scholarly journals Multi-Wall Carbon Nanotubes Chemically Grafted and Physically Adsorpted on Reinforcing Carbon Fibres

2008 ◽  
Vol 17 (3) ◽  
pp. 096369350801700 ◽  
Author(s):  
P. Karapappas ◽  
S. Tsantzalis ◽  
E. Fiamegou ◽  
A. Vavouliotis ◽  
K. Dassios ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Acid Solution ◽  
Matrix Material ◽  
Carbon Fibres ◽  
Reinforced Polymers ◽  
Reinforcing Effect ◽  
Multi Wall Carbon Nanotubes ◽  
The Matrix ◽  
Carbon Fibre Reinforced Polymers

Carbon nanotubes (CNTs) because of their properties are alleged to be the key candidate additives for improving the mechanical properties of polymers and carbon fibre reinforced polymers (CFRPs). Nevertheless in order for the reinforcing effect of the nanotubes to be of practical use, the CNTs have to be mixed with the matrix material. In the current work an effort was made to chemically graft Multi-Wall Carbon Nanotubes (MWCNTs) on the actual reinforcing Carbon Fibres (CFs) in order to skip the sometimes complex mixing stage. Two different solutions were used in order to treat/prepare the CNTs; a) an acid solution of H2SO4/HNO3 and, b) a toluene solution. The treated CFs were added to each solution, sonic bathed with deionised water and then dried in an oven. The resulting CFs were examined under SEM and both the solutions used proved to be reasonable successful with further investigation/optimisation to be necessary.

Properties of Second Life Carbon Fibre Reinforced Polymers

2017 ◽  
Vol 742 ◽  
pp. 562-567
Author(s):  
Frank Manis ◽  
Maren Schmieg ◽  
Michael Sauer ◽  
Klaus Drechsler
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Carbon Fibre ◽  
Glass Fibre ◽  
Second Life ◽  
Carbon Fibres ◽  
High Alloy ◽  
Reinforced Polymers ◽  
Carbon Fibre Reinforced Polymers ◽  
Alloy Steels

In this study different materials made out of cut-off as well as reclained carbon fibres (rCF) are described and compared. For this benchmark nonwovens, compounds, SMC, BMC, as well as standard lightweight materials like high alloy steels, aluminium and magnesium are taken into account. Specific mechanical properties like modulus and tensile strength are used to show the lightweight potential of recycled carbon fibre materials in ashby charts. It is shown that rCF products can substitute glass fibre applications and are also comparable to metals and alloys.

scholarly journals Comparative Physical–Mechanical Properties Assessment of Tailored Surface-Treated Carbon Fibres

Materials ◽  
2020 ◽  
Vol 13 (14) ◽  
pp. 3136 ◽  
Author(s):  
Dionisis Semitekolos ◽  
Aikaterini-Flora Trompeta ◽  
Iryna Husarova ◽  
Tamara Man’ko ◽  
Aleksandr Potapov ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Plasma Treatment ◽  
Electrochemical Oxidation ◽  
Matrix Material ◽  
Electrochemical Treatment ◽  
Carbon Fibres ◽  
The Matrix ◽  
Inert Surface ◽  
Treated Carbon ◽  
Active Screen

Carbon Fibres (CFs) are widely used in textile-reinforced composites for the construction of lightweight, durable structures. Since their inert surface does not allow effective bonding with the matrix material, the surface treatment of fibres is suggested to improve the adhesion between the two. In the present study, different surface modifications are compared in terms of the mechanical enhancement that they can offer to the fibres. Two main advanced technologies have been investigated; namely, plasma treatment and electrochemical treatment. Specifically, active screen plasma and low-pressure plasma were compared. Regarding the electrochemical modification, electrochemical oxidation and electropolymerisation of monomer solutions of acrylic and methacrylic acids, acrylonitrile and N-vinyl pyrrolidine were tested for HTA-40 CFs. In order to assess the effects of the surface treatments, the morphology, the physicochemical properties, as well as the mechanical integrity of the fibres were investigated. The CF surface and polymeric matrix interphase adhesion in composites were also analysed. The improvement of the carbon fibre’s physical–mechanical properties was evident for the case of the active screen plasma treatment and the electrochemical oxidation.

