Comparison of Implant Stability Between Conventional Drills and Piezosurgical Implant Bed Preparation Techniques

2021 ◽  
Author(s):  
Martin Kjaergaard ◽  
Vinh Giap Nguyen ◽  
Jan Brandt ◽  
Joanne Pouchet ◽  
Paul Martin Weigl
Keyword(s):  
Test Group ◽  
Implant Stability ◽  
Bone Response ◽  
Piezoelectric Surgery ◽  
Significant Difference ◽  
The Stability ◽  
Implant Bed ◽  
First 90 Days ◽  
Preparation Techniques

This prospective study compared the stability of implants placed using piezoelectric surgery (piezo group) and those placed using conventional rotary drills (bur group) during the first 90 days postoperatively.  Teeth in the posterior maxillary regions of twenty-one patients were randomly assigned to two groups.  The implant stability quotient (ISQ) was measured at days 0, 7, 14, 21, 28, 42, 56 and 90 postoperatively.  Twenty eight out of 29 implants were successfully integrated at day 90 (one implant in the test group was lost). Although both groups showed a significant overall increase in implant stability with time (p< 0.0001) and a high final mean ISQ value, no statistically significant difference in stability was seen between groups. The bur group showed greater variance in ISQ values than the piezo group (p< 0.001) at all time points. Long-term studies with larger samples are needed to investigate the bone response to the use of piezoelectric surgery for implant preparation.

scholarly journals The Effect of Recipient Jaw and Implant Dimensions on Pre- and Post- Loading Dental Implant Stability: A Prospective Clinical Study

2021 ◽  
Vol 33 (4) ◽  
pp. 31-37
Author(s):  
Dhuha A Al-Assaf ◽  
Salwan Y Bede
Keyword(s):  
Dental Implant ◽  
Primary Stability ◽  
Prospective Clinical Study ◽  
Implant Stability ◽  
Significant Difference ◽  
Rest Time ◽  
Age Range ◽  
Implant Length ◽  
Functional Loading

Background: Implant stability is a mandatory factor for dental implant (DI) osseointegration and long-term success. The aim of this study was to evaluate the effect of implant length, diameter, and recipient jaw on the pre- and post-functional loading stability. Materials and methods: This study included 17 healthy patients with an age range of 24-61 years. Twenty-two DI were inserted into healed extraction sockets to replace missing tooth/ teeth in premolar and molar regions in upper and lower jaws. Implant stability was measured for each implant and was recorded as implant stability quotient (ISQ) immediately (ISQ0), and at 8 (ISQ8) and 12 (ISQ12) weeks postoperatively, as well as post-functional loading (ISQPFL). The pattern of implant stability changes throughout the study period and its correlation with the recipient jaw and the DI dimensions were evaluated. Results: There was a significant difference in ISQ values throughout the study. DI stability in the maxilla was significantly higher than that in mandible for the ISQ0, with no significant effect for the rest time points. The effect of implant diameter was significant with DI of 4.1mm diameter being more stable. While for the length, there was no significant difference regarding its effect on ISQ values through-out the study period. Conclusions: DI inserted in the maxilla demonstrated better primary stability with no effect of recipient jaw on secondary stability and after functional loading, also DI with wider diameter had better stability throughout the study whereas DI length showed no significant effect on stability

scholarly journals A Retrospective Study on Insertion Torque and Implant Stability Quotient (ISQ) as Stability Parameters for Immediate Loading of Implants in Fresh Extraction Sockets

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Giuseppe Bavetta ◽  
Giorgio Bavetta ◽  
Valentina Randazzo ◽  
Alessio Cavataio ◽  
Carlo Paderni ◽  
...  
Keyword(s):  
Test Group ◽  
Immediate Loading ◽  
Control Group ◽  
Insertion Torque ◽  
Implant Stability ◽  
Stability Parameters ◽  
Mean Values ◽  
Implant Stability Quotient ◽  
Significant Difference ◽  
Best Parameter

