scholarly journals Abscisic acid on the quality of tomato fruits

2020 ◽  
Vol 1 (1) ◽  
pp. 38
Author(s):  
Carlos Agostinho Balate ◽  
Douglas Correa de Souza ◽  
Luis Felipe Lima e Silva ◽  
Luciane Vilela Resende ◽  
Sergio Tonetto de Freitas ◽  
...  
Keyword(s):  
Abscisic Acid ◽  
Fruit Quality ◽  
Tomato Fruit ◽  
Titratable Acidity ◽  
Physicochemical Characteristics ◽  
Quality Parameters ◽  
Soluble Solids ◽  
Exogenous Aba ◽  
Root Treatment

The use of abscisic acid (ABA) in agriculture has increased in the last few years due to the increase in ABA commercial availability at lower costs. The objective of this study was to determine the effect of exogenous ABA on tomato fruit quality parameters such as soluble solids (SS), total and soluble pectins, titratable acidity (TA) and flesh firmness. Tomatoes from the cultivar ‘Santa Clara’ were the study followed a complete randomized block desig, with four treatments in five repetitions. The treatments were plants not treated with ABA (control), foliar sprayed with ABA at 500 mg L-1, 150 mL drench with ABA at 500 mg L-1, or foliar plus drench treated with ABA. After harvesting, the physicochemical characteristics of the fruits were evaluated in the laboratory. All treatments were weekly applied to the plants from anthesis to harvest at fully maturity. Root treatment increased SS by up to 26.12%, increased ratio SS/TA, firmness and decreased soluble pectin. According to the results, it can be concluded that the application of ABA to leaves and roots can improve fruit quality by increasing the SS, ratio SS/TA. The method of application affects the SS content.

scholarly journals Characterization of tomato growth and fruit quality under foliar ammonium sprays

2017 ◽  
Vol 2 (1) ◽  
Author(s):  
Mohammad Kazem Souri ◽  
Sara Dehnavard
Keyword(s):  
Plant Growth ◽  
Ammonium Sulfate ◽  
Fruit Quality ◽  
Foliar Application ◽  
Tomato Fruit ◽  
Nitrogen Concentration ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Quality Factors

AbstractThis study was done to evaluate the effects of foliar application of ammonium sulfate on growth and fruit quality of tomato plants under hydroponic culture system. Over four months of tomato plant growth, plants were sprayed once per week with different concentrations of ammonium sulfate (0, 50, 100 and 200 mM), as well as with 50 mM every second day. Foliar application of ammonium sulfate led to reductions in many growth and quality parameters, and higher ammonium concentrations exerted greater reductions. Number of leaves, fresh weight of shoots, percentage of leaf dry weight and fruit yield were negatively associated with the treatment with ammonium sulfate. However, leaf nitrogen concentration, fruit diameter and fruit length increased significantly by the application of ammonium. Fruit quality factors were also affected by ammonium sulfate spray treatments. The maximum pH, titratable acidity and total soluble solids (TSS) were obtained from the lowest (50 mM) weekly application of ammonium sulfate. The results indicate that foliar application of ammonium in moderate concentrations could have beneficial effects on plant growth and quality of tomato fruit.

scholarly journals Impact of Selenium and Copper Nanoparticles on Yield, Antioxidant System, and Fruit Quality of Tomato Plants

Plants ◽  
2019 ◽  
Vol 8 (10) ◽  
pp. 355 ◽  
Author(s):  
Hernández-Hernández ◽  
Quiterio-Gutiérrez ◽  
Cadenas-Pliego ◽  
Ortega-Ortiz ◽  
Hernández-Fuentes ◽  
...  
Keyword(s):  
Vitamin C ◽  
Fruit Quality ◽  
Tomato Fruit ◽  
Titratable Acidity ◽  
Good Alternative ◽  
Soluble Solids ◽  
Antioxidant Compounds ◽  
Tomato Yield ◽  
The Impact

