scholarly journals The capillary adhesion technique: a versatile method for determining the liquid adhesion force and sample stiffness

nano Online ◽  
2016 ◽  
Author(s):  
Daniel Gandyra ◽  
Stefan Walheim ◽  
Stanislav Gorb ◽  
Wilhelm Barthlott ◽  
Thomas Schimmel
Keyword(s):  
Adhesion Force ◽  
Capillary Adhesion

scholarly journals The capillary adhesion technique: a versatile method for determining the liquid adhesion force and sample stiffness

2015 ◽  
Vol 6 ◽  
pp. 11-18 ◽  
Author(s):  
Daniel Gandyra ◽  
Stefan Walheim ◽  
Stanislav Gorb ◽  
Wilhelm Barthlott ◽  
Thomas Schimmel
Keyword(s):  
Elastic Properties ◽  
Adhesion Force ◽  
Human Head ◽  
Adhesion Forces ◽  
Functional Surface ◽  
Liquid Meniscus ◽  
Capillary Adhesion ◽  
Small Structure ◽  
Spring Constants

We report a novel, practical technique for the concerted, simultaneous determination of both the adhesion force of a small structure or structural unit (e.g., an individual filament, hair, micromechanical component or microsensor) to a liquid and its elastic properties. The method involves the creation and development of a liquid meniscus upon touching a liquid surface with the structure, and the subsequent disruption of this liquid meniscus upon removal. The evaluation of the meniscus shape immediately before snap-off of the meniscus allows the quantitative determination of the liquid adhesion force. Concurrently, by measuring and evaluating the deformation of the structure under investigation, its elastic properties can be determined. The sensitivity of the method is remarkably high, practically limited by the resolution of the camera capturing the process. Adhesion forces down to 10 µN and spring constants up to 2 N/m were measured. Three exemplary applications of this method are demonstrated: (1) determination of the water adhesion force and the elasticity of individual hairs (trichomes) of the floating fern Salvinia molesta. (2) The investigation of human head hairs both with and without functional surface coatings (a topic of high relevance in the field of hair cosmetics) was performed. The method also resulted in the measurement of an elastic modulus (Young’s modulus) for individual hairs of 3.0 × 105 N/cm2, which is within the typical range known for human hair. (3) Finally, the accuracy and validity of the capillary adhesion technique was proven by examining calibrated atomic force microscopy cantilevers, reproducing the spring constants calibrated using other methods.

scholarly journals Study of buckling behavior at the nanoscale through capillary adhesion force

2018 ◽  
Vol 112 (19) ◽  
pp. 193102 ◽  
Author(s):  
Matteo Lorenzoni ◽  
Jordi Llobet ◽  
Francesc Perez-Murano
Keyword(s):  
Adhesion Force ◽  
Capillary Adhesion ◽  
Buckling Behavior

Real-time manipulation fluid-solid interfacial friction and adhesion force by electrowetting on dielectric

2021 ◽  
pp. 106985
Author(s):  
Cheng Tang ◽  
Yafeng Zhang ◽  
Conghui Dong ◽  
Jiaxin Yu ◽  
Jianping Lai ◽  
...  
Keyword(s):  
Real Time ◽  
Adhesion Force ◽  
Interfacial Friction ◽  
Electrowetting On Dielectric ◽  
Time Manipulation

Design of a wheeled wall climbing robot based on the performance of bio-inspired dry adhesive material

Robotica ◽  
2021 ◽  
pp. 1-14
Author(s):  
Hongkai Li ◽  
Xianfei Sun ◽  
Zishuo Chen ◽  
Lei Zhang ◽  
Hongchao Wang ◽  
...  
Keyword(s):  
Flat Surface ◽  
Thrust Force ◽  
Adhesion Force ◽  
Structure Design ◽  
Design Parameters ◽  
Climbing Robot ◽  
Adhesive Material ◽  
Ducted Fan ◽  
The Stability ◽  
Belt System

Abstract Inspired by gecko’s adhesive feet, a wheeled wall climbing robot is designed in this paper with the synchronized gears and belt system acting as the wheels by considering both motion efficiency and adhesive capability. Adhesion of wheels is obtained by the bio-inspired adhesive material wrapping on the outer surface of wheels. A ducted fan mounted on the back of the robot supplies thrust force for the adhesive material to generate normal and shear adhesion force whilemoving on vertical surfaces. Experimental verification of robot climbing on vertical flat surface was carried out. The stability and the effect of structure design parameters were analyzed.

scholarly journals Interaction and Adsorption of Hydrophobically Modified Polyacrylamide on Silica and Asphaltene Surfaces

2019 ◽  
Vol 2019 ◽  
pp. 1-8 ◽  
Author(s):  
Wenjie Zou ◽  
Zichuan Fang ◽  
Zhijun Zhang ◽  
Zhenzhen Lu
Keyword(s):  
Oil Recovery ◽  
Adhesion Force ◽  
Interaction Mechanism ◽  
Surface Force ◽  
Industrial Applications ◽  
Oil Sand ◽  
Continuous Adsorption ◽  
Hydrophobically Modified Polyacrylamide ◽  
Hydrophobically Modified ◽  
Modified Polyacrylamide

