scholarly journals Currency paper from waste textile lint fibers: Nanofibrillated cellulose and combined system of starch-nanocellulose and polyacrylamide-nanocellulose substituting for long-fiber chemical pulp

BioResources ◽  
2020 ◽  
Vol 15 (4) ◽  
pp. 8601-8616
Author(s):  
Jafar Ebrahimpour Kasmani
Keyword(s):  
Tensile Strength ◽  
Textile Industry ◽  
Nanofibrillated Cellulose ◽  
Cationic Starch ◽  
Combined System ◽  
Paper Surface ◽  
Cationic Polyacrylamide ◽  
Chemical Pulp ◽  
Brightness Field ◽  
Scanning Electron

Nanofibrillated cellulose (NFC) and a combined systems of NFC with cationic starch or cationic polyacrylamide were used in place of long-fiber chemical pulp in manufacturing currency paper from waste lint fibers from the textile industry. Handmade papers (60 g) were produced from each treatment, and the physical, mechanical, and optical characteristics of papers were compared. The results showed that increasing amounts of NFC by itself increased tensile strength, resistance to bursting, tearing, porosity, and opacity, and decreased the resistance to folding and brightness. Increasing NFC in combination with cationic starch reduced the need for chemical pulp, while improving porosity, opacity, and brightness and increased tensile strength, bursting strength, resistance to tearing, and folding in comparison to the use of long-fiber pulp. Increasing NFC in combination with cationic polyacrylamide, compared to long-fiber chemical pulp, increased opacity, tensile strength, and resistance to bursting and decreased the porosity, resistance to tearing, folding, and brightness. Field emission-scanning electron microscopy results showed that an enhanced percentage of NFC reduced porosity so that addition of 5% cellulosic nanofiber made the paper surface smoother and pores were relatively filled.

scholarly journals Replacement of imported long fiber kraft pulp with lignocellulosic nanofibers and cationic materials in the production of durable paper

BioResources ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. 3662-3677
Author(s):  
Jafar Ebrahimpour Kasmani ◽  
Hassan Mohammadpour ◽  
Ahmad Samariha
Keyword(s):  
Tensile Strength ◽  
Kraft Pulp ◽  
Combined Treatment ◽  
Nanofibrillated Cellulose ◽  
Cationic Starch ◽  
Surface Smoothness ◽  
Cationic Polyacrylamide ◽  
Folding Endurance ◽  
Four Levels ◽  
Cationic Materials

Usage of cellulosic nanofibers, starch-nanocellulose, and polyacrylamide-nanocellulose hybrid systems were investigated for the replacement of imported long bleached kraft fibers in the production of durable papers. In this study, imported softwood kraft pulp was added to cotton pulp at four levels. Nanofibrillated cellulose (NFC) prepared from chemimechanical pulp was added to cotton pulp at a 5% level with optional 1% cationic starch or 0.1% cationic polyacrylamide. Comparative tests were done without NFC at three levels of either cationic starch or cationic polyacrylamide. For each condition, 80 gm-2 handsheets were made, and the physical, mechanical, and optical properties of the paper were compared. The results showed that increases of NFC yielded higher surface smoothness, tensile strength, resistance to bursting, tearing energy, folding endurance, yellowness, and opacity. It also reduced brightness and porosity whether added singly or in combination with cationic starch or polyacrylamide. Increasing cationic starch also increased surface smoothness, tensile strength, resistance to bursting, and folding endurance, but paper opacity was reduced. The field emission-scanning electron microscopy results showed that increased NFC reduced porosity, the paper surface became smoother, and the pores were relatively filled. Finally, the combined treatment of 5% NFC and 1% cationic starch is introduced as a suitable combination.

scholarly journals Analysis of PLA Composite Filaments Reinforced with Lignin and Polymerised-Lignin-Treated NFC

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2174
Author(s):  
Diana Gregor-Svetec ◽  
Mirjam Leskovšek ◽  
Blaž Leskovar ◽  
Urška Stanković Elesini ◽  
Urška Vrabič-Brodnjak
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Tensile Strength ◽  
Glassy State ◽  
Nanofibrillated Cellulose ◽  
Dynamic Mechanical Properties ◽  
Initial Modulus ◽  
Surface Modified ◽  
Scanning Electron

