scholarly journals Selection of candidate fish species for farming in the bay of Guaratuba, Brazil

2000 ◽  
Vol 43 (1) ◽  
Author(s):  
Jean-Luc Bouchereau ◽  
Paulo T. Chaves ◽  
Jean-Jacques Albaret
Keyword(s):  
Fish Assemblages ◽  
Relative Size ◽  
Maximum Size ◽  
Maximum Length ◽  
Mangrove Species ◽  
Initial Development ◽  
Centropomus Undecimalis ◽  
Absolute Length ◽  
The Relationship ◽  
Selection Of

An inventory of the maximum length (ML) reached by 57 species of fishes living in the mangrove of Guaratuba, Brazil, was undertaken with an aim to evaluate the relationship between the ecosystem and the size of individuals. For each of these species, the maximum length found in the region were compared with those available in existing literature. The majority of populations presented individuals whose length reached at least 40% than the known maximum length for the species, although only 19.3% were longer than 300mm in absolute value. Population of the other species were represented only by individuals either in their initial development phases, or reduced length as compared to the maximum length known elsewhere for the same species. In this mangrove, species having the largest relative size are generally those that had the smallest absolute length. Proposed is use of an index LR (maximum observed lengths/maximum available lengths) as a tool for description and comparison of fish assemblages. Observations of the maximum size make possible the pre-selection of 12 species for breeding tests. In combining the biological, technical and commercial parameters, the pre-selection retains as primordial the following species: Centropomus parallelus, Centropomus undecimalis, Menticirrhus americanus and Micropogonias furnieri.

Pleomerism, the Widespread Tendency Among Related Fish Species for Vertebral Number to be Correlated with Maximum Body Length

1975 ◽  
Vol 32 (12) ◽  
pp. 2453-2469 ◽  
Author(s):  
C. C. Lindsey
Keyword(s):  
Body Length ◽  
Fish Species ◽  
Population Biology ◽  
Maximum Size ◽  
Maximum Length ◽  
Latitudinal Gradients ◽  
Vertebral Number ◽  
Sea Snakes ◽  
The Relationship ◽  
Maximum Body

Data for 3137 fish species were analyzed for possible correlations, among related species, between mean vertebral number (V) and maximum recorded body length (L). Of 118 families having counts for over 4 species, 90 show a positive correlation; statistically significant correlations are positive in 45 and negative in only 2 families. The relationship can be expressed by the power function V = CLm, in which C and m are constants characteristic of each family or taxon. Among families with a significant correlation between V and L, the median value of m is 0.12 (representing about 10% vertebral increase for each doubling of length) but m ranges widely, from −0.033 to +0.416. Families with high mean vertebral counts tend to have high m values. The phenomenon, termed pleomerism, occurs within genera as well as within families, and sometimes between races, between populations, or even between the sexes. It exists in widely different shapes of fishes (e.g. sharks, mackerels, sea horses, sand lances, and lumpfish), and in caecilians and in sea snakes. Latitudinal gradients in vertebral number (Jordan’s rule) are often reinforced by pleomerism coupled with latitudinal gradients in maximum length, but gradients in vertebral numbers persist even when effect of maximum length is removed. Although its cause is unknown, pleomerism is taxonomically useful in predicting adult sizes of species known only from young specimens, and in unmasking synonymies of "species" based on young of other named species. Vertebral number considered in conjunction with maximum size is more reliable for making taxonomic judgments at all levels than is vertebral number alone. Moreover, if the cause of pleomerism is functional, it may provide information on locomotory mechanisms and on population biology, since mean vertebral number in each population may be matched to that body size at which selection operates most significantly.

