scholarly journals Properties of biomass powders resulting from the fine comminution of lignocellulosic feedstocks by three types of ball-mill set-up

2021 ◽  
Vol 1 ◽  
pp. 125
Author(s):  
Rova Karine Rajaonarivony ◽  
Xavier Rouau ◽  
Charlène Fabre ◽  
Claire Mayer-Laigle

Background: Lignocellulosic biomass has many functionalities that hold huge potential for material, energy or chemistry applications. To support advanced applications, the biomass must be milled into ultrafine powder to increase reactivity. This milling unit operation needs to be fully mastered to deliver high-quality standard end-products. Here we studied the relationship between the characteristics of the starting lignocellulosic plant material and the properties of the resulting ultrafine powder in different ball-mill process routes. Methods: Two lignocellulosic biomasses (pine bark and wheat straw) with contrasted compositional and mechanical properties were milled using three ball-mill set-ups delivering different balances of impact force and attrition force. The resulting powders were analysed for particle characteristics (size, agglomeration extent, shape) and powder flow properties (compressibility, cohesion) using a dynamic powder rheometer. Results: Pine bark is more amenable to a fast particle size reduction than the fibrous wheat straw. The resulting pine bark powders appear less compressible but much more cohesive than the straw powders due to particle shape, density and composition factors. The mill set-up working by attrition as dominant mechanical force (vibratory ball mill) produced a mix of large, elongated particles and higher amounts of fines as it acts mainly by erosion, the resulting powder being more prone to agglomerate due to the abundance of fines. The mill set-up working by impact as dominant mechanical force (rotary ball mill) produced more evenly distributed particle sizes and shapes. The resulting powder is less prone to agglomerate due to a preferential fragmentation mechanism. Conclusions: The attrition-dominant mill yields powders with dispersed particle sizes and shapes and the poorest flow properties, while the impact-dominant mill yields more agglomeration-prone powders. The mill set-up working with impact and attrition as concomitant mechanical forces (stirred ball mill) produces powders with better reactivity and flow properties compared to rotary and vibratory mills.

HortScience ◽  
2006 ◽  
Vol 41 (4) ◽  
pp. 1019B-1019
Author(s):  
Jennifer Green ◽  
Derald A. Harp ◽  
Kevin L. Ong

Phytophthora diseases are economically important, requiring the use of chemical fungicides and, more recently, biological controls. Recent research suggests that composted bark products may lessen the impact of the disease, even in the absence of these chemicals. An experiment was conducted to compare chemical and biological fungicides to untreated pine bark compost. Impatiens wallerana plugs were transplanted from 288 trays into 1801 trays. All plants were planted into Berger BM-7, 35% composted bark mix (Berger Horticulture, Quebec, Canada). Media was prepared by premixing one of the five following fungicide treatments: 1) Control, 2) Banrot at 0.6 g/L, 3) Root Shield at 1.6 g/L, 4) Actino-Fe at 5.1 g/Ll, or 5) SoilGard at 1.6 g/L. Plants received no fertilizer. Three strains of Phytophthora were grown in 25 °C on clarified V8 media. Pathogenic inoculum was made by macerating the growth media and fungi in 100 ml H2O. Mixture was pulse-blended for 1 min, and an additional 200 mL dH2O was added. Inoculation was 5 ml per plant. Flats were kept on a misting bench, and misted twice daily for 15 min. The experiment was set up using a RBD repeated six times with three plants per rep. Plants were rated weekly for 5 weeks using a damage scale of 0 to 5, with 0 indicating no sign of disease and 5 being dead. Statistical analysis was conducted using a Chi-Square. Disease incidence between the biological, chemical, and composted bark treatments did not differ, with all treatments providing complete control. At least in this study, the use of composted pine bark media provided Phytophthora control equivalent to current chemical and biological fungicides.


2018 ◽  
Vol 1 (1) ◽  
pp. 1
Author(s):  
Murisal Murisal

Motif and Impact of Early Marriage in Indarung Ngalau Batu Gadang.Penelitian is motivated by teenagers who married early on. Today, young men and women have a tendency to be less prepared to enter the home life, they are only ready to marry (ready here can be interpreted, maturity in terms of financial, understand what the meaning of marriage according to marriage law) is the bond of inner birth between a man and a woman as husband and wife for the purpose of forming a happy and eternal family (household) based on the Supreme Godhead while they are not ready to set up a home, whereas to build a household requires preparation both physically and spiritually . The purpose of this study to determine the motives underlying adolescents to make early marriage and the impact caused in the household as a result of the marriage.


Author(s):  
Mark Burden

Much eighteenth-century Dissenting educational activity was built on an older tradition of Puritan endeavour. In the middle of the seventeenth century, the godly had seen education as an important tool in spreading their ideas but, in the aftermath of the Restoration, had found themselves increasingly excluded from universities and schools. Consequently, Dissenters began to develop their own higher educational institutions (in the shape of Dissenting academies) and also began to set up their own schools. While the enforcement of some of the legal restrictions that made it difficult for Dissenting institutions diminished across the eighteenth century, the restrictions did not disappear entirely. While there has been considerable focus on Dissenting academies and their contribution to debates about doctrinal orthodoxy, the impact of Dissenting schools was also considerable.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
E. S. Prasedya ◽  
A. Frediansyah ◽  
N. W. R. Martyasari ◽  
B. K. Ilhami ◽  
A. S. Abidin ◽  
...  

