scholarly journals Initial Properties Identification of Refined- and Semi Refined-Carrageenans as Raw Materials for Biodegradable Plastic Production

2021 ◽  
Vol 16 (2) ◽  
pp. 57-64
Author(s):  
Bakti Berlyanto Sedayu ◽  
Putri Wullandari ◽  
Arif Rahman Hakim ◽  
Dina Fransiska
Keyword(s):  
Melting Temperature ◽  
Raw Materials ◽  
Plastic Film ◽  
X Ray Diffraction ◽  
Rigid Plastic ◽  
Biodegradable Film ◽  
Crystallinity Degree ◽  
Flexible Film ◽  
Basic Parameters ◽  
Clear Plastic

Powdered refined- and semi-refined carrageenans (RC and SRC) have been characterized as alternative raw materials for industrial bioplastic production. Several basic parameters, i.e., the melting temperature, crystallinity, chemical structure (FTIR), and tensile properties, were observed. The melting temperature of RC was slightly higher than that of SRC, i.e., 176 °C and 172 °C, respectively. These temperatures were corresponded to their crystallinity degree (performed by X-ray diffraction). Nonetheless, the SRC demonstrated an overall higher thermal stability during heating. RC produced a clear transparent film. Meanwhile, SRC was yellowish and less transparent. The overall mechanical properties showed that RC produced more flexible film than SRC. However, both materials showed relatively equal tensile strength. In general, RC and SRC could be potentially used for biodegradable film production with different applications. RC was suitable for a flexible and clear plastic film, whereas SRC was suitable for rigid plastic film applications.

Preparation and Properties of Chitosan-Tranexamic Acid Salts

2019 ◽  
Vol 943 ◽  
pp. 129-134 ◽  
Author(s):  
Zhang Hu ◽  
Ya Qi Qin ◽  
Si Tong Lu ◽  
Chu Ru Huang ◽  
Ze Kun Chen
Keyword(s):  
Tranexamic Acid ◽  
Water Solubility ◽  
Raw Materials ◽  
Test Tube ◽  
X Ray Diffraction ◽  
Crystallinity Degree ◽  
Protonation Reaction ◽  
Coagulant Activity ◽  
Acid Salts

The solid chitosan-tranexamic acid salts were successfully prepared by the method of half-wet grinding with chitosan and tranexamic acid as raw materials. The physical properties including water solubility and stability of the prepared samples were tested, and their structures were characterized by Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD). In addition, the in vitro pro-coagulant activity was evaluated by the test tube method. The results showed that the prepared chitosan-tranexamic acid salts could be dissolved in weak acidic, neutral and weak alkaline aqueous solutions, expanding the dissolution range. The characterization results indicated that the protonation reaction of the chitosan amino group was achieved without solvent and the crystallinity degree of chitosan-tranexamic acid salts decreased by comparison with chitosan. The hemostasis evaluation showed that chitosan-tranexamic acid salts with different mass ratios had pro-coagulant activities in vitro. In particular, the clotting time of chitosan acid salt with mass ratio of 1:2 was shorter than that of Yunnan Baiyao. This effort laid the foundation for the development of the promising chitosan-based hemostatic materials.

scholarly journals Waste and Solar Energy: An Eco-Friendly Way for Glass Melting

2021 ◽  
Vol 5 (2) ◽  
pp. 16
Author(s):  
Isabel Padilla ◽  
Maximina Romero ◽  
José I. Robla ◽  
Aurora López-Delgado
Keyword(s):  
Solar Energy ◽  
Environmental Sustainability ◽  
Raw Materials ◽  
Glass Melting ◽  
Glass Network ◽  
X Ray Diffraction ◽  
X Ray ◽  
Concentrated Solar Energy ◽  
Calcium Source ◽  
The Aluminum Industry

In this work, concentrated solar energy (CSE) was applied to an energy-intensive process such as the vitrification of waste with the aim of manufacturing glasses. Different types of waste were used as raw materials: a hazardous waste from the aluminum industry as aluminum source; two residues from the food industry (eggshell and mussel shell) and dolomite ore as calcium source; quartz sand was also employed as glass network former. The use of CSE allowed obtaining glasses in the SiO2-Al2O3-CaO system at exposure time as short as 15 min. The raw materials, their mixtures, and the resulting glasses were characterized by means of X-ray fluorescence, X-ray diffraction, and differential thermal analysis. The feasibility of combining a renewable energy, as solar energy and different waste for the manufacture of glasses, would highly contribute to circular economy and environmental sustainability.