Background. To date, insertion torque value (ITV) and implant stability quotient (ISQ) obtained by the Osstell instrument are common clinical methods to assess the initial stability of an implant for a predictable loading procedure. The aim of this current study is to evaluate the ITV and ISQ as stability parameters as part of the decision-making protocol in the adoption of immediate loading in fresh extraction sockets. Materials and Methods. A total of 41 tapered implants were allocated into two groups: the test group (n = 11; 3 males and 8 females; mean age: 62.8 ± 10.7) which received 18 implants as type 1 fresh extraction sockets after teeth removal and the control group (n = 7; 4 males and 3 females; mean age: 65.4 ± 9.7) which received 23 implants placed in healed sockets for a period of at least 3 months. Both the ITV and ISQ data were recorded at the time of insertion (t0). Since ITV (test group) and ITV/ISQ (control group) values were useful for the immediate loading protocol, a screw-retained temporary crown was immediately loaded. ISQ values were recorded after a healing period of 4 months (t1). Results. ITV mean values at t0 in test and control groups were, respectively, 48.61 ± 15.39 and 70.47 ± 14.71, whereas ISQ mean values were 57.55 ± 1.93 and 72.86 ± 5.25, respectively, showing a statistically significant difference (p value < 0.001). ISQ mean values at t1 in either the test or the control group were 68.68 ± 4.20 and 74.54 ± 4.17, not showing a statistical difference. The implant survival rate was 100% in both groups, and no surgical and prosthetic complications were reported during the study. Conclusion. In conclusion, this study remarked the presence of a residual gap that influenced the ISQ during implant insertion in fresh extraction sockets making this parameter not sufficient for a conclusive decision in the immediate loading, whereas the ITV alone showed to be the best parameter for a final substantial decision.

scholarly journals Clinical Assessment of Dental Implants Placed in Low-Quality Bone Sites Prepared for the Healing Chamber with Osseodensification Concept: A Double-Blind, Randomized Clinical Trial

2021 ◽  
Vol 11 (2) ◽  
pp. 640
Author(s):  
Rafael Coutinho Mello-Machado ◽  
Carlos Fernando de Almeida Barros Mourão ◽  
Kayvon Javid ◽  
Henrique T. Ferreira ◽  
Pietro Montemezzi ◽  
...  
Keyword(s):  
Dental Implants ◽  
Insertion Torque ◽  
Implant Survival ◽  
Implant Stability ◽  
Double Blind ◽  
Implant Placement ◽  
The Stability ◽  
To Receive ◽  
Preparation Techniques ◽  
Secondary Stability

The present study aimed to compare the stability of dental implants placed in low-quality bone prepared for the healing chamber with osseodensification technique and a standard undersized drilling. Sixteen subjects presenting D3 or D4 bone density according to Misch’s classification were randomly distributed to receive dental implants following either osseodensification (G1: n = 29) or standard undersized drilling (G2: n = 26) preparation techniques. Implant insertion torque (IT) and implant stability quotient (ISQ) were measured immediately after implant placement. Implant survival and secondary stability (ISQ) were evaluated after six months. The G1 group showed higher IT (39.0 ± 6.4 Ncm) than G2 (32.0 ± 3.4 Ncm) (p < 0.001). ISQ values were similar (p > 0.05) at the implant insertion (67.1 ± 3.2 and 65.5 ± 2.7 for G1 and G2, respectively). After six months healing, implant survival was equally comparable in both groups (p > 0.05), and ISQ values were higher than those of implant insertion (p < 0.001) but similar (p > 0.05) for both groups (74.0 ± 3.6 and 73.3 ± 3.2 for G1 and G2, respectively). Within the limitations of this study, the present RCT demonstrated that a wider surgical bed prepared by osseodensification instrumentation allowed for the bone healing-chamber concept in low-quality bone without any reduction in implant stability and success rate.