The effects of nanoparticles (NPs) on plants are contrasting; these depend on the model plant, the synthesis of the nanoparticles (concentration, size, shape), and the forms of application (foliar, substrate, seeds). For this reason, the objective of this study was to report the impact of different concentrations of selenium (Se) and copper (Cu) NPs on yield, antioxidant capacity, and quality of tomato fruit. The different concentrations of Se and Cu NPs were applied to the substrate every 15 days (five applications). The yield was determined until day 102 after the transplant. Non-enzymatic and enzymatic antioxidant compounds were determined in the leaves and fruits as well as the fruit quality at harvest. The results indicate that tomato yield was increased by up to 21% with 10 mg L−1 of Se NPs. In leaves, Se and Cu NPs increased the content of chlorophyll, vitamin C, glutathione, 2,2′-azino-bis(3-ethylbenzthiazolin-6-sulfonic acid (ABTS), superoxide dismutase (SOD), glutathione peroxidase (GPX) and phenylalanine ammonia liasa (PAL). In fruits, they increased vitamin C, glutathione, flavonoids, firmness, total soluble solids, and titratable acidity. The combination of Se and Cu NPs at optimal concentrations could be a good alternative to improve tomato yield and quality, but more studies are needed to elucidate their effects more clearly.

scholarly journals Effect of a Saline Nutritional Regime on Tomato Fruit Yield and on Enhancement of Fruit Quality

1996 ◽  
Vol 1 ◽  
pp. 17
Author(s):  
S. A. AI-Rawahy ◽  
S.M.E. Satti ◽  
M. V. Lopez
Keyword(s):  
Fruit Quality ◽  
Tomato Fruit ◽  
Titratable Acidity ◽  
Total Solid ◽  
Fruit Yield ◽  
Soluble Solids ◽  
Quality Enhancement ◽  
Tomato Fruits ◽  
Nacl Concentration

The effect of a saline nutritional regime on tomato (Lycopersicon esculentum Mill.) fruit yield and fruit quality enhancement for five cultivars (CLN 425, Pearson, Napoli, Hymar, and Sierra) was studied. The saline nutrient treatment consisted of (i) a control. Hoagland's solution (EC=2.5 mScm -1), (ii) Hoagland's solution + 50 mM NaCl (EC=7.46 mScm-1), (iii) Hoagland's solution + 50 mM NaCl + 4 mM K2SO4 + 2 mM H3PO4 (EC=8.31mScm-1), (iv) same as in (iii)3 but applied when plants were at 50% flowering, then the plants were irrigated with Hoagland’s solution as in the control, and (v) same as in (iii) until the plans were at 5096 flowering, thereafter NaCl concentration was reduced to 25mM (EC=5.87 mscm-1). Plans were seven weeks old at the start of the saline treatments. Each plant was in PVC cylindrical pots (15 cm diameter and 27 cm height) containing washed quartz sand. Fruits were harvested once weekly for ten weeks at incipient red. The control gave a higher fruit  yield than the saline treatments. However, the tomato fruits from thesaline treatments had higher titratable acidity, higher total soluble solids, and higher total solid indicating better quality of the fruits than those from the control. Of the five cultivars studied, Hymar had the highest fruit yield followed by Pearson. Hymar’s quality was also highest, followed by CLN 425. Napoli was the most susceptible to salinity and Sierra had the lowest quality.

scholarly journals Initial Crown Diameter Influences on the Fruit Yield and Quality of Strawberry Pircinque

Agronomy ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 184
Author(s):  
Antonio Felippe Fagherazzi ◽  
Daniel Suek Zanin ◽  
Marllon Fernando Soares dos Santos ◽  
Juliana Martins de Lima ◽  
Paola Daiane Welter ◽  
...  
Keyword(s):  
Experimental Design ◽  
Fruit Quality ◽  
Titratable Acidity ◽  
Physicochemical Characteristics ◽  
Soluble Solids ◽  
Productive Performance ◽  
Crown Diameter ◽  
Short Day ◽  
Yield And Quality

