scholarly journals Optimization of Extraction Conditions of Bioactive Compounds by Ultrasonic-Assisted Extraction from Artichoke Wastes

2021 ◽  
Vol 68 (3) ◽  
pp. 658-666
Author(s):  
Izzet Turker ◽  
Hilal Isleroglu
Keyword(s):  
Antioxidant Capacity ◽  
Bioactive Compounds ◽  
Extraction Process ◽  
Extraction Yield ◽  
Extraction Time ◽  
Total Phenolic ◽  
Assisted Extraction ◽  
Ultrasonic Assisted ◽  
Extraction Processes ◽  
Ultrasonic Assisted Extraction

In this study, bioactive compounds were extracted by ultrasonic-assisted extraction and classical extraction processes using distilled water as solvent from artichoke leaves which are considered as agricultural wastes. Antioxidant capacity, total phenolic and total flavonoid content values of the obtained bioactive extracts were determined, and extraction yields and times were evaluated to compare the extraction processes. Also, the optimum extraction conditions of ultrasonic-assisted extraction (extraction time and ultrasonic power) which provide the highest extraction yield were determined using D-optimal design by ‘desirability’ function approach. According to the results, bioactive extracts having high antioxidant capacity were obtained at shorter times and higher extraction yields were achieved by ultrasonic-assisted extraction process than classical extraction. The highest extraction yield was estimated as 98.46% with an application of 20.05 minutes of extraction time and 65.02% of ultrasonic amplitude for the ultrasonic-assisted extraction process.

scholarly journals OPTIMIZATION SEQUENTIAL MICROWAVE ULTRASONIC ASSISTED EXTRACTION TO EXTRACT POLYPHENOL FROM MORINGA OLEIFERA LEAVES USING MULTIRESPONSE SURFACE METHODOLOGY

2021 ◽  
Vol 9 (5) ◽  
pp. 444-451
Author(s):  
G. Restu Prinanda ◽  
◽  
Aji Prasetyaningrum ◽  
Wahyudi a ◽  
Dwi Purwati ◽  
...  
Keyword(s):  
Moringa Oleifera ◽  
Extraction Process ◽  
Extraction Methods ◽  
Extraction Time ◽  
Total Phenolic ◽  
Assisted Extraction ◽  
Ultrasonic Assisted ◽  
Moringa Oleifera Leaves ◽  
Speed Up ◽  
Ultrasonic Assisted Extraction

Moringa leaves contain phenolic compounds and flavonoids which are useful as antioxidants. The disadvantages of traditional extraction methods, such as maceration, include a lengthy extraction process and the use of excessive solvent. Therefore, in this study, moringa leaf extraction was carried out using sequential microwave ultrasonic-assisted extraction (MUAE) to speed up the extraction time, and get more yields. This study aimed to improve the extraction of Moringa leaves with MUAE by adjusting the extraction time, temperature, and ethanol percentage. The conditions varied at extraction time (0, 10, 15, 20, 30 minutes), temperature (30, 40, 50, 60, 80 oC), and ethanol concentration (0, 30, 50, 70, 90%). The findings revealed that the best conditions for extraction Moringa leaves with sequential microwave-ultrasonic assisted extraction were at a time of 15 minutes, a temperature of 55oC, and an ethanol percentage of 54%. In this condition, the extract yield was 12.95%, total phenolic 330.38 GAE mg / 100 g, flavonoids in total 298.15 QE mg / 100 g, the IC50for antioxidant activity is 78.37 ppm.

scholarly journals Antioxidant Activity of Extract from Ultrasonic-Assisted Extraction of Durian Peels

2018 ◽  
Vol 5 (2) ◽  
Author(s):  
Bambang Kunarto ◽  
Ely Yuniarti Sani
Keyword(s):  
Antioxidant Activity ◽  
Total Phenolics ◽  
Extraction Process ◽  
Extraction Time ◽  
Total Flavonoids ◽  
Assisted Extraction ◽  
Ultrasonic Assisted ◽  
Total Flavonoids Content ◽  
Phenolics Content ◽  
Ultrasonic Assisted Extraction

