scholarly journals The structure of dislocations in hemp (Cannabis sativa L.) fibres and implications for mechanical behaviour

BioResources ◽  
2020 ◽  
Vol 15 (2) ◽  
pp. 2579-2595
Author(s):  
Albert Hernandez-Estrada ◽  
Mehedi Reza ◽  
Mark Hughes
Keyword(s):  
Mechanical Behaviour ◽  
Structural Changes ◽  
Cannabis Sativa ◽  
Deformation Behaviour ◽  
Cellulose Microfibrils ◽  
Wall Structure ◽  
Fibre Structure ◽  
Structure And Morphology ◽  
Transmission Electron ◽  
Axial Morphology

Elementary fibres isolated from mechanically processed technical hemp were axially sectioned and imaged with transmission electron microscopy (TEM) to reveal details of the axial morphology of dislocations in the fibre. The overall aim was to investigate the detailed axial structural changes that the fibres undergo during processing, to help better understand the alterations in the deformation behaviour the fibres undergo following processing. The images showed the structure and morphology of dislocations as well as the different forms of damage that processing produced in the fibre structure, such as misalignment of the microfibrils, delamination, and buckled cellulose microfibrils. Furthermore, the results of this work show the ability that axial sectioning of the fibre has to reveal new details of the cell wall structure of hemp to offer new insights in the study of the fibre structure. In turn, the results of this work may help explain the mechanical behaviour of the fibres when they are loaded, as well as help explain the greater chemical accessibility of dislocations, for example, when the fibre is acid hydrolysed.

Embedding Procedure for Water Swollen Samples

1970 ◽  
Vol 28 ◽  
pp. 504-505
Author(s):  
Ann M. Thomas ◽  
Virginia Shemeley
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Ion Exchange ◽  
Structural Changes ◽  
Cross Linking ◽  
Ion Exchange Resins ◽  
Transmission Electron ◽  
First Pass ◽  
Exchange Resins

Those samples which swell rapidly when exposed to water are, at best, difficult to section for transmission electron microscopy. Some materials literally burst out of the embedding block with the first pass by the knife, and even the most rapid cutting cycle produces sections of limited value. Many ion exchange resins swell in water; some undergo irreversible structural changes when dried. We developed our embedding procedure to handle this type of sample, but it should be applicable to many materials that present similar sectioning difficulties.The purpose of our embedding procedure is to build up a cross-linking network throughout the sample, while it is in a water swollen state. Our procedure was suggested to us by the work of Rosenberg, where he mentioned the formation of a tridimensional structure by the polymerization of the GMA biproduct, triglycol dimethacrylate.

A Transmission Electron Microscopical Investigation of Phase Transformations in TiNi

1980 ◽  
Vol 38 ◽  
pp. 340-341
Author(s):  
P. Moine ◽  
G. M. Michal ◽  
R. Sinclair
Keyword(s):  
Electron Microscopy ◽  
Phase Transformations ◽  
Applied Stress ◽  
Structural Changes ◽  
Microscopical Investigation ◽  
Temperature Range ◽  
Transmission Electron ◽  
Electron Microscopical ◽  
Diffraction Effects ◽  
Microscopy Images

Premartensitic effects in near equiatomic TiNi have been pointed out by several authors(1-5). These include anomalous contrast in electron microscopy images (mottling, striations, etc. ),diffraction effects(diffuse streaks, extra reflections, etc.), a resistivity peak above Ms (temperature at which a perceptible amount of martensite is formed without applied stress). However the structural changes occuring in this temperature range are not well understood. The purpose of this study is to clarify these phenomena.

scholarly journals Coupled Investigation of Contact Potential and Microstructure Evolution of Ultra-Thin AlOx for Crystalline Si Passivation

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1803
Author(s):  
Zhen Zheng ◽  
Junyang An ◽  
Ruiling Gong ◽  
Yuheng Zeng ◽  
Jichun Ye ◽  
...  
Keyword(s):  
Structural Changes ◽  
Silicon Oxide ◽  
Crystalline Silicon ◽  
Contact Potential Difference ◽  
Potential Difference ◽  
Kelvin Probe ◽  
Contact Potential ◽  
Carrier Lifetimes ◽  
Transmission Electron ◽  
Effective Carrier

In this work, we report the same trends for the contact potential difference measured by Kelvin probe force microscopy and the effective carrier lifetime on crystalline silicon (c-Si) wafers passivated by AlOx layers of different thicknesses and submitted to annealing under various conditions. The changes in contact potential difference values and in the effective carrier lifetimes of the wafers are discussed in view of structural changes of the c-Si/SiO2/AlOx interface thanks to high resolution transmission electron microscopy. Indeed, we observed the presence of a crystalline silicon oxide interfacial layer in as-deposited (200 °C) AlOx, and a phase transformation from crystalline to amorphous silicon oxide when they were annealed in vacuum at 300 °C.

