APPLICATION OF THE ACTIVE BRAZING METHOD FOR CONNECTING FIBER MATERIALS WITH CERAMIC MATERIALS (rеview)

2020 ◽  
pp. 63-72
Author(s):  
E.I. Krasnov ◽  
◽  
E.I. Kurbatkina ◽  
A.A. Shavnev ◽  
V.M. Serpova ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Zirconium Dioxide ◽  
Basic Problem ◽  
Ceramic Materials ◽  
High Quality ◽  
Factors Affecting ◽  
Effect Of Additives ◽  
Fiber Materials ◽  
Relationship Of ◽  
The Relationship

Рresents a review of the application of the active brazing method for joining fibrous compo-site materials based on titanium alloy with ceramics based on aluminum oxide and zirconium dioxide. The basic problem arising from the combination of metals and ceramics, examples of solving problems compounds represented by the relationship of the microstructure of the connection zone with mechanical properties and shows the effect of additives Ti, B and W on microstructure and mechanical properties. Conclusions are made about the possibility of obtaining high-quality and durable compounds and factors affecting them.

scholarly journals 86 Factors affecting beef calf vigor at birth: Dam peripartum body condition score, calving season, and calf size

2020 ◽  
Vol 98 (Supplement_3) ◽  
pp. 3-3
Author(s):  
Lindsey G Wichman ◽  
Colby A Redifer ◽  
Natalie B Duncan ◽  
Craig A Payne ◽  
Allison M Meyer
Keyword(s):  
Mixed Model ◽  
Body Condition Score ◽  
Negative Relationship ◽  
Beef Cows ◽  
Abdominal Girth ◽  
Factors Affecting ◽  
Condition Score ◽  
Calving Season ◽  
Relationship Of ◽  
The Relationship

Abstract To determine effects of cow BCS and calving season on calf vigor and size and the relationship of calf size with vigor, 310 multiparous and primiparous beef cows (age: 4.6 ± 2.2 yr; BW: 663 ± 86 kg; BCS: 5.3 ± 0.6) from 3 spring (2015, 2016, 2017) and 4 fall (2015, 2017, 2018, 2019) calving seasons were observed during parturition. Time to stand (n = 191) was determined as minutes from birth to standing successfully for 5 sec. Within 24 h, calf BW (n = 187) and size [shoulder to tailhead length (STL), heart girth (HG), and abdominal girth (AG; n = 154)] were recorded. Data were analyzed using a mixed model containing effects of calving season (spring and fall), BCS category (< 5, =5, ≥6), and their interaction. Correlations were determined between time to stand and calf measurements separately for spring (n = 79) versus fall (n = 111). Cows with BCS < 5 gave birth to lighter (P = 0.02) calves that tended to have a faster (P ≤ 0.13) time to stand than =5 and ≥6. Calves from cows with BCS ≥6 tended to have greater (P ≤ 0.09) STL than =5 and < 5. Calves from cows with BCS < 5 had smaller (P = 0.13) HG than =5. Fall-born calves tended to have smaller (P ≤ 0.06) BW, HG, and AG than spring-born calves. Within fall calves, there tended to be a positive relationship (r = 0.16; P = 0.09) between time to stand and calf BW. Despite this, spring calves had a negative relationship (r = -0.26; P = 0.02) between time to stand and calf BW. In conclusion, cow BCS and calving season affect calf size and may affect calf vigor. These data suggest that calving season may dictate the relationship between calf vigor and size.

scholarly journals A STUDY OF FACTORS AFFECTING THE FLUIDITY OF CEMENT

2019 ◽  
pp. 8-16
Author(s):  
Л. Шахова ◽  
L. Shakhova ◽  
Е. Черноситова ◽  
E. Chernositova ◽  
Л. Щелокова ◽  
...  
Keyword(s):  
Labor Costs ◽  
Factors Affecting ◽  
Correlation And Regression Analysis ◽  
Cement Powder ◽  
Production Factors ◽  
Variable Factor ◽  
Cement Binder ◽  
Cement Grinding ◽  
Relationship Of ◽  
The Relationship

The fluidity of cement powder has a significant impact on the duration and labor costs in the process of transportation and shipment of cement. This determines the relevance of the task of finding mechanisms to control this parameter. During the production process, the fluidity of the cement powder is formed depending on the properties of the initial cement charge, the requirements for the thinness of the grinding to the finished product, the hardware design and the conditions of the process. In turn, the fluidity of cement affects the grinding process and the productivity of the mill. The rheological characteristics of the cement binder change over time depending on the physical properties of the material, environmental conditions and the equipment used for its storage. The reasons for the deterioration of the flow of cement powder is still not fully studied. The article is devoted to the study of the main factors affecting the fluidity of cement. The results of the statistical analysis of cement fluidity depending on the thinness of cement grinding (on the residue on the sieve №008 and the specific surface area by Blaine method) humidity, bulk weight and weight in the most compacted state. In addition, the relationship of production factors and cement fluidity is considered. Correlation and regression analysis shows that the fluidity is affected by a variable factor, which is not yet quantified.