An evaluation of ECT sample height for small flute board grades and Box Manufacturer’s Certification compliance

TAPPI Journal ◽  
2009 ◽  
Vol 8 (6) ◽  
pp. 24-28
Author(s):  
CORY JAY WILSON ◽  
BENJAMIN FRANK
Keyword(s):  
Compressive Strength ◽  
Compressive Load ◽  
Test Sample ◽  
Test Methods ◽  
Test Method ◽  
Initial Development ◽  
Sample Height ◽  
Relationship Of ◽  
The Relationship ◽  
Corrugated Fiberboard

TAPPI test T811 is the specified method to ascertain ECT relative to box manufacturer’s certification compliance of corrugated fiberboard under Rule 41/ Alternate Item 222. T811 test sample heights were derived from typical board constructions at the time of the test method’s initial development. New, smaller flute sizes have since been developed, and the use of lighter weight boards has become more common. The T811 test method includes sample specifications for typical A-flute, B-flute, and C-flute singlewall (and doublewall and triplewall) structures, but not for newer thinner E-flute or F-flute structures. This research explores the relationship of ECT sample height to measured compressive load, in an effort to determine valid E-flute and F-flute ECT sample heights for use with the T811 method. Through this process, it identifies challenges present in our use of current ECT test methods as a measure of intrinsic compressive strength for smaller flute structures. The data does not support the use of TAPPI T 811 for ECT measurement for E and F flute structures, and demonstrates inconsistencies with current height specifi-cations for some lightweight B flute.

IMPROVEMENT OF SPRING DURUM WHEAT SELECTION METHODOLOGIES UNDER CLIMATE CHANGE CONDITIONS

1970 ◽  
pp. 33-36
Author(s):  
А. I. Grabovets ◽  
V. P. Kadushkina ◽  
S. А. Kovalenko
Keyword(s):  
Grain Yield ◽  
Durum Wheat ◽  
Correlation Coefficient ◽  
Harvest Index ◽  
Unit Area ◽  
Correlation Coefficients ◽  
Chemical Mutagenesis ◽  
Main Method ◽  
The Relationship ◽  
Selection Of

With the growing aridity of the climate on the Don, it became necessary to improve the methodology for conducting the  breeding of spring durum wheat. The main method of obtaining the source material remains intraspecific step hybridization. Crossings were performed between genetically distant forms, differing in origin and required traits and properties. The use of chemical mutagenesis was a productive way to change the heredity of genotypes in terms of drought tolerance. When breeding for productivity, both in dry years of research and in favorable years, the most objective markers were identified — the size of the aerial mass, the mass of grain per plant, spike, and harvest index. The magnitude of the correlation coefficients between the yield per unit area and the elements of its structure is established. It was most closely associated with them in dry years, while in wet years it decreased. Power the correlation of the characteristics of the pair - the grain yield per square meter - the aboveground biomass averaged r = 0.73, and in dry years it was higher (0.91) than in favorable ones (0.61 - 0.70) , between the harvest and the harvest index - r = 0.81 (on average). In dry years, the correlation coefficient increased to 0.92. Research data confirms the greatest importance of the mass of grain from one ear and the plant in the formation of grain yield per unit area in both dry and wet years. In dry years, the correlation coefficient between yield and grain mass per plant was on average r = 0.80; in favorable years, r = 0.69. The relationship between yield and grain mass from the ear was greater — r = 0.84 and r = 0.82, respectively. Consequently, the breeding significance of the aboveground mass and the productivity of the ear, as a criterion for the selection of the crop, especially increases in the dry years. They were basic in the selection.

Analisa Pemilihan Moda Transportasi Umum Rute Tanjung Karang – Bandara Radin Inten II Dengan Stated Preference dan Uji Crame’s V

2018 ◽  
Vol 2 (2) ◽  
pp. 137
Author(s):  
Muhammad Abi Berkah Nadi
Keyword(s):  
Regression Analysis ◽  
Utility Function ◽  
Stated Preference ◽  
Technical Analysis ◽  
Chi Square ◽  
Time Headway ◽  
Independent Variable ◽  
The Relationship ◽  
Selection Of

Radin Inten II Airport is a national flight in Lampung Province. In this study using the technical analysis stated preference which is the approach by conveying the choice statement in the form of hypotheses to be assessed by the respondent. By using these techniques the researcher can fully control the hypothesized factors. To determine utility function for model forecasting in fulfilling request of traveler is used regression analysis with SPSS program. The analysis results obtained that the passengers of the dominant airport in the selection of modes of cost attributes than on other attributes. From the result of regression analysis, the influence of independent variable to the highest dependent variable is when the five attributes are used together with the R square value of 8.8%. The relationship between cost, time, headway, time acces and service with the selection of modes, the provision that states whether or not there is a decision. The significance of α = 0.05 with chi-square. And the result of Crame's V test average of 0.298 is around the middle, then the relationship is moderate enough.