Polylactic acid (PLA) is one of the most suitable materials for 3D printing. Blending with nanoparticles improves some of its properties, broadening its application possibilities. The article presents a study of composite PLA matrix filaments with added unmodified and lignin/polymerised lignin surface-modified nanofibrillated cellulose (NFC). The influence of untreated and surface-modified NFC on morphological, mechanical, technological, infrared spectroscopic, and dynamic mechanical properties was evaluated for different groups of samples. As determined by the stereo and scanning electron microscopy, the unmodified and surface-modified NFCs with lignin and polymerised lignin were present in the form of plate-shaped agglomerates. The addition of NFC slightly reduced the filaments’ tensile strength, stretchability, and ability to absorb energy, while in contrast, the initial modulus slightly improved. By adding NFC to the PLA matrix, the bending storage modulus (E’) decreased slightly at lower temperatures, especially in the PLA samples with 3 wt% and 5 wt% NFC. When NFC was modified with lignin and polymerised lignin, an increase in E’ was noticed, especially in the glassy state.

Effects of montmorillonite nanoclay on the properties of chemimechanical pulping paper

BioResources ◽  
2021 ◽  
Vol 16 (3) ◽  
pp. 6281-6291
Author(s):  
Jafar Ebrahimpour Kasmani ◽  
Ahmad Samariha
Keyword(s):  
Tensile Strength ◽  
Morphological Properties ◽  
X Ray Diffraction ◽  
Cationic Starch ◽  
Burst Strength ◽  
X Ray ◽  
Air Resistance ◽  
Diffraction Patterns ◽  
Montmorillonite Nanoclay ◽  
Scanning Electron

The effects of nanoclay were studied relative to the physical, mechanical, optical, and morphological properties of chemimechanical pulping papers. Nanoclay was incorporated at 0%, 2%, 4%, 6%, 8%, or 10%. To increase the retention, 1% cationic starch was used in all test papers. Handsheets (60 g/m2 in weight) were tested to determine their physical, mechanical, optical, and morphological properties. Up to 2% nanoclay increased the tensile strength; at values greater than 2%, the tensile strength decreased. The addition of up to 4% nanoclay increased roughness; between 4% and 10% nanoclay, roughness decreased. With 10% nanoclay, the tear strength, burst strength, and brightness decreased, but the air resistance, opacity, and yellowness increased. Scanning electron microscopy showed that the nanoclay filled the pore spaces between fibers, thus increasing air resistance. X-ray diffraction patterns indicated an intercalated structure.

Wet-end addition of nanofibrillated cellulose pretreated with cationic starch to achieve paper strength with less refining and higher bulk

TAPPI Journal ◽  
2018 ◽  
Vol 17 (07) ◽  
pp. 395-403 ◽  
Author(s):  
Matthew Rice ◽  
Lokendra Pal ◽  
Ronalds Gonzalez ◽  
Martin Hubbe
Keyword(s):  
Apparent Density ◽  
Colloidal Silica ◽  
Nanofibrillated Cellulose ◽  
Dry Mass ◽  
High Mass ◽  
Paper Strength ◽  
Cationic Starch ◽  
Combined System ◽  
Bonding System ◽  
High Level

Nanofibrillated cellulose (NFC) treated with cationic starch was evaluated as a bonding system to permit lower degrees of refining and lower apparent density of high-mass handsheets made from bleached kraft pulp. Mixed pulp (70% hardwood, 30% softwood) was formed into sheets with the optional addition of 5% by dry mass of NFC. The default addition of NFC was compared with a system in which the NFC had been pretreated either with cationic starch (at various levels) or optionally followed by colloidal silica. Comparative tests also were carried out with separate addition of cationic starch to the main furnish. Unrefined fibers (514 mL CSF) were compared with low-refined (473 mL CSF) and high-refined (283 mL CSF) pulp mixtures. The NFC that had been pretreated with cationic starch at a high level was especially effective at boosting the tensile strength and stiffness of sheets prepared from pulp that had been refined at a low level, thus achieving improved strength at relatively low apparent density (high bulk) of the handsheets. The results support a strategy, for applicable grades of paper, of using cationic starchpretreated NFC in place of refining energy applied to the main fiber furnish. It was further established that colloidal silica can be employed as a further pretreatment of the cationic starch–treated NFC as a means of promoting dewatering in the combined system.

