scholarly journals An Evaluation of How Students Use Blackboard and the Possible Link to Their Grades

SAGE Open ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 215824402110672
Author(s):  
Charles Darko

Blackboard is an important Learning Management System (LMS) employed at most higher education institutions to engage and interact with students during their studies. Students within Material Science and Engineering (MSE) often use these LMS’s to absorb mathematical derivations, scientific information and submit coursework tasks. In this work, statistical analysis of the average times the MSE students spent on Blackboard during their entire Bachelor’s program period were compared to their final examination grades. Results show a positive linear correlation between the time students spent on Blackboard and their final grades. Another interesting observation was the fact that the students engage and interact more with LMS at certain periods within the week rather than performing unintentional activities. Similar to the constructivism learning theory, the results gave evidence to the fact that the more students actively engage with the LMS’s, the more they construct knowledge for themselves.

2021 ◽  
Vol 17 (29) ◽  
pp. 38
Author(s):  
Charles Darko

Many complex formula derivation steps found within material science and engineering programmes are essential skill-developing activities that enhance students’ learning. However, most students lack the required mathematical knowledge to fully comprehend some of those derivation steps. This work developed a framework of clarifying some of the formula derivations steps by adding further mathematical steps that support the students’ constructive and cognitive learning. Some derivation steps were added to the derivations of the theoretical tensile strength model as well as the Maxwell’s and the Voigt-Kelvin models. The idea was not to disrupt students’ constructive or cognitive learning processes but to facilitate their learning since their ultimate aim is not to derive but to apply the steps of the modified derivations in solving other material science and engineering problems. The students benefited from the activities in two folds; firstly, they understood the reasons behind each derivation step and secondly, it improved their self-study activities by reducing their study periods. These activities provide a platform to widen STEM activities at higher education institutions. The ongoing work will look at other important formula derivation steps within material science and engineering that can enhance students’ learning.


Symmetry ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 541
Author(s):  
Giovanni Amelino-Camelia ◽  
Giacomo D’Amico ◽  
Fabrizio Fiore ◽  
Simonetta Puccetti ◽  
Michele Ronco

Some recent studies exposed preliminary but rather intriguing statistical evidence of in vacuo dispersion-like spectral lags for gamma-ray bursts (GRBs), a linear correlation between time of observation and energy of GRB particles, which is expected in some models of quantum geometry. Those results focused on testing in vacuo dispersion for the most energetic GRB particles, and in particular only included photons with energy at emission greater than 40 GeV. We here extend the window of the statistical analysis down to 5 GeV and find results that are consistent with what had been previously noticed at higher energies.


1989 ◽  
Vol 53 (370) ◽  
pp. 257-262 ◽  
Author(s):  
D. D. Hogarth ◽  
J. E. T. Horne

AbstractA thin (100 m) cover of flat-lying, Recent, calcite-rich tuff at Ndale near Fort Portal, Uganda, unconformably overlies steeply dipping Precambrian metamorphic rocks. It is locally radioactive owing to uranium-rich pyrochlore minerals and lesser amounts of zircon, monazite, titanite, and an unidentified thorium phosphate. In one concentrate, four grains of uranpyrochlore and one grain of uranoan pyrochlore showed a positive linear correlation of Ti with U, and negative linear correlations of Ti with Na, F and Sr. Ta remained high and relatively constant [11 anal., ave. 14.5 (0.6)% Ta2O5]. In the same concentrate the composition of a separate grain of uranoan pyrochlore did not plot on these lines and Ta was comparatively low [2 anal., ave. 4.5 (0.3)% Ta2O5]. The data suggest two separate paths of differentiation. However, zoned grains were not observed. Unit cells were cubic with a = 10.351 ± 0.002 Å for a grain with 12.9% UO2tot and 10.333 ± 0.002 Å for a grain with 26.6% UO2tot. On heating in air the cell size decreased, possibly due to oxidation of U4+. The crystalline nature of these minerals can be attributed to a very young (4000–5000 yr) geological age.


2017 ◽  
Vol 12 (7) ◽  
pp. 138
Author(s):  
Abdul Sattar H. Yousif ◽  
Firas Rifai ◽  
Hadeel Alhroot

This paper aims at investigating the relationship between the application of innovation and entrepreneurship system and the university competitive advantage in the Jordanian higher education sector.     To collect the required data, the number of some concerned individuals was surveyed through a carefully designed questionnaire that has become the main instrument to obtain the required data.A random sample of university managerial staff was withdrawn from five private Jordanian universities. The collected data was audited, reviewed and statically analyzed using the most relevant statistical test. The results of the statistical analysis have clearly pointed out that university adoption of innovation and entrepreneurship system has a significant effect on its competitive advantage.


2018 ◽  
Vol 10 (9) ◽  
pp. 3005
Author(s):  
Ling-feng Xie ◽  
Shu-liang Zou ◽  
Xiang-yang Li ◽  
Chang-shou Hong ◽  
Hong Wang ◽  
...  