A Biomarker Combining Imaging and Neuropsychological Assessment for Tracking Early Alzheimer's Disease in Clinical Trials

2018 ◽  
Vol 15 (5) ◽  
pp. 429-442 ◽  
Author(s):  
Nishant Verma ◽  
S. Natasha Beretvas ◽  
Belen Pascual ◽  
Joseph C. Masdeu ◽  
Mia K. Markey ◽  
...  
Keyword(s):  
Alzheimer’S Disease ◽  
Alzheimer's Disease ◽  
Clinical Trials ◽  
Cognitive Impairment ◽  
Latent Variable ◽  
Brain Regions ◽  
Disease Assessment ◽  
Latent Variable Analysis ◽  
The Relationship ◽  
Selection Of

Background: Combining optimized cognitive (Alzheimer's Disease Assessment Scale- Cognitive subscale, ADAS-Cog) and atrophy markers of Alzheimer's disease for tracking progression in clinical trials may provide greater sensitivity than currently used methods, which have yielded negative results in multiple recent trials. Furthermore, it is critical to clarify the relationship among the subcomponents yielded by cognitive and imaging testing, to address the symptomatic and anatomical variability of Alzheimer's disease. Method: Using latent variable analysis, we thoroughly investigated the relationship between cognitive impairment, as assessed on the ADAS-Cog, and cerebral atrophy. A biomarker was developed for Alzheimer's clinical trials that combines cognitive and atrophy markers. Results: Atrophy within specific brain regions was found to be closely related with impairment in cognitive domains of memory, language, and praxis. The proposed biomarker showed significantly better sensitivity in tracking progression of cognitive impairment than the ADAS-Cog in simulated trials and a real world problem. The biomarker also improved the selection of MCI patients (78.8±4.9% specificity at 80% sensitivity) that will evolve to Alzheimer's disease for clinical trials. Conclusion: The proposed biomarker provides a boost to the efficacy of clinical trials focused in the mild cognitive impairment (MCI) stage by significantly improving the sensitivity to detect treatment effects and improving the selection of MCI patients that will evolve to Alzheimer’s disease.

Excessive Belching: a Separate Syndrome or Another Symptom of Functional Dyspepsia?

2020 ◽  
Vol 30 (3) ◽  
pp. 55-60 ◽  
Author(s):  
A. A. Sheptulin ◽  
O. A. Storonova
Keyword(s):  
Functional Dyspepsia ◽  
Functional Gastrointestinal Disorders ◽  
High Resolution Manometry ◽  
Published Evidence ◽  
Key Points ◽  
Dyspeptic Symptoms ◽  
The Relationship ◽  
Rome Iv ◽  
Selection Of ◽  
Optimal Treatment Strategy

Aim of review. Interpretation of published evidence on the relationship between the excessive belching syndrome and functional dyspepsia (FD) and their management in patient care.Key points. According to the Rome IV criteria of functional gastrointestinal disorders (FGID), excessive belching in the absence of other dyspeptic symptoms is to be considered a manifestation of the excessive belching syndrome, which can be of gastric or supragastric nature. Combination of high-resolution manometry and impedancemetry allows an accurate diagnosis of belching and selection of optimal treatment strategy. Belching complicated by other symptoms of dyspepsia is to be considered yet another FD symptom according to the Rome IV criteria of FGID. Prokinetics are recommended to relieve belching in such cases.Conclusion. Understanding the relationship between the excessive belching syndrome and FD requires further research.

scholarly journals The Impact of Alkaloid-Producing Epichloë Endophyte on Forage Ryegrass Breeding: A New Zealand Perspective

