scholarly journals Generation and dynamics of soliton and soliton molecules from a VSe2/GO-based fiber laser

Nanophotonics ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Benhai Wang ◽  
Haobin Han ◽  
Lijun Yu ◽  
Yueyue Wang ◽  
Chaoqing Dai
Keyword(s):  
Numerical Simulation ◽  
Fiber Laser ◽  
Saturable Absorber ◽  
Pulse Width ◽  
Fiber Lasers ◽  
Modulation Depth ◽  
Mode Locking ◽  
Pulse Interval ◽  
Saturable Absorption ◽  
Soliton Dynamics

Abstract Recently, in addition to exploring the application of new saturable absorber devices in fiber lasers, soliton dynamics has also become a focus of current research. In this article, we report an ultrashort pulse fiber laser based on VSe2/GO nanocomposite and verify the formation process of soliton and soliton molecules by the numerical simulation. The prepared VSe2/GO-based device shows excellent saturable absorption characteristics with a modulation depth of 14.3% and a saturation absorption intensity of 0.93 MW/cm2. The conventional soliton is obtained with pulse width of 573 fs, which is currently the narrowest pulse width based on VSe2-related material, and has a signal-to-noise ratio of 60.4 dB. In addition, the soliton molecules are realized based on the VSe2/GO for the first time and have a pulse interval of ∼2.2 ps. We study the soliton dynamics through numerical simulation and reveal that before the formation of the soliton, it undergoes multiple nonlinear stages, such as soliton mode-locking, soliton splitting, and soliton oscillation. Furthermore, the results of numerical simulation are agreed well with the experimental data. These results indicate that the VSe2/GO might be another promising saturable absorber material for ultrafast photonics, and deepen the understanding of soliton dynamics in ultrafast fiber lasers.

Passively harmonic mode-locked fiber laser based on ReS2 saturable absorber

2017 ◽  
Vol 31 (18) ◽  
pp. 1750206 ◽  
Author(s):  
Feifei Lu
Keyword(s):  
Pump Power ◽  
Fiber Laser ◽  
Output Power ◽  
Saturable Absorber ◽  
Repetition Rate ◽  
Mode Locking ◽  
High Repetition Rate ◽  
Pulse Interval ◽  
Saturable Absorption ◽  
Harmonic Mode

We demonstrate the generation of harmonic mode-locking (HML) in an erbium-doped fiber laser with a microfiber-based rhenium disulfide (ReS2) saturable absorber (SA). Taking advantages of both saturable absorption and large third-order nonlinear effect of ReS2, HML pulse with 318.5 MHz repetition rate can be obtained, corresponding to 168th harmonic of fundamental repetition frequency of 1.896 MHz. When the pump power is increased gradually, the pulse interval remains constant, while the output power increases linearly. At the pump power of 450 mW, the output power is [Formula: see text]12 mW. The proposed high-repetition-rate pulse lasers would attract considerable attention due to its potential applications in soliton communications and frequency combs.

scholarly journals Ultrafast Fiber Lasers with Low-Dimensional Saturable Absorbers: Status and Prospects

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3676
Author(s):  
Pulak Chandra Debnath ◽  
Dong-Il Yeom
Keyword(s):  
Fiber Laser ◽  
Fiber Lasers ◽  
Near Infrared ◽  
Modulation Depth ◽  
Mode Locking ◽  
Saturable Absorption ◽  
Laser Applications ◽  
Integration Schemes ◽  
Pulsed Fiber Laser ◽  
Low Dimensional

Wide-spectral saturable absorption (SA) in low-dimensional (LD) nanomaterials such as zero-, one-, and two-dimensional materials has been proven experimentally with outstanding results, including low saturation intensity, deep modulation depth, and fast carrier recovery time. LD nanomaterials can therefore be used as SAs for mode-locking or Q-switching to generate ultrafast fiber laser pulses with a high repetition rate and short duration in the visible, near-infrared, and mid-infrared wavelength regions. Here, we review the recent development of emerging LD nanomaterials as SAs for ultrafast mode-locked fiber laser applications in different dispersion regimes such as anomalous and normal dispersion regimes of the laser cavity operating in the near-infrared region, especially at ~1550 nm. The preparation methods, nonlinear optical properties of LD SAs, and various integration schemes for incorporating LD SAs into fiber laser systems are introduced. In addition to these, externally (electrically or optically) controlled pulsed fiber laser behavior and other characteristics of various LD SAs are summarized. Finally, the perspectives and challenges facing LD SA-based mode-locked ultrafast fiber lasers are highlighted.