AbstractSample particle size is an important parameter in the solid–liquid extraction system of natural products for obtaining their bioactive compounds. This study evaluates the effect of sample particle size on the phytochemical composition and antioxidant activity of brown macroalgae Sargassum cristaefolium. The crude ethanol extract was extracted from dried powders of S.cristeafolium with various particle sizes (> 4000 µm, > 250 µm, > 125 µm, > 45 µm, and < 45 µm). The ethanolic extracts of S.cristaefolium were analysed for Total Phenolic Content (TPC), Total Flavonoid Content (TFC), phenolic compound concentration and antioxidant activities. The extract yield and phytochemical composition were more abundant in smaller particle sizes. Furthermore, the TPC (14.19 ± 2.08 mg GAE/g extract to 43.27 ± 2.56 mg GAE/g extract) and TFC (9.6 ± 1.8 mg QE/g extract to 70.27 ± 3.59 mg QE/g extract) values also significantly increased as particle sizes decreased. In addition, phenolic compounds epicatechin (EC), epicatechin gallate (ECG), epigallocatechin (EGC), and Epigallocatechin gallate (EGCG) concentration were frequently increased in samples of smaller particle sizes based on two-way ANOVA and Tukey’s multiple comparison analysis. These results correlate with the significantly stronger antioxidant activity in samples with smaller particle sizes. The smallest particle size (< 45 µm) demonstrated the strongest antioxidant activity based on DPPH, ABTS, hydroxyl assay and FRAP. In addition, ramp function graph evaluates the desired particle size for maximum phytochemical composition and antioxidant activity is 44 µm. In conclusion, current results show the importance of particle size reduction of macroalgae samples to increase the effectivity of its biological activity.


The theory of the vibrations of the pianoforte string put forward by Kaufmann in a well-known paper has figured prominently in recent discussions on the acoustics of this instrument. It proceeds on lines radically different from those adopted by Helmholtz in his classical treatment of the subject. While recognising that the elasticity of the pianoforte hammer is not a negligible factor, Kaufmann set out to simplify the mathematical analysis by ignoring its effect altogether, and treating the hammer as a particle possessing only inertia without spring. The motion of the string following the impact of the hammer is found from the initial conditions and from the functional solutions of the equation of wave-propagation on the string. On this basis he gave a rigorous treatment of two cases: (1) a particle impinging on a stretched string of infinite length, and (2) a particle impinging on the centre of a finite string, neither of which cases is of much interest from an acoustical point of view. The case of practical importance treated by him is that in which a particle impinges on the string near one end. For this case, he gave only an approximate theory from which the duration of contact, the motion of the point struck, and the form of the vibration-curves for various points of the string could be found. There can be no doubt of the importance of Kaufmann’s work, and it naturally becomes necessary to extend and revise his theory in various directions. In several respects, the theory awaits fuller development, especially as regards the harmonic analysis of the modes of vibration set up by impact, and the detailed discussion of the influence of the elasticity of the hammer and of varying velocities of impact. Apart from these points, the question arises whether the approximate method used by Kaufmann is sufficiently accurate for practical purposes, and whether it may be regarded as applicable when, as in the pianoforte, the point struck is distant one-eighth or one-ninth of the length of the string from one end. Kaufmann’s treatment is practically based on the assumption that the part of the string between the end and the point struck remains straight as long as the hammer and string remain in contact. Primâ facie , it is clear that this assumption would introduce error when the part of the string under reference is an appreciable fraction of the whole. For the effect of the impact would obviously be to excite the vibrations of this portion of the string, which continue so long as the hammer is in contact, and would also influence the mode of vibration of the string as a whole when the hammer loses contact. A mathematical theory which is not subject to this error, and which is applicable for any position of the striking point, thus seems called for.


2021 ◽  
Vol 13 (12) ◽  
pp. 6875
Author(s):  
Irene Poza-Casado ◽  
Raquel Gil-Valverde ◽  
Alberto Meiss ◽  
Miguel Ángel Padilla-Marcos

Indoor air quality (IAQ) in educational buildings is a key element of the students’ well-being and academic performance. Window-opening behavior and air infiltration, generally used as the sole ventilation sources in existing educational buildings, often lead to unhealthy levels of indoor pollutants and energy waste. This paper evaluates the conditions of natural ventilation in classrooms in order to study how climate conditions affect energy waste. For that purpose, the impact of the air infiltration both on the IAQ and on the efficiency of the ventilation was evaluated in two university classrooms with natural ventilation in the Continental area of Spain. The research methodology was based on site sensors to analyze IAQ parameters such as CO2, Total Volatile Organic Compounds (TVOC), Particulate Matter (PM), and other climate parameters for a week during the cold season. Airtightness was then assessed within the classrooms and the close built environment by means of pressurization tests, and infiltration rates were estimated. The obtained results were used to set up a Computational Fluid Dynamics (CFD) model to evaluate the age of the local air and the ventilation efficiency value. The results revealed that ventilation cannot rely only on air infiltration, and, therefore, specific controlled ventilation strategies should be implemented to improve IAQ and to avoid excessive energy loss.