The Stability of the WHO Reference Thromboplastin NIBS & C 67/40

1979 ◽  
Vol 42 (04) ◽  
pp. 1135-1140 ◽  
Author(s):  
G I C Ingram
Keyword(s):  
Human Brain ◽  
Collaborative Study ◽  
Calibration Constant ◽  
Long Term Stability ◽  
Freeze Dried ◽  
Show Evidence ◽  
Human Material ◽  
Reference Preparation ◽  
The Stability

SummaryThe International Reference Preparation of human brain thromboplastin coded 67/40 has been thought to show evidence of instability. The evidence is discussed and is not thought to be strong; but it is suggested that it would be wise to replace 67/40 with a new preparation of human brain, both for this reason and because 67/40 is in a form (like Thrombotest) in which few workers seem to use human brain. A �plain� preparation would be more appropriate; and a freeze-dried sample of BCT is recommended as the successor preparation. The opportunity should be taken also to replace the corresponding ox and rabbit preparations. In the collaborative study which would be required it would then be desirable to test in parallel the three old and the three new preparations. The relative sensitivities of the old preparations could be compared with those found in earlier studies to obtain further evidence on the stability of 67/40; if stability were confirmed, the new preparations should be calibrated against it, but if not, the new human material should receive a calibration constant of 1.0 and the new ox and rabbit materials calibrated against that.The types of evidence available for monitoring the long-term stability of a thromboplastin are discussed.

Improvement Of Curvilinear Diagrams Of Concrete Deformation

2019 ◽  
pp. 99-104
Keyword(s):  
Reinforced Concrete ◽  
Peak Load ◽  
Experimental Studies ◽  
Concrete Structures ◽  
Deformation Model ◽  
Reinforced Concrete Structures ◽  
Significant Difference ◽  
Deformation Diagrams

Problems when calculating reinforced concrete structures based on the concrete deformation under compression diagram, which is presented both in Russian and foreign regulatory documents on the design of concrete and reinforced concrete structures are considered. The correctness of their compliance for all classes of concrete remains very approximate, especially a significant difference occurs when using Euronorm due to the different shape and sizes of the samples. At present, there are no methodical recommendations for determining the ultimate relative deformations of concrete under axial compression and the construction of curvilinear deformation diagrams, which leads to limited experimental data and, as a result, does not make it possible to enter more detailed ultimate strain values into domestic standards. The results of experimental studies to determine the ultimate relative deformations of concrete under compression for different classes of concrete, which allowed to make analytical dependences for the evaluation of the ultimate relative deformations and description of curvilinear deformation diagrams, are presented. The article discusses various options for using the deformation model to assess the stress-strain state of the structure, it is concluded that it is necessary to use not only the finite values of the ultimate deformations, but also their intermediate values. This requires reliable diagrams "s–e” for all classes of concrete. The difficulties of measuring deformations in concrete subjected to peak load, corresponding to the prismatic strength, as well as main cracks that appeared under conditions of long-term step loading are highlighted. Variants of more accurate measurements are proposed. Development and implementation of the new standard GOST "Concretes. Methods for determination of complete diagrams" on the basis of the developed method for obtaining complete diagrams of concrete deformation under compression for the evaluation of ultimate deformability of concrete under compression are necessary.

Assessment of healing of dental implant surgical site following Low-Level Laser Therapy using Bio-Clinical parameters: An Exploratory Study

2020 ◽  
Author(s):  
VARSHA PALLED ◽  
DR. JITENDRA RAO ◽  
DR. RAGHUWAR DAYAL SINGH ◽  
DR. SHUCHI TRIPATHI ◽  
DR. KALPANA SINGH ◽  
...  
Keyword(s):  
Laser Therapy ◽  
Test Group ◽  
Low Level Laser Therapy ◽  
Control Group ◽  
Clinical Parameters ◽  
Implant Stability ◽  
Low Level ◽  
Implant Stability Quotient ◽  
Low Level Laser ◽  
Level Laser

