scholarly journals SEM characterization and ageing analysis on two generation of invisible aligners

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Roberta Condò ◽  
Gianluca Mampieri ◽  
Aldo Giancotti ◽  
Loredana Cerroni ◽  
Guido Pasquantonio ◽  
...  
Keyword(s):  
Chemical Stability ◽  
In Vitro Study ◽  
Technological Evolution ◽  
Significant Weight Loss ◽  
Sem Images ◽  
Structural Alterations ◽  
Oral Environment ◽  
Before And After ◽  
Initial Hypothesis

Abstract Background The purpose of the in vitro study is to investigate and compare the morphological features and the chemical stability in weight of two different polyurethane-based blends, Smart Track (LD30) and Exceed30 (EX30), used for orthodontic aligners manufacture before and after the oral usage. Methods Twenty orthodontic aligners were randomly selected: 10 LD30 and 10 EX30, each group was divided in two subgroups, never used and intra-orally aged. By the employment of a Stereomicroscope, a section of 5 × 5 mm was cut from the buccal surface of the incisal region of each aligner. All samples were subjected to Scanning Electron Microscopy and Ageing tests in different solutions to simulate the hostility of the oral environment. The statistical method used was t-test. Results At SEM images, LD30 appears more homogeneous in texture respect to EX30. However, after clinical usage, both materials show significant structural alterations: findings have been supported by higher magnifications at SEM, by which it is clearly to observe many superficial cracks cross through the polymer structures of LD30U, absent in never used samples. LD30U surface becomes also smoother due to the disappearance of most of the conglomerates, but at the same time also rougher while EX30U shows a greater irregularity and porosity in which large and deep cracks are also highlighted. Although these changes occur persistently, in the aging tests no significant weight loss from both materials has been found, confirming the initial hypothesis of a good chemical stability and safety of both polyurethane mixtures even in conditions of severe hostility. Conclusion LD30 is the expression of the technological evolution of EX30, this is made evident above all by its morphological architecture, more homogeneous and defined but also by the chemical stability that can be appreciated even in evident critic situations.

scholarly journals Influence of the Arabic-Coffee on the Overall Color of Glazed or Polished Porcelain Veneers – In vitro Study

2019 ◽  
Vol 13 (1) ◽  
pp. 364-370 ◽  
Author(s):  
Nabiel Alghazali ◽  
Afaf A. Hakami ◽  
Ghadah A. AlAjlan ◽  
Rawan M. Alotaibi ◽  
Faris N. Alabdulwahab ◽  
...  
Keyword(s):  
Colour Change ◽  
In Vitro Study ◽  
Color Stability ◽  
Color Changes ◽  
Significant Difference ◽  
Oral Environment ◽  
Before And After ◽  
Feldspathic Porcelain

Background: Sometimes, porcelain restorations experience some degree of colour change in oral environment, which could be related to the quality of diet and surface roughness of these restorations. Objective: The aim of this in-vitro study was to evaluate the influence of Arabic-Coffee on the overall color of glazed or polished porcelain veneers fabricated from four different porcelain materials and two different thicknesses. Materials and Methods: A total of 160 porcelain disc of tested specimens were fabricated to a standardized thickness of 1.00 mm and 0.6mm using the following materials: Feldspathic porcelain, Zircon, E-max Press, and E-max CAD; (80 discs for each thickness and 20 specimens of each material used). Veneer specimens from each material were randomly divided into two subgroups (n = 10): 10 specimens were kept as glazed, were the other 10 tested specimens were adjusted with diamond burs, and then polished with Ivoclar Vivadent ceramic polishing kits using the recommended protocol for polishing provided by the company. A color of all tested specimens was measured using Vita Easy Shade Spectrophotometer. Then, all specimens were immersed in Arabic coffee (Al Mosafer Coffee, Saudi Arabia) and theromcycled for 1 week, and the colors of all tested specimens were then recorded again. Results: It was shown that there is a significant difference in the average color changes before and after immersing in Arabic-Coffee for all materials and thicknesses used in the current study. In-addition, significant differences in color changes were noticed between glazed and polished specimens. Moreover, colour change caused by the coffee was not significantly related to the thickness of the specimens used. Conclusion: Color stability of porcelain materials could be affected by surface treatment whether glazing or polishing. All aesthetic restorations should be deglazed whenever any adjustments have been done to maintain the color match and stability in an oral environment. Also, Arabic-Coffee is considered as a staining drink to a limited extend where patient should be assured to maintain their oral health to maintain the colour stability of their restorations.