The adsorption of polymers affects the cost and oil recovery in oil reservoir exploitation and the flocculation effect in the treatment of oil sand tailings. The adhesion and adsorption of a hydrophobically modified polyacrylamide (HMPAM), i.e., P(AM-NaAA-C16DMAAC), on silica and asphaltene were investigated using surface force measurements, thermodynamic analysis and quartz crystal microbalance with dissipation (QCM-D) measurement. Our study indicates that HMPAM polymer has strong interaction with both silica and asphaltene. The adhesion force of HMPAM on silica was stronger than that on asphaltene surface. Consistently, the adsorption of HMPAM was also greater on silica surface, with a more rigid layer formed on the surface. For HMPAM/silica system, the attractive interaction and the strong adhesion are mainly driven by the hydrogen bonding and electrostatic interaction. For HMPAM/asphaltene system, it is mainly due to hydrophobic interaction between the long hydrocarbon chains of HMPAM and asphaltene. Furthermore, continuous adsorption of HMPAM was detected and multiple layers formed on both silica and asphaltene surfaces, which can be attributed to the hydrophobic chains of HMPAM polymers. This work has illustrated the interaction mechanism of HMPAM polymer on hydrophilic silica and hydrophobic asphaltene surfaces, which provide insight into the industrial applications of hydrophobically modified polymer.

scholarly journals Application of Artificial Intelligence (AI) for Sustainable Highway and Road System

Symmetry ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 60
Author(s):  
Md Arifuzzaman ◽  
Muhammad Aniq Gul ◽  
Kaffayatullah Khan ◽  
S. M. Zakir Hossain
Keyword(s):  
Experimental Data ◽  
High Performance ◽  
Adhesion Force ◽  
Model Development ◽  
Real Life ◽  
Bayesian Optimization ◽  
Support Vector ◽  
Adhesive Properties ◽  
Bayesian Optimization Algorithm ◽  
The Mean

There are several environmental factors such as temperature differential, moisture, oxidation, etc. that affect the extended life of the modified asphalt influencing its desired adhesive properties. Knowledge of the properties of asphalt adhesives can help to provide a more resilient and durable asphalt surface. In this study, a hybrid of Bayesian optimization algorithm and support vector regression approach is recommended to predict the adhesion force of asphalt. The effects of three important variables viz., conditions (fresh, wet and aged), binder types (base, 4% SB, 5% SB, 4% SBS and 5% SBS), and Carbon Nano Tube doses (0.5%, 1.0% and 1.5%) on adhesive force are taken into consideration. Real-life experimental data (405 specimens) are considered for model development. Using atomic force microscopy, the adhesive strength of nanoscales of test specimens is determined according to functional groups on the asphalt. It is found that the model predictions overlap with the experimental data with a high R2 of 90.5% and relative deviation are scattered around zero line. Besides, the mean, median and standard deviations of experimental and the predicted values are very close. In addition, the mean absolute Error, root mean square error and fractional bias values were found to be low, indicating the high performance of the developed model.

scholarly journals Assessing the Functional Properties of TiZr Nanotubular Structures for Biomedical Applications, through Nano-Scratch Tests and Adhesion Force Maps

Molecules ◽  
2021 ◽  
Vol 26 (4) ◽  
pp. 900
Author(s):  
Maria Vardaki ◽  
Aida Pantazi ◽  
Ioana Demetrescu ◽  
Marius Enachescu
Keyword(s):  
Surface Roughness ◽  
Functional Properties ◽  
Bacterial Adhesion ◽  
Biomedical Applications ◽  
Adhesion Force ◽  
Roughness Parameters ◽  
Force Microscopy ◽  
Atomic Force ◽  
The Mean ◽  
Scratch Tests

In this work we present the results of a functional properties assessment via Atomic Force Microscopy (AFM)-based surface morphology, surface roughness, nano-scratch tests and adhesion force maps of TiZr-based nanotubular structures. The nanostructures have been electrochemically prepared in a glycerin + 15 vol.% H2O + 0.2 M NH4F electrolyte. The AFM topography images confirmed the successful preparation of the nanotubular coatings. The Root Mean Square (RMS) and average (Ra) roughness parameters increased after anodizing, while the mean adhesion force value decreased. The prepared nanocoatings exhibited a smaller mean scratch hardness value compared to the un-coated TiZr. However, the mean hardness (H) values of the coatings highlight their potential in having reliable mechanical resistances, which along with the significant increase of the surface roughness parameters, which could help in improving the osseointegration, and also with the important decrease of the mean adhesion force, which could lead to a reduction in bacterial adhesion, are providing the nanostructures with a great potential to be used as a better alternative for Ti implants in dentistry.

Sign in / Sign up

Export Citation Format

Share Document