scholarly journals Dynamics of carbon nanotube-based mode-locking fiber lasers

Nanophotonics ◽  
2020 ◽  
Vol 9 (9) ◽  
pp. 2731-2761 ◽  
Author(s):  
Lin Huang ◽  
Yusheng Zhang ◽  
Xueming Liu
Keyword(s):  
Carbon Nanotube ◽  
Fiber Lasers ◽  
Modulation Depth ◽  
Laser System ◽  
Physical Nature ◽  
Mode Locking ◽  
Environmental Stability ◽  
Saturation Intensity ◽  
Soliton Dynamics ◽  
Deep Modulation

AbstractCarbon nanotube (CNT) can work as excellent saturable absorber (SA) due to its advantages of fast recovery, low saturation intensity, polarization insensitivity, deep modulation depth, broad operation bandwidth, outstanding environmental stability, and affordable fabrication. Its successful application as SA has promoted the development of scientific research and practical application of mode-locked fiber lasers. Besides, mode-locked fiber laser constitutes an ideal platform for investigating soliton dynamics which exhibit profound nonlinear optical dynamics and excitation ubiquitous in many fields. Up to now, a variety of soliton dynamics have been observed. Among these researches, CNT-SA is a key component that suppresses the environmental perturbation and optimizes the laser system to reveal the true highly stochastic and non-repetitive unstable phenomena of the initial self-starting lasing process. This review is intended to provide an up-to-date introduction to the development of CNT-SA based ultrafast fiber lasers, with emphasis on recent progress in real-time buildup dynamics of solitons in CNT-SA mode-locked fiber lasers. It is anticipated that study of dynamics of solitons can not only further reveal the physical nature of solitons, but also optimize the performance of ultrafast fiber lasers and eventually expand their applications in different fields.

scholarly journals Highly Stable Passively Q-Switched Erbium-Doped All-Fiber Laser Based on Niobium Diselenide Saturable Absorber

Molecules ◽  
2021 ◽  
Vol 26 (14) ◽  
pp. 4303
Author(s):  
Ping Hu ◽  
Jiajia Mao ◽  
Hongkun Nie ◽  
Ruihua Wang ◽  
Baitao Zhang ◽  
...  
Keyword(s):  
Fiber Laser ◽  
Saturable Absorber ◽  
Pulse Width ◽  
Nonlinear Optical ◽  
Modulation Depth ◽  
Transition Metal Dichalcogenide ◽  
Center Wavelength ◽  
Niobium Diselenide ◽  
Erbium Doped ◽  
Layered Transition Metal

A saturable absorber (SA) based on niobium diselenide (NbSe2), which is a layered transition metal dichalcogenide (TMD) in the VB group, is fabricated by the optically driven deposition method, and the related nonlinear optical properties are characterized. The modulation depth, saturable intensity, and nonsaturable loss of the as-prepared NbSe2 nanosheet-based SA are measured to be 16.2%, 0.76 MW/cm2, and 14%, respectively. By using the as-fabricated NbSe2 SA, a highly stable, passively Q-switched, erbium-doped, all-fiber laser is realized. The obtained shortest pulse width is 1.49 μs, with a pulse energy of 48.33 nJ at a center wavelength of 1560.38 nm. As far as we know, this is the shortest pulse duration ever obtained by an NbSe2 SA in a Q-switched fiber laser.

Passively mode-locked in Er-doped fiber laser based on semi-metallic InBi saturable absorber

2021 ◽  
Author(s):  
Jianwei Hu ◽  
Rong Huang ◽  
Ziqiao Wei ◽  
Minru Wen ◽  
Fugen Wu ◽  
...  
Keyword(s):  
Fiber Laser ◽  
Modulation Depth ◽  
Mode Locking ◽  
Nodal Line ◽  
Saturable Absorption ◽  
Optical Nonlinearities ◽  
Passive Mode ◽  
Central Wavelength ◽  
Two Dimensional Materials ◽  
Er Doped

Abstract Two-dimensional materials have drawn great interest for their applications in mode-locking owning to their unique optical nonlinearities. However, most of these 2D materials are semi-conductor. In this study, a new kind of semimetal Indium bismuth (InBi) is reported which is a topological nodal-line semimetal with exotic physical properties. The InBi nanomaterials was prepared through liquid phase exfoliation method with average thickness of 32.8 nm. The saturable absorption property was measured and passive mode-locking operation was achieved successfully in Er-doped fiber laser. It exhibits a modulation depth of 3.21%, a saturable intensity of 100 MW/cm2, and a pulse width about 859.97 fs corresponding to the central wavelength of 1562.27 nm and 3-dB bandwidth of 2.98 nm. The experimental results open a new avenue for the use of semimetals InBi nanomaterials in lasers and photonics applications.

scholarly journals Highly efficient mode-locked and Q-switched Er3+-doped fiber lasers using a gold nanorod saturable absorber