Enhancement of Mica Paper Insulation Strength with Surface Modification

2012 ◽  
Vol 187 ◽  
pp. 215-219 ◽  
Author(s):  
Xiao Wei Zhang ◽  
Shu Peng Liu ◽  
Yu Peng Qian ◽  
Ying Bo Zhu
Keyword(s):  
Tensile Strength ◽  
Surface Modification ◽  
Ethylene Diamine Tetraacetic Acid ◽  
Ethylene Diamine ◽  
Insulation Material ◽  
Tetraacetic Acid ◽  
High Tensile Strength ◽  
Cationic Starch ◽  
Cationic Polyacrylamide ◽  
Paper Insulation

Mica paper is made as one kind of insulation material, but low strength limits its applications. Surface modification is proved to be an effective way to enhance its strength. In this paper modifier like ethylene diamine tetraacetic acid, cationic polyacrylamide, cationic starch, ethylene diamine tetraacetic acid plus cationic polyacrylamide and ethylene diamine tetraacetic acid plus cationic starch are introduced to improve strengths of mica paper. Finally ethylene diamine tetraacetic acid plus cationic starch is chosen as modifier of mica flakes. After modification mica paper can reach high tensile strength of 19.84N/cm, which is more than six times high than mica paper without any modification.

scholarly journals Influence of biological origin on the tensile properties of cellulose nanopapers

Cellulose ◽  
2021 ◽  
Author(s):  
Katri S. Kontturi ◽  
Koon-Yang Lee ◽  
Mitchell P. Jones ◽  
William W. Sampson ◽  
Alexander Bismarck ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Cell Wall ◽  
Bacterial Cellulose ◽  
Raw Materials ◽  
Cellulose Nanofibers ◽  
Nanofibrillated Cellulose ◽  
Primary Cell Wall ◽  
Biological Origin ◽  
Basic Principles ◽  
Fiber Mats

Abstract Cellulose nanopapers provide diverse, strong and lightweight templates prepared entirely from sustainable raw materials, cellulose nanofibers (CNFs). Yet the strength of CNFs has not been fully capitalized in the resulting nanopapers and the relative influence of CNF strength, their bonding, and biological origin to nanopaper strength are unknown. Here, we show that basic principles from paper physics can be applied to CNF nanopapers to illuminate those relationships. Importantly, it appeared that ~ 200 MPa was the theoretical maximum for nanopapers with random fibril orientation. Furthermore, we demonstrate the contrast in tensile strength for nanopapers prepared from bacterial cellulose (BC) and wood-based nanofibrillated cellulose (NFC). Endemic amorphous polysaccharides (hemicelluloses) in NFC act as matrix in NFC nanopapers, strengthening the bonding between CNFs just like it improves the bonding between CNFs in the primary cell wall of plants. The conclusions apply to all composites containing non-woven fiber mats as reinforcement. Graphic abstract

scholarly journals Three-dimensional thermomechanical converting of CTMP substrates: effect of bio-based strengthening agents and new mineral filling concept

Cellulose ◽  
2021 ◽  
Vol 28 (15) ◽  
pp. 9751-9768
Author(s):  
Teija Laukala ◽  
Sami-Seppo Ovaska ◽  
Ninja Kerttula ◽  
Kaj Backfolk
Keyword(s):  
Tensile Strength ◽  
Elastic Modulus ◽  
Three Dimensional ◽  
Microfibrillated Cellulose ◽  
New Mineral ◽  
Thermomechanical Pulp ◽  
Cationic Starch ◽  
Precipitated Calcium Carbonate ◽  
Filling Method ◽  
Positive Effect

AbstractThe effects of bio-based strengthening agents and mineral filling procedure on the 3D elongation of chemi-thermomechanical pulp (CTMP) handsheets with and without mineral (PCC) filling have been investigated. The 3D elongation was measured using a press-forming machine equipped with a special converting tool. The strength of the handsheets was altered using either cationic starch or microfibrillated cellulose. Precipitated calcium carbonate (PCC) was added to the furnish either as a slurry or by precipitation of nano-sized PCC onto and into the CTMP fibre. The 3D elongation of unfilled sheets was increased by the dry-strengthening agents, but no evidence on the theorised positive effect of mineral fill on 3D elongation was seen in either filling method. The performance of the strengthening agent depended on whether the PCC was as slurry or as a precipitated PCC-CTMP. The starch was more effective with PCC-CTMP than when the PCC was added directly as a slurry to the furnish, whereas the opposite was observed with microfibrillated cellulose. The 3D elongation correlated positively with the tensile strength, bursting strength, tensile stiffness, elastic modulus and bending stiffness, even when the sheet composition was varied, but neither the strengthening agent nor the method of PCC addition affected the 3D elongation beyond what was expectable based on the tensile strength of the sheets. Finally, mechanisms affecting the properties that correlated with the 3D elongation are discussed.