scholarly journals Polyurethane Composite Foams Synthesized Using Bio-Polyols and Cellulose Filler

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3474
Author(s):  
Katarzyna Uram ◽  
Milena Leszczyńska ◽  
Aleksander Prociak ◽  
Anna Czajka ◽  
Michał Gloc ◽  
...  
Keyword(s):  
Cross Sections ◽  
Raw Materials ◽  
Polyurethane Foams ◽  
Degree Of Crystallinity ◽  
X Ray Diffraction ◽  
Polyurethane Composite ◽  
Composite Foams ◽  
Closed Cell ◽  
Ft Ir ◽  
The Fourier Transform

Rigid polyurethane foams were obtained using two types of renewable raw materials: bio-polyols and a cellulose filler (ARBOCEL® P 4000 X, JRS Rettenmaier, Rosenberg, Germany). A polyurethane system containing 40 wt.% of rapeseed oil-based polyols was modified with the cellulose filler in amounts of 1, 2, and 3 php (per hundred polyols). The cellulose was incorporated into the polyol premix as filler dispersion in a petrochemical polyol made using calenders. The cellulose filler was examined in terms of the degree of crystallinity using the powder X-ray diffraction PXRD -and the presence of bonds by means of the fourier transform infrared spectroscopy FT-IR. It was found that the addition of the cellulose filler increased the number of cells in the foams in both cross-sections—parallel and perpendicular to the direction of the foam growth—while reducing the sizes of those cells. Additionally, the foams had closed cell contents of more than 90% and initial thermal conductivity coefficients of 24.8 mW/m∙K. The insulation materials were dimensionally stable, especially at temperatures close to 0 °C, which qualifies them for use as insulation at low temperatures.

scholarly journals Mining Wastes of an Albite Deposit as Raw Materials for Vitrified Mullite Ceramics

Minerals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 232
Author(s):  
Pedro J. Sánchez-Soto ◽  
Eduardo Garzón ◽  
Luis Pérez-Villarejo ◽  
George N. Angelopoulos ◽  
Dolores Eliche-Quesada
Keyword(s):  
Particle Size ◽  
Raw Materials ◽  
Phase Evolution ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Mining Wastes ◽  
X Ray Diffraction ◽  
X Ray ◽  
Maximum Value

In this work, an examination of mining wastes of an albite deposit in south Spain was carried out using X-ray Fluorescence (XRF), X-ray diffraction (XRD), particle size analysis, thermo-dilatometry and Differential Thermal Analysis (DTA) and Thermogravimetric (TG) analysis, followed by the determination of the main ceramic properties. The albite content in two selected samples was high (65–40 wt. %), accompanied by quartz (25–40 wt. %) and other minor minerals identified by XRD, mainly kaolinite, in agreement with the high content of silica and alumina determined by XRF. The content of Na2O was in the range 5.44–3.09 wt. %, being associated with albite. The iron content was very low (<0.75 wt. %). The kaolinite content in the waste was estimated from ~8 to 32 wt. %. The particle size analysis indicated values of 11–31 wt. % of particles <63 µm. The ceramic properties of fired samples (1000–1350 °C) showed progressive shrinkage by the thermal effect, with water absorption and open porosity almost at zero at 1200–1250 °C. At 1200 °C, the bulk density reached a maximum value of 2.38 g/cm3. An abrupt change in the phase evolution by XRD was found from 1150 to 1200 °C, with the disappearance of albite by melting in accordance with the predictions of the phase diagram SiO2-Al2O3-Na2O and the system albite-quartz. These fired materials contained as main crystalline phases quartz and mullite. Quartz was present in the raw samples and mullite was formed by decomposition of kaolinite. The observation of mullite forming needle-shape crystals was revealed by Scanning Electron Microscopy (SEM). The formation of fully densified and vitrified mullite materials by firing treatments was demonstrated.