An In Vitro Analysis of Sodium Hypochlorite Decontamination for the Reuse of Implant Healing Abutments

2020 ◽  
Author(s):  
Ahmad Almehmadi
Keyword(s):  
Sodium Hypochlorite ◽  
Bacterial Culture ◽  
Brain Heart Infusion ◽  
In Vitro Study ◽  
Vitro Study ◽  
Sem Images ◽  
Streptococcus Sanguis ◽  
Implant Dentistry ◽  
Vitro Analysis

Abstract The re-use of healing abutments (HAs) has become common practice in implant dentistry for economic concerns and the aim of this in-vitro study was to assess the effect of sodium hypochlorite (NaOCl) in decontamination of HAs. 122 HAs (Used and sterilized n=107; New n=15) were procured from 3 centers, of which 3 samples were discarded due to perforation in sterilization pouch.  For sterility assessment, the used HAs (n=80) were cultured in Brain Heart Infusion Broth (BHI) and Potato Dextrose Agar (PDA), bacterial isolates were identified in 7 samples. Also, 24 used HAs were stained with Phloxine B, photographed and compared to new HAs (n=5). Scanning electron microscope (SEM) assessed the differences between the two sets of HAs, following which the 7 contaminated HAs along with 24 used HAs from staining experiment (Total=31) were subsequently treated with sodium hypochlorite (NaOCl) and SEM images were observed. About 8.75% of HAs tested positive in bacterial culture; Streptococcus sanguis, Dermabacter hominis, Staphylococcus haemolyticus, and Aspergillus species were isolated. Phloxine B staining was positive for used and sterilized HAs when compared to controls. The SEM images revealed deposits in the used HAs and although treatment with NaOCl eliminated the contamination of cultured HAs, the SEM showed visible debris in the HA thread region. This in-vitro study concluded that SEM images showed debris in used HAs at screw-hole and thread regions even though they tested negative in bacterial culture. The treatment with NaOCl of used HAs showed no bacterial contamination but the debris was observed in SEM images. Future studies on the chemical composition, biological implications, and clinical influence is warranted before considering the reuse of HAs.

scholarly journals Scanning Accuracy of Bracket Features and Slot Base Angle in Different Bracket Materials by Four Intraoral Scanners: An In Vitro Study

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 365
Author(s):  
Seon-Hee Shin ◽  
Hyung-Seog Yu ◽  
Jung-Yul Cha ◽  
Jae-Sung Kwon ◽  
Chung-Ju Hwang
Keyword(s):  
Stainless Steel ◽  
In Vitro Study ◽  
Sem Images ◽  
Polycrystalline Alumina ◽  
Base Angle ◽  
Accurate Expression ◽  
Dental Model ◽  
Alumina Composite ◽  
The Difference

The accurate expression of bracket prescription is important for successful orthodontic treatment. The aim of this study was to evaluate the accuracy of digital scan images of brackets produced by four intraoral scanners (IOSs) when scanning the surface of the dental model attached with different bracket materials. Brackets made from stainless steel, polycrystalline alumina, composite, and composite/stainless steel slot were considered, which have been scanned from four different IOSs (Primescan, Trios, CS3600, and i500). SEM images were used as references. Each bracket axis was set in the reference scan image, and the axis was set identically by superimposing with the IOS image, and then only the brackets were divided and analyzed. One-way analysis of variance (ANOVA) was used to compare the differences. The difference between the manufacturer’s nominal torque and bracket slot base angle was 0.39 in SEM, 1.96 in Primescan, 2.04 in Trios, and 5.21 in CS3600 (p < 0.001). The parallelism, which is the difference between the upper and lower angles of the slot wall, was 0.48 in SEM, 7.00 in Primescan, 5.52 in Trios, 6.34 in CS3600, and 23.74 in i500 (p < 0.001). This study evaluated the accuracy of the bracket only, and it must be admitted that there is some error in recognizing slots through scanning in general.