The purpose of this study was to evaluate whether Low-Level Laser Therapy (LLLT) improves the healing of the implant surgical site with clinical and biochemical parameters.Thirty patients with an edentulous space spanning a single tooth were selected. The patients were randomly allocated to two groups - the control group and the test group. The test group received laser energy at a power of 2J/cm 2 with a total of 4-6J energy over each implant. Clinical parameters (Implant Stability Quotient, probing index, modified sulcus bleeding index)and osteoprotegerin (OPG) were assessed at baseline and follow-up intervals (2 weeks, 6 weeks, and 3 months).The test group showed significantly higher implant stability quotient compared to thecontrol group at 2 weeks(57.93±3.95 and 35.67±3.08; p&lt;0.01) and 3months(58.86±3.75 and 67.06±3.78; p&lt;0.01). A significant rise in OPG levels of the test group(686.30±125.36pg/ml at baseline and 784.25±108.30pg/ml at 3months;p&lt;0.01) was seen contrary to significant decline in the control group (839.50±249.08pg/ml at baseline,415.30±78.39pg/ml at 3months;p&lt;0.01). Within the limitations of the study, the study suggests that the healing of peri-implant hard and soft tissues may be enhanced with the use of LLLT as an explicit modality during the post-operative period.

Effects of Virgin Coconut Oil as Adjunct Therapy in the Treatment of Allergic Rhinitis

2016 ◽  
Vol 1 (1) ◽  
pp. 22
Author(s):  
Nazli Zainuddin ◽  
Nurul Azira Mohd Shah ◽  
Rosdan Salim
Keyword(s):  
Allergic Rhinitis ◽  
Side Effects ◽  
Coconut Oil ◽  
Test Group ◽  
Nasal Symptom ◽  
Control Group ◽  
Virgin Coconut Oil ◽  
Control Groups ◽  
Significant Difference ◽  
And Control

Introduction: The role of virgin coconut oil in the treatment of allergic rhinitis is controversial. Thus, the aim of the present study is to determine the effects of virgin coconut oil ingestion, in addition to standard medications, on allergic rhinitis. We also studied the side effects of consumption of virgin coconut oil. Methods: Fifty two subjects were equally divided into test and control groups. All subjects received a daily dose of 10mg of loratadine for 28 days. The test group was given 10ml of virgin coconut oil three times a day in addition to loratadine. The symptoms of allergic rhinitis were scored at the beginning and end of the study. Results:, the symptom score were divided into nasal and non-nasal symptom scores. Sneezing score showed a significant difference, however the score was more in control group than test group, indicating that improvement in symptom was more in control group. The rest of the nasal symptom and non-nasal symptom score showed no significant difference between test and control groups. Approximately 58% of the test subjects developed side effects from consumption of virgin coconut oil, mainly gastrointestinal side effects. Conclusion: In the present study, ingestion of virgin coconut oil does not improve the overall and individual symptoms of allergic rhinitis, furthermore it has side effects.

Application of the method of mathematical modeling for forecasting channel deformations at the underwater crossing of the main pipeline

2020 ◽  
Vol 10 (6) ◽  
pp. 599-609
Author(s):  
Valery А. Gruzdev ◽  
◽  
Georgy V. Mosolov ◽  
Ekaterina A. Sabayda ◽  
◽  
...  
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Roughness Coefficient ◽  
Computational Domain ◽  
Channel Deformations ◽  
Geological Surveys ◽  
Kuban River ◽  
The Stability ◽  
Protective Structures

In order to determine the possibility of using the method of mathematical modeling for making long-term forecasts of channel deformations of trunk line underwater crossing (TLUC) through water obstacles, a methodology for performing and analyzing the results of mathematical modeling of channel deformations in the TLUC zone across the Kuban River is considered. Within the framework of the work, the following tasks were solved: 1) the format and composition of the initial data necessary for mathematical modeling were determined; 2) the procedure for assigning the boundaries of the computational domain of the model was considered, the computational domain was broken down into the computational grid, the zoning of the computational domain was performed by the value of the roughness coefficient; 3) the analysis of the results of modeling the water flow was carried out without taking the bottom deformations into account, as well as modeling the bottom deformations, the specifics of the verification and calibration calculations were determined to build a reliable mathematical model; 4) considered the possibility of using the method of mathematical modeling to check the stability of the bottom in the area of TLUC in the presence of man-made dumping or protective structure. It has been established that modeling the flow hydraulics and structure of currents, making short-term forecasts of local high-altitude reshaping of the bottom, determining the tendencies of erosion and accumulation of sediments upstream and downstream of protective structures are applicable for predicting channel deformations in the zone of the TLUC. In all these cases, it is mandatory to have materials from engineering-hydro-meteorological and engineering-geological surveys in an amount sufficient to compile a reliable mathematical model.

