Microscopic studies of fast phase transformations in GeSbTe films

2001 ◽  
Vol 674 ◽  
Author(s):  
Ralf Detemple ◽  
Inés Friedrich ◽  
Walter Njoroge ◽  
Ingo Thomas ◽  
Volker Weidenhof ◽  
...  
Keyword(s):  
Phase Transformation ◽  
Data Transfer ◽  
Optical Measurements ◽  
Transfer Rates ◽  
Force Microscopy ◽  
High Data ◽  
Atomic Force ◽  
Transmission Electron ◽  
Future Success ◽  
Microscopic Studies

ABSTRACTVital requirements for the future success of phase change media are high data transfer rates, i.e. fast processes to read, write and erase bits of information. The understanding and optimization of fast transformations is a considerable challenge since the processes only occur on a submicrometer length scale in actual bits. Hence both high temporal and spatial resolution is needed to unravel the essential details of the phase transformation. We employ a combination of fast optical measurements with microscopic analyses using atomic force microscopy (AFM) and transmission electron microscopy (TEM). The AFM measurements exploit the fact that the phase transformation from amorphous to crystalline is accompanied by a 6% volume reduction. This enables a measurement of the vertical and lateral speed of the phase transformation. Several examples will be presented showing the information gained by this combination of techniques.

Scanning tunneling microscopy and atomic force microscopy: New tools for biology

1989 ◽  
Vol 47 ◽  
pp. 778-779
Author(s):  
CE Bracker ◽  
P. K. Hansma
Keyword(s):  
Physical Property ◽  
Scanning Probe ◽  
Scanning Tunneling ◽  
Small Scale ◽  
Tunneling Microscopy ◽  
Force Microscopy ◽  
New Family ◽  
Small Probe ◽  
Atomic Force ◽  
Transmission Electron

A new family of scanning probe microscopes has emerged that is opening new horizons for investigating the fine structure of matter. The earliest and best known of these instruments is the scanning tunneling microscope (STM). First published in 1982, the STM earned the 1986 Nobel Prize in Physics for two of its inventors, G. Binnig and H. Rohrer. They shared the prize with E. Ruska for his work that had led to the development of the transmission electron microscope half a century earlier. It seems appropriate that the award embodied this particular blend of the old and the new because it demonstrated to the world a long overdue respect for the enormous contributions electron microscopy has made to the understanding of matter, and at the same time it signalled the dawn of a new age in microscopy. What we are seeing is a revolution in microscopy and a redefinition of the concept of a microscope.Several kinds of scanning probe microscopes now exist, and the number is increasing. What they share in common is a small probe that is scanned over the surface of a specimen and measures a physical property on a very small scale, at or near the surface. Scanning probes can measure temperature, magnetic fields, tunneling currents, voltage, force, and ion currents, among others.

The Electrical Characterization and Physical Failure Analysis for Transistor Gate Leakage

2006 ◽  
Author(s):  
Tsung-Te Li ◽  
Chao-Chi Wu ◽  
Jung-Hsiang Chuang ◽  
Jon C. Lee
Keyword(s):  
Failure Analysis ◽  
Electrical Characterization ◽  
Physical Analysis ◽  
Gate Leakage ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Voltage Stress ◽  
Leakage Site

Abstract This article describes the electrical and physical analysis of gate leakage in nanometer transistors using conducting atomic force microscopy (C-AFM), nano-probing, transmission electron microscopy (TEM), and chemical decoration on simulated overstressed devices. A failure analysis case study involving a soft single bit failure is detailed. Following the nano-probing analysis, TEM cross sectioning of this failing device was performed. A voltage bias was applied to exaggerate the gate leakage site. Following this deliberate voltage overstress, a solution of boiling 10%wt KOH was used to etch decorate the gate leakage site followed by SEM inspection. Different transistor leakage behaviors can be identified with nano-probing measurements and then compared with simulation data for increased confidence in the failure analysis result. Nano-probing can be used to apply voltage stress on a transistor or a leakage path to worsen the weak point and then observe the leakage site easier.

Structural and Optical Properties of InAsSbBi Grown by Molecular Beam Epitaxy on Offcut GaSb Substrates

Photonics ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 215
Author(s):  
Rajeev R. Kosireddy ◽  
Stephen T. Schaefer ◽  
Marko S. Milosavljevic ◽  
Shane R. Johnson
Keyword(s):  
Molecular Beam Epitaxy ◽  
Molecular Beam ◽  
Optical Quality ◽  
X Ray Diffraction ◽  
Interface Quality ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Lateral Variations

Three InAsSbBi samples are grown by molecular beam epitaxy at 400 °C on GaSb substrates with three different offcuts: (100) on-axis, (100) offcut 1° toward [011], and (100) offcut 4° toward [011]. The samples are investigated using X-ray diffraction, Nomarski optical microscopy, atomic force microscopy, transmission electron microscopy, and photoluminescence spectroscopy. The InAsSbBi layers are 210 nm thick, coherently strained, and show no observable defects. The substrate offcut is not observed to influence the structural and interface quality of the samples. Each sample exhibits small lateral variations in the Bi mole fraction, with the largest variation observed in the on-axis growth. Bismuth rich surface droplet features are observed on all samples. The surface droplets are isotropic on the on-axis sample and elongated along the [011¯] step edges on the 1° and 4° offcut samples. No significant change in optical quality with offcut angle is observed.