scholarly journals Poly(δ-valerolactone)/Poly(ethylene-co-vinylalcohol)/β-Tricalcium Phosphate Composite as Scaffolds: Preparation, Properties, and In Vitro Amoxicillin Release

Polymers ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 46
Author(s):  
Mohammed Badwelan ◽  
Mohammed Alkindi ◽  
Osama Alghamdi ◽  
Waseem Sharaf Saeed ◽  
Abdel-Basit Al-Odayni ◽  
...  
Keyword(s):  
Hybrid Materials ◽  
Tricalcium Phosphate ◽  
Drug Carrier ◽  
Human Mesenchymal Stem Cells ◽  
In Vitro Study ◽  
Micro Computed Tomography ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
Poly Ethylene

Two poly(δ-valerolactone)/poly(ethylene-co-vinylalcohol)/β-tricalcium phosphate (PEVAL/PDVAL/β-TCP) composites containing an equal ratio of polymer and filled with 50 and 70 wt% of β-TCP microparticles were prepared by the solvent casting method. Interconnected pores were realized using the salt leached technique, and the porosity of the resulted composites was evaluated by the scanning electron microscopy (SEM) method. The homogeneity of the hybrid materials was investigated by differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analysis. The prepared materials’ SEM images showed interconnected micropores that respond to the conditions required to allow their uses as scaffolds. The porosity of each scaffold was determined from micro computed tomography (micro-CT) data, and the analysis of the mechanical properties of the prepared materials was studied through the stress-strain compressive test. The proliferation test results used human mesenchymal stem cells (MSCs) to grow and proliferate on the different types of prepared materials, reflecting that the hybrid materials were non-toxic and could be biologically acceptable scaffolds. The antibacterial activity test revealed that incorporation of amoxicillin in the specimens could inhibit the bacterial growth of S. aureus. The in vitro study of the release of amoxicillin from the PEVAL/PDVAL/amoxicillin and PEVAL/PDVAL/β-TCP/amoxicillin drug carrier systems in pH media 7.4, during eight days, gave promising results, and the antibiotic diffusion in these scaffolds obeys the Fickian model.

Histologic evidence that mast cells contribute to local tissue inflammation in peripheral spondyloarthritis by regulating interleukin-17A content

Rheumatology ◽  
2018 ◽  
Vol 58 (4) ◽  
pp. 617-627 ◽  
Author(s):  
Sijia Chen ◽  
Troy Noordenbos ◽  
Iris Blijdorp ◽  
Leonieke van Mens ◽  
Carmen A Ambarus ◽  
...  
Keyword(s):  
Mast Cells ◽  
Synovial Tissue ◽  
In Vitro Study ◽  
Allergic Diseases ◽  
Psoriatic Skin ◽  
Tissue Inflammation ◽  
Interleukin 17A ◽  
Before And After ◽  
Peripheral Spondyloarthritis

Abstract Objectives Synovial mast cells contain IL-17A, a key driver of tissue inflammation in SpA. A recent in vitro study showed that tissue-derived mast cells can capture and release exogenous IL-17A. The present study aimed to investigate if this mechanism could contribute to tissue inflammation in SpA. Methods Potential activation of mast cells by IL-17A was assessed by gene expression analysis of the Laboratory of Allergic Diseases 2 (LAD2) mast cell line. The presence of IL-17A-positive mast cells was assessed by immunohistochemistry in synovial tissue obtained before and after secukinumab treatment, as well as in skin and gut tissues from SpA-related conditions. Results IL-17A did not induce a pro-inflammatory response in human LAD2 mast cells according to the canonical IL-17A signalling pathway. In SpA synovial tissue, the percentage of IL-17A-positive mast cells increased upon treatment with secukinumab. IL-17A-positive mast cells were also readily detectable in non-inflamed barrier tissues such as skin and gut. In non-inflamed dermis and gut submucosa, IL-17A-positive mast cells are the most prevalent IL-17A-positive cells in situ. Compared with non-inflamed tissues, both total mast cells and IL-17A-positive mast cells were increased in psoriatic skin dermis and in submucosa from inflammatory bowel disease gut. In contrast, the proportion of IL-17A-positive mast cells was strikingly lower in the inflamed compared with non-inflamed gut lamina propria. Conclusion IL-17A-positive mast cells are present across SpA target tissues and correlate inversely with inflammation, indicating that their IL-17A content can be regulated. Tissue-resident mast cells may act as IL-17A-loaded sentinel cells, which release IL-17A to amplify tissue inflammation.