Radon is internationally recognized as one of the seven seismic precursors. A self-assembly ultrasonic generator and experimental apparatus for radon measurement were utilized to explore the radon exhalation regularities of water-bearing porous media under different ultrasonic intensities. The experimental results showed that there was a coupling relationship among radon exhalation rate, moisture content, and ultrasonic frequency. With the increase of the frequency of the ultrasonic wave, its effect on the promotion of radon exhalation rate was found to be a more obviously positive linear correlation. The radon exhalation rate, which could climb to a maximum value of 0.179 Bq·m−2·s−1 in a naturally air-dried sample, increased at first and then decreased along with increased moisture content. Moreover, this study found that the ultrasonic wave had the most remarkable promoting effects on the radon exhalation rate of porous media with high moisture content, and there is a positive linear correlation between the growth rate of the radon exhalation rate and moisture content. The experimental results could provide a beneficial reference for the continual monitoring of radon in a seismically active belt and an explanation of radon anomalies; however, the proposed experimental model was simplified, so further insights are strictly required for a reliable correlation with the real monitoring of radon in a seismically active belt.


2017 ◽  
Vol 84 (11) ◽  
Author(s):  
Guoyong Mao ◽  
Lei Wu ◽  
Xueya Liang ◽  
Shaoxing Qu

Wrinkles widely existing in sheets and membranes have attracted a lot of attention in the fields of material science and engineering applications. In this paper, we present a new method to generate ordered (striplike) and steady wrinkles of a constrained dielectric elastomer (DE) sheet coated with soft electrodes on both sides subjected to high voltage. When the voltage reaches a certain value, wrinkles will nucleate and grow. We conduct both experimental and theoretical studies to investigate the wavelength and amplitude of the wrinkle. The results show a good agreement between theory and experiment. Moreover, the amplitude and wavelength of ordered wrinkles can be tuned by varying the prestretch and geometry of the DE sheet, as well as the applying voltage. This study can help future design of DE transducers such as diffraction grating and optical sensor.


Webology ◽  
2021 ◽  
Vol 18 (Special Issue 04) ◽  
pp. 303-318
Author(s):  
Dr. Sumaya Abbas Majeed Al-Rubaye

The study is based on the idea that for a good determination of the techniques adopted in pushing or withdrawing information and knowledge according to the requirements of the type of decisions and according to the appropriate time will lead to achieving a performance that exceeds the ministry's expectations and outside the familiar and the scheme and on that the researcher used the philosophical analysis and preparation of a questionnaire using the Likert pentagon scale and the adoption of descriptive and statistical analysis of the side results Practical, where I found a correlation and influence between the variables of the study, but it is relatively medium in most of its variables to show the ministry's need to support and enhance the capabilities necessary for workers to obtain knowledge at the specified time for the urgent need for them to accomplish the tasks entrusted to them.


Author(s):  
Nazim Hajiyev, Sardar Shabanov, Yadulla Hasanli

The article is dedicated to study of the impact of the quality of education on the economic growth in Azerbaijan. The quality index of education has been selected for two levels: a) up to higher education; b) higher school and post higher school. The indicator of average score (if available) that an applicant obtained in the current year on the country in student admission to the higher schools as a quality index of education in the country at the pre-higher education is offered as an alternative to the number of upper grades (10-12) in the secondary education. In the higher and post-higher education level, the number of articles printed on basic science and engineering per million people in Azerbaijan, and indexed on the Web of Science is taken as a quality index of education. Semi-linear type regression equations were made to assess the dependence of the indicators characterizing economic development.


2021 ◽  
Author(s):  
Pablo Mariz de Oliveira ◽  
Amanda do Nascimento Oliveira e Carneiro ◽  
Fábio Antônio Serra de Lima Júnior ◽  
Daniel Dantas da Silva ◽  
Leticia Leite Cavalcante ◽  
...  

Introduction: The sella turcica is a structure of the median region of the sphenoid bone. Variations in its morphology are relevant as it is a region subjected to several surgical procedures, mainly related to the pituitary gland. Objective: To analyze the morphology of the sella turcica and its sexual dimorphism in Northeastern Brazil. Methods: Fifteen human skulls from the Federal University of Paraíba (UFPB) were used. The qualitative analysis was performed by classifying the shape of the sella turcica into three types: U, J and flattened. Morphometric data was collected and statistically analyzed to evaluate the relationship between sella morphometry and gender, and between sella and skull measurements. Values of p< 0.05) in the sella turcica length (STL) and skull length (SL), with male skulls being larger in both cases. The other linear measurements didn’t show differences between the sexes (p>0.05). There was a positive linear correlation between STL and SL, and a negative linear correlation between sella turcica width (STW) and sella turcica height (STH) and between STH and bitemporal width (BTW). Conclusion: The results point to important differences in the morphometric parameters evaluated with original findings for this population. Knowledge of the morphology of the sella is essential to plan safer surgical approaches in the pituitary gland or related anatomical structures.


Sign in / Sign up

Export Citation Format

Share Document