Defect-Engineered Graded GexSi1-x Buffers on Si (001) with Extreme Low Threading Dislocation Density

1995 ◽  
Vol 378 ◽  
Author(s):  
G. Kissinger ◽  
T. Morgenstern ◽  
G. Morgenstern ◽  
H. B. Erzgräber ◽  
H. Richter
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Atomic Force Microscopy ◽  
Dislocation Density ◽  
Threading Dislocation ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Dislocation Densities ◽  
Threading Dislocation Density

AbstractStepwise equilibrated graded GexSii-x (x≤0.2) buffers with threading dislocation densities between 102 and 103 cm−2 on the whole area of 4 inch silicon wafers were grown and studied by transmission electron microscopy, defect etching, atomic force microscopy and photoluminescence spectroscopy.

Effectiveness and Reliability of Metal Diffusion Barriers for Copper Interconnects

1995 ◽  
Vol 403 ◽  
Author(s):  
G. Bai ◽  
S. Wittenbrock ◽  
V. Ochoa ◽  
R. Villasol ◽  
C. Chiang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Vapor Deposition ◽  
Physical Vapor Deposition ◽  
Chemical Vapor ◽  
Diffusion Barriers ◽  
Copper Interconnects ◽  
Time To Failure ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron

AbstractCu has two advantages over Al for sub-quarter micron interconnect application: (1) higher conductivity and (2) improved electromigration reliability. However, Cu diffuses quickly in SiO2and Si, and must be encapsulated. Polycrystalline films of Physical Vapor Deposition (PVD) Ta, W, Mo, TiN, and Metal-Organo Chemical Vapor Deposition (MOCVD) TiN and Ti-Si-N have been evaluated as Cu diffusion barriers using electrically biased-thermal-stressing tests. Barrier effectiveness of these thin films were correlated with their physical properties from Atomic Force Microscopy (AFM), Transmission Electron Microscopy (TEM), Secondary Electron Microscopy (SEM), and Auger Electron Spectroscopy (AES) analysis. The barrier failure is dominated by “micro-defects” in the barrier film that serve as easy pathways for Cu diffusion. An ideal barrier system should be free of such micro-defects (e.g., amorphous Ti-Si-N and annealed Ta). The median-time-to-failure (MTTF) of a Ta barrier (30 nm) has been measured at different bias electrical fields and stressing temperatures, and the extrapolated MTTF of such a barrier is > 100 year at an operating condition of 200C and 0.1 MV/cm.

Preparation and Property Study of Core-Shell Ambient-Temperature Crosslinkable Polyacrylate Binder

2013 ◽  
Vol 469 ◽  
pp. 3-6 ◽  
Author(s):  
Mu Li ◽  
Xiao Song Lin ◽  
Xiao Yu Li ◽  
Hai Qiao Wang
Keyword(s):  
Ambient Temperature ◽  
Butyl Acrylate ◽  
Core Shell ◽  
Drying Time ◽  
Acrylic Polymer ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Film Forming ◽  
Water Based

As the binder of waterborne inks, the capability of acrylic polymer has great influences on the quality of inks. In this contribution, structured latex particles with a poly (stryrene-butyl acrylate-methacrylate) core and a poly (butyl acrylate-methyl methacrylate-methacrylic acid-diacetone acrylamide (DAAM)) shell, which can be used as binders of water-based ink, were prepared by emulsion polymerization. The emulsion can cure in the course of film forming at ambient temperature through the reaction between DAAM and the adipic acid dihydrazide (ADH). Fourier transform infrared spectroscopy (FTIR), differential scanning calorimeter (DSC), transmission electron microscopy (TEM), atomic force microscopy (AFM) were used to characterize the structures and study the properties of the latices. The drying time of the crosslinking latices was investigated. In addition, influences of DAAM monomer dosage and the mole ratio of DAAM to ADH on the mechanical properties of self-crosslinkable core-shell latices were also discussed. It was found that the core-shell crosslinkable particles with a low glass transition temperature (Tg) core and a high Tg shell have better film properties and would be more applicable to binders of water-based ink for plastic film, in comparison with those particles with a high Tg core and a low Tg shell.

Development of Ge Nanoparticles Embedded in GeO2 Matrix

2008 ◽  
Vol 8 (8) ◽  
pp. 4081-4085 ◽  
Author(s):  
Y. Batra ◽  
D. Kabiraj ◽  
D. Kanjilal
Keyword(s):  
Electron Microscopy ◽  
Annealing Temperature ◽  
Spectroscopic Studies ◽  
Electron Beam Evaporation ◽  
Granular Structure ◽  
Raman Analysis ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Ge Nanocrystals

Germanium (Ge) nanoparticles have attracted a lot of attention due to their excellent optical properties. In this paper, we report on the formation of Ge nanoparticles embedded in GeO2 matrix prepared by electron beam evaporation and subsequent annealing. Transmission electron microscopy (TEM) studies clearly indicate the formation of Ge nanocrystals in the films annealed at 500 °C. Fourier transform infrared (FTIR) spectroscopic studies are carried out to verify the evolution of the structure after annealingat each stage. Micro-Raman analysis also confirms the formation of Ge nanoparticles in the annealed films. Development of Ge nanoparticles is also established by photoluminescence (PL) analysis. Surface morphology study is carried out by atomic force microscopy (AFM). It shows the evolution of granular structure of the films with increasing annealing temperature.

Sign in / Sign up

Export Citation Format

Share Document