Comparison of bivalirudin, enoxaparin, and unfractionated heparin in preventing cardiac catheter thrombosis

2008 ◽  
Vol 100 (10) ◽  
pp. 693-698 ◽  
Author(s):  
Michael Buerke ◽  
Sebastian Schubert ◽  
Iris Reindl ◽  
Thomas Michel ◽  
Baerbel Hauroeder ◽  
...  
Keyword(s):  
Unfractionated Heparin ◽  
Continuous Infusion ◽  
Treatment Strategies ◽  
In Vitro Study ◽  
Coronary Intervention ◽  
Thrombin Inhibitor ◽  
P Value ◽  
Cardiac Catheter ◽  
Before And After

SummaryBivalirudin, a direct thrombin inhibitor binds specifically and reversibly to both fibrin-bound and unbound thrombin. Bivalirudin is approved for use as an anticoagulant in patients undergoing percutaneous coronary intervention. The OASIS-5 trial presented a significant increase in cardiac catheter thrombosis for the pentasaccharid fondaparinux compared to enoxaparin. Catheter thrombosis has never been reported in any trial using bivalirudin. Our study compared the development of catheter thrombosis for bivalirudin, enoxaparin, and unfractionated heparin in a controlled in-vitro environment. Ten healthy male volunteers were pretreated with aspirin 500 mg 2 hours before venesection of 50 ml of blood. The seven groups of anticoagulant combinations tested were:UFH, UFH + eptifibatide, enoxaparin, enoxaparin + eptifibatide, bivalirudin bolus, bivalirudin + eptifibatide, bivalirudin bolus + continuous infusion. The blood/anticoagulant mix continuously circulated through a cardiac guiding catheter for 60 minutes or until the catheter became blocked with thrombus. Thrombus development was assessed by weighing each catheter before and after the procedure. Electron microscopy was used to quantify the degree of erythrocyte, platelet and fibrin deposition. Following anticoagulation with bolus dose bivalirudin, the catheter was invariably occluded with thrombus after 33 minutes of circulation. However, a continuous infusion of Bivalirudin prevented the development of occlusive catheter thrombosis. In the bolus bivalirudin group the mean thrombus weight was significantly greater than in all other groups (p-value < 0.01 in all analyses). Bivalirudin given as a bolus was not sufficient to prevent cardiac catheter thrombosis in our in-vitro study. However, a continuous infusion of bivalirudin had similar anti-thrombotic efficacy compared to other treatment strategies.

scholarly journals Comparison of the Remineralizing Effect of Brushing with Aloe vera versus Fluoride Toothpaste

2020 ◽  
Author(s):  
Teresa Al Haddad ◽  
Elie Khoury ◽  
Nada Farhat Mchayleh
Keyword(s):  
Repeated Measures ◽  
Aloe Vera ◽  
In Vitro Study ◽  
P Value ◽  
Fluoride Toothpaste ◽  
Before And After ◽  
The Difference ◽  
Group B ◽  
Ca:P Ratio

Abstract Objectives The aim of the present in vitro study is to compare the remineralization brushing effect of three toothpastes and Aloe vera (AV) gel. Materials and Methods Forty sound extracted teeth were placed in a demineralizing solution for 4 days and randomly assigned to four groups: group A: 1,450-ppm fluoride toothpaste; group B: AV nonfluoridated toothpaste; group C: AV 1,000-ppm fluoridated toothpaste; and group D: AV gel. A 3-minute pH cycling was performed twice a day for each group for 12 days. Specimens were analyzed before and after by scanning electron microscope—energy dispersive X-ray. Statistical analysis The outcomes were analyzed by Kolmogorov–Smirnov’s tests, repeated-measures analyses of variance followed by univariate analyses, and Bonferroni’s multiple comparisons tests to compare the calcium-to-phosphorus (Ca:P) ratio within time among toothpaste groups. Results Following remineralization, the Ca:P ratio increased in all groups. The difference of the Ca:P ratio was not significant between groups C, D, and A. The mean ratio was significantly lower in group B (p-value = 0.026). Conclusions The AV gel demonstrated a remineralization capacity equal to that of the 1,450-ppm fluoride toothpaste. In contrast, fluoride-free AV toothpaste showed a lower remineralization efficiency. Further studies are required to understand its mechanism.