Percutaneous glycerol rhizotomy for trigeminal neuralgia in patients with multiple sclerosis: a long-term retrospective cohort study

2020 ◽  
Vol 132 (5) ◽  
pp. 1405-1413 ◽  
Author(s):  
Michael D. Staudt ◽  
Holger Joswig ◽  
Gwynedd E. Pickett ◽  
Keith W. MacDougall ◽  
Andrew G. Parrent
Keyword(s):  
Multiple Sclerosis ◽  
Pain Relief ◽  
Trigeminal Neuralgia ◽  
Retrospective Chart Review ◽  
Medication Usage ◽  
Free Response ◽  
Free Survival ◽  
Time To Recurrence ◽  
Significant Difference

OBJECTIVEThe prevalence of trigeminal neuralgia (TN) in patients with multiple sclerosis (MS-TN) is higher than in the general population (idiopathic TN [ITN]). Glycerol rhizotomy (GR) is a percutaneous lesioning surgery commonly performed for the treatment of medically refractory TN. While treatment for acute pain relief is excellent, long-term pain relief is poorer. The object of this study was to assess the efficacy of percutaneous retrogasserian GR for the treatment of MS-TN versus ITN.METHODSA retrospective chart review was performed, identifying 219 patients who had undergone 401 GR procedures from 1983 to 2018 at a single academic institution. All patients were diagnosed with medically refractory MS-TN (182 procedures) or ITN (219 procedures). The primary outcome measures of interest were immediate pain relief and time to pain recurrence following initial and repeat GR procedures. Secondary outcomes included medication usage and presence of periprocedural hypesthesia.RESULTSThe initial pain-free response rate was similar between groups (p = 0.726): MS-TN initial GR 89.6%; MS-TN repeat GR 91.9%; ITN initial GR 89.6%; ITN repeat GR 87.0%. The median time to recurrence after initial GR was similar between MS-TN (2.7 ± 1.3 years) and ITN (2.1 ± 0.6 years) patients (p = 0.87). However, there was a statistically significant difference in the time to recurrence after repeat GR between MS-TN (2.3 ± 0.5 years) and ITN patients (1.2 ± 0.2 years; p < 0.05). The presence of periprocedural hypesthesia was highly predictive of pain-free survival (p < 0.01).CONCLUSIONSPatients with MS-TN achieve meaningful pain relief following GR, with an efficacy comparable to that following GR in patients with ITN. Initial and subsequent GR procedures are equally efficacious.

Current literature review on methods for measuring the stability of osseointegrable implants.

2020 ◽  
Vol 2 (4) ◽  
pp. 64-78
Author(s):  
Noha El-Wassefy ◽  
Lars Sennerby ◽  
Dhoom SIngh Mehta ◽  
Thiago De Santana Santos
Keyword(s):  
Literature Review ◽  
Current Literature ◽  
Implant Survival ◽  
Implant Stability ◽  
Implant Placement ◽  
Factors Influencing ◽  
Case Documentation ◽  
Bone To Implant Contact ◽  
The Stability

“Osseointegration” as formulated by Alberktson is crucial for implant survival and success. Osseointegration is a measure of implant stability. Measuring implant stability helps to arrive at decisions as to loading of an implant, allows choice of protocol on a patient to patient basis and provides better case documentation. A successful implant reflects good bone to implant contact and is determined by implant stability both primary and secondary. Implant stability is achieved at two different stages – primary (immediately after implant placement) and secondary (3-4 months after implant placement). Implant stability has been confirmed to affect the process of osseointegration and therefore is essential to understand the methods to measure implant stability and factors influencing. Various methods are developed to assess implant stability which suggests the prognosis of an implant.

Sign in / Sign up

Export Citation Format

Share Document