Structural changes in titanium dioxide nanocrystals during plastic deformation

2005 ◽  
Vol 38 (5) ◽  
pp. 749-756 ◽  
Author(s):  
Ulrich Gesenhues
Keyword(s):  
Structural Changes ◽  
Crystal Size ◽  
Lower Layer ◽  
High Energy ◽  
Primary Crystal ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Hall Method ◽  
Means Of Transmission

The polygonization of 200 nm rutile crystals during dry ball-milling at 10gwas monitored in detail by means of transmission electron microscopy (TEM) and X-ray diffraction (XRD). The TEM results showed how to modify the Williamson–Hall method for a successful evaluation of crystal size and microstrain from XRD profiles. Macrostrain development was determined from the minute shift of the most intense reflection. In addition, changes in pycnometrical density were monitored. Accordingly, the primary crystal is disintegrated during milling into a mosaic of 12–35 nm pieces where the grain boundaries induce up to 1.2% microstrain in a lower layer of 6 nm thickness. Macrostrain in the interior of the crystals rises to 0.03%. The pycnometrical density, reflecting the packing density of atoms in the grain boundary, decreases steadily by 1.1%. The results bear relevance to our understanding of plastic flow and the mechanism of phase transitions of metal oxides during high-energy milling.

Template Induced Synthesis of Nano-Hydroxyapatite by Co-Precipitation Method

2011 ◽  
Vol 311-313 ◽  
pp. 1713-1716 ◽  
Author(s):  
Yan Rong Sun ◽  
Tao Fan ◽  
Chang An Wang ◽  
Li Guo Ma ◽  
Feng Liu
Keyword(s):  
Electron Microscope ◽  
Chondroitin Sulfate ◽  
Aspartic Acid ◽  
Transmission Electron Microscope ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Morphology ◽  
Transmission Electron ◽  
Co Precipitation

Nano-hydroxyapatite with different morphology was synthesized by the co-precipitation method coupled with biomineralization using Ca(NO3)2•4H2O and (NH4)2HPO4 as reagents, adding chondroitin sulfate, agarose and aspartic acid as template. The structure and morphology of the prepared powders were characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM).

scholarly journals Structural Evolution in Wet Mechanically Alloyed Co-Fe-(Ta,W)-B Alloys

Metals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 800
Author(s):  
Vladimír Girman ◽  
Maksym Lisnichuk ◽  
Daria Yudina ◽  
Miloš Matvija ◽  
Pavol Sovák ◽  
...  
Keyword(s):  
Structural Changes ◽  
Magnetic Measurements ◽  
Structural Evolution ◽  
High Energy ◽  
Control Agent ◽  
X Ray Diffraction ◽  
Mechanically Alloyed ◽  
X Ray ◽  
Transmission Electron ◽  
X Ray Absorption

In the present study, the effect of wet mechanical alloying (MA) on the glass-forming ability (GFA) of Co43Fe20X5.5B31.5 (X = Ta, W) alloys was studied. The structural evolution during MA was investigated using high-energy X-ray diffraction, X-ray absorption spectroscopy, high-resolution transmission electron microscopy and magnetic measurements. Pair distribution function and extended X-ray absorption fine structure spectroscopy were used to characterize local atomic structure at various stages of MA. Besides structural changes, the magnetic properties of both compositions were investigated employing a vibrating sample magnetometer and thermomagnetic measurements. It was shown that using hexane as a process control agent during wet MA resulted in the formation of fully amorphous Co-Fe-Ta-B powder material at a shorter milling time (100 h) as compared to dry MA. It has also been shown that substituting Ta with W effectively suppresses GFA. After 100 h of MA of Co-Fe-W-B mixture, a nanocomposite material consisting of amorphous and nanocrystalline bcc-W phase was synthesized.

Size dependent behavior of Fe3O4crystals during electrochemical (de)lithiation: an in situ X-ray diffraction, ex situ X-ray absorption spectroscopy, transmission electron microscopy and theoretical investigation

2017 ◽  
Vol 19 (31) ◽  
pp. 20867-20880 ◽  
Author(s):  
David C. Bock ◽  
Christopher J. Pelliccione ◽  
Wei Zhang ◽  
Janis Timoshenko ◽  
K. W. Knehr ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Structural Changes ◽  
Ex Situ ◽  
X Ray Diffraction ◽  
X Ray ◽  
Size Dependent ◽  
Transmission Electron ◽  
Dependent Behavior ◽  
X Ray Absorption

Crystal and atomic structural changes of Fe3O4upon electrochemical (de)lithiation were determined.

