scholarly journals Characteristics of Environmentally Friendly Food Container Composite Made From Sorghum Bagasse and Citric Acid

2020 ◽  
Vol 9 (2) ◽  
pp. 103-112
Author(s):  
Ismadi Ismadi ◽  
Sukma Surya Kusumah ◽  
Subyakto Subyakto ◽  
Bambang Subiyanto ◽  
Lisman Suryanegara ◽  
...  
Keyword(s):  
Citric Acid ◽  
Raw Materials ◽  
Physical And Mechanical Properties ◽  
Environmentally Friendly ◽  
Raw Material ◽  
Food Container ◽  
Sustainable Resources ◽  
Sorghum Bagasse ◽  
Local Species ◽  
The Common

The common food container product was made from plastic such as polypropylene, polystyrene, etc which has slowed to degrade hence affected to the environmental pollution and health disorder. Therefore, environmentally friendly food container composite is developed from sustainable resources such as sorghum bagasse and citric acid. The effects of sorghum species, sorghum particles and citric acid content on the composite properties were investigated. Local species of sorghum was used as raw material such as Super 2 in the manufacturing of food packaging.  The size and moisture content of the particles were passthrough on 40 mesh and 10%, respectively. The content of the particle was variated such as 10, 15, and 20% wt. Furthermore, citric acid was used as a binder with difference content such as 10, 20, and 30% wt.  Those raw materials were mixed with tapioca starch, polyvinyl alcohol (PVA), and glutaraldehyde. The mixing material was hot pressed at 180 ℃ for 15 minutes. The composite dimension was 12 cm x 10 cm x 3 mm. The physical and mechanical properties of the composite were carried out. Considering the properties of the composite, sorghum bagasse and citric acid are suitable as raw material of food container composite.

Research on Simulation Test of Coal Similar Material

2013 ◽  
Vol 850-851 ◽  
pp. 847-850 ◽  
Author(s):  
Lin Chao Dai
Keyword(s):  
Compressive Strength ◽  
Raw Materials ◽  
Similarity Theory ◽  
Design Method ◽  
Uniform Design ◽  
Physical And Mechanical Properties ◽  
Raw Material ◽  
Similar Material ◽  
Cement Ratio ◽  
Water Cement Ratio

In order to study the coal and gas outburst similar simulation experiment, coal similar material was made up based on the similarity theory. Based on the previous similar material study, the cement, sand, water, activated carbon and coal powder was selected as the raw material of similar material. Meanwhile similar material matching program with 5 factors and 6 levels was designed by using Uniform Design Method. And the physical and mechanical properties of the similar material compressive strength was measured under different proportions circumstances. The relationship between similar material and the raw materials was analyzed. The results show that choosing different materials can compound different similar materials with different requirements. And the water-cement ratio plays a decisive influence on the compressive strength of similar material. The compressive strength of similar material decreases linearly when the water-cement ratio increases.

scholarly journals Selection of Fish Raw Material Suppliers by Integrating ANP and Topsis Methods in CV. Riki Utama Mandiri

2021 ◽  
Vol 1 (2) ◽  
Author(s):  
Aula Fajar Iman Sakti ◽  
Wiwik Sulistiyowati
Keyword(s):  
Supplier Selection ◽  
Raw Materials ◽  
Rank Order ◽  
Raw Material ◽  
Network Process ◽  
The Common ◽  
Common Problems ◽  
Frozen Fish ◽  
A Company ◽  
Selection Of

