scholarly journals Substantiation of the presence and parameters of seed guides in the openers, which increase the quality of sowing and yield

2021 ◽  
Vol 4 (1(112)) ◽  
pp. 61-75
Author(s):  
Alexander Nanka ◽  
Ivan Morozov ◽  
Vladimir Morozov ◽  
Mykola Krekot ◽  
Anatolii Poliakov ◽  
...  
Keyword(s):  
Coefficient Of Variation ◽  
Experimental Studies ◽  
Arithmetic Mean ◽  
Reference Plane ◽  
Grain Flow ◽  
Seed Distribution ◽  
Favorable Conditions ◽  
Inclined Surface ◽  
Analytical Expressions

One of the promising methods for improving the uniformity of seed distribution in the soil is the control of the grain flow by guiding elements in the openers. This creates favorable conditions for the flight of seeds in the openers and when leaving them backwards, which equalizes the speed, in modulus, of seeds and the unit, improves the uniformity of their distribution in the soil. The presence and parameters of the guiding elements of the openers was theoretically substantiated, which gave the development of the process of controlling the grain flow in the openers and at the exit from them by using the guiding elements. Analytical expressions have been obtained to determine the characteristics of the movement of particles on various surfaces, which are recommended to be used for guides in the openers. Experimental studies have shown that openers with guides reduce the coefficient of variation along the row by 20 ... 45% and have it 88 ... 98%, and in depth - 24 ... 27%. On the basis of experiments, it is recommended that 3 ... 4 guides are recommended for front openers (arithmetic mean interval along the row 18.5 ... 23.5 mm, coefficient of variation 88 ... 98%). The advantage of the experimental opener in the distribution of seeds by depth is due to the use of guide elements in combination with an improved soil shedding process. This eliminated the technological drawback - the formation of a sub-opener inclined surface (arithmetic mean interval 42 ... 37 mm, coefficient of variation 24 ... 27%). For a double disc opener, an improved guide is recommended, the bottom edge of which protrudes 2 cm in front of the vertical diameter of the discs and is located at a distance of 9 cm from the reference plane. The arithmetic mean spacing along the row of this opener is 15 mm, the coefficient of variation is 106%.

scholarly journals Sowing Quality Indicators for a Seed Drill With Overpressure

2014 ◽  
Vol 62 (6) ◽  
pp. 1487-1492 ◽  
Author(s):  
Jan Turan ◽  
Vladimir Višacki ◽  
Sanja Mehandžić ◽  
Pavol Findura ◽  
Patrik Burg ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Coefficient Of Variation ◽  
Arithmetic Mean ◽  
Sowing Depth ◽  
Corn Seed ◽  
Optimal Depth ◽  
Seed Distribution ◽  
Maturity Groups ◽  
Good Germination

The main goal of sowing is the distribution of seeds at an optimal depth with adequate seed spacings. The results of the optimal sowing, in both horizontal and vertical directions, are better germination and sprouting, as well as increased yield and reduced influence of plants on each other’s space for growing, regarding the available light, nutrients and moisture. Quality of horizontal and vertical seed distribution is influenced by the distance between rows, sowing depth, pre-sowing preparation, seed drill, seeding mechanism, sowing density, and operator’s skills. The arithmetic mean of spacing (Am), standard deviation for spacings between the plants (SD) and coefficient of variation (CV) are usually used for representation of sowing evenness. Assuming that the seeds are of good germination quality, the yield is directly dependent on the sowing quality and organization of plants per unit of surface area. A well prepared plot was sown with 20 corn seed hybrids from different FAO maturity groups. The sowing was performed with precision pneumatic seed drill INO Becker Aeromat 2, which ejects individual seeds by using the overpressure.After sprouting, no statistically significant differences were found between the sowing of hybrids from different FAO maturity groups and their characteristics. When the yield is concerned, biological characteristics of hybrids are much more influential than the quality of sowing. This is true only if the tractor implement for wide row planting is properly adjusted.

scholarly journals Optimization of Parameters and Operating Modes of Disc Sowing Device According to Seeding Uniformity Criterion

2018 ◽  
Vol 28 (3) ◽  
pp. 379-388
Author(s):  
Vladimir A. Ovchinnikov ◽  
Mikhail N. Chatkin ◽  
Alena V. Ovchinnikova
Keyword(s):  
Experimental Studies ◽  
Operating Conditions ◽  
Design Parameters ◽  
Optimal Parameters ◽  
Plant Growth And Development ◽  
Important Condition ◽  
Operating Modes ◽  
Favorable Conditions ◽  
Uniformity Criterion