Shape Memory Characteristics and Superelasticity of Ti-Ni-Cu Alloy Ribbons with Nano Ti2Ni Particles

2008 ◽  
Vol 8 (2) ◽  
pp. 722-727 ◽  
Author(s):  
Tae-hyun Nam ◽  
Cheol-am Yu ◽  
Jung-min Nam ◽  
Hyun-gon Kim ◽  
Yeon-wook Kim
Keyword(s):  
Melt Spinning ◽  
Volume Fraction ◽  
Deformation Behaviour ◽  
Parent Phase ◽  
Tensile Tests ◽  
Constant Load ◽  
Cu Alloy ◽  
Transmission Electron ◽  
Average Size ◽  
Memory Characteristics

Microstructures and deformation behaviour of Ti-45Ni-5Cu and Ti-46Ni-5Cu alloy ribbons prepared by melt spinning were investigated by transmission electron microscopy, thermal cycling tests under constant load and tensile tests. Spherical Ti2Ni particles coherent with the B2 parent phase were observed in the alloy ribbons when the melt spinning temperature was higher than 1773 K. Average size of Ti2Ni particles in the ribbons obtained at 1873 K was 8 nm, which was smaller than that (10 nm) in the ribbons obtained at 1773 K. Volume fraction of Ti2Ni phase in the ribbons obtained at 1873 K was 40%, which was larger than that (20%) in the ribbons obtained at 1773 K. The stress required at temperatures of Af + 10 K for the stress-induced martensitic transformation increased from 93 MPa to 229 MPa and apparent elastic modulus of the B2 parent phase increased from 56 GPa to 250 GPa with increasing the melt spinning temperature from 1673 K to 1873 K in Ti-45Ni-5Cu alloy ribbons. The critical stress for slip deformation of the ribbons increased by coherent Ti2Ni particles, and thus residual elongation did not occur even at 160 MPa, while considerable plastic deformation occurred at 60 MPa in the ribbons without Ti2Ni particles. Almost perfect superelastic recovery was found in the ribbons with coherent Ti2Ni particles, while only partial superelastic recovery was observed in the ribbons without coherent Ti2Ni particles.

Mechanisms of Grain Growth in Free-Standing Nanograined Gold Thin Films

2005 ◽  
Vol 907 ◽  
Author(s):  
J. A. Gregg ◽  
K Hattar ◽  
C H Lei ◽  
I M Robertson
Keyword(s):  
Thin Films ◽  
Grain Growth ◽  
Structural Changes ◽  
Dislocation Slip ◽  
Free Standing ◽  
Transmission Electron ◽  
Enhanced Properties ◽  
Gold Thin Films ◽  
Annealing Experiments

AbstractRetention of the enhanced properties reported for nanograined metallic systems requires that the nanostructure be insensitive to temperature and deformation. In situ transmission electron microscopy annealing experiments were employed to investigate the structural changes associated with the formation of micron-sized grains in nanograined evaporated gold thin films. This abnormal grain growth occurs randomly throughout the film. Twinning but not dislocation slip occurs in the growing grains until the grain size is in the hundreds of nanometer range. The twins appear to hinder growth and for grain growth to continue the twins must either be annihilated or be able to grow with the grain concurrently.

Ultrastructures of Epibiotic Suctorian, Tokophrya huangmeiensis 

Zootaxa ◽  
2018 ◽  
Vol 4521 (1) ◽  
pp. 145
Author(s):  
URFA BIN TAHIR ◽  
DENG QIONG ◽  
WANG ZHE ◽  
LI SEN ◽  
LIU YANG ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Light Microscopy ◽  
Structural Changes ◽  
Small Subunit ◽  
Free Living ◽  
Transmission Electron ◽  
Small Subunit Ribosomal Dna ◽  
Ribosomal Dna Sequence ◽  
Freshwater Ciliates

Tokophrya species are either free-living or facultative ectosymbiotic suctorians associated with copepods, isopods, mysids, decapods and amphipods. Tokophrya huangmeiensis in particular is found to be epizoic with the redclaw crayfish Cherax quadricarinatus Von Martens, 1868, which has been observed as part of an ongoing investigation of freshwater ciliates biodiversity in Huanggang, Hubei, China (Tahir et al. 2017). This first study on T. huangmeiensis based on morphological features using light microscopy and small subunit ribosomal DNA sequence (Tahir et al. 2017), suggested that more detailed descriptions on the physiological and structural changes of this species should be done. Thus, in this study, we looked at the ultrastructures of T. huangmeiensis using electron microscopy, including both scanning (SEM) and transmission electron microscopy (TEM). 

Sign in / Sign up

Export Citation Format

Share Document