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yin-Wen Lee ◽  
Chien-Ming Chen ◽  
Wei-Hsiang Chuang ◽  
Ching-Yi Cho ◽  
Cheng-Hsien Yu ◽  
...  
Keyword(s):  
Thin Film ◽  
Fiber Laser ◽  
Saturable Absorber ◽  
Fiber Lasers ◽  
Modulation Depth ◽  
Maximum Energy ◽  
Gold Nanorod ◽  
Dual Function ◽  
Saturation Intensity ◽  
Pulsed Fiber Laser

AbstractMode-locked and Q-switched pulsed fiber laser sources with wavelengths of 1.55 μm are widely used in various fields. Gold nanorods (GNRs) have been applied in biomedicine and optics owing to their biocompatibility, easy fabrication, and unique optical properties. This paper presents the analysis of a saturable absorber based on a colloidal gold nanorod (GNR) thin film for dual-function passively mode-locked and Q-switched 1.55-μm fiber lasers. The colloidal GNR thin film possesses superior properties such as a wide operating wavelength range, large nonlinear absorption coefficient, and a picosecond-order recovery time. Its modulation depth and saturation intensity at 1.55 μm are 7.8% and 6.55 MW/cm2, respectively. Passive mode-locked or Q-switched laser operation is achieved by changing the number of GNR thin-film layers. The advantages of these high-quality GNRs in mode-locked and Q-switched fiber lasers with record-high slope efficiency are verified by conducting comprehensive material and laser dynamic analyses. The self-starting mode-locked fiber laser with an efficiency as high as 24.91% and passively Q-switched fiber laser with the maximum energy of 0.403 μJ are successfully demonstrated. This paper presents the novel demonstration of reconfigurable mode-locked and Q-switched all-fiber lasers by incorporating colloidal GNR thin films.

scholarly journals All-fiber passively mode-locked femtosecond fiber lasers

2021 ◽  
Author(s):  
Jiaqi Zhou
Keyword(s):  
Fiber Laser ◽  
Pulse Energy ◽  
Pulse Width ◽  
Fiber Lasers ◽  
High Efficiency ◽  
Single Mode ◽  
Scaling Up ◽  
Mode Locking ◽  
Raman Signal ◽  
Loop Mirror

This dissertation presents three all-fiber designs of passively mode-locked lasers in order to achieve high pulse energy, environmentally-stable dissipative soliton (DS) operation in all-normal-dispersion cavities. A numerical model for DS mode-locked fiber lasers based on the nonlinear Schrodinger equation has been used to guide the experimental designs. Firstly, an environmentally-stable and ultra-compact SESAM mode-locked fiber laser is demonstrated. The all-fiber design is realized using a mode-field-adaptor (MFA) to couple light onto the SESAM. A polarization-maintaining fiber loop mirror serves multiple functions as a highly reflective mirror, an output coupler and polarization selector. Self-starting and stable DS mode-locking operation is achieved with 1.7 nJ pulse energy and a 22 ps pulse width. Secondly, an ultra-stable DS mode-locking was demonstrated in a long cavity ring laser with a nonlinear amplified loop mirror (NALM) as a mode-locking device. The output pulses of 32 nJ, 615 fs de-chirped pulse width were obtained with the Raman signal suppressed below -20 dB in a 81 m long cavity. The mode-locking is self-starting and the mode-locked pulse train shows excellent stability. Thirdly, the mode-laser cavity was extended with a piece of large-mode-area (LMA) fiber with a low dispersion to further scaling up the pulse energy to 56.8 nJ. The laser pulses were compressed to 750 fs by a pair of volume gratings. In the processing of scaling-up the pulse energy of the NALM mode-locked fiber laser, some interesting physical phenomena were observed, such as the operation regime transition from noise-like to DS with a sudden reduction of Raman signal and a unique waves-splitting with a stable temporal spacing. The phenomena were studied and explained in this dissertation. In addition to the mode-locked fiber laser, a CW and a Q-switched fiber lasers were also designed with a single-mode- multimode- single-mode (SMS) filter as an effective mean of overcoming nonlinear effects. The transmission spectral property of the SMS was studied which fits well with theoretical calculation. One high efficiency SMS CW fiber lasers and one SMS Q-switched fiber laser were designed which showed the effectiveness of the SMS filter for inhibiting the SRS and significantly reducing SPM.