The increase in durian production results in the accumulation of durian peel waste. The bioactive component of durian peel has the potential to be used as an antioxidant. Thus, there is a need to carry out an extraction process to obtain  bioactive compounds from durian peel. However, conventional extraction methods cause damage to phenolic compounds due to oxidation, hydrolysis and ionization reactions during the extraction process. Therefore, durian peel extraction was carried out using ultrasonic assisted extraction method (UAE) in this study. The purpose of this study was to investigate the effect of varying ratios of durian peel to ethanol solvents and extraction time on the yield, total phenolics content, total flavonoids content and antioxidant activity. The results of the research data were analyzed using a two-factor completely randomized design, which included variations of the ratio of durian peel to ethanol solvents and extraction time The Duncan’s New Multiple Range Test (DNMRT) was carried out as a follow up test to determine the differences in each treatment at a significance level of 0.05. The results showed that the best treatment for peel extraction using ultrasonic assisted extraction was a 1: 9 ratio of durian peel to ethanol at an extraction time of 20 minutes. The extraction of durian peel under this condition gave the highest yield of 12.77 ± 0.16%, antioxidant activity (IC50) of 38.33 ± 0.12 ppm, total phenolic content of 63.30 ± 0.08 mgGAE / g and total flavonoids content of 47.53 ± 0.48 mgQE / g. In addition, total phenolics content and total flavonoid content showed a strong correlation to the antioxidant activity of durian peel extract.

scholarly journals Optimasi Ekstraksi Berbantu Gelombang Ultrasonik pada Biji Melinjo Kerikil (Gnetum gnemon L., ‘Kerikil’) Menggunakan Response Surface Methodology

2019 ◽  
Vol 8 (3) ◽  
pp. 104
Author(s):  
Bambang Kunarto ◽  
Sutardi Sutardi ◽  
Supriyanto Supriyanto ◽  
Chairil Anwar
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Reducing Power ◽  
Extraction Process ◽  
Extraction Methods ◽  
Total Phenolic ◽  
Ultrasonic Bath ◽  
Assisted Extraction ◽  
Ultrasonic Assisted ◽  
Ultrasonic Assisted Extraction

Biji melinjo kerikil mengandung senyawa fenolik dan resveratrol sehingga berpotensi sebagai antioksidan, oleh karena itu perlu dilakukan ekstraksi. Metoda ekstraksi konvensional (maserasi, perebusan, refluxing) mempunyai kelemahan yaitu terjadinya kerusakan senyawa fenolik akibat reaksi oksidasi, hidrolisis dan ionisasi selama proses ekstraksi. Oleh karena itu, pada penelitian ini ekstraksi biji melinjo kerikil dilakukan menggunakan metode ekstraksi berbantu gelombang ultrasonik. Penelitian ini bertujuan untuk optimasi ekstraksi biji melinjo kerikil berbantu gelombang ultrasonik yang dilakukan pada berbagai waktu ekstraksi, suhu ekstraksi dan konsentrasi pelarut etanol. Surface response methodology digunakan untuk optimasi kondisi ekstraksi. Biji melinjo kerikil diekstrak menggunakan ultrasonic bath pada frekuensi 40 kHz dengan berbagai suhu (25, 30, 35, 40, 45oC), waktu ekstraksi (10, 20, 30, 40, 50 menit) dan konsentrasi pelarut etanol (40, 50, 60, 70 80%). Hasil penelitian menunjukkan bahwa kondisi optimum ekstraksi biji melinjo kerikil berbantu gelombang ultrasonik adalah pada suhu 30,18oC, waktu 33,01 menit dan konsentrasi pelarut etanol 71,04%. Pada kondisi ini, diperoleh yield ekstrak 18,41 ± 0,01%, total fenolik 11,26 ± 0,06 mg GAE/g, total flavonoid 533,70 ± 0,18 mg CE/100g, resveratrol 7,64 ± 0, 03%, IC50 sebesar 59,52 ± 0,04 ppm dan reducing power 76,31 ± 0,08%. Sebagai kesimpulan, optimasi ekstraksi biji melinjo kerikil berbantu gelombang ultrasonik menggunakan response surface methodology ini cukup baik karena nilai respon yang sebenarnya sesuai dengan nilai respon yang diprediksi.Melinjo kerikil seeds contain phenolic and resveratrol compounds so that it has the potential as an antioxidant, therefore extraction needs to be done. Conventional extraction methods (maceration, boiling, refluxing) have the disadvantage of devasting phenolic compounds due to oxidation, hydrolysis and ionization reactions during the extraction process. Therefore, in this study the extraction of melinjo kerikil seeds done by using the ultrasonic-assisted extraction method. The study aims to optimize ultrasonic-assisted extraction of melinjo kerikil seeds that be done at various extraction times, extraction temperatures and ethanol solvents concentrations. Response surface methodology was used to optimize experimental condition for extraction. Melinjo kerikil seeds were extracted by using ultrasonic bath at a frequency of 40 kHz with various temperatures (25, 30, 35, 40, 45oC), extraction time (10, 20, 30, 40, 50 minutes) and ethanol solvents concentrations (40, 50, 60, 70 80 %). The results showed that the optimum conditions for ultrasonic-assisted extraction of melinjo kerikil seeds were at a temperature of 30.18oC, a time of 33.01 minutes and an ethanol solvent concentration of 71.04%. In this condition, obtained the extract yield 18.41 ± 0.01%, total phenolic 11.26 ± 0.06 mg GAE/g, total flavonoids 533.70 ± 0.18 mg CE/100g, resveratrol 7.64 ± 0,03%, IC50 in the amount of 59.52 ± 0.04 ppm and reducing power 76.31 ± 0.08%. As a conclusion, the optimization ultrasonic-assisted extraction of melinjo kerikil seeds by using response surface methodology is quite good because the actual response value is in accordance with the predicted response value.