CV. Riki Utama Mandiri is a company in distributing an economic fish frozen product. This company distributed any kind of retail and wholesaler, both domestic and export. They distributing many frozen fish products variant such as Patin Fillet and Shark Fin. The all raw materials of those frozen seafood was obtained by three different suppliers. The common problems found in CV. Riki Utama Mandiri mostly about raw patin fish supplier which often committed delivery delays.  The purpose of this research is to fixing the supply chain management in deciding the more accurate selections of raw materials supplier. To overcome the common problems that happen. Analytical network process (ANP) will simplify the criteria weight values and sub criteria of each supplier. Meanwhile, technique for others reference by similarity to ideal solution (TOPSIS) method is used for giving a rank order of the alternative supplier. This research is expected for being a consideration for the company in obtaining a good and more effective kind of raw supplier. We also expecting the company for tighten supplier selection more effective way so that it can fullfilled the existing standard. Also to overcome the common problems such as delivery delays, competing raw materials with uncertain quality, and difficulty in sort out the raw materials due to size issues.

scholarly journals Potensi Minyak Kelapa Sawit Sebagai Bahan Baku Busa Pemadam Kebakaran Lahan Gambut di Indonesia: Suatu Tijauan Pustaka

2020 ◽  
Author(s):  
Purwo Subekti
Keyword(s):  
Palm Oil ◽  
Raw Materials ◽  
Value Added ◽  
Environmentally Friendly ◽  
Domestic Demand ◽  
Oil Products ◽  
Raw Material ◽  
Fire Extinguisher ◽  
Vegetable Raw Materials ◽  
Peat Fires

This researchs aims to to find out about the potential of palm oil as a raw material of foam firefighting peat fires in Indonesia.By using the method of literature approach to previous researchers, can be in the know that the vegetable raw materials with thepotential to be developed in Indonesia as a raw material of foam extinguishing peat fires is palm oil. In addition to theavailability of environmentally friendly palm oil is also guaranteed and sustained since 2015, Indonesia produced palm oil andits derivatives amounted to 32.5 million tons, to meet the domestic demand of 18.77% while exports amounted to 81.23%..Utilization of palm oil as a raw material foam fire extinguisher is one form of support to the Indonesian government in order toincrease the downstream and value-added palm oil products as well as reduce the level of risk of peat fires

POTENSI PENGEMBANGAN PLASTIK BIODEGRADABLE BERBASIS PATI SAGU DAN UBIKAYU DI INDONESIA / The Development Potential of Sago and Cassava Starch-Based Biodegradable Plastic in Indonesia

2017 ◽  
Vol 36 (2) ◽  
pp. 67
Author(s):  
Elmi Kamsiati ◽  
Heny Herawati ◽  
Endang Yuli Purwani
Keyword(s):  
Production Technology ◽  
Raw Materials ◽  
Environmentally Friendly ◽  
Biodegradable Plastics ◽  
Cassava Starch ◽  
Packaging Material ◽  
Biodegradable Plastic ◽  
Raw Material ◽  
Main Ingredient ◽  
Production Stages

<p>Plastic is a packaging materials that are widely used but has an adverse impact on the environment because it is difficult to degrade in nature. Production technology of biodegradable plastics from natural resources that have characteristic environmentally friendly has developed. Starch-based biodegradable plastic is a widely developed type because the production process is simple and the raw materials more readily available. The starch of cassava and sago has potential as a raw material of biodegradable plastic because of the availability and its characteristic. Also, to make starch as the main ingredient, plasticizers and structural strengthening materials are required to produce biodegradable plastic with excellent characteristics. The production stages of biodegradable plastics include mixing, heating, and casting. The starch-based biodegradable plastic that can apply to an environmentally friendly packaging material has an excellent opportunity developed in Indonesia.</p><p>Keywords: Starch, sago, cassava, biodegradable plastics, production technology</p><p> </p><p><strong>Abstrak</strong></p><p>Plastik merupakan bahan pengemas yang banyak digunakan namun berdampak buruk bagi lingkungan karena sulit terdegradasi di alam. Teknologi produksi plastik biodegradable atau bioplastik yang dibuat dari bahan alami dan ramah lingkungan sudah mulai dikembangkan. Plastik biodegradable berbahan dasar pati relatif lebih mudah diproduksi dan bahan baku mudah diperoleh. Pati ubi kayu dan sagu memiliki potensi sebagai bahan baku plastik biodegradable ditinjau dari ketersediaan dan karakteristiknya. Selain pati sebagai bahan utama, diperlukan pula plastisizer atau bahan pemlastis dan bahan penguat struktur untuk menghasilkan plastik biodegradable dengan karakteristik yang baik. Tahapan produksinya meliputi pencampuran, pemanasan, dan pencetakan. Plastik biodegradable berbahan dasar pati dapat digunakan sebagai bahan pengemas yang ramah lingkungan dan berpeluang besar dikembangkan.</p><p>Kata kunci: Pati, sagu, ubi kayu, bioplastik, teknologi produksi</p>

