High-speed impact and mechanical strength of ZrO2/polycarbonate nanocomposite

2016 ◽  
Vol 26 (7) ◽  
pp. 989-1002 ◽  
Author(s):  
Yasser Rostamiyan ◽  
Amir Ferasat
Keyword(s):  
Mechanical Strength ◽  
High Speed ◽  
Impact Resistance ◽  
High Velocity Impact ◽  
Neat Polymer ◽  
Buckling Strength ◽  
High Speed Impact ◽  
Transmission Electron ◽  
Izod Impact ◽  
The Impact

This study empirically investigates the mechanical strength and high-speed impact resistance of polycarbonate matrix reinforced with different amounts of nano-ZrO2. In order to enhance the mechanical strength of polycarbonate, especially the impact resistance, the nanoparticles were added to polycarbonate matrix as filler with the ratios of 1, 2, 3 and 5% of the composite’s total weight. Transmission electron microscope was utilized for the observation of microscopic structure of the composites, and it revealed an exceptional homogeneous mixture of ZrO2 particles in the polycarbonate matrix. From the results of the tests, it was figured out that adding 1–3 wt% of nano-ZrO2 into polycarbonate remarkably increased the impact resistance of the composite. The results also showed that adding 1 and 2 wt% of nano-ZrO2 to polycarbonate had the most desirable effects on the enhancement of tensile, bending and buckling strength; however, the composites with 3 wt% of nano-ZrO2 had the greatest Izod impact and high-velocity impact resistance. Finally for the impact tests, it was revealed that adding large amounts of nano-ZrO2 (more than 3 wt%) would decrease the mechanical strength of ZrO2/polycarbonate nanocomposite specimens; thus, the fracture occurred, while less energy was absorbed compared with the neat polymer.

High and Low Speed Impact Characteristics of Nanocomposites

2015 ◽  
Vol 1105 ◽  
pp. 62-66 ◽  
Author(s):  
Saud Aldajah ◽  
Yousef Haik ◽  
Kamal Moustafa ◽  
Ammar Alomari
Keyword(s):  
High Speed ◽  
Impact Resistance ◽  
Absorption Capacity ◽  
Impact Testing ◽  
Energy Absorption Capacity ◽  
Low Speed ◽  
High Speed Impact ◽  
Bulletproof Vest ◽  
Impact Characteristics ◽  
The Impact

Nanocomposites attracted the attention of scientists due to their superior mechanical, thermal, chemical and electrical properties. This research studied the impact of adding carbon nanotubes (CNTs) to the woven Kevlar laminated composites on the high and low speed impact characteristics. Different percentages of CNTs were added to the woven Kevlar-Vinylester composite materials. An in-house developed drop weight testing apparatus was utilized for the low speed impact testing. Two different concentrations of the CNTs were added to a 15-layer woven Kevlar laminates, 0.32 wt% and 0.8 wt%. The results showed that: The 0.32 wt % CNT sample enhanced the interlaminar strength of the composite without enhancing the energy absorption capacity whereas, the 0.8 wt % CNT sample did not improve the impact resistance of the Kevlar composite.For the high speed impact tests, a bulletproof vest was prepared using woven Kevlar, resin, and CNTs at 1.5 w% percentage. The ballistic shooting was carried out by a professional shooter using a 30 caliber and 9 mm bullets for the tests. The CNT bulletproof sample bounced back the 30 caliber copper alloy bullet with no penetration.

scholarly journals Preparation of poly(ionic liquid)/multi-walled carbon nanotube fillers using divinylbenzene as a linker to enhance the impact resistance of polyurethane elastomers

RSC Advances ◽  
2022 ◽  
Vol 12 (3) ◽  
pp. 1777-1787
Author(s):  
Zehui Xiang ◽  
Fan Hu ◽  
Xueyan Wu ◽  
Fugang Qi ◽  
Biao Zhang ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Carbon Nanotube ◽  
High Speed ◽  
Impact Resistance ◽  
Polyurethane Elastomers ◽  
High Speed Impact ◽  
Multi Walled Carbon Nanotube ◽  
Carbon Nanotube Composite ◽  
Poly Ionic Liquid ◽  
The Impact