Enhancement of Mechanical Properties by Reinforcing Magnesium With Ni-Coated Carbon Nanotubes

2010 ◽  
Author(s):  
M. H. Nai ◽  
C. S. Goh ◽  
S. M. L. Nai ◽  
J. Wei ◽  
M. Gupta
Keyword(s):  
Carbon Nanotubes ◽  
Load Transfer ◽  
Matrix Material ◽  
Strength Based ◽  
The Matrix ◽  
Rapid Sintering ◽  
Reinforcing Material ◽  
Coated Carbon ◽  
Strength And Ductility ◽  
Walled Cnts

In this study, carbon nanotubes (CNTs) are coated with nickel (Ni) to improve the wettability of the CNT surface and metal matrix, and allow an effective load transfer from the matrix to nanotubes. Pure magnesium is used as the matrix material and different weight percentages of Ni-coated multi-walled CNTs are incorporated as the reinforcing material. The nanocomposite materials are synthesized using the powder metallurgy route followed by microwave assisted rapid sintering. Mechanical property characterizations reveal an improvement of 0.2% yield strength, ultimate tensile strength and ductility with the addition of Ni-CNTs. As such, Ni-coated CNTs can be used as a reinforcement in magnesium to improve the formability of the material for light-weight, strength-based applications.

scholarly journals Microstructural analysis of Al6063/sic with calcium additives for hardness enhancement

2018 ◽  
Vol 225 ◽  
pp. 03007
Author(s):  
Balaji Bakthavatchalam ◽  
Khairul Habib ◽  
Namdev Patil ◽  
Omar A Hussein
Keyword(s):  
Mechanical Properties ◽  
Silicon Carbide ◽  
Matrix Material ◽  
Microstructural Analysis ◽  
Wear Loss ◽  
Alloying Element ◽  
Silicon Phase ◽  
High Durability ◽  
The Matrix ◽  
Al6063 Alloy

Microstructural Analysis plays an important role in enhancing the mechanical properties of metals and composites. Usually Aluminium Silicon Carbide (Al6063/SiC) alloys are mixed with strontium, sodium and antimony for high durability even though they are toxic and costly. As an alternative calcium is used as an alloying element to improve the mechanical property of Al6063/Sic alloy. In this paper Al6063 is chosen as the matrix material while Sic is used as a reinforcement where calcium powder is added to modify the silicon phase of the composite. Finally, concentration of Silicon carbide is varied from 0 to 150 mg to produce four specimens of Al6063 alloy and it is subjected to microstructure analysis which showed the reduction of grain size and therefore improvement in the hardness from 52.9 HV to 58.4 HV and decrease in the wear loss from 3.97 to 3.27 percentage.

Physical and Mechanical Properties of Composites with Aluminum Alloy Matrix Designed for Metal Forming

2013 ◽  
Vol 212 ◽  
pp. 59-62 ◽  
Author(s):  
Jerzy Myalski ◽  
Jakub Wieczorek ◽  
Adam Płachta
Keyword(s):  
Mechanical Properties ◽  
Metal Forming ◽  
Matrix Material ◽  
Physical And Mechanical Properties ◽  
Mechanical Mixing ◽  
Alloy Matrix ◽  
Segregation Process ◽  
The Matrix ◽  
Glass Carbon ◽  
Properties Of Composites

The change of matrix and usage of the aluminum alloys designed for the metal forming in making the composite suspension allows to extend the processing possibility of this type of materials. The possibility of the metal forming of the composites obtained by mechanical mixing will extend the range of composite materials usage. Applying of the metal forming e.g. matrix forging, embossing, pressing or rolling, will allow to remove the incoherence of the structure created while casting and removing casting failures. In order to avoid the appearance of the casting failures the homogenization conditions need to be changed. Inserting the particles into the matrix influences on the shortening of the composite solidification. The type of the applied particles influenced the sedimentation process and reinforcement agglomeration in the structure of the composite. Opposite to the composites reinforced with one-phase particles applying the fasess mixture (glassy carbon and silicon carbide) triggered significant limitation in the segregation process while casting solidification. Inserting the particles into the AW-AlCu2SiMn matrix lowers the mechanical properties tension and impact value strength. The most beneficial mechanical properties were gained in case of heterofasess composites reinforced with the particle mixture of SiC and glass carbon. The chemical composition of the matrix material (AW-AlCu2SiMn) allows to increase additionally mechanical characteristics by the precipitation hardening reached through heat casting forming.