Carbon Nanomaterials Based Saturable Absorbers for Ultrafast Passive Mode-Locking of Fiber Lasers

2020 ◽  
Vol 16 (3) ◽  
pp. 441-457
Author(s):  
Chih-Hsien Cheng ◽  
Gong-Ru Lin
Keyword(s):  
Saturable Absorber ◽  
Fiber Lasers ◽  
Carbon Nanomaterials ◽  
Modulation Depth ◽  
Optical Nonlinearity ◽  
Mode Locking ◽  
Industrial Applications ◽  
Passive Mode ◽  
Saturable Absorbers ◽  
Saturation Intensity

This paper emphasizes on overviewing the developing progress of the state-of-the-art carbon nanomaterial-based saturable absorbers for passively mode-locked fiber lasers, including carbon nanotube (CNT), graphene, graphite and other carbon nanomaterials. With reviewing the performances of these proposed candidates, the characteristic parameters required for initiating and stabilizing the passive mode-locked fiber lasers are summarized for comparison and discussion. At first, the basic characteristics such as saturation intensity and self-amplitude-modulation (SAM) coefficients of the CNT material with different-wall types are discussed in detail. In comparison, the single-wall CNT possesses optical nonlinearity better than double-wall CNT, whereas the doublewall CNT exhibits wavelength tenability and the multi-wall CNT fails to initiate mode-locking. Subsequently, different graphene saturable absorbers with slightly changing their optical properties made by various fabrication technologies are introduced to take over the role of typical CNT saturable absorber. The detailed analyses on graphene saturable absorber for developing various types of passively mode-locked fiber lasers are overviewed. At last, other new-aspect graphite and carbon nanomaterials related saturable absorbers have emerged because they reveal similar optical nonlinearity with graphene but exhibit cost-effectiveness and easy-production. When changing saturable absorber from graphene to other carbon nanomaterials, the modulation depth is decreased but the saturation intensity is concurrently enlarged because of the disordered structure with increased interlayer spacing and reduced graphene content. At the current stage, selecting carbon nanomaterials with high nonlinear absorbance and low saturated intensity for large SAM coefficient is the golden rule for passively mode-locked the fiber lasers in future academic and industrial applications.

scholarly journals Graphite Saturable Absorber for Q-Switched Fiber Laser

2018 ◽  
Vol 7 (4.30) ◽  
pp. 334
Author(s):  
Yushazlina R. Yuzaile ◽  
Noor A. Awang ◽  
Zahariah Zakaria ◽  
Noor U.H.H Zalkepali ◽  
Amirah A. Latif ◽  
...  
Keyword(s):  
Fiber Laser ◽  
Saturable Absorber ◽  
Pulse Width ◽  
Modulation Depth ◽  
Signal To Noise Ratio ◽  
Optical Signal ◽  
Signal To Noise ◽  
Saturation Intensity ◽  
Maximum Pulse Energy ◽  
Optical Fiber Applications

This paper reported a successful demonstration on Q-switched fiber laser by using graphite as saturable absorber (SA). The graphite is deposited on the fiber ferrule through a simple mechanical exfoliation method. The modulation depth of the graphite SA is 19.2% with a saturation intensity of 85 MW/cm². The maximum achievable pulse repetition rates and pulse width are 42.41 kHz and 3.40 μs respectively. Meanwhile, its optical signal-to-noise ratio is about 50.81 dB. The Q-switched pulses have the maximum pulse energy of 5.84 nJ. These outcomes demonstrated that a stable output of passively Q-switched fiber laser is produced and can be applied for various optical fiber applications.

scholarly journals Bright Soliton and Bright–Dark Soliton Pair in an Er-Doped Fiber Laser Mode-Locked Based on In2Se3 Saturable Absorber

2021 ◽  
Vol 9 ◽  
Author(s):  
Qin Wei ◽  
Xile Han ◽  
Huanian Zhang ◽  
Chonghui Li ◽  
Chao Zhang ◽  
...  
Keyword(s):  
Fiber Laser ◽  
Output Power ◽  
Saturable Absorber ◽  
High Power ◽  
Fiber Lasers ◽  
Physical Vapor Deposition ◽  
Modulation Depth ◽  
Polarization State ◽  
Average Output ◽  
Stable Mode

The output power in ultrafast fiber lasers is usually limited due to the lack of a versatile saturable absorber with high damage threshold and large modulation depth. Here we proposed a more efficient strategy to improve the output energy of erbium-doped fiber laser based on indium selenide (In2Se3) prepared by using the physical vapor deposition (PVD) method. Finally, stable mode-locked bright pulses and triple-wavelength dark–bright pulse pair generation were obtained successfully by adjusting the polarization state. The average output power and pulse energy were 172.4 mW/101 nJ and 171.3 mW/100 nJ, which are significantly improved compared with the previous work. These data demonstrate that the PVD-In2Se3 can be a feasible nonlinear photonic material for high-power fiber lasers, which will pave a fresh avenue for the high-power fiber laser.

Sign in / Sign up

Export Citation Format

Share Document