In strawberry production, the combination of a high productive performance and fruits with desirable physicochemical characteristics requires the use of plants with a good quality and high initial vigor. This study aimed to evaluate the effect of plants with different crown diameters on the productive performance and fruit quality of strawberry plants of the cultivar ‘Pircinque’ (Short Day). The study was conducted in two evaluation cycles (2016/2017 and 2017/2018). The experimental design was divided into randomized blocks, with four repetitions, and plots consisting of 20 plants. This study evaluated the crown diameters of plants of 5, 7, 9, 11, 13, 15, 17, and 19 mm. The productivity and number of fruit values increased significantly by 57% with larger caliber plants, which also provided precocity of productivity. The use of more vigorous plants also favored the production of fruits with higher soluble solids/titratable acidity ratios (+28%) and with epidermis coloration closer to intense red (−4.3%). For the cultivar ‘Pircinque’, plant crown diameters between 15 and 17 mm are the most favorable because they condition the best productive performances in combination with precocity and a good fruit quality.

scholarly journals Postharvest quality of tomato as affected by nitrogen and sulfur interaction

2020 ◽  
Vol 69 (2) ◽  
pp. 130-135
Author(s):  
Matias Siueia Júnior ◽  
Maria Ligia de Souza Silva ◽  
Anderson Ricardo Trevizam ◽  
Valdemar Faquin ◽  
Deivisson Ferreira da Silva
Keyword(s):  
Vitamin C ◽  
Fruit Quality ◽  
Tomato Fruit ◽  
Beta Carotene ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Postharvest Quality ◽  
Solanum Lycopersicum L ◽  
Randomized Design

Nitrogen (N) and sulfur (S) are nutrients that, in addition to influencing plant growth and production, interfere with processes related to postharvest fruit quality. In the present study, N x S interaction was evaluated in the postharvest quality of tomato (Solanum lycopersicum L.). The experiment was conducted in a greenhouse using 5 dm3 capacity vessels containing a 0-20 cm layer of a dystropherric Red Latosol. A 5 x 3 factorial design was used, with combinations of five doses of N (0, 100, 200, 300 and 400 mg dm-3) and three doses of S (0, 60 and 120 mg dm-3) distributed in a completely randomized design, with four repetitions. After harvest, the attributes of fruit quality were evaluated: firmness, pH, soluble solids (SS), titratable acidity (AT), soluble solids ratio and titratable acidity (SS / AT), vitamin C, lycopene and beta-carotene. An increase in firmness was observed, as well as the content of soluble solids, titratable acidity and the SS / AT ratio of the fruits as a result of the interaction N x S. However, this interaction favoured the reduction of the contents of vitamin C, lycopene and beta-carotene, and the quality characteristics of tomato fruit in relation to the recommended values. Only the increasing doses of N favoured a higher pH in the tomato fruits.

scholarly journals Preliminary Insights in Sensory Profile of Sweet Cherries

Foods ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 612
Author(s):  
Vânia Silva ◽  
Sandra Pereira ◽  
Alice Vilela ◽  
Eunice Bacelar ◽  
Francisco Guedes ◽  
...  
Keyword(s):  
Sweet Cherry ◽  
Prunus Avium ◽  
Sugar Content ◽  
Principal Component ◽  
Titratable Acidity ◽  
Physicochemical Characteristics ◽  
Quality Parameters ◽  
Sensory Profile ◽  
Soluble Solids ◽  
Sensory Data

