scholarly journals Different Textile Materials as Light Shaping Attachments in Studio Photography and Their Influence on Colour Reproduction

Tekstilec ◽  
2021 ◽  
Vol 64 (1) ◽  
pp. 4-15
Author(s):  
Veronika Štampfl ◽  
◽  
Klemen Možina ◽  
Jure Ahtik ◽  
◽  
...  
Keyword(s):  
Controlled Environment ◽  
Light Sources ◽  
Diffuse Light ◽  
High Quality ◽  
Textile Materials ◽  
Different Types

The research focuses on the quality of colour reproduction when using different light sources, often used to illuminate scenes in a photo studio, and different types of fabrics as lighting shapers. With the latter, the light can be converted into softer and more diffuse light, but the properties of the fabrics used affect the colour impression and thus the quality of the reproduced colours. This was evaluated by analysing the colour differ¬ences which were calculated from the colorimetric values of the colour patches of the X-Rite ColorChecker Passport test chart. Test chart was photographed in a controlled environment and illuminated with different combinations of light sources and tested fabrics. The results confirmed that not all combinations of variables are suitable for use if the goal of the photograph is to achieve high quality colour reproduction.

scholarly journals Commercial Greenhouse Growers Can Produce High-quality Bedding Plants in Bioplastic-based Biocontainers

2017 ◽  
Vol 27 (4) ◽  
pp. 472-481 ◽  
Author(s):  
Nicholas J. Flax ◽  
Christopher J. Currey ◽  
James A. Schrader ◽  
David Grewell ◽  
William R. Graves
Keyword(s):  
Production Systems ◽  
Growth Index ◽  
Dry Weight ◽  
High Quality ◽  
Bedding Plants ◽  
Shoot Dry Weight ◽  
Different Types ◽  
Greenhouse Growers ◽  
Container Type

Our objectives were to quantify the growth and quality of herbaceous annuals grown in different types of bioplastic-based biocontainers in commercial greenhouses and quantify producer interest in using these types of biocontainers in their production systems. Seedlings of ‘Serena White’ angelonia (Angelonia angustifolia) and ‘Maverick Red’ zonal geranium (Pelargonium ×hortorum) that had been transplanted into nine different (4.5-inch diameter) container types [eight bioplastic-based biocontainers and a petroleum-based plastic (PP) (control)] were grown at six commercial greenhouses in the upper midwestern United States. Plants were grown alongside other bedding annuals in each commercial greenhouse, and producers employed their standard crop culture practices. Data were collected to characterize growth when most plants were flowering. Questionnaires to quantify producer perceptions and interest in using bioplastic-based biocontainers, interest in different container attributes, and satisfaction were administered at select times during the experiment. Container type interacted with greenhouse to affect angelonia growth index (GI) and shoot dry weight (SDW), as well as shoot, root, and container ratings. Container type or greenhouse affected geranium GI and shoot rating, and their interaction affected SDW, and root and container ratings. These results indicate that commercial producers can grow herbaceous annuals in a range of bioplastic-based biocontainers with few or no changes to their crop culture practices.

scholarly journals ANALYSIS AND ENHANCEMENT OF THE DENOISING DEPTH DATA USING KINECT THROUGH ITERATIVE TECHNIQUE

2016 ◽  
Vol 78 (9) ◽  
Author(s):  
Mostafa Karbasi ◽  
Sara Bilal ◽  
Reza Aghababaeyan ◽  
Abdolvahab Ehsani Rad ◽  
Zeeshan Bhatti ◽  
...  
Keyword(s):  
Background Noise ◽  
Depth Map ◽  
Depth Image ◽  
Shadow Removal ◽  
3D Image ◽  
High Quality ◽  
Depth Data ◽  
Different Types ◽  
Accuracy And Stability

Since the release of Kinect by Microsoft, the, accuracy and stability of Kinect data-such as depth map, has been essential and important element of research and data analysis. In order to develop efficient means of analyzing and using the kinnect data, researchers require high quality of depth data during the preprocessing step, which is very crucial for accurate results. One of the most important concerns of researchers is to eliminate image noise and convert image and video to the best quality. In this paper, different types of the noise for Kinect are analyzed and a unique technique is used, to reduce the background noise based on distance between Kinect devise and the user. Whereas, for shadow removal, the iterative method is used to eliminate the shadow casted by the Kinect. A 3D depth image is obtained as a result with good quality and accuracy. Further, the results of this present study reveal that the image background is eliminated completely and the 3D image quality in depth map has been enhanced.