scholarly journals Biochemical Interactions Between Polymeric Resins Used for Occlusal Splints and Saliva A pilot study comparing the CAD/CAM technology and the conventional approach

2019 ◽  
Vol 56 (2) ◽  
pp. 409-412 ◽  
Author(s):  
Marina Melescanu-Imre ◽  
Mihaela Pantea ◽  
Alexandra Totan ◽  
Ana Maria Cristina Tancu ◽  
Maria Greabu ◽  
...  
Keyword(s):  
Oxidative Stress ◽  
Uric Acid ◽  
In Vitro Study ◽  
Acrylic Resin ◽  
Occlusal Splints ◽  
Oral Environment ◽  
Cad Cam ◽  
3D Printed ◽  
Polymeric Resins

The CAD/CAM technology has been successfully integrated in clinical and laboratory aspects of dental medicine. The present in vitro study focuses on the biochemical interactions between saliva and three types of polymeric resins for occlusal splints. Dental material samples were produced from 3D printed, milled and self-cured resins and were incubated with saliva samples from 20 healthy volunteers. The results showed that the 3D printed and milled polymeric resins did not produce any significant changes in oxidative stress parameters (uric acid, TAC, GGT, OXSR-1) or inflammatory markers (IL-2, IL-6). On the other hand, the self-cured acrylic resin produced a significant decrease in the salivary TAC and uric acid, the most important antioxidants in saliva, affecting the capacity of saliva to protect the oral environment against oxidative stress.

scholarly journals Evaluation of Surface Change and Roughness in Implants Lost Due to Peri-Implantitis Using Erbium Laser and Various Methods: An In Vitro Study

Nanomaterials ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2602
Author(s):  
Aslihan Secgin-Atar ◽  
Gokce Aykol-Sahin ◽  
Necla Asli Kocak-Oztug ◽  
Funda Yalcin ◽  
Aslan Gokbuget ◽  
...  
Keyword(s):  
Pulse Laser ◽  
Short Pulse ◽  
In Vitro Study ◽  
Titanium Implant ◽  
Implant Surface ◽  
Sem Images ◽  
Short Pulse Laser ◽  
Laser Group ◽  
Long Pulse

The aim of our study was to obtain similar surface properties and elemental composition to virgin implants after debridement of contaminated titanium implant surfaces covered with debris. Erbium-doped:yttrium, aluminum, and garnet (Er:YAG) laser, erbium, chromium-doped:yttrium, scandium, gallium, and garnet (Er,Cr:YSGG) laser, curette, and ultrasonic device were applied to contaminated implant surfaces. Scanning electron microscopy (SEM) images were taken, the elemental profile of the surfaces was evaluated with energy dispersive X-ray spectroscopy (EDX), and the surface roughness was analyzed with profilometry. Twenty-eight failed implants and two virgin implants as control were included in the study. The groups were designed accordingly; titanium curette group, ultrasonic scaler with polyetheretherketone (PEEK) tip, Er: YAG very short pulse laser group (100 μs, 120 mJ/pulse 10 Hz), Er: YAG short-pulse laser group (300 μs, 120 mJ/pulse, 10 Hz), Er: YAG long-pulse laser group (600 μs, 120 mJ/pulse, 10 Hz), Er, Cr: YSGG1 laser group (1 W 10 Hz), Er, Cr: YSGG2 laser group (1.5 W, 30 Hz). In each group, four failed implants were debrided for 120 s. When SEM images and EDX findings and profilometry results were evaluated together, Er: YAG long pulse and ultrasonic groups were found to be the most effective for debridement. Furthermore, the two interventions have shown the closest topography of the sandblasted, large grit, acid-etched implant surface (SLA) as seen on virgin implants.

Sign in / Sign up

Export Citation Format

Share Document