The Preparation and Property Research on Laponite-Poly (L-Lactide) Composite Film

2013 ◽  
Vol 750-752 ◽  
pp. 1919-1923 ◽  
Author(s):  
Guo Xian Zhou ◽  
Ming Wei Yuan ◽  
Lin Jiang ◽  
Ming Long Yuan ◽  
Hong Li Li
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Tensile Strength ◽  
Composite Film ◽  
Composite Films ◽  
Complexing Agent ◽  
Solution Blending ◽  
Method Of Solution ◽  
Thermal Stability Of ◽  
Scanning Electron

The laponite-poly (L-lactide) composite films are prepared by the method of solution blending with polylactide (PLA) and laponite. The result shows that the homogeneous and smooth composite film is prepared with 1, 4-dioxane. Thermogravimetry analysis (TG) and tensile strength studies demonstrate that the thermal stability and tensile strength are improved with the laponite added. The scanning electron microscopy (SEM) measurement indicates that the pores of composite films get uniform and network structure is more and more compact with compared to pure PLA film. The present study reveals that the laponite as a complexing agent can improve the mechanical properties and thermal stability of PLA.

Study on Mechanical Properties of AA6351 Alloy Reinforced with Titanium Di-Boride (TiB2) Composite by In Situ Casting Method

2015 ◽  
Vol 787 ◽  
pp. 583-587 ◽  
Author(s):  
V. Mohanavel ◽  
K. Rajan ◽  
K.R. Senthil Kumar
Keyword(s):  
Tensile Strength ◽  
Aluminum Matrix ◽  
Aluminum Matrix Composites ◽  
Scanning Electron Micrographs ◽  
Matrix Composites ◽  
X Ray Diffraction ◽  
In Situ Reaction ◽  
Halide Salts ◽  
Scanning Electron

In the present study, an aluminum alloy AA6351 was reinforced with different percentages (1, 3 and 5 wt %) of TiB2 particles and they were successfully fabricated by in situ reaction of halide salts, potassium hexafluoro-titanate and potassium tetrafluoro-borate, with aluminium melt. Tensile strength, yield strength and hardness of the composite were investigated. In situ reaction between the inorganic salts K2TiF6 and KBF4 to molten aluminum leads to the formation of TiB2 particles. The prepared aluminum matrix composites were characterized using X-ray diffraction and scanning electron microscope. Scanning electron micrographs revealed a uniform dispersal of TiB2 particles in the aluminum matrix. The results obtained indicate that the hardness and tensile strength were increased with an increase in weight percentages of TiB2 contents.

Characterization and Utilization of Coconut Fibers of the Caribbean

2014 ◽  
Vol 1611 ◽  
pp. 95-104 ◽  
Author(s):  
Nadira Mathura ◽  
Duncan Cree ◽  
Ryan P. Mulligan
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Electron Micrographs ◽  
Saline Water ◽  
Gauge Length ◽  
Scanning Electron Micrographs ◽  
Coir Fiber ◽  
Coir Fibers ◽  
The Caribbean ◽  
Scanning Electron

ABSTRACTIn many tropical countries coconut (coir) fiber production is a major source of income for rural communities. The Caribbean has an abundance of coconuts but research into utilizing its by-products is limited. Environmentally friendly coir fibers are natural polymers generally discarded as waste material in this region. Research has shown that coir fiber from other parts of the world has successfully been recycled. This paper therefore investigates the mechanical properties of Caribbean coir fiber for potential applications in civil engineering.Approximately four hundred fibers were randomly taken from a coir fiber stack and subjected to retting in both distilled and saline water media. The mechanical properties of both the retted and unretted coir fibers were evaluated at weekly increments for a period of 3 months. Tensile strength test, x-ray diffraction analysis and scanning electron micrographs were used to assess trends and relationships between fiber gauge lengths, diameter, tensile strength and Young’s modulus. Diameters ranged between 0.11 mm-0.46 mm, while fiber samples were no longer than 250 mm in length. The tensile strength and strain at break decreased as the gauge length increased for both unretted and retted fibers. The opposite occurred for the relationship between the gauge length and Young’s modulus. Additionally, the tensile strength and modulus decreased as the fiber diameter increased. Neither distilled nor saline water improved the coir fiber’s crystalline index. Scanning electron micrographs qualitatively assessed fiber surfaces and captured necking and microfibril degradation at the fractured ends.The analysis revealed that the tensile strength, modulus, strain at break and crystallinity properties of the Caribbean coir fibers were comparable to commercially available coir fiber which are currently being used in many building applications.

Sign in / Sign up

Export Citation Format

Share Document