Schematic diagram of multi-walled carbon nanotube composite ionic liquid synergistically enhancing the high-speed impact resistance of polyurethane elastomer.

scholarly journals Impact Resistance of Epoxy Composites Reinforced with Amazon Guaruman Fiber: A Brief Report

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2264
Author(s):  
Raphael H. M. Reis ◽  
Fabio C. Garcia Filho ◽  
Larissa F. Nunes ◽  
Veronica S. Candido ◽  
Alisson C. R. Silva ◽  
...  
Keyword(s):  
Fiber Composite ◽  
Impact Resistance ◽  
Fiber Composites ◽  
Epoxy Composites ◽  
Impact Performance ◽  
Electron Microscopy Analysis ◽  
Ballistic Properties ◽  
Microscopy Analysis ◽  
Izod Impact ◽  
The Impact

Fibers extracted from Amazonian plants that have traditionally been used by local communities to produce simple items such as ropes, nets, and rugs, are now recognized as promising composite reinforcements. This is the case for guaruman (Ischinosiphon körn) fiber, which was recently found to present potential mechanical and ballistic properties as 30 vol% reinforcement of epoxy composites. To complement these properties, Izod impact tests are now communicated in this brief report for similar composites with up to 30 vol% of guaruman fibers. A substantial increase in impact resistance, with over than 20 times the absorbed energy for the 30 vol% guaruman fiber composite, was obtained in comparison to neat epoxy. These results were statistically validated by Weibull analysis, ANOVA, and Tukey’s test. Scanning electron microscopy analysis disclosed the mechanisms responsible for the impact performance of the guaruman fiber composites.

Experimental Calibration of ISV Damage Model Constants for Pure Copper for High-Speed Impact Simulation

2016 ◽  
Author(s):  
Yangqing Dou ◽  
Yucheng Liu ◽  
Wilburn Whittington ◽  
Jonathan Miller
Keyword(s):  
High Speed ◽  
Impact Analysis ◽  
Split Hopkinson Pressure Bar ◽  
Internal State ◽  
Pure Copper ◽  
Damage Model ◽  
Hopkinson Pressure Bar ◽  
Experimental Calibration ◽  
High Speed Impact ◽  
The Impact

Coefficients and constants of a microstructure-based internal state variable (ISV) plasticity damage model for pure copper have been calibrated and used for damage modeling and simulation. Experimental stress-strain curves obtained from Cu samples at different strain rate and temperature levels provide a benchmark for the calibration work. Instron quasi-static tester and split-Hopkinson pressure bar are used to obtain low-to-high strain rates. Calibration process and techniques are described in this paper. The calibrated material model is used for high-speed impact analysis to predict the impact properties of Cu. In the numerical impact scenario, a 100 mm by 100 mm Cu plate with a thickness of 10 mm will be penetrated by a 50 mm-long Ni rod with a diameter of 10mm. The thickness of 10 mm was selected for the Cu plate so that the Ni-Cu penetration through the thickness can be well observed through the simulations and the effects of the ductility of Cu on its plasticity deformation during the penetration can be displayed. Also, that thickness had been used by some researchers when investigating penetration mechanics of other materials. Therefore the penetration resistance of Cu can be compared to that of other metallic materials based on the simulation results obtained from this study. Through this study, the efficiency of this ISV model in simulating high-speed impact process is verified. Functions and roles of each of material constant in that model are also demonstrated.

High-speed impacts of slender bodies into non-smooth, complex fluids

2018 ◽  
Vol 861 ◽  
Author(s):  
Ishan Sharma
Keyword(s):  
Penetration Depth ◽  
High Speed ◽  
Complex Fluids ◽  
Laboratory Data ◽  
Impact Speed ◽  
High Speed Impact ◽  
Smooth Complex ◽  
Theoretical Predictions ◽  
Slender Bodies ◽  
The Impact

We present a simple hydrodynamical model for the high-speed impact of slender bodies into frictional geomaterials such as soils and clays. We model these materials as non-smooth, complex fluids. Our model predicts the evolution of the impactor’s speed and the final penetration depth given the initial impact speed, and the material and geometric parameters of the impactor and the impacted material. As an application, we investigate the impact of deep-penetrating anchors into seabeds. Our theoretical predictions are found to match field and laboratory data very well.