Introduction. When cultivating agricultural crops, it is necessary to take into account the plants’ need for moisture, nutrients, location by area of nutrition, determining illumination, etc. Taking into account the biological characteristics of crops, various methods of sowing are used to create favorable conditions for plant growth and development. An important condition for sowing is the uniform arrangement of seeds along the sulcus, especially in the cultivation of testes of small-seeded cultures. A key role in the uniformity of seeding is provided by the design parameters and kinematic operating conditions of the sowing device. Materials and Methods. To determine the optimal parameters and operating modes of the disk sowing device, methods of factor experiment and multi-criteria optimization were used. Results. Mathematical models of the technological process of sowing seeds were obtained based of experimental studies. Conclusions. To ensure the improvement of the seeding quality of small seeds, the design parameters of the experimental seeder: х4 – is the diameter of the cell; х5 – the number of cells on the disk, will tend to the maximum values. The optimum circumferential speed of the sowing disk should be in the range from 0.127 to 0.192 m/s, and the speed of the machine’s movement is no more than 2 m/s.

scholarly journals Study on plowing of cotton soil using two-tier plow

2021 ◽  
Vol 939 (1) ◽  
pp. 012066
Author(s):  
F Mamatov ◽  
I Temirov ◽  
P Berdimuratov ◽  
A Mambetsheripova ◽  
S Ochilov
Keyword(s):  
Mathematical Analysis ◽  
Coefficient Of Variation ◽  
Transverse Direction ◽  
Classical Mechanics ◽  
Agricultural Technology ◽  
Cotton Field ◽  
Row Spacing ◽  
Basic Principles ◽  
Analytical Expressions

Abstract The purpose of the study is to substantiate the parameters of a two-tier plow for plowing soil from under cotton. The basic principles and methods of classical mechanics, mathematical analysis and statistics were used in this study. The effects of the cotton field relief on the tillage and traction resistance of a two-tier plow were studied theoretically and experimentally. Analytical expressions are obtained for determining the uniformity of the course, the load of the bodies and the center of resistance of the plow, depending on its main parameters and the roughness of the relief of the cotton field. It is established that serial two-tier plows, due to the discrepancy between their width of the gripper and the width of the row spacing, do not meet the requirements of agricultural technology: the plowing depth is not stable, the coefficient of variation of the plowing depth reaches 16% for a trailed plow, and for a mounted plow - 25.8%; the transverse direction of the plough the bottom of the furrow turns out to be stepped; the value of the traction resistance changes at each pass of the plow. To improve the quality of plowing fields from under cotton, a new plowing method has been developed, carried out by a two-tier plow, the width of which is a multiple of the width of the row spacing of cotton. The width of the plow bodies is equal to half the width of the row spacing.

scholarly journals Modelling the effect of continuous mixer operating parameters on mixture quality

2020 ◽  
Vol 164 ◽  
pp. 08009
Author(s):  
Alexey Kaliganov ◽  
Vladimir Konovalov ◽  
Alexey Chupshev ◽  
Vyacheslav Teryushkov
Keyword(s):  
Regression Model ◽  
Research Methodology ◽  
Coefficient Of Variation ◽  
Experimental Studies ◽  
Rotation Frequency ◽  
Operating Parameters ◽  
Kinematic Parameters ◽  
Continuous Mixing ◽  
Working Element

The aim of the research was to obtain a regression model of the influence of some structural and kinematic parameters of a continuous mixer working element on the quality of the prepared mixture. The research methodology included the analysis of the design of the mixing unit and the identification of factors that could significantly affect the quality of the mixture. Later, on the basis of the experimental studies, the quality of the mixture at given values of factors was determined and a regression model was established. The developed functional diagram of a continuous mixing unit made it possible to establish factors that most intensively affected the quality of the prepared mixture. The obtained adequate regression model of the coefficient of variation of the content of the control component in the samples of the mixture indicated an improvement in the quality of the mixture with an increase in the frequency of rotation of the mixers and the number of the arms levels. In terms of quality indicators, a rotation frequency of about 1500 rpm was most preferable with a number of mixer levels of at least 5.