Toxins ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 158
Author(s):  
Colin Eady
Keyword(s):  
Seed Production ◽  
Health Issues ◽  
Abiotic Stressors ◽  
Livestock Health ◽  
The Right ◽  
The Impact ◽  
The Relationship ◽  
And Storage ◽  
Selection Of ◽  
Epichloë Endophyte

For 30 years, forage ryegrass breeding has known that the germplasm may contain a maternally inherited symbiotic Epichloë endophyte. These endophytes produce a suite of secondary alkaloid compounds, dependent upon strain. Many produce ergot and other alkaloids, which are associated with both insect deterrence and livestock health issues. The levels of alkaloids and other endophyte characteristics are influenced by strain, host germplasm, and environmental conditions. Some strains in the right host germplasm can confer an advantage over biotic and abiotic stressors, thus acting as a maternally inherited desirable ‘trait’. Through seed production, these mutualistic endophytes do not transmit into 100% of the crop seed and are less vigorous than the grass seed itself. This causes stability and longevity issues for seed production and storage should the ‘trait’ be desired in the germplasm. This makes understanding the precise nature of the relationship vitally important to the plant breeder. These Epichloë endophytes cannot be ‘bred’ in the conventional sense, as they are asexual. Instead, the breeder may modulate endophyte characteristics through selection of host germplasm, a sort of breeding by proxy. This article explores, from a forage seed company perspective, the issues that endophyte characteristics and breeding them by proxy have on ryegrass breeding, and outlines the methods used to assess the ‘trait’, and the application of these through the breeding, production, and deployment processes. Finally, this article investigates opportunities for enhancing the utilisation of alkaloid-producing endophytes within pastures, with a focus on balancing alkaloid levels to further enhance pest deterrence and improving livestock outcomes.

Selection of Materials and Sensors for Health Monitoring of Composite Structures

2003 ◽  
Vol 785 ◽  
Author(s):  
Seth S. Kessler ◽  
S. Mark Spearing
Keyword(s):  
Health Monitoring ◽  
Lamb Wave ◽  
Composite Structures ◽  
Structural Damage ◽  
Performance Metrics ◽  
Full Range ◽  
Transportation Systems ◽  
Health Monitoring Systems ◽  
The Relationship ◽  
Selection Of

ABSTRACTEmbedded structural health monitoring systems are envisioned to be an important component of future transportation systems. One of the key challenges in designing an SHM system is the choice of sensors, and a sensor layout, which can detect unambiguously relevant structural damage. This paper focuses on the relationship between sensors, the materials of which they are made, and their ability to detect structural damage. Sensor selection maps have been produced which plot the capabilities of the full range of available sensor types vs. the key performance metrics (power consumption, resolution, range, sensor size, coverage). This exercise resulted in the identification of piezoceramic Lamb wave transducers as the sensor of choice. Experimental results are presented for the detailed selection of piezoceramic materials to be used as Lamb wave transducers.

scholarly journals Intraspecific Variation in Maximum Ingested Food Size and Body Mass in Varecia rubra and Propithecus coquereli

2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
Adam Hartstone-Rose ◽  
Jonathan M. G. Perry
Keyword(s):  
Body Size ◽  
Body Mass ◽  
Individual Variation ◽  
Size Variation ◽  
Maximum Size ◽  
Least Squares Regression ◽  
Scaling Relationship ◽  
Varecia Rubra ◽  
Food Size ◽  
The Relationship

In a recent study, we quantified the scaling of ingested food size (Vb )—the maximum size at which an animal consistently ingests food whole—and found that Vb scaled isometrically between species of captive strepsirrhines. The current study examines the relationship between Vb and body size within species with a focus on the frugivorous Varecia rubra and the folivorous Propithecus coquereli. We found no overlap in Vb between the species (all V. rubra ingested larger pieces of food relative to those eaten by P. coquereli), and least-squares regression of Vb and three different measures of body mass showed no scaling relationship within each species. We believe that this lack of relationship results from the relatively narrow intraspecific body size variation and seemingly patternless individual variation in Vb within species and take this study as further evidence that general scaling questions are best examined interspecifically rather than intraspecifically.

Sign in / Sign up

Export Citation Format

Share Document