2021 ◽  
pp. 112067212110307
Author(s):  
Julia Sieberer ◽  
Patrick Hughes ◽  
Indy Sian

Objectives: The coronavirus pandemic has forced healthcare staff across all medical specialties to adapt new and different ways of working. A new approach has been set up in the Acute Referral Clinic (ARC) at Musgrove Park Hospital and a survey has been conducted to measure the impact of the new method on patient and healthcare professionals’ satisfaction with the new service. Methods: A telephone-based consultation was introduced in ARC at Musgrove Park Hospital in March 2020 and patients were instructed to fill out a questionnaire containing eight items using a Likert Scale 1 (‘very poor/disagree’) to 4 (‘very good/strongly agree’) plus two boxes for open positive and negative comments respectively. Likewise a questionnaire was designed in order to assess the healthcare professionals’ satisfaction using the new approach. Data collection took place over a two month period between the end of March 2020 and end of May 2020. The data underwent quality control and was analysed using descriptive statistics. Results: Patient responses illustrated high satisfaction scores with an overall rating of very good (89.4%). The healthcare professionals’ rating of the service was good (28.6% – ‘very good/strongly agree’, 57.1% – ‘good/agree’). The safety rating of the new approach was overall rated ‘very good’ with 90.4% and 71.4% of patients and healthcare professionals respectively. Conclusions: The telephone consultations introduced in the wake of COVID-19 are well accepted by both patients and doctors. There are some limitations of the approach, foremost being consultation time and clinic space but these do not outweigh the general benefit of this format amidst a pandemic setting.


Author(s):  
Ana Guerberof Arenas ◽  
Joss Moorkens ◽  
Sharon O’Brien

AbstractThis paper presents results of the effect of different translation modalities on users when working with the Microsoft Word user interface. An experimental study was set up with 84 Japanese, German, Spanish, and English native speakers working with Microsoft Word in three modalities: the published translated version, a machine translated (MT) version (with unedited MT strings incorporated into the MS Word interface) and the published English version. An eye-tracker measured the cognitive load and usability according to the ISO/TR 16982 guidelines: i.e., effectiveness, efficiency, and satisfaction followed by retrospective think-aloud protocol. The results show that the users’ effectiveness (number of tasks completed) does not significantly differ due to the translation modality. However, their efficiency (time for task completion) and self-reported satisfaction are significantly higher when working with the released product as opposed to the unedited MT version, especially when participants are less experienced. The eye-tracking results show that users experience a higher cognitive load when working with MT and with the human-translated versions as opposed to the English original. The results suggest that language and translation modality play a significant role in the usability of software products whether users complete the given tasks or not and even if they are unaware that MT was used to translate the interface.


2021 ◽  
pp. 1-11
Author(s):  
Yipu Mao ◽  
Muliang Jiang ◽  
Fanyu Zhao ◽  
Liling Long

Currently, DSC has been extensively studied in the diagnosis, differential diagnosis and prognosis evaluation of brain lymphoma, but it has not obtained a uniform standard. By combining DSC imaging features, this study investigated the imaging features and diagnostic value of several types of tumors such as primary brain lymphoma. At the same time, this study obtained data from brain lymphoma patients by data collection and set up different groups to conduct experimental studies to explore the correlation between IVIM-MRI perfusion parameters and DSC perfusion parameters in brain lymphoma. Through experimental research, it can be seen that the combination of two perfusion imaging techniques can more fully reflect the blood flow properties of the lesion, which is beneficial to determine the nature of the lesion.


Water Policy ◽  
2013 ◽  
Vol 15 (S1) ◽  
pp. 9-25 ◽  
Author(s):  
Bharat R. Sharma ◽  
Devaraj de Condappa

The topography of the Ganges basin is highly variable, with the steep mountainous region of the Himalaya upstream and the large fertile plains in eastern India and Bangladesh downstream. The contribution from the glaciers to streamflows is supposed to be significant but there is uncertainty surrounding the impact of climate change on glaciers. An application of the Water Evaluation and Planning model was set up which contained an experimental glaciers module. The model also examined the possible impacts of an increase in temperature. The contribution from glaciated areas is significant (60–75%) in the Upper Ganges but reduces downstream, falling to about 19% at Farakka. Climate change-induced rise in temperature logically increases the quantity of snow and ice that melts in glaciated areas. However, this impact decreases from upstream (+8% to +26% at Tehri dam) to downstream (+1% to +4% at Farakka). Such increases in streamflows may create flood events more frequently, or of higher magnitude, in the upper reaches. Potential strategies to exploit this additional water may include the construction of new dams/reservoir storage and the development of groundwater in the basin through managed aquifer recharge. The riparian states of India, Nepal and Bangladesh could harness this opportunity to alleviate physical water scarcity and improve productivity.


Sign in / Sign up

Export Citation Format

Share Document