scholarly journals Ultrasonic-assisted extraction of gallic acid and isoquercetin from aspergillus niger fermented tri-phala waste

2018 ◽  
Vol 192 ◽  
pp. 03007
Author(s):  
Teerin Chysirichote ◽  
Pattarabhorn Pakaweerachat
Keyword(s):  
Aspergillus Niger ◽  
Gallic Acid ◽  
Extraction Yield ◽  
Deionized Water ◽  
Water Extraction ◽  
Extraction Time ◽  
Ultrasonic Frequency ◽  
Assisted Extraction ◽  
Ultrasonic Assisted ◽  
Ultrasonic Assisted Extraction

The Aspergillus niger fermented Tri-phala waste (FTW) was extracted with ultrasonic assisted extraction (UAE) using deionized water as an extraction medium at 30°C. The 40 kHz ultrasonic frequency was used for sonicate the FTW immerged in the water at the ratio of 1 : 100 for 10, 20, 30, 40, 50 and 60 min. The contents of gallic acid, isoquercetin obtained after extraction were measured by HPLC. The extraction yields of gallic acid and isoquercetin were compared with the yields from the water extraction without ultrasonic assistance (control condition). The results showed that using the ultrasonic assistance increased the extraction yield of gallic acid from 0.25±0.03 to 1.26±0.25 g.g-1 with the shorter extraction time from 60 min to 30 min. Moreover, isoquercetin extraction yield increased from 0.17±0.02 to 0.41±0.04 g.g-1 with the shorter extraction time from 60 min to 20 min.

scholarly journals Enzymatic Pretreatment of Vegetable Materials to Increase the Extraction Yield of Bioactive Compounds

2018 ◽  
Vol 69 (11) ◽  
pp. 3271-3274
Author(s):  
Ioana Asofiei ◽  
Ioan Calinescu ◽  
Petre Chipurici ◽  
Adina Ionuta Gavrila
Keyword(s):  
Phenolic Content ◽  
Extraction Process ◽  
Extraction Yield ◽  
Extraction Time ◽  
Total Phenolic ◽  
Extraction Temperature ◽  
Enzymatic Pretreatment ◽  
Stirring Rate ◽  
Parameters Extraction ◽  
Assisted Extraction

In this paper, the influence of enzymatic pretreatment on the microwave assisted extraction (MAE) of polyphenols from artichoke leaves is described. Prior to enzymatic pretreatment, the influence of different parameters (extraction time, stirring rate, and extraction temperature) on the extraction process was studied. The total phenolic content (TPC) increases with the stirring rate. To avoid degradation of polyphenols, the extraction time and temperature should not be too high. The antioxidant capacity is in concordance with the TPC results. The enzymatic pretreatment, for the best extraction conditions, enhances the concentration of polyphenols compared with the extracts obtained without pretreatment.

scholarly journals Mathematical Modelling of Ultrasound-Assisted Extraction Kinetics of Bioactive Compounds from Artichoke By-Products

Foods ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 931
Author(s):  
Cristina Reche ◽  
Carmen Rosselló ◽  
Mónica M. Umaña ◽  
Valeria Eim ◽  
Susana Simal
Keyword(s):  
Power Density ◽  
Bioactive Compounds ◽  
Extraction Yield ◽  
Total Phenolic ◽  
Model Parameters ◽  
Ultrasound Assisted Extraction ◽  
Yield Curves ◽  
Assisted Extraction ◽  
Ultrasound Assisted ◽  
Ultrasound Power

