis, and anti-inflammatory responses, respectively. Vitamin A (0.1–5 μM) increased cellular proliferation of L929 and HUVEC (p < 0.05). Similarly, it stimulated angiogenesis by promoting endothelial cell migration up to approximately 4 fold and interestingly tube formation up to 8.5 fold (p < 0.01). Furthermore, vitamin A treatment was shown to decrease the level of nitric oxide production in a dose-dependent effect (p < 0.05), exhibiting the anti-inflammatory property of vitamin A in accelerating wound healing. These results may reveal the therapeutic potential of vitamin A in diabetic wound healing by stimulating regeneration, angiogenesis, and anti-inflammation responses.

Hydrogels: A Versatile Drug Delivery Carrier Systems

1970 ◽  
Vol 5 (3) ◽  
pp. 1745-1756
Author(s):  
L H Baldaniya ◽  
Sarkhejiya N A
Keyword(s):  
Drug Delivery ◽  
Protein Delivery ◽  
Structural Integrity ◽  
Healing Process ◽  
Polymer Chains ◽  
Wound Healing Process ◽  
Aqueous Environment ◽  
Preparation Methods ◽  
Control Drug

Hydrogels are the material of choice for many applications in regenerative medicine due to their unique properties including biocompatibility, flexible methods of synthesis, range of constituents, and desirable physical characteristics. Hydrogel (also called Aquagel) is a network of polymer chains that are hydrophilic, sometimes found as a colloidal gel in which water is the dispersion medium. Hydrogels are highly absorbent (contain ~99.9% water), natural or synthetic polymers. Hydrogel also possess a degree of flexibility very similar to natural tissue, due to its significant water content. It can serve as scaffolds that provide structural integrity to tissue constructs, control drug and protein delivery to tissues and cultures. Also serve as adhesives or barriers between tissue and material surfaces. The positive effect of hydrogels on wounds and enhanced wound healing process has been proven. Hydrogels provide a warm, moist environment for wound that makes it heal faster in addition to its useful mucoadhesive properties. Moreover, hydrogels can be used as carriers for liposomes containing variety of drugs, such as antimicrobial drugs. Hydrogels are water swollen polymer matrices, with a tendency to imbibe water when placed in aqueous environment. This ability to swell, under biological conditions, makes it an ideal material for use in drug delivery and immobilization of proteins, peptides, and other biological compounds. Hydrogels have been extensively investigated for use as constructs to engineer tissues in vitro. This review describes the properties, classification, preparation methods, applications, various monomer used in formulation and development of hydrogel products.

3D Culture Modelling: An Emerging Approach for Translational Cancer Research in Sarcomas

2020 ◽  
Vol 27 (29) ◽  
pp. 4778-4788 ◽  
Author(s):  
Victoria Heredia-Soto ◽  
Andrés Redondo ◽  
José Juan Pozo Kreilinger ◽  
Virginia Martínez-Marín ◽  
Alberto Berjón ◽  
...  
Keyword(s):  
High Throughput Screening ◽  
Cancer Biology ◽  
Soft Tissues ◽  
Three Dimensional ◽  
3D Culture ◽  
Resistance Mechanisms ◽  
In Vitro Models ◽  
Tumour Spheroids ◽  
Current Therapies

Sarcomas are tumours of mesenchymal origin, which can arise in bone or soft tissues. They are rare but frequently quite aggressive and with a poor outcome. New approaches are needed to characterise these tumours and their resistance mechanisms to current therapies, responsible for tumour recurrence and treatment failure. This review is focused on the potential of three-dimensional (3D) in vitro models, including multicellular tumour spheroids (MCTS) and organoids, and the latest data about their utility for the study on important properties for tumour development. The use of spheroids as a particularly valuable alternative for compound high throughput screening (HTS) in different areas of cancer biology is also discussed, which enables the identification of new therapeutic opportunities in commonly resistant tumours.

Assessing the Antimalarial Potentials of Phytochemicals: Virtual Screening, Molecular Dynamics and In-Vitro Investigations

2019 ◽  
Vol 16 (3) ◽  
pp. 291-300
Author(s):  
Saumya K. Patel ◽  
Mohd Athar ◽  
Prakash C. Jha ◽  
Vijay M. Khedkar ◽  
Yogesh Jasrai ◽  
...  
Keyword(s):  
Molecular Dynamics ◽  
Structural Integrity ◽  
Md Simulations ◽  
Tylophora Indica ◽  
Multidrug Resistance Protein 1 ◽  
Receptor Complexes ◽  
Resistance Protein ◽  
Dynamics Simulations ◽  
Stable Trajectory

Background: Combined in-silico and in-vitro approaches were adopted to investigate the antiplasmodial activity of Catharanthus roseus and Tylophora indica plant extracts as well as their isolated components (vinblastine, vincristine and tylophorine). </P><P> Methods: We employed molecular docking to prioritize phytochemicals from a library of 26 compounds against Plasmodium falciparum multidrug-resistance protein 1 (PfMDR1). Furthermore, Molecular Dynamics (MD) simulations were performed for a duration of 10 ns to estimate the dynamical structural integrity of ligand-receptor complexes. </P><P> Results: The retrieved bioactive compounds viz. tylophorine, vinblastin and vincristine were found to exhibit significant interacting behaviour; as validated by in-vitro studies on chloroquine sensitive (3D7) as well as chloroquine resistant (RKL9) strain. Moreover, they also displayed stable trajectory (RMSD, RMSF) and molecular properties with consistent interaction profile in molecular dynamics simulations. </P><P> Conclusion: We anticipate that the retrieved phytochemicals can serve as the potential hits and presented findings would be helpful for the designing of malarial therapeutics.

Sign in / Sign up

Export Citation Format

Share Document