Methods for Assessing Quantity and Quality of Illumination

2019 ◽  
Vol 5 (1) ◽  
pp. 479-502 ◽  
Author(s):  
Aurelien David ◽  
Kevin A.G. Smet ◽  
Lorne Whitehead
Keyword(s):  
Solid State ◽  
Electrical Power ◽  
Power Production ◽  
Human Vision ◽  
Light Sources ◽  
Good Reproducibility ◽  
Light Emitters ◽  
High Quality ◽  
Lighting Conditions

Human vision provides useful information about the shape and color of the objects around us. It works well in many, but not all, lighting conditions. Since the advent of human-made light sources, it has been important to understand how illumination affects vision quality, but this has been surprisingly difficult. The widespread introduction of solid-state light emitters has increased the urgency of this problem. Experts still debate how lighting can best enable high-quality vision—a key issue since about one-fifth of global electrical power production is used to make light. Photometry, the measurement of the visual quantity of light, is well established, yet significant uncertainties remain. Colorimetry, the measurement of color, has achieved good reproducibility, but researchers still struggle to understand how illumination can best enable high-quality color vision. Fortunately, in recent years, considerable progress has been made. Here, we summarize the current understanding and discuss key areas for future study.

scholarly journals CONCEPT AND REALIZATION OF BACKPACK-TYPE SYSTEM FOR MULTICHANNEL ELECTROPHYSIOLOGY IN FREELY BEHAVING RODENTS

2019 ◽  
Vol 9 (4) ◽  
pp. 64-68
Author(s):  
Olga Chaikovska ◽  
Oleksandr Ponomarenko ◽  
Olexandr Dovgan ◽  
Igor Rokunets ◽  
Sergii Pavlov ◽  
...  
Keyword(s):  
Type System ◽  
Field Potential ◽  
High Quality ◽  
Flexible System ◽  
Different Types ◽  
Freely Behaving ◽  
Rats And Mice ◽  
Local Field Potential Lfp ◽  
Anaesthetized Rat

Technologies for multichannel electrophysiology are experiencing astounding growth. Numbers of channels reach thousands of recording sites, systems are often combined with electrostimulations and optic stimulations. However, the task of design the cheap, flexible system for freely behaving animals without tethered cable are not solved completely. We propose the system for multichannel electrophysiology for both rats and mice. The system allows to record unit activity and local field potential (LFP) up to 32 channels with different types of electrodes. The system was constructed using Intan technologies RHD 2132 chip. Data acquisition and recordings take place on the DAQ-card, which is placed as a back-pack on the animal. The signal is amplified with amplifier cascade and digitalized with 16-bit ADC. Instrumental filters allow to filter the signal in 0.1–20000 Hz bandwidth. The system is powered from the mini-battery with capacity 340 mA/hr. The system was validated with generated signals, in anaesthetized rat and showed a high quality of recordings.

scholarly journals The necessity of using high quality orthoses in rehabilitation medicine

2018 ◽  
Vol 178 ◽  
pp. 05009
Author(s):  
Elena Amaricai
Keyword(s):  
Rheumatoid Arthritis ◽  
Rehabilitation Medicine ◽  
Good Stability ◽  
High Quality ◽  
Proper Selection ◽  
Different Types ◽  
The Right ◽  
Over Time ◽  
Selection Of