The system of indicators of the quality of the carbon-carbon composite materials and technologies of their production

2018 ◽  
pp. 127-132
Author(s):  
T. N. Antipova ◽  
D. S. Shiroyan
Keyword(s):  
Composite Material ◽  
Low Cost ◽  
Experimental Studies ◽  
Carbon Matrix ◽  
Carbon Composite ◽  
Optimal Number ◽  
Laboratory Equipment ◽  
Carbon Composite Material ◽  
Carbon Composite Materials

The system of indicators of quality of carbon-carbon composite material and technological operations of its production is proved in the work. As a result of the experimental studies, with respect to the existing laboratory equipment, the optimal number of cycles of saturation of the reinforcing frame with a carbon matrix is determined. It was found that to obtain a carbon-carbon composite material with a low cost and the required quality indicators, it is necessary to introduce additional parameters of the pitch melt at the impregnation stage.

Influence of different factors on the growth rate of young animals and the quality of beef

2021 ◽  
pp. 28-39
Author(s):  
V. N. Pristupa ◽  
D. S. Torosyan
Keyword(s):  
Experimental Studies ◽  
Live Weight ◽  
Federal District ◽  
Steppe Zone ◽  
Industrial Complex ◽  
Black And White ◽  
Dry Steppe ◽  
Intensive Rearing ◽  
Meat Productivity

The purpose of the work was to study and identify the main factors aff ecting the quantity and quality of beef produced and sold in the Southern Federal district. A comparative assessment of the growth, development, formation of meat productivity and quality of beef of young animals of beef, dual and dairy breeds with stall-pasture technology and intensive rearing in the industrial complex. Experimental studies have been carried out in farms in the Rostov region. The object of research was cows with calves of Kalmyk, Hereford, Aberdeen-Angus, Russian komolaya, Kazakh White-headed breeds, as well as young animals of the same breeds, in addition, Black-and-White and Swiss breeds. Removable live weight in Hereford steers at 18 months of age was 658,0 kg, and Aberdeen-Angus – 655,2 kg. Domestic steers of Kalmyk were 41–44 kg lower in live weight than their herdmates of two imported breeds. However, with intensive rearing at 18 months of age, steers of Kalmyk breed had a removable live weight of more than 613,7 kg and a carcass weight of 326 kg. The yield of hot carcass was 55,4 %, and the slaughter yield was 58,89 %, which was only 1–2 % lower than the world’s leading beef breeds. It has been found when analyzing the results of boning the half-carcasses of experimental steers that the biggest weight of half-carcasses and the content of muscle and fat tissue in them in absolute terms were in Hereford steers. Steers of Kalmyk breed took the third place in terms of weight of large-sized semi–fi nished products and signifi cantly lost to Aberdeen-Angus herdmates by 7,3 kg or 6,5 %, and Hereford steers by 9,2 kg or 8,3 %. The results obtained prove the expediency of using stallpasture technology in the dry-steppe zone of the Southern Federal district when rearing young animals for beef up to 350–400 kg live weight at 15 months of age and its subsequent intensive rearing under industrial technology, in order to obtain the live weight of more than 570 kg and produce cost-eff ective beef.

Method of experimental evaluation of the efficiency coefficient of vibration protection of the rope-rod coupling "MAMSAR+A" of the diesel generator set DGA-8.83

2021 ◽  
pp. 88-95
Author(s):  
М.А. Минасян ◽  
А.М. Минасян ◽  
Ц. Цзэн
Keyword(s):  
Experimental Evaluation ◽  
Vibration Isolation ◽  
Experimental Studies ◽  
Original Method ◽  
Efficiency Coefficient ◽  
Diesel Generator ◽  
Vibration Protection ◽  
Rigid Connection ◽  
Two Stages