Ceramic Composition Material with Mullite Crystals Obtained from the Clayy Raw Material of Yakutia

2020 ◽  
Vol 992 ◽  
pp. 253-258
Author(s):  
M.P. Lebedev ◽  
V.N. Tagrov ◽  
E.S. Lukin
Keyword(s):  
Building Materials ◽  
Raw Materials ◽  
Practical Interest ◽  
Physical And Mechanical Properties ◽  
Ceramic Materials ◽  
Strength Properties ◽  
Raw Material ◽  
Composition Material ◽  
Material Base ◽  
Wide Range

The article deals with the manufacture of modern structural ceramic materials from clay and loam deposits of the Republic of Sakha (Yakutia). The importance and relevance of the development of the production of building materials from local raw materials is emphasized, since this will certainly affect the effectiveness of the construction complex as a whole. The successful development of the construction complex is capable of not only stimulating growth in all sectors of the economy, but also contributes to solving the most pressing social problems. Today, Yakutia has huge reserves of mineral raw materials for the production of a wide range of building materials and products. Of practical interest are wall materials made from clay soils. Given the features of the region’s raw material base, this work focuses on additional processing of traditional material. Controlling the complex physicochemical and structural-mechanical transformations that occur during heat treatment, a methodology has been developed for creating a composite material that will allow competitive innovative materials with enhanced strength properties to be produced with a reinforcing element with a glassy phase matrix of mullite crystals. The fabricated samples have a wide range of physical and mechanical properties and allow using it as a high-quality structural building ceramics, as well as industrial floor technical tile.

scholarly journals Analysis Physical and Mechanical Of Particle Boards Raw Materials Nipah Fruit Fiber

Teknomekanik ◽  
2019 ◽  
Vol 2 (1) ◽  
pp. 14-19
Author(s):  
M Saddikin ◽  
Hendri Nurdin ◽  
Primawati Primawati
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Raw Materials ◽  
Physical And Mechanical Properties ◽  
Average Density ◽  
Raw Material ◽  
Average Moisture Content ◽  
Particle Board ◽  
Wood Particles ◽  
Tapioca Flour

The raw materials of the timber industry, especially furniture, are increasingly difficult to obtain in the quantity and quality needed. The development efforts carried out were utilizing Nipah coir waste as a raw material for making particle boards. Particle boards are panel boards made of wood particles or materials containing lignocellulose. Nipah plants contain 27.3% lignin and 36.5% cellulose which has the potential to be used as raw material for particleboard production. This study aims to reveal the physical and mechanical properties of particleboards made from Nipah fruit fibre with adhesive using tapioca flour. The making of particle board is done with a ratio of 90%: 10%, 80%: 20%, 70%: 30%, 60%: 40%, by giving a pressure of 100 kg / cm2. Particle testing is carried out according to the JIS A 5908 standard (2003). From this study, the optimum results were obtained in variations of 60%:40%. The particle physical properties which have an average density value of 1.15 gr / cm3 and an average moisture content of 5.8%. While the mechanical properties obtained by the value of Modulus of Elasticity an average of 21,188.93 kg / cm2. This shows the particle board variations of 60%: 40% produced to meet the JIS A 5908 (2003) standard. Based on the analysis of the quality variations 60%: 40% of particle boards can be recommended as raw materials for interior furniture.