In rehabilitation medicine there is increasing need of using high quality orthoses that can provide either good stability of the joint or good correction of the postural defect. The advantages of using orthoses that are in the same time hypoallergenic, lightweight, flexible, resistant and durable over time should be considered when prescribing them in clinical practice. This study presents different types of orthoses and the necessity of proper selection of materials when choosing the best ones. We included 34 patients diagnosed with different musculoskeletal conditions (thoracic and thoraco-lumbar scoliosis, genu valgum deviation and rheumatoid arthritis) that required the use of special orthoses (thoraco-lumbar braces, knee or hand orthoses). Patients were asked to complete a questionnaire regarding the quality of the orthoses that they have been used. The following characteristics of an orthosis should be considered when choosing the right one: easily wearable, comfortable, offering good stability of a joint, high quality, lightweight, hypoallergenic and resistant.

Formation of Fire Retardant Properties in Elastic Silica Coatings for Textile Materials

2020 ◽  
Vol 1006 ◽  
pp. 25-31
Author(s):  
Olga Skorodumova ◽  
Olena Tarakhno ◽  
Olena Chebotaryova ◽  
Yuliana Hapon ◽  
Fatih Mehmet Emen
Keyword(s):  
Phase Composition ◽  
Ir Spectroscopy ◽  
Fire Retardant ◽  
Express Method ◽  
High Quality ◽  
Textile Materials ◽  
Silica Coatings ◽  
Fire Retardant Properties ◽  
Hydrolysis Of

The influence of the degree of homogeneity of the SiO2 sol on the duration of the induction period and the quality of fire-resistant coatings on textile materials was studied. The prospects of using IR spectroscopy as an express method for studying the phase composition of a gel coating, the degree of completion of the hydrolysis of an organosilicon component, and adjusting the parameters for obtaining a high-quality fire-resistant binary coating of a sol SiO2 - flame retardant system are shown.

Influence of technology parameters of free-cutting steel continuous casting on the billet internal structure

2020 ◽  
Vol 76 (2) ◽  
pp. 139-142
Author(s):  
A. T. Kunakbaeva ◽  
A. M. Stolyarov ◽  
M. V. Potapova
Keyword(s):  
Regression Analysis ◽  
Continuous Casting ◽  
Internal Structure ◽  
Sulfur Content ◽  
Manganese Content ◽  
High Quality ◽  
Correlation And Regression Analysis ◽  
Cutting Steel ◽  
Continuously Cast

Free-cutting steel gains specific working properties thanks to the high content of sulfur and phosphorus. These elements, especially sulfur, have a rather high tendency to segregation. Therefore, segregation defects in free-cutting steel continuously cast billets can be significantly developed. The aim of the work was to study the influence of the chemical composition of freecutting steel and casting technological parameters on the quality of the macrostructure of continuously cast billets. A metallographic assessment of the internal structure of cast metal made of free-cutting steel and data processing by application of correlation and regression analysis were the research methods. The array of production data of 43 heats of free-cutting steel of grade A12 was studied. Steel casting on a five-strand radial type continuous casting machine was carried out by various methods of metal pouring from tundish into the molds. Metal of 19 heats was poured with an open stream, and 24 heats – by a closed stream through submerged nozzles with a vertical hole. High-quality billets had a cross-sectional size of 150×150 mm. The macrostructure of high-quality square billets made of free-cutting steel of A12 grade is characterized by the presence of central porosity, axial segregation and peripheral point contamination, the degree of development of which was in the range from 1.5 to 2.0 points, segregation cracks and strips – about 1.0 points. In the course of casting with an open stream, almost all of these defects are more developed comparing with the casting by a closed stream. As a result of correlation and regression analysis, linear dependences of the development degree of segregation cracks and strips both axial and angular on the sulfur content in steel and on the ratio of manganese content to sulfur content were established. The degree of these defects development increases with growing of sulfur content in steel of A12 grade. These defects had especially strong development when sulfur content in steel was of more than 0.10%. To improve the quality of cast metal, it is necessary to have the ratio of the manganese content to the sulfur content in the metal more than eight.