Valorization of an artichoke by-product, rich in bioactive compounds, by ultrasound-assisted extraction, is proposed. The extraction yield curves of total phenolic content (TPC) and chlorogenic acid content (CAC) in 20% ethanol (v/v) with agitation (100 rpm) and ultrasound (200 and 335 W/L) were determined at 25, 40, and 60 °C. A mathematical model considering simultaneous diffusion and convection is proposed to simulate the extraction curves and to quantify both temperature and ultrasound power density effects in terms of the model parameters variation. The effective diffusion coefficient exhibited temperature dependence (72% increase for TPC from 25 °C to 60 °C), whereas the external mass transfer coefficient and the equilibrium extraction yield depended on both temperature (72% and 90% increases for TPC from 25 to 60 °C) and ultrasound power density (26 and 51% increases for TPC from 0 (agitation) to 335 W/L). The model allowed the accurate curves simulation, the average mean relative error being 5.3 ± 2.6%. Thus, the need of considering two resistances in series to satisfactorily simulate the extraction yield curves could be related to the diffusion of the bioactive compound from inside the vegetable cells toward the intercellular volume and from there, to the liquid phase.

scholarly journals Polyphenols From Vitis vinifera Lambrusco By-Products (Leaves From Pruning): Extraction Parameters Evaluation Through Design of Experiment

2019 ◽  
Vol 14 (7) ◽  
pp. 1934578X1986290 ◽  
Author(s):  
Massimo Tacchini ◽  
Ilaria Burlini ◽  
Immacolata Maresca ◽  
Alessandro Grandini ◽  
Tatiana Bernardi ◽  
...  
Keyword(s):  
Vitis Vinifera ◽  
Antioxidant Capacity ◽  
Design Of Experiment ◽  
Extraction Yield ◽  
Wine Industry ◽  
Raw Material ◽  
Extraction Time ◽  
Total Phenolic ◽  
Vitis Vinifera L ◽  
By Products

Vitis vinifera L. leaves from pruning are by-products of the wine industry and represent an important source of secondary raw material, thanks to their polyphenols content. Optimization of the extraction processes is a key factor for their valorization, and Design of Experiment (DOE) could be a tool to obtain the most performing extract in terms of polyphenols quality/quantity and bioactivity. Vitis vinifera Lambrusco leaves were subjected to ultrasound-assisted extractions guided by a 23 factorial design. Three independent parameters (% solvent, time of extraction, and solvent:solid ratio) were considered to evaluate the extraction process by analyzing the extraction yield, the total phenolic content (Folin-Ciocalteu assay), and the antioxidant capacity (DPPH assay). Moreover, the content of the main molecules was identified and quantified by reversed-phase high-performance liquid chromatography coupled with diode array detection and mass spectrometry. The DOE highlighted the best extraction conditions that showed slight changes considering the different evaluating parameters. The highest extraction yield was obtained by extraction with 100% water, 60 minutes of extraction time, and 30:1 solvent:solid ratio, but it was neither the richest in polyphenols nor antioxidant capacity. The latter 2 characteristics were associated with the extraction performed using 50% ethanol, 35 minutes of extraction time, and a 20:1 solvent:solid ratio. That extract also exhibited the highest quantity of flavonols.

Optimization of Ultrasonic-Assisted Extraction of Polysaccharides from Ottelia acuminata (Gagnep.) Dandy Using RSM

2011 ◽  
Vol 396-398 ◽  
pp. 292-296
Author(s):  
Ai Shi Zhu
Keyword(s):  
Processing Parameters ◽  
Extraction Time ◽  
Extraction Temperature ◽  
Independent Variables ◽  
Solid Ratio ◽  
Assisted Extraction ◽  
Ultrasonic Technology ◽  
Ultrasonic Assisted ◽  
Experimental Yield ◽  
Ultrasonic Assisted Extraction

Ultrasonic technology was applied to polysaccharides extraction from Ottelia acuminata (Gagnep.) Dandy and Response Surface Methodology (RSM) was used to optimize the effects of processing parameters on polysaccharides yields. Three independent variables such as liquid-solid ratio (ml/g, X1), extraction temperature (°C, X2) and extraction time (hour, X3) were investigated respectively. The statistical analysis indicated that the three variables and the quadratic of X1 and X3 had significant effects on the yields and followed by the significant interaction effects between the variables of X1 and X3, X2 and X3 (p<0.05). A mathematical model with high determination coefficient was gained. The optimal extraction conditions of polysaccharides were determined as follows: liquid-solid ratio 43 ml/g, extraction temperature 90 °C and extraction time 3.45 hours. Under these conditions, the experimental yield of polysaccharides was 107.44 mg/g, which was agreed closely with the predicted value 108.71 mg/g.

Sign in / Sign up

Export Citation Format

Share Document