scholarly journals Introduction of research on sustainable and environmentally friendly wood-based materials

Impact ◽  
2020 ◽  
Vol 2020 (4) ◽  
pp. 73-75
Author(s):  
Kenji Umemura
Keyword(s):  
Citric Acid ◽  
Lignocellulosic Biomass ◽  
Carbon Fixation ◽  
Environmentally Friendly ◽  
Agricultural Wastes ◽  
The Other ◽  
Raw Material ◽  
Simple Preparation ◽  
Global Issue ◽  
Sustainable Materials

Wood-based materials are used for construction and furniture etc. The demand is expected to increase due to population growth and economic development. Wood-based materials are considered as sustainable material because wood is the main raw material. However, adhesives are indispensable when manufacturing those, and almost wood adhesives are made from chemicals derived from fossil resources. In recent years, breaking away from dependence on fossil resources has become an important global issue. One of the purposes of this work is to develop bio-based adhesives with simple preparation, low dependence of fossil resources and high adhesiveness. Novel bio-based adhesives using citric acid and/or sucrose are being researched. On the other hand, considering significant decrease of global forest area, alternative raw components for wood-based materials is desperately needed in the future. Un-utilized lignocellulosic biomass such as agricultural wastes would be promising for these. The utilization of agricultural wastes also contributes to carbon fixation of lignocellulosic biomass. Now, researchers at the Laboratory of Sustainable Materials are interested in developing new wood-based materials that combine agricultural wastes with bio-based adhesives. These efforts will make wood-based materials more sustainable and environmentally friendly.

scholarly journals USE OF TRAINING DISCUSSION AT LABORATORY AND PRACTICAL LESSONS WHILE IMPLEMENTING COMPETENCY BASED APPROACH

2017 ◽  
Vol 60 (7) ◽  
pp. 97
Author(s):  
Olga P. Sazhina ◽  
Oxana V. Glazkova ◽  
Alexandr A. Shabarin ◽  
Yulia I. Matyushkina
Keyword(s):  
Learning Process ◽  
Raw Materials ◽  
Sample Volume ◽  
Raw Material ◽  
Naturally Occurring ◽  
Common Activity ◽  
Competency Based ◽  
The Common ◽  
Effectiveness Of Training

An approach implemented in a higher school education system requires use of interactive forms in learning process. Using the example of organisation of laboratory and practical lessons "Methods of quality control with respect to raw materials and products of chemistry manufacture" the effectiveness of training discussions as an interactive form of learning while implementing a competency based approach was demonstrated. Analysis of natural magnetite, used as a raw material for production of iron by the pyrometallurgical method, was chosen as a subject of the discussion. Initially, students analyse State Standard (GOST) N 32517.1-2013 on their own. In class they analyse the Standard from the perspective of use of potentiometric titration instead of visual one under the supervision of instructors. They do modernization of technique for determining: correct a list of specimen used, solution strength, mass of magnetite sample, volume of a sample for titration; suggest a list of laboratory dishes and devices, make preliminary calculations and find out the calculation formula. In the course of discussion, the most preferable method of experiment is elaborated on and recorded. Upon completion a public discussion of the results is held. Each group analyses the obtained data, indicates the positive and negative sides of the suggested method for potentiometric determination of iron content in naturally occurring magnetite. Based on results of questionnaire survey having been held among students who took part in the pedagogic experiment, it was discovered that the proposed way of holding laboratory and practical lessons is more effective in comparison to the traditional one, while serving to unlock the students’ research potential. This way requires applying theoretical skills learned earlier to perform a particular research task. They also learn to work in a team, to sum up results of the common activity and hold responsibility for the results received. Moreover, public speaking is also an important point of learning process. The proposed methods of gaining skills for solution of training tasks facilitate development of intellectual, speaking and communicative students’ competences; they make future specialists more prepared for resolving real production issues.For citation:Sazhina O.P., Glazkova O.V., Shabarin A.A., Matyushkina Yu.I. Use of training discussion at laboratory and practical lessons while implementing competency based approach. Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol. 2017. V. 60. N 7. P. 97-101.