Facile Solid State Method Route Synthesis and Enhance Visible Light Activities of BiVO4 by Doping Co

2016 ◽  
Vol 703 ◽  
pp. 316-320
Author(s):  
Hai Feng Chen ◽  
Jing Ling Hu ◽  
Bing Xu
Keyword(s):  
Solid State ◽  
Visible Light ◽  
Catalytic Effect ◽  
Catalytic Properties ◽  
Raw Materials ◽  
X Ray Diffraction ◽  
Solid State Method ◽  
Illumination Time ◽  
X Ray ◽  
State Method

Using NH4VO3, Bi (NO3)3•5H2O and Co (NO3)2•6H2O as raw materials, Co doped BiVO4 (Co/BiVO4) photocatalysts were successfully prepared by solid state method. And the photo catalytic properties were test in this work. Crystal structures of these samples were characterized by X-ray diffraction (XRD). The Methyl Orange (MO) was simulated as the sewage under the visible light to explorer the influence of the illumination time and the mass of photocatalyst. The visible-light absorption spectrum of BiVO4 was broadening with doping Co. It was found that the Co/BiVO4 had higher photocatalytic activity than pure BiVO4 .The reason of enhanced catalytic effect also had been analyzed and discussed in the article.

scholarly journals Preparation of composite coagulant of PFM-PDMDAAC and its coagulation performance in treatment of landfill leachate

2015 ◽  
Vol 5 (2) ◽  
pp. 177-188 ◽  
Author(s):  
Simin Li ◽  
Yongkang Lv ◽  
Zhanmeng Liu
Keyword(s):  
Landfill Leachate ◽  
Raw Materials ◽  
Oxygen Demand ◽  
X Ray Diffraction ◽  
Mechanical Mixing ◽  
Coagulation Performance ◽  
Coagulation Mechanism ◽  
As Adsorption ◽  
Co Precipitation ◽  
Composite Coagulant

A novel inorganic–organic composite coagulant, poly-ferric-magnesium (PFM) polydimethyldiallylammonium chloride (PDMDAAC), was prepared using FeSO4, MgSO4 and PDMDAAC as raw materials and was introduced to treat landfill leachate. The coagulation performance of the new reagent was evaluated and compared with those of other coagulants. The new reagent was characterized in terms of the analysis of ferron-timed spectroscopy, X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The coagulation mechanism was investigated by measuring the ζ-potential reduction and chemical oxygen demand removal at different dosages. Coagulation experiments revealed that the new reagent exhibited better coagulation performance compared with the simple PFM and the PFM + PDMDAAC. Ferron-timed spectroscopy showed that the new reagent exhibited increased effective polymer species concentration. XRD and FTIR spectroscopy showed that the new reagent was not a simple mechanical mixing of PFM and PDMDAAC, but a composite system with inorganic–organic complex interpenetration networks. The predominant coagulation mechanism of the new reagent was charge neutralization at low dosages, as well as adsorption bridging and co-precipitation netting at high dosages, when treating landfill leachate.

Study on Modified Rapeseed Oil/Montmorillonite Nanocomposites

2010 ◽  
Vol 123-125 ◽  
pp. 1291-1294 ◽  
Author(s):  
Bin Lü ◽  
Jian Zhong Ma ◽  
Dang Ge Gao ◽  
Lei Hong
Keyword(s):  
Rapeseed Oil ◽  
Fourier Transforms ◽  
Raw Materials ◽  
Infrared Spectrometry ◽  
Emulsifying Properties ◽  
X Ray Diffraction ◽  
Layer Spacing ◽  
Transmission Electron ◽  
Ft Ir ◽  
Better Than

Modified rapeseed oil(MRO) was prepared by using rapeseed oil, ethylene diamine and acrylic acid as the raw materials. Modified rapeseed oil/montmorillonite(MRO/MMT) nanocomposite was prepared by using modified rapeseed oil and montmorillonite. The emulsifying properties of MRO and MRO/MMT were determined respectively. Fourier transforms infrared spectrometry (FT-IR) and Transmission Electron microscope (TEM) results showed that MRO/MMT was prepared successfully. X-ray diffraction (XRD) results showed that modified rapeseed oil could smoothly enter the interlayer of montmorillonite, and modified the montmorillonite; with an increase in the amount of montmorillonite, the layer spacing of montmorillonite in the MRO/MMT lower after the first increase. The results of emulsifying properties indicated that emulsifying properties of MRO/MMT was better than MRO.