The High Velocity Impact Response of Novel Fiber Metal Laminates

2001 ◽  
Author(s):  
Wesley J. Cantwell ◽  
Graham Wade ◽  
J. Fernando Guillen ◽  
German Reyes-Villanueva ◽  
Norman Jones ◽  
...  
Keyword(s):  
High Velocity ◽  
Impact Resistance ◽  
High Velocity Impact ◽  
Fiber Metal Laminates ◽  
Velocity Impact ◽  
Glass Fiber Reinforced ◽  
Fiber Metal ◽  
Energy Absorbing ◽  
Dynamic Loading Conditions ◽  
The Impact

Abstract The impact resistance of a range of novel fiber metal laminates based on polypropylene, polyamide and polyetherimide matrices has been investigated. Initial attention focused on optimizing the interface between the composite and aluminum alloy constituents. Here, it was shown that composite-metal adhesion was excellent in all systems examined. In addition, tests at crosshead displacement rates up to 3 m/s indicated that the interfacial fracture energies remained high under dynamic loading conditions. High velocity impact tests on a series of 3/2 laminates (3 layers of aluminum/2 layers of composite) highlighted the outstanding impact resistance of a number of these systems. The glass fiber reinforced polypropylene system offered a particularly high impact resistance exhibiting a perforation energy of approximately 160 Joules. Here, failure mechanisms such as extensive plastic drawing in the aluminum layers and fiber fracture in the composite plies were found to contribute to the excellent energy-absorbing characteristics of these systems.

scholarly journals Effect of different helmet shell configurations on the protection against head trauma

2019 ◽  
Vol 54 (7-8) ◽  
pp. 408-415 ◽  
Author(s):  
Marta Palomar ◽  
Ricardo Belda ◽  
Eugenio Giner
Keyword(s):  
Head Trauma ◽  
High Speed ◽  
Composite Shell ◽  
Human Head ◽  
High Rate ◽  
Finite Element Models ◽  
High Speed Impact ◽  
Full Metal Jacket ◽  
The Impact ◽  
Single Combat

Head trauma following a ballistic impact in a helmeted head is assessed in this work by means of finite element models. Both the helmet and the head models employed were validated against experimental high-rate impact tests in a previous work. Four different composite ply configurations were tested on the helmet shell, and the energy absorption and the injury outcome resulting from a high-speed impact with full metal jacket bullets were computed. Results reveal that hybrid aramid–polyethylene configurations do not prevent bullet penetration at high velocities, while 16-layer aramid configurations are superior in dissipating the energy absorbed from the impact. The fabric orientation of these laminates proved to be determinant for the injury outcome, as maintaining the same orientations for all the layers led to basilar skull fractures (dangerous), while alternating orientation of the adjacent plies resulted in an undamaged skull. To the authors knowledge, no previous work in the literature has analysed numerically the influence of different stack configurations on a single combat helmet composite shell on human head trauma.

scholarly journals Experimental investigation of the impact response of novel steelbiocomposite hybrid materials

2018 ◽  
Vol 183 ◽  
pp. 02040
Author(s):  
KarthikRam Ramakrishnan ◽  
Mikko Hokka ◽  
Essi Sarlin ◽  
Mikko Kanerva ◽  
Reijo Kouhia ◽  
...  
Keyword(s):  
High Speed ◽  
Structural Integrity ◽  
Metal Layer ◽  
Rear Surface ◽  
Impact Resistance ◽  
Natural Fibre ◽  
Image Correlation ◽  
Impact Response ◽  
High Speed Camera ◽  
The Impact