Sweet cherry (Prunus avium L.) is a fruit appreciated by consumers for its well-known physical and sensory characteristics and its health benefits. Being an extremely perishable fruit, it is important to know the unique attributes of the cultivars to develop cultivation or postharvest strategies that can enhance their quality. This study aimed to understand the influence of physicochemical characteristics of two sweet cherry cultivars, Burlat and Van, on the food quality perception. Several parameters (weight, dimensions, soluble solids content (SSC), pH, titratable acidity (TA), colour, and texture) were measured and correlated with sensory data. Results showed that cv. Van presented heavier and firmer fruits with high sugar content. In turn, cv. Burlat showed higher pH, lower TA, and presented redder and brightest fruits. The principal component analysis revealed an evident separation between cultivars. Van cherries stood out for their sensory parameters and were classified as more acidic, bitter, and astringent, and presented a firmer texture. Contrarily, Burlat cherries were distinguished as being more flavourful, succulent, sweeter, and more uniform in terms of visual and colour parameters. The results of the sensory analysis suggested that perceived quality does not always depend on and/or recognize the quality parameters inherent to the physicochemical characteristics of each cultivar.

scholarly journals Fruit quality of ‘Eva’ e ‘Princesa’ apples grown under nitrogen fertigation in semiarid climate

2015 ◽  
Vol 19 (10) ◽  
pp. 967-972 ◽  
Author(s):  
João M. de S. Miranda ◽  
Ítalo H. L. Cavalcante ◽  
Inez V. de M. Oliveira ◽  
Paulo R. C. Lopes ◽  
Joston S. de Assis
Keyword(s):  
Fruit Quality ◽  
Skin Color ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Economic Viability ◽  
Fruit Firmness ◽  
Fruit Characteristics ◽  
Apple Cultivars ◽  
Fruit Mass

ABSTRACTThe production of high quality fruits is a necessary factor for the adaptation and production of plant species with economic viability. Thus, an experiment was conducted from July 2012 to January 2013 to evaluate the fruit quality of the ‘Eva’ and ‘Princesa’ apple cultivars as a function of nitrogen fertilization in Petrolina, PE, Brazil. The experimental design consisted of randomized blocks, with treatments distributed in a factorial arrangement 2 x 4, corresponding to apple cultivars (Eva and Princesa) and nitrogen doses (40; 80; 120 and 160 kg of N ha-1), with four replications and three plants in each plot. The fruit characteristics, such as fruit mass, skin color (luminosity, chromaticity, and colour angle), size (width and length), pulp firmness, titratable acidity (TA), soluble solids (SS) and the SS/TA ratio, were recorded. Nitrogen doses do not affect fruit quality of studied apple cultivars. The fruit quality attributes are different between apple cultivars: fruit firmness, SS/TA ratio, fruit mass and fruit diameter are superior for Princesa cultivar, while the fruit length for Eva cultivar is superior.

scholarly journals The Effect of Salinity on Fruit Quality and Yield of Cherry Tomatoes

Horticulturae ◽  
2022 ◽  
Vol 8 (1) ◽  
pp. 59
Author(s):  
Carlos Agius ◽  
Sabine von Tucher ◽  
Wilfried Rozhon
Keyword(s):  
Sodium Chloride ◽  
Fruit Quality ◽  
Plant Pathogens ◽  
Titratable Acidity ◽  
Sodium Content ◽  
Soluble Solids ◽  
Glucose Levels ◽  
High Concentrations ◽  
Cherry Tomatoes

Hydroponic cultivation of vegetables avoids problems with soil-borne plant pathogens and may allow higher yield. In arid climates and particularly on islands, high concentrations of sodium chloride can be present in the groundwater. For instance, in many sites of Malta, the groundwater contains more than 10 mM sodium chloride. Here we investigated the effects of sodium chloride at levels typically found in Malta on yield, physiology and fruit quality of tomato, the economically most important vegetable. We selected cherry tomatoes since their production is attractive due to their high marketing value. While the yield declined at higher salinity levels tested (17 and 34 mM), the quality increased significantly as indicated by higher total soluble solids and fructose and glucose levels. The type of substrate—coco peat, perlite or Rockwool—had only minor effects. Although the concentration of citric acid and malic acid remained unaffected, the pH dropped by approximately 0.1 unit and the titratable acidity increased slightly. This might be explained by a high uptake of chloride but a lower increase of the sodium content and a reduced potassium level in the fruits, shifting the equilibrium of the organic acids more to their protonated forms. Proline increased significantly, while the level of glutamic acid, which is crucial for the taste, remained unchanged. Our results show that cherry tomatoes can be cultivated in nutrient solutions prepared with salt-containing groundwater, as found in Malta. The yield declined to some extent but the quality of the produced fruits was higher compared to cultivation in salt-free media.