The Roman Ceramics of Salobrena (Granada-Spain) and their Raw Materials

1992 ◽  
Vol 267 ◽  
Author(s):  
Ana M De Andres ◽  
Isabel MuÑOZ
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Raw Materials ◽  
Third Century ◽  
Western Coast ◽  
X Ray Diffraction ◽  
X Ray ◽  
The Third ◽  
Good Number ◽  
Scanning Electron

ABSTRACTNineteen roman ceramic sherds found near Salobreña (Granada, Spain), in the western coast of the Mediterranean Sea, as well as different ceramic clays from the surroundingsare studied. Both clays and ceramic sherds are characterizad by X-ray diffraction and spectrometry, differential thermal analysis, and scanning electron and optical microscopies. A good number of the ceramic pieces, among which some “Terrae Sigillatae”, have a composition similar to that of the local clays and, thus, have been probably manufactured at Salobreña. Only a few of them have a foreign origin. For most of them, the firing temperature was about 800-850 °C, although some have been produced at 900-1000 °C, and some others at 1000-1100 °C. It is concluded that Salobreña appearsto have been an important settlement just in the third century of the Christian era.

Magnetic Properties of Bulk Zn0.95-XMnXFe0.05O2 Prepared by Sol-Gel Method and Subsequent Hot Pressing

2011 ◽  
Vol 268-270 ◽  
pp. 356-359 ◽  
Author(s):  
Wen Song Lin ◽  
C. H. Wen ◽  
Liang He
Keyword(s):  
Magnetic Properties ◽  
Photoelectron Spectroscopy ◽  
Raw Materials ◽  
Sol Gel ◽  
Secondary Phase ◽  
X Ray Diffraction ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Doped Zno

Mn, Fe doped ZnO powders (Zn0.95-xMnxFe0.05O2, x≤0.05) were synthesized by an ameliorated sol-gel method, using Zn(CH3COO)2, Mn(CH3COO)2and FeCl2as the raw materials, with the addition of vitamin C as a kind of chemical reducer. The resulting powder was subsequently compacted under pressure of 10 MPa at the temperature of 873K in vacuum. The crystal structure and magnetic properties of Zn0.95-xMnxFe0.05O2powder and bulk samples have been investigated by X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). X-ray photoelectron spectroscopy (XPS) was used to study chemical valence of manganese, iron and zinc in the samples. The x-ray diffraction (XRD) results showed that Zn0.95-xMnxFe0.05O (x≤0.05) samples were single phase with the ZnO-like wurtzite structure. No secondary phase was found in the XRD spectrum. X-ray photoelectron spectroscopy (XPS) showed that Fe and Mn existed in Zn0.95-xMnxFe0.05O2samples in Fe2+and Mn2+states. The results of VSM experiment proved the room temperature ferromagnetic properties (RTFP) of Mn, Fe co-doped ZnO samples.

scholarly journals Physicochemical Properties of Handere Clays and Their Use as a Building Material

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Yasin Erdoğan
Keyword(s):  
Physicochemical Properties ◽  
Building Materials ◽  
Raw Materials ◽  
Organic Matter Content ◽  
Volcanic Glass ◽  
Mineralogical Composition ◽  
Matter Content ◽  
Loss On Ignition ◽  
X Ray Diffraction ◽  
Clay Deposits

Handere clay deposits were discovered at Adana in Turkey. These clay units primarily consist of uncoloured claystone, pebbly sandstone, sandstone, siltstone, and mudstone marl and include gypsum lenses and clay levels of various thicknesses in places. The physicochemical properties of these clays have been investigated by different techniques including Scanning Electron and Elemental Analysis (SEM and EDS), mineralogical analyses, chemical and physical analyses, X-ray diffraction (XRD), thermogravimetric differential thermal analysis (TG-DTA), and Atterberg (Consistency) Limits Test. The mineralogical composition deduced from XRD is wide (smectite + palygorskite + illite ± feldspar ± chlorite ± quartz ± calcite ± serpentine) due to the high smectite contents (≈85%). SEM studies reveal that smectite minerals are composed of irregular platy leaves and show honeycomb pattern in the form of wavy leaves in places. The leaves presenting an array with surface edge contact are usually concentrated in the dissolution voids and fractures of volcanic glass. Organic matter content and loss on ignition analysis of raw materials are good for all the studied samples. In summary, Handere clays can be used as building materials in bricks, roof tiles, and cement and as a binder.

Sign in / Sign up

Export Citation Format

Share Document