Toxicological Profiles of Nanomaterials

2005 ◽  
Vol 895 ◽  
Author(s):  
Erik K Rushton ◽  
Günter Oberdörster ◽  
Jacob Finkelstein

AbstractWith the passage of the National Nanoscale Initiative in 2001 there has been increasing attention and funding given to nanomaterial research. This has led to a number of new materials developed at the nanoscale (< 100 nm) level, which often possess chemical and physical properties distinct from those of their bulk materials. These unique qualities are proving to be quite useful in a number of new applications. For example, biological applications in imaging, treatment, and drug delivery are particularly promising as well as the increasing engineering potential of nanocircuitry and materials science. As the number of applications increases however, so too does the potential for human exposure to nanomaterials through a number of routes: dermal, ingestion, inhalation, and even injection. Interestingly some of the properties of these nanomaterials that make them useful in these emerging technologies are the same properties that can increase their toxic potential. This is leading to an emerging discipline – nanotoxicology, which can be defined as safety evaluation of engineered nanostructures and nanodevices. Nanotoxicology research will not only provide information for risk assessment of nanomaterials based on data for hazard identification, dose response relationships and biokinetics, but will also help to further advance the field of nanoresearch by providing information to alter undesirable nanomaterials properties. Although nanotoxicology is in its infancy, there are some preliminary studies with newly developed materials that provide some insight into potential effects, which when coupled with older studies provides some insight on how these nanomaterials impact the biological system. This presentation summarizes results of studies with nanosized particles with a focus on the respiratory system and skin as portals of entry. The ability of particles to translocate from their site of entry, their ability to elicit biological responses, and their presumed mechanisms of action will be highlighted. This will be an attempt to illustrate how pervasive these materials can be, which may or may not be detrimental. With proper toxicological assessment this potential may be harnessed leading to breakthroughs at the nanotechnology – biology interface.

2021 ◽  
Vol 1 (1) ◽  
Author(s):  
Peter J. Wellmann

AbstractThroughout human history, most further developments or new achievements were accompanied by new materials or new processes that enabled the technologic progress. With concrete devices and applications in mind, synthesis and subsequent treatment of materials naturally went along with the progress. The aim of the underlying article is to spot the role of optimization, of discovery, of trial-and-error approaches, of fundamentals and curiosity driven design and development. In a consecutive examination, five missions addressing the challenges facing our world (identified by the European Council) will be cross linked with seven topical areas from materials science defined by the European Materials Research Society. The scope of this examination is to identify approaches and methods to further develop and innovate materials which form the basis of the anticipated solutions.


Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 1001
Author(s):  
Rui Huang ◽  
David C. Luther ◽  
Xianzhi Zhang ◽  
Aarohi Gupta ◽  
Samantha A. Tufts ◽  
...  

Nanoparticles (NPs) provide multipurpose platforms for a wide range of biological applications. These applications are enabled through molecular design of surface coverages, modulating NP interactions with biosystems. In this review, we highlight approaches to functionalize nanoparticles with ”small” organic ligands (Mw < 1000), providing insight into how organic synthesis can be used to engineer NPs for nanobiology and nanomedicine.


Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1791
Author(s):  
Marco Vizcarra-Pacheco ◽  
María Ley-Flores ◽  
Ana Mizrahim Matrecitos-Burruel ◽  
Ricardo López-Esparza ◽  
Daniel Fernández-Quiroz ◽  
...  

One of the main challenges facing materials science today is the synthesis of new biodegradable and biocompatible materials capable of improving existing ones. This work focused on the synthesis of new biomaterials from the bioconjugation of oleic acid with L-cysteine using carbodiimide. The resulting reaction leads to amide bonds between the carboxylic acid of oleic acid and the primary amine of L-cysteine. The formation of the bioconjugate was corroborated by Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and nuclear magnetic resonance (NMR). In these techniques, the development of new materials with marked differences with the precursors was confirmed. Furthermore, NMR has elucidated a surfactant structure, with a hydrophilic part and a hydrophobic section. Ultraviolet-visible spectroscopy (UV-Vis) was used to determine the critical micellar concentration (CMC) of the bioconjugate. Subsequently, light diffraction (DLS) was used to analyze the size of the resulting self-assembled structures. Finally, transmission electron microscopy (TEM) was obtained, where the shape and size of the self-assembled structures were appreciated.