scholarly journals The Development of Snow and Glacier Research in Switzerland

1948 ◽  
Vol 1 (04) ◽  
pp. 192-201 ◽  
Author(s):  
R. Haefeli
Keyword(s):  
Mechanical Properties ◽  
Snow Cover ◽  
Laboratory Experiments ◽  
Relationship Of ◽  
The Relationship ◽  
Research Institute

The evolution of snow and glacier research in Switzerland is outlined. The settling, creep, viscosity and slipping of the snow cover are discussed in detail and the relationship of these comparatively simple processes to the more complex movements in a glacier are described. The importance of further research in glacier physics in connection with the crystallographic and mechanical properties of ice is stressed; certain preliminary laboratory experiments and some subjects for further research in the field are suggested. The Great Aletsch Glacier is recommended for this owing to the proximity of the Jungfraujoch Research Institute and facilities for transport by the Jungfraujoch Railway.

The Relationship of Previous Breastfeeding Experiences and Factors Affecting Breastfeeding Rates: A Follow-Up Study

2020 ◽  
Vol 15 (12) ◽  
pp. 789-797
Author(s):  
Jun-Yan Li ◽  
Yi Huang ◽  
Hao-Qi Liu ◽  
Jing Xu ◽  
Lu Li ◽  
...  
Keyword(s):  
Factors Affecting ◽  
Follow Up Study ◽  
Breastfeeding Rates ◽  
Relationship Of ◽  
The Relationship

scholarly journals Issues of wind mode visualization and pedestrian comfort assessment when designing residential buildings on sloping territories in the Arctic zone

2019 ◽  
Vol 64 ◽  
pp. 03013 ◽  
Author(s):  
Ilya V. Dunichkin ◽  
Emanuele Naboni ◽  
Anna E. Korobeinikova ◽  
Olga I. Poddaeva
Keyword(s):  
Urban Areas ◽  
Residential Buildings ◽  
The Arctic ◽  
Wind Regime ◽  
Local Climate ◽  
Factors Affecting ◽  
Aerodynamic Roughness ◽  
The Stability ◽  
Relationship Of ◽  
The Relationship

Subject of research: visualization of the wind regime of residential buildings on the slope area in the Arctic. Goals: the purpose of the study is to identify the problems of visualization of the wind regime on the slopes and the analysis of patterns of airflow around the sloping territories, affecting the comfort of pedestrians. Materials and methods: airflow patterns of slope areas with different characteristics and comfort assessment for humans are analyzed in the course of work. Geotechnical methods are presented in solving the problems of wind erosion and the stability of hillsides and complex terrain within the city limits. Results: The importance and novelty of the research in studying the relationship of slope geometry and environmental quality, as a decrease in comfort inevitably leads to a decrease in the development of nearby urban areas in settlements on the coast of the Arctic Ocean, problems with climate and local climate, as well as a decrease in the quality of life of people. The article considers the relationship of plastic relief with the aeration regime of the territory, the dependence of aerodynamic roughness on their height, features of aeration of the slope and hilly terrain, factors affecting the direction and speed of the wind and methods for studying the aeration regime of slope areas. Findings: The possibilities of applying existing approaches to research and visualization for slope areas are demonstrated. The direction of development of the technique for visualization of slope areas has been determined.

Chondrilla juncea L. in Australia. I. Some factors affecting flowering

1966 ◽  
Vol 17 (4) ◽  
pp. 457 ◽  
Author(s):  
EG Cuthbertson
Keyword(s):  
Dark Period ◽  
Critical Factor ◽  
Photoperiodic Response ◽  
Day Length ◽  
Floral Initiation ◽  
Factors Affecting ◽  
Two Stages ◽  
Relationship Of ◽  
The Relationship ◽  
Chondrilla Juncea

The interaction between day length and vernalization, and the influence of growth temperature on flowering, in Chondrilla juncea L. (skeleton weed) have been studied. Bolting and floral initiation in unvernalized plants were suppressed in a 9-hr photoperiod. Increasing the photoperiod beyond 12 hr resulted in progressively earlier bolting and floral initiation, the critical day length being slightly less than 12 hr. Interrupting a 16-hr dark period by 1 hr of low-intensity light near its centre caused some plants to flower. Prior vernalization further accelerated bolting and flowering and reduced the dependence on day length. Vernalization, however, was not an obligate requirement. Post-bolting development was favoured by high temperatures. It was concluded that flowering in skeleton weed occurred in two stages. The first or photo-inductive phase was controlled by at least two partial processes. These were vernalization and a photoperiodic response in which the length of the dark period was the critical factor. The relationship of the flowering processes to the distribution of skeleton weed in Australia is discussed briefly.

The relationship of skin follicle development to growth rate in sheep.