scholarly journals Quality of Tomato (Solanum lycopersicum L.) Due to Grafting in Solanaceae of Different Species

2019 ◽  
Vol 11 (3) ◽  
pp. 188
Author(s):  
João Lucas Moraes Vieira ◽  
Rogério Eiji Hanada
Keyword(s):  
Block Design ◽  
Tomato Fruit ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Control Treatment ◽  
Tomato Cultivar ◽  
Tomato Crop ◽  
Significant Difference ◽  
Four Blocks

The present work had as objective to evaluate the physical-chemical characteristics of commercial tomato fruits grafted on different solanaceous species. The experiment was conducted in a greenhouse, in a randomized complete block design, with four blocks and six treatments, being the rootstocks: cocona (Solanum sessiliflorum); two cultivars of eggplant (Solanum aethiopicum), Long Light Green and Big Hill; jurubebão (Solanum lycocarpum) and jurubeba juna (Solanum stramonifolium), grafted with the tomato cultivar Santa Cruz Kada, and the control treatment was represented by the self-grafted tomato. Three consecutive harvests were spaced seven days after the production stabilization, and the characteristics fruits analyzed were Total Soluble Solids (ºBrix), pH, Titratable Acidity (percentage of citric acid) and TSS/TA. A statistically significant difference was found in the Tukey’s test at 5% probability in the titratable acidity, pH and fruit pulp flavor, among the evaluated treatments, while the soluble solids content did not differ between treatments in any of the harvests, but the values remained within the considered adequate for the tomato in natura in the current literature. There was a decrease in fruit flavor in all treatments, and fruit pH drop in all treatments with the exception of jurubebão, with the advancement of plant age, while the titratable acidity had an inverse behavior. The evaluated rootstocks can be used in the tomato crop, without prejudice to the quality of the tomato fruit produced.

scholarly journals FOLIAR APPLICATIONS OF ZINC, IRON AND MANGANESE INFLUENCE THE PLANT GROWTH AND FRUIT QUALITY OF PAPAYA CV. RED LADY

2020 ◽  
Vol 8 (5) ◽  
pp. 551-557
Author(s):  
Gurjot Singh Pelia ◽  
◽  
A K Baswal ◽  
Keyword(s):  
Plant Growth ◽  
Fruit Quality ◽  
Foliar Application ◽  
Ascorbic Acid Content ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Total Carotenoids ◽  
Heavy Soil

Prevalence of heavy soil is a major problem for fruit cultivation under Punjab conditions consequently leading to deficiency of several micro-nutrients including zinc (Zn), iron (Fe), and manganese (Mn) which adversely affects the growth and productivity. In this view, a study was planned to investigate the effect of foliar applications of zinc sulphate (ZnSO4), iron sulphate (FeSO4), and manganese sulphate (MnSO4) on vegetative growth, reproductive growth and fruit quality of papaya cv. Red lady. Plants sprayed with ZnSO4 (0.4 %) exhibited significantly highest plant height, plant girth, number of leaves, petiole length; initiated an earliest flowering and fruiting; and improved fruit quality viz., fruit weight, fruit length, titratable acidity, soluble solids concentrations, ascorbic acid content, total phenols content, and total carotenoids content as compared with the control and all other treatments. In conclusion, foliar application ZnSO4 (0.4 %) significantly improved plant growth and fruit quality in papaya cv. Red lady.

Sign in / Sign up

Export Citation Format

Share Document