Organic Light Emitting Diodes - Innovative Light Sources

2019 ◽  
pp. 101-107
Author(s):  
Sergei A. Stakharny
Keyword(s):  
Light Source ◽  
Organic Light Emitting Diodes ◽  
Organic Leds ◽  
Light Sources ◽  
High Quality ◽  
Light Emitting ◽  
Organic Light ◽  
Lighting Systems ◽  
Physical Principles ◽  
Prospects Of Application

This article is a review of the new light source – organic LEDs having prospects of application in general and special lighting systems. The article describes physical principles of operation of organic LEDs, their advantages and principal differences from conventional non-organic LEDs and other light sources. Also the article devoted to contemporary achievements and prospects of development of this field in the spheres of both general and museum lighting as well as other spheres where properties of organic LEDs as high-quality light sources may be extremely useful.

Analysis Criteria for Choosing Energy Efficient High-Quality Light Sources and Luminaires

2018 ◽  
pp. 113-119
Author(s):  
Gennady Ya. Vagin ◽  
Eugene B. Solntsev ◽  
Oleg Yu. Malafeev
Keyword(s):  
Energy Efficiency ◽  
Energy Efficient ◽  
National Standards ◽  
Light Sources ◽  
The European Union ◽  
High Quality ◽  
Eu Directive ◽  
The World ◽  
A New Technique ◽  
Energy Labelling

The article analyses critera applying to the choice of energy efficient high quality light sources and luminaires, which are used in Russian domestic and international practice. It is found that national standards GOST P 54993–2012 and GOST P 54992– 2012 contain outdated criteria for determining indices and classes of energy efficiency of light sources and luminaires. They are taken from the 1998 EU Directive #98/11/EU “Electric lamps”, in which LED light sources and discharge lamps of high intensity were not included. A new Regulation of the European Union #874/2012/EU on energy labelling of electric lamps and luminaires, in which these light sources are taken into consideration, contains a new technique of determining classes of energy efficiency and new, higher classes are added. The article has carried out a comparison of calculations of the energy efficiency classes in accordance with GOST P 54993 and with Regulation #874/2012/EU, and it is found out that a calculation using GOST P 54993 gives underrated energy efficiency classes. This can lead to interdiction of export for certain light sources and luminaires, can discredit Russian domestic manufacturer light sources and does not correspond to the rules of the World Trade Organization (WTO).

The Influence Of The Led Luminaires Electrical Parameters On Their Correlated Colour Temperature During Operation Mode

2020 ◽  
pp. 89-96
Author(s):  
Sergei S. Kapitonov ◽  
Alexei S. Vinokurov ◽  
Sergei V. Prytkov ◽  
Sergei Yu. Grigorovich ◽  
Anastasia V. Kapitonova ◽  
...  
Keyword(s):  
Operation Mode ◽  
Light Sources ◽  
Electrical Parameters ◽  
Colour Temperature ◽  
Radiation Spectra ◽  
Service Period ◽  
Close Proximity ◽  
Definition Of ◽  
Comprehensive Study

The article describes the results of comprehensive study aiming at increase of quality of LED luminaires and definition of the nature of changes in their correlated colour temperature (CCT) in the course of operation. Dependences of CCT of LED luminaires with remote and close location of phosphor for 10 thousand hours of operation in different electric modes were obtained; the results of comparison between the initial and final radiation spectra of the luminaires are presented; using mathematical statistics methods, variation of luminaire CCT over the service period claimed by the manufacturer is forecast; the least favourable electric operation modes with the highest CCT variation observed are defined. The obtained results have confirmed availability of the problem of variation of CCT of LED luminaires during their operation. Possible way of its resolution is application of more qualitative and therefore expensive LEDs with close proximity of phosphor or LEDs with remote phosphor. The article may be interesting both for manufacturers and consumers of LED light sources and lighting devices using them.

Sign in / Sign up

Export Citation Format

Share Document