Author(s):  
D.V. Belikov ◽  
E.S. Shishkin

The article provides an overview of some promising areas of research and development in the field of materials science and nanotechnology and the main scientific results obtained by the teams of the leading scientific schools of Russia, which received grants from the President of the Russian Federation in 2021.


2021 ◽  
Vol 4 (03) ◽  
pp. 50-71
Author(s):  
Leonardo Dos Santos ◽  
Bernardo L. Rodrigues ◽  
Camila B. Pinto

The ongoing increase in the number of experimental charge-density studies can be related to both the technological advancements and the wide applicability of the method. Regarding materials science, the understanding of bonding features and their relation to the physical properties of materials can not only provide means to optimize such properties, but also to predict and design new materials with the desired ones. In this tutorial, we describe the steps for a charge-density analysis, emphasizing the most relevant features and briefly discussing the applications of the method.


2000 ◽  
Vol 644 ◽  
Author(s):  
Takao Kobayashi ◽  
Donald A. Shockey

AbstractAdvanced diagnostic instruments and analyses applied to failure surfaces and cross sections of bulk metallic glasses (BMGs) can provide insight into the deformation and failure of these materials and assist in prototyping new materials with improved failure resistance. Confocal- optics scanning laser microscopic analysis of conjugate fracture surface topographs suggests that the formation and stretching of ligaments are likely keys to the high impact toughness of Vitreloy.


1998 ◽  
Vol 4 (S2) ◽  
pp. 418-419
Author(s):  
J. Pawley ◽  
M. Blouke ◽  
J. Janesick

The laser confocal microscope (LCM) is now an established research tool in biology and materials science. In biological applications, it is usually employed to detect the location of fluorescent marker molecules and, under these conditions, detected signal levels from bright areas often represent <20 photons/pixel (assuming a standard 1.6 μs pixel time) while those from dark areas are likely to average <1 photon/pixel. Although this data rate limits the speed at which information can be derived from the specimen, saturation of the fluorophor, photobleaching of the dye, and phototoxicity often prevent it being increased by simply using more laser power. Over the past 10 years, the optical photon efficiency of commercial confocal instruments has improved significantly and it is now reaching the point where further improvement is becoming very expensive. The only component is which a significant improvement is still possible is the photodetector.


Nanomaterials ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 1016 ◽  
Author(s):  
Jaehee Jang ◽  
Youngjun Kim ◽  
Jangsun Hwang ◽  
Yonghyun Choi ◽  
Masayoshi Tanaka ◽  
...  

Nanodiamonds are emerging as new nanoscale materials because of their chemical stability, excellent crystallinity, and unique optical properties. In this study, the structure of nanodiamonds was engineered to produce carbon nano-onion particles (CNOs) with multiple layers. Following a series of physicochemical characterizations of the CNOs, various evaluations for biological responses were conducted for potential biotechnological applications of the CNOs. The possibility of biological applications was first confirmed by assessment of toxicity to animal cells, evaluation of hemolysis reactions, and evaluation of reactive oxygen species. In addition, human immune cells were evaluated for any possible induction of an immune response by CNOs. Finally, the toxicity of CNOs to Escherichia coli present in the human colon was evaluated. CNOs have the chemical and physical properties to be a unique variety of carbon nanomaterials, and their toxicity to animal and human cells is sufficiently low that their biotechnological applications in the future are expected.


Sign in / Sign up

Export Citation Format

Share Document