Объектом исследования является опытный образец запатентованной канатностержневой муфты (КСМ) «MAMSAR+А» в качестве привода дизель-генераторного агрегата ДГА-8,83 мощностью 9,56 кВт при частоте вращения 1500 мин-1 с дизелем 2Ч 8,5/11 и генератором «ГК-5,6». Целью исследования является экспериментальная оценка коэффициента эффективности вибрационной защиты КСМ. Поставленная цель достигается разработкой и реализацией оригинальной методики экспериментальной оценки коэффициента эффективности КСМ с анализом и выводами результатов экспериментальных исследований. Экспериментальные исследования проводятся в два этапа. Первый этап – с упругим соединением КСМ, второй этап – с жестким соединением. Оригинальность методики экспериментальной оценки коэффициента эффективности вибрационной защиты КСМ главным образом заключается в том, что между двумя этапами экспериментальных исследований КСМ не демонтируется. Следовательно, качество центровки не нарушается. Усредненный коэффициент эффективности виброизоляции КСМ составляет от 3 до 8 дБ. The object of this research is a prototype of the patented wire rope coupling (KSM) "MAMSAR+A" as a drive for a diesel-generator unit DGA-8.83 with a power of 9.56 kW at a speed of 1500 min-1 with a 2CH 8.5/11 diesel engine and a generator "KG-5.6". The aim of the research is to experimentally evaluate the efficiency coefficient of vibration protection of the KSM. This goal is achieved by developing and implementing an original method for experimental evaluation the efficiency coefficient of the KSM with analysis and conclusions of the results of experimental studies. Experimental studies are conducted in two stages. The first stage - with an elastic connection of the coupling, the second stage - with a rigid connection. The originality of the method of experimental evaluation of the efficiency coefficient of vibration protection of the KSM mainly lies in the fact that the KSM is not dismantled between the two stages of experimental research. Therefore, the quality of alignment is not violated. The average coefficient of vibration isolation efficiency of the KSM is from 3 to 8 dB.

CONSUMER PROPERTIES OF PASTA WITH POWDER FROM MARIGOLD INFLORESCENCES (TAGETES L.)

2021 ◽  
Vol 40 (4) ◽  
pp. 102-112
Author(s):  
SHAPOVALOVA Nataliia ◽  
VEZHLIVTSEVA Svitlana ◽  
ANTIUSHKO Dmytro
Keyword(s):  
Raw Materials ◽  
Experimental Studies ◽  
The Body ◽  
Biologically Active Substances ◽  
Biologically Active ◽  
Organoleptic Properties ◽  
Biological Value ◽  
Plant Raw Materials ◽  
Active Substances

Background. The deficiency of essential nutrients in the human body is the root cause of reduced efficiency, general resistance of the body to various diseases. That is an urgent problem in the context of the spread of coronavirus infection. In this regard, the search for opportunities to meet the needs of the population in food products that contain biologically active substances (BAS) through the use of high-value and at the same time available plant raw materials is extremely important. Marigolds attract special attention among such raw materials. The aim of the work is to study the chemical composition and evaluate the consumer properties of Tagetes L. varieties, zoned in the Kiev region, to prove the possibility of increasing the biological value of pasta by adding to their recipe powder from marigold inflorescences. Materials and methods. The object of research is pasta of B group (noodles). Inflorescences of marigolds of different varieties gathered during the flowering period in July-September 2019–2020 in the territory of Vasylkiv and Obukhiv districts of Kyiv region, Ukraine were used as enriching plant raw materials. The quality of finished pasta was assessed by organoleptic and physicochemical indexes (moisture content and titratable acidity). The content of mineral elements in the fine powder of marigold inflorescences was determined on the EXHERT-3L device, the quantitative composition and BAS identification – by spectrophotometric analysis on the device Specord-200 Analytic Jena UV-vis. The integrated quality index of pasta products was calculated taking into account the importance factors of individual indexes. Results. Comparing the obtained results, we can state that all the studied varieties – Gold Kopfen, Orange Flame, Hawaii, Equinox are characterized by high biological value, regardless of the area of collection. As a result of calculated and experimental studies it was determined that the addition of 7 % of the supplement does not provide the required supply of vitamins and minerals. Replacing the flour in the recipe by 20 % significantly improves the mineral composition, but deteriorates the taste and aromatic properties of pasta. The most optimal and rational amount of added additive is 15 %, as it improves the organoleptic properties of pasta and enriches their BAS. Conclusion. The usage of non-traditional vegetable raw materials, in particular powder from marigold inflorescences, which is rich in biologically active substances, allows not only to expand the range, improve the quality of finished products, but also increase the biological value of the product. The optimal amount of additive –powder from marigold inflorescences, was defined. It is 15 % by weight of flour in the production of noodles. This concentration allows not only to improve the organoleptic properties, but also to increase the content of biologically active substances – vitamins, micro- and macronutrients. The usage of non-traditional natural raw materials (powder from marigold inflorescences) allows to abandon artificial colorsand give the finished pasta a pleasant colorand aroma.