INNOVATIVE MANUFACTURING OF CARBON NANOTUBE-LOADED FIBRILLAR POLYMER COMPOSITES

2010 ◽  
Vol 24 (15n16) ◽  
pp. 2459-2465 ◽  
Author(s):  
R. J. T. LIN ◽  
D. BHATTACHARYYA ◽  
S. FAKIROV
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Polymer Composites ◽  
Polyamide 66 ◽  
Screw Extruder ◽  
Enhancing Effect ◽  
The Matrix ◽  
Twin Screw ◽  
New Type ◽  
Scanning Electron

The concept of microfibrillar composite (MFC) has been used to create a new type of polymer composites, in which the reinforcing microfibrils are loaded with carbon nanotubes (CNT). Polyamide 66 (PA66) has been melt blended with polypropylene in a twin screw extruder with and without CNT, and thereafter cold drawn to create a fibrillar state as well as to align the CNT in the PA66 microfibrils. The drawn bristles were compression moulded at 180°C to prepare MFC plates. The scanning electron microscope (SEM) observations indicate near perfect distribution of CNT in the reinforcing PA66 microfibrils. Although the fibrillated PA66 is able to improve the tensile stiffness and strength as expected from the MFC structure, the incorporation of CNT does not exhibit any further enhancing effect. It rather adversely affects the mechanical properties due to poor interface adhesion between the matrix and the reinforcing microfibrils with the presence of CNT, as demonstrated by SEM. However, the resulting highly aligned CNT within the MFC are expected to affect the physical and functional properties of these composites.

scholarly journals Effect of Increasing the Strength of Aluminum Matrix Nanocomposites Reinforced with Microadditions of Multiwalled Carbon Nanotubes Coated with TiC Nanoparticles

Nanomaterials ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 1596 ◽  
Author(s):  
Artemiy Aborkin ◽  
Kirill Khorkov ◽  
Evgeny Prusov ◽  
Anatoly Ob’edkov ◽  
Kirill Kremlev ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Multiwalled Carbon Nanotubes ◽  
Aluminum Matrix ◽  
High Energy ◽  
High Tech ◽  
Multiwalled Carbon ◽  
The Matrix ◽  
Tic Nanoparticles ◽  
Matrix Nanocomposites

Aluminum matrix composites reinforced with multiwalled carbon nanotubes (MWCNTs) are promising materials for applications in various high-tech industries. Control over the processes of interfacial interaction in Al/MWCNT composites is important to achieve a high level of mechanical properties. The present study describes the effects of coating MWCNTs with titanium carbide nanoparticles on the formation of mechanical properties and the evolution of the reinforcement structure in bulk aluminum matrix nanocomposites with low concentrations of MWCNTs under conditions of solid-phase consolidation of ball-milled powder mixtures. Using high-energy ball milling and uniaxial hot pressing, two types of bulk nanocomposites based on aluminum alloy AA5049 that were reinforced with microadditions of MWCNTs and MWCNTs coated with TiC nanoparticles were successfully produced. The microstructural and mechanical properties of the Al/MWCNT composites were investigated. The results showed that, on the one hand, the TiC nanoparticles on the surface of the MWCNT hybrid reinforcement reduced the damage of reinforcement under the intense exposure of milling bodies, and on the other hand, they reduced the contact area of the MWCNTs with the matrix material (acting as a barrier interface), which also locally inhibited the reaction between the matrix and the MWCNTs.

scholarly journals Time-Stability Dispersion of MWCNTs for the Improvement of Mechanical Properties of Portland Cement Specimens

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4149
Author(s):  
Laura M. Echeverry-Cardona ◽  
Natalia Álzate ◽  
Elisabeth Restrepo-Parra ◽  
Rogelio Ospina ◽  
Jorge H. Quintero-Orozco
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Raman Spectroscopy ◽  
Portland Cement ◽  
Time Stability ◽  
Cement Pastes ◽  
Multi Wall Carbon Nanotubes ◽  
Vis Spectroscopy ◽  
The Stability ◽  
Over Time

This study shows the energy optimization and stabilization in the time of solutions composed of H2O + TX-100 + Multi-Wall Carbon Nanotubes (MWCNTs), used to improve the mechanical properties of Portland cement pastes. For developing this research, sonication energies at 90, 190, 290, 340, 390, 440, 490 and 590 J/g are applied to a colloidal substance (MWCNTs/TX-100 + H2O) with a molarity of 10 mM. Raman spectroscopy analyses showed that, for energies greater than 440 J/g, there are ruptures and fragmentation of the MWCNTs; meanwhile at energies below 390 J/g, better dispersions are obtained. The stability of the dispersion over time was evaluated over 13 weeks using UV-vis spectroscopy and Zeta Potential. With the most relevant data collected, sonication energies of 190, 390 and 490 J/g, at 10 mM were selected at the first and the fourth week of storage to obtain Portland cement specimens. Finally, we found an improvement of the mechanical properties of the samples built with Portland cement and solutions stored for one and four weeks; it can be concluded that the MWCNTs improved the hydration period.

Sign in / Sign up

Export Citation Format

Share Document