1955 ◽  
Vol 6 (2) ◽  
pp. 308 ◽  
Author(s):  
PG Schinckel
Keyword(s):  
Growth Rate ◽  
Birth Weight ◽  
Growth Conditions ◽  
Considerable Importance ◽  
Follicle Development ◽  
Factors Affecting ◽  
Relationship Of ◽  
The Relationship

Observations are reported on factors affecting the ratio of secondary to primary follicles (SJP) in a flock of Merino sheep.It was found that all follicles were initiated prior to birth but that the number which finally came to maturity (production of fibre) was significantly affected by birth weight and growth from birth to 1 month. Growth at later ages appeared to be unimportant. There was a significant correlation (r = +0.29) between birth weight and log potential S/P at birth. This is interpreted to indicate that while pre-natal growth conditions affect the number of follicles initiated, other factors are also of considerable importance. It is concluded that the larger animals at birth also have a greater total number of primary follicles than smaller animals. It is further concluded that this difference in total primary follicles results primarily from differences in size a t the 90th day of pre-natal life rather than from differences in density a t that time.

Influence of Social Media Marketing on the Brand Image of Organizations in the Hospitality Industry of Sri Lanka

2016 ◽  
Vol 7 (1) ◽  
pp. 30-41 ◽  
Author(s):  
Graham Romello Perera ◽  
Irosha Perera
Keyword(s):  
Social Media ◽  
Hospitality Industry ◽  
Brand Image ◽  
Social Media Marketing ◽  
Primary Data ◽  
Factors Affecting ◽  
The Social ◽  
Social Media Platforms ◽  
Relationship Of ◽  
The Relationship

The research paper aims to identify significant factors affecting towards the Social Media Marketing which can influence and affect the Brand Image of organizations in the hospitality sector. The identified factors include the following; 1. Positivity, 2. Consistency, 3. Differentiation, 4. Personality, and 5. Engagement Opportunities on Social Media. A framework was developed to highlight the relationship of the factors and their direct influence and impact on the Brand Image. A questionnaire is used to obtain primary data, and the data is analysed using a variety of statistical tools to measure and evaluate the strength of the influence and impact of Social Media Marketing on Brand Image of Hospitality Brands. Assessing the influence and impact of Social Media Marketing on their Brand Image can help organizations in the hospitality industry to evaluate the success of their Social Media Marketing Campaigns, while organizations that are currently not engaged in Social Media Marketing can gain a better understanding on how to utilize Social Media platforms to enhance their Brand Image.

Effect of Sintering Temperature on Microstructure and Properties of VС/Fe Composite

2012 ◽  
Vol 430-432 ◽  
pp. 978-983
Author(s):  
Guo Jun Zhang ◽  
Zhi Ping Sun ◽  
Li Yan Zou
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Sintering Temperature ◽  
Growth Trend ◽  
Flexure Strength ◽  
Microstructure And Properties ◽  
Whole Process ◽  
Relationship Of ◽  
The Relationship ◽  
Composite Samples

VC/Fe composite samples were fabricated by sintering at 1050, 1100 and 1150°C in vacuum. The microstructure and mechanical properties of samples were examined, and the relationship of structure and mechanical properties for VC/Fe composite sintered at different temperature were studied. The results show that fracture toughness, hardness and density is increasing obviously at 1050-1100°Cwith the increasing sintering temperature, but the growth trend increases slowly at 1100-1150°C; in whole process with temperature increased, Flexure strength heighten trend obviously. The microstructure of VC/Fe composite changed from particles piled up together to the microstructure particles closely, VC particles set gradually into Fe with temperature increased, and the gap reduced gradually.

Nylon 66 / Nomex Composite Yarn Performance Analysis

2014 ◽  
Vol 568-570 ◽  
pp. 1671-1674
Author(s):  
Gen Yang Cao ◽  
Dan Sheng ◽  
Kai Yang ◽  
Xue Feng Lu ◽  
Wei Lin Xu
Keyword(s):  
Mechanical Properties ◽  
Cluster Analysis ◽  
Performance Analysis ◽  
Confidence Interval ◽  
Polyamide 66 ◽  
Nylon 66 ◽  
Composite Yarn ◽  
Significant Difference ◽  
Relationship Of ◽  
The Relationship

The embedded composite spinning technology was applied in spinning the composite yarn of polyamide 66 and nomex .The relationship of the polyamide 66 and nomex’s content with the mechanical properties of composite yarn and hairiness was discussed. The method of cluster analysis was applied in analyzing the four kinds of yarn’s mechanical properties. And the results show that when the confidence interval is 95%, the significance of two kinds yarns were greater than 0.05. There is no significant difference between the programs. While the analysis of the hairiness data showed that the fourth solution’s harmful hairiness was much lower that the first solution’s. Therefore, the best solution is the fourth solution.

Sign in / Sign up

Export Citation Format

Share Document