Recent developments in the production of technical flax fabrics allow the use of sustainable natural fibres to replace synthetic fibres in the manufacture of structural composite parts. Natural fibre reinforced biocomposites have been proven to satisfy design and structural integrity requirements but impact strength has been identified as one of their limitations. In this paper, hybridisation of the biocomposite with a metal layer has been investigated as a potential method to improve the impact resistance of natural fibre composites. The impact response of biocomposites made of flax-epoxy is investigated experimentally using a high velocity particle impactor. A high-speed camera setup was used to observe the rear surface of the plates during impact. Digital Image Correlation (DIC) of the high speed camera images was used for full-field strain measurement and to study the initiation and propagation of damage during the impact. The different modes of damage in the hybrid laminate were identified by postimpact analysis of the section of the damaged composite plate using optical microscopy. The study shows the difference in impact response for different material combinations and configurations. The hybrid construction was shown to improve the impact resistance of the flax composite.

scholarly journals Effect of Mold Temperature on the Impact Behavior and Morphology of Injection Molded Foams Based on Polypropylene Polyethylene–Octene Copolymer Blends

Polymers ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 894 ◽  
Author(s):  
Santiago Muñoz-Pascual ◽  
Eduardo Lopez-Gonzalez ◽  
Cristina Saiz-Arroyo ◽  
Miguel Angel Rodriguez-Perez
Keyword(s):  
Impact Resistance ◽  
Mold Temperature ◽  
Impact Behavior ◽  
Critical Parameters ◽  
Crystalline Morphology ◽  
Copolymer Blends ◽  
Opposite Trend ◽  
Izod Impact ◽  
Injection Molded ◽  
The Impact

In this work, an isotactic polypropylene (PP) and a polyethylene–octene copolymer (POE) have been blended and injection-molded, obtaining solids and foamed samples with a relative density of 0.76. Different mold temperature and injection temperature were used. The Izod impact strength was measured. For solids, higher mold temperature increased the impact resistance, whereas in foams, the opposite trend was observed. In order to understand the reasons of this behavior, the morphology of the elastomeric phase, the crystalline morphology and the cellular structure have been studied. The presence of the elastomer near the skin in the case of high mold temperature can explain the improvement produced with a high mold temperature in solids. For foams, aspects as the elastomer coarsening in the core of the sample or the presence of a thicker solid skin are the critical parameters that justify the improved behavior of the materials produced with a lower mold temperature.

Evaluation of the Impact Formulae for Rigid Projectile Striking on Concrete Target

2011 ◽  
Vol 368-373 ◽  
pp. 894-900 ◽  
Author(s):  
Hao Wu ◽  
Qin Fang
Keyword(s):  
Penetration Depth ◽  
Empirical Formula ◽  
High Strength Concrete ◽  
High Speed ◽  
High Strength ◽  
Local Damage ◽  
High Speed Impact ◽  
Rigid Projectile ◽  
Semi Empirical ◽  
The Impact

Based on the large amounts of field impact tests with different projectile nosed shapes, the abilities of the existing classical empirical and semi-empirical impact formulae in predicting the local damage of normal and high strength concrete targets (NSCT & HSCT) under the strike of rigid projectile were evaluated. It finds that, firstly, for the penetration depth, the Forrestal and Chen & Li semi-empirical formulae, BRL and Whiffen empirical formulae are advised for the NSCT under the impact of ogive nosed projectile; and Chen & Li semi-empirical formula and ACE empirical formulae are advised for the NSCT under the impact of special nosed projectile; the dimensionless penetration depth of NSCT increases linearly with the non-dimensional impact factor. Secondly, for the penetration depth, Chen & Li semi-empirical formula is advised for the HSCT under the mid-to-high speed impact, and the existing formulae are not applicable while the speed of the projectile was relatively low. Thirdly, for the perforation mode of the target, the BRL and Chang empirical formulae are advised for the NSCT, and the Chen semi-empirical formula, ACE and BRL empirical formulae are advised for the HSCT.

Sign in / Sign up

Export Citation Format

Share Document