Effect of Abrasive Tools in Galvanomechanical Treatment on the Roughness of the Deposited Chromium Layer

2018 ◽  
Vol 284 ◽  
pp. 1178-1183 ◽  
Author(s):  
D.A. Zherebtcov ◽  
Oksana N. Gruba ◽  
K.R. Smolyakova
Keyword(s):  
Experimental Studies ◽  
The Body ◽  
Abrasive Tool ◽  
Chromium Layer ◽  
Pressing Force ◽  
Hard Chromium ◽  
Chromium Plating ◽  
Cylindrical Parts ◽  
Abrasive Tools

The article deals with the method of obtaining a hard chromium coating on details of the "body of rotation" type with the use of an abrasive tool. The influence of the composition and hardness of the elastic abrasive tool on the results of galvanomechanical chromium plating of rotating cylindrical parts has been studied. Binder compositions for an abrasive tool used to improve the roughness of the deposited chromium layer have been developed. A series of experimental studies has been carried out with chromium plating of steel cylindrical parts with simultaneous abrasive processing. Beforehand, an abrasive tool with previously developed binder formulations was manufactured. The obtained results of the influence of the characteristics of the abrasive tool and its pressing force on the chromium-plated part on the quality of the precipitated chromium made it possible to determine the optimum modes for obtaining a coating of the required thickness. Also, a suitable abrasive tool has been chosen to obtain a coating of proper quality.

scholarly journals DIAGNÓSTICO DE CANTEIROS DE OBRAS SITUADOS NA CONURBAÇÃO CRAJUBAR NO CARIRI CEARENSE

2018 ◽  
Vol 14 (2) ◽  
Author(s):  
Antônio Italcy de Oliveira Júnior ◽  
Michelly Matos Pereira ◽  
Celme Torres Ferreira da Costa
Keyword(s):  
Diagnostic Method ◽  
Arithmetic Mean ◽  
Great Good ◽  
Construction Sites ◽  
The Sustainable Development ◽  
Mixed Use ◽  
Increase Productivity ◽  
And Storage ◽  
Means Of Production

RESUMO: No momento de instabilidade econômica em que se encontra o país, ações que minimizem os gastos e que aumentem a produtividade na construção civil visando ao desenvolvimento sustentável dos meios de produção estão cada vez mais sendo solicitadas. Com o intuito de realizar um diagnóstico da disposição, organização e práticas nos canteiros de obra da região do Crajubar, foram estudadas dez construções em execução na região. A amostra selecionada contemplava edificações horizontais e verticais, com finalidade de uso comercial, residencial e mista. Os dados foram obtidos a partir do método de diagnóstico que consiste na aplicação de uma lista de verificação (check-list) padronizada, que contemplava três grupos a serem analisados: instalações provisórias, segurança na obra e movimentação e armazenagem de materiais. Para a visualização e identificação de falhas nos canteiros foi feito um registro fotográfico de itens pré-determinados. De posse das informações coletadas foram atribuídas notas para os grupos, calculada a nota global (que é a média aritmética das notas de grupo) e as obras foram distribuídas em quatro categorias: ótimas, boas, regulares e ruins. As obras horizontais obtiveram as piores notas, entre 4,01 e 6, enquanto as obras verticais que apresentavam políticas de gestão de qualidade se destacaram com as melhores notas, entre 8,01 e 10. O tipo de obra foi o fator que mais influenciou na qualidade dos canteiros de obras avaliados no Crajubar cearense.ABSTRACT: At a time of economic instability in the country, actions that minimize expenditures and increase productivity in civil construction aimed at the sustainable development of the means of production are increasingly being requested. In order to make a diagnosis of the layout, organization and practices in the construction sites of the Crajubar region, ten constructions were studied in the region. The sample selected included horizontal and vertical buildings, for commercial, residential and mixed use. The data were obtained from the diagnostic method, which consists of the application of a standardized checklist, which included three groups to be analyzed: temporary installations, handling and storage of materials. Along with this list, a photographic record of predetermined items was made for the visualization and identification of defects in the construction. From the information collected, the group notes and a global grade (the arithmetic mean of the group notes) were assigned and the works were distributed into four categories: great, good, regular and bad. The horizontal construction obtained the worse notes, between 4.01 and 6, while the vertical construction that presented policies of quality management stood out with the best notes, between 8,01 and 10. The type of construction was the factor that most influenced the quality of the construction sites evaluated in Crajubar cearense.

Sign in / Sign up

Export Citation Format

Share Document