scholarly journals STUDY ON THE GRINDING TIME DURATION IMPACT ON THE PROPERTIES OF PAPER FROM ALTERNATIVE RAW MATERIALS

2020 ◽  
Vol 2020 (3) ◽  
pp. 24-31
Author(s):  
Z Galimova ◽  
◽  
H Babakhanova ◽  
M Abdunazarov ◽  
I Ismoilov ◽  
...  
Keyword(s):  
Raw Materials ◽  
Low Cost ◽  
Physical And Mechanical Properties ◽  
Strength Properties ◽  
Milling Process ◽  
Raw Material ◽  
Time Duration ◽  
Paper Production ◽  
Fiber Materials ◽  
The Impact

Both raw and recycled fiber materials are used for paper production. The increase in percentage use of the latter is due to their paper-forming properties, availability and low cost. The article explores the possibility of using pulp from the inner layer of mulberry twig bark. Mulberry twigs, after removing leaves, which are the main raw material in silk production, have no practical industrial application. Recycling waste - mulberry branches - for the production of pulp is therefore relevant as it is aimed at solving raw material and environmental problems. The purpose of this work is to use local raw materials for paper production, study the impact of processing method of the grinding process on paper forming properties. During grinding the mechanical processes of changes of fibers determine mainly structure of a paper sheet, and colloidal-physical processes - bind and ability of fibers to form strong, homogenous and smooth structure of paper. The structure of the sheet of paper facilitates excessive or "selective" ink absorption into the pores of the paper and thus predetermines the quality of reproduction during the printing process. Methods for determining the physical and mechanical properties of papers were used in this work, and changes in the surface structure of samples cast at various technological modes of the milling process were studied. The results of the study revealed that the addition of cellulose mass from the inner layer of mulberry twig bark helps to obtain a strong paper. The optical properties of the paper, which contains cotton and cellulose from the inner layer of mulberry branch bark, are explained by the whiteness of the added fibers themselves. The strength properties of the paper at a weight grinding degree of 300 CWR are explained by the bond between the split and strongly interwoven fibers of the cellulose fibers. It has been established that the addition of more than 30% cellulose from the inner layer of the mulberry branch bark to the paper pulp mass is undesirable, as this adversely affects the whiteness of the paper

Production of Cement Blocks and New Ceramic Materials with High Content of Glass Waste

2015 ◽  
Vol 663 ◽  
pp. 34-41 ◽  
Author(s):  
Fernanda Andreola ◽  
Isabella Lancellotti ◽  
Rosa Taurino ◽  
Cristina Leonelli ◽  
Luisa Barbieri
Keyword(s):  
Mechanical Properties ◽  
Environmental Impact ◽  
Economic Burden ◽  
Raw Materials ◽  
Glass Melting ◽  
Physical And Mechanical Properties ◽  
Ceramic Materials ◽  
Raw Material ◽  
Added Value ◽  
Glass Waste

Virgin raw materials can be partially replaced by glass waste in order to reduce the environmental impact being its recycling a significant problem for municipalities worldwide. In Italy in 2013, approximately 1,600,000 tons of container glass have been collected but it was not possible to recycle all of them in the glass melting process.This work is focused on the valorization of glass waste as raw material in new cement and ceramic products, to convert it from an environmental and economic burden to a profitable, added-value resource in the formulation of new mixes. Several parameters, such as grinding, forming, firing, etc. have been studied.It has been optimized the grinding and the reclaiming step of waste to obtain an alternative raw material for hot and cold consolidation processes. Chemical, physical and mechanical properties of products were carried out. The results show new real possibilities to use high amounts of glass waste as an alternative raw material in products consolidated either by hot or cold techniques, reducing the management problems of the glass waste.

Sign in / Sign up

Export Citation Format

Share Document