scholarly journals Characteristics of VNIISPK apple cultivars on semi-dwarf rootstock 54-118

2020 ◽  
pp. 60-64
Author(s):  
A. M. Galasheva ◽  
N. G. Krasova ◽  
Z. E. Ozherelieva
Keyword(s):  
Frost Resistance ◽  
Control Level ◽  
Projection Area ◽  
Cross Sectional ◽  
Crown Volume ◽  
Russian Research Institute ◽  
Apple Cultivars ◽  
Hardened State ◽  
Crown Projection Area ◽  
And Control

Relevance. Due to the wide diversity of cultivars and rootstocks, the selection of more productive, commercial and adapted graft-rootstock combinations for industrial orchards in the Orel region and the entire Central Chernozem region is relevant.Materials and methods. The studies were carried out at the Russian Research Institute of Fruit Crop Breeding (VNIISPK) on the bases of the laboratory of cultivar study and cultivar agrotechnics of pome crops and the laboratory of physiology of fruit plant resistance. Winter apple cultivars of VNIISPK breeding ‘Sinap Orlovsky’, ‘Veteran’, ‘Orlik’, ‘Rozhdestvenskoye’, ‘Svezhest’, ‘Bolotovskoye’, ‘Veniaminovskoye’ and control cultivar ‘Antonovka Obyknovennaya’ on the vegetatively propagated semi-dwarf rootstock 54-118 were taken as objects of the studies. The orchard was planted in autumn 2013, the planting scheme was 6 mx3m.Results. The studied apple cultivars have good compatibility with 54-118 rootstock, provide good tree development and low-sized crown. The highest yield on average for three years was in scab-immune apple cultivars ‘Bolotovskoye’ (4.6 t/ha), ‘Rozhdestvenskoye’ (3.4 t/ha) and ‘Venyaminovskoye’ (3.2 t/ha). The highest indicators for the load of the crop on the crown volume, crown projection area, and cross-sectional area of the stem were for ‘Svezhest’ and ‘Bolotovskoye’. As a result of determining the frost resistance of apple cultivars in mid-January to temperatures up to -38...-40°C, it was revealed that in the hardened state, the cultivars showed frost resistance of buds and tissues of annual shoots with reversible damage at -38°C in the middle of winter. A decrease in temperature to -40°C in January increased damage to buds and wood in the studied varieties, while the bark was characterized by greater frost resistance. According to the degree of damage to the cortex in January, when the temperature dropped to -40°C, ‘Rozhdestvenskoye’, ‘Svezhest’, and ‘Sinap Orlovsky’ were at the control level.

TRIPLOID APPLE VARIETIES OF SUMMER RIPENING SELECTION VNIISPK ON CLONAL ROOTSTOCK 54-118

1970 ◽  
pp. 34-36
Author(s):  
А. M. Galasheva ◽  
Е. N. Sedov
Keyword(s):  
Tree Height ◽  
Projection Area ◽  
Cross Sectional ◽  
Crown Width ◽  
Crown Volume ◽  
The World ◽  
Apple Cultivars ◽  
Crown Projection Area ◽  
Academy Of Sciences ◽  
First Time

For the first time in the world and in Russia, Academician of the Russian Academy of Sciences, breeder Evgeny Nikolaevich Sedov created a series of triploid apple cultivars from intervalent crosses 2х × 4х. Triploid apple cultivars bear fruit more regularly, have higher self-fruitfulness and have fruits of high marketability. The article presents data on the study of triploid apple cultivars of the summer ripening period of the VNIISPK breeding - Augusta, Daryona, Maslovskoye, Osipovskoye, Zhilinskoye, Spasskoye and Yablochny Spas as well as the control Canadian cultivar Melba on a semi-dwarf clone rootstock 54-118. Maslovskoye, Zhilinskoye, Spasskoye and Yablochny Spas have immunity to scab. The orchard was planted in 2014, the garden planting scheme was 5 x 2 m. The indicators of the growth force (tree height, crown width and stem diameter) and the yield of trees were studied. At the age of six, the trees of triploid cultivars reached a height of 2.2 m (Maslovskoye) to 3.0 m (Yablochny Spas) on a semi-dwarf rootstock 54-118. The highest indicators of crown volume (3.3-5.3 m3), crown projection area (4.2-5.3 m2) and the cross-sectional area of the stem (46.5-52.8 cm2) were in Osipovskoye, Yablochny Spas, Zhilinskoye and Spasskoye. The highest yield in an average of three years was given by triploid scab-immune apple cultivars on a semi-dwarf rootstock 54-118: Maslovskoye, Zhilinskoye, Spasskoye and Yablochny Spas.

Crown structure of European beech (Fagus sylvatica L.): a non-causal proxy for mechanical–physical wood properties

2020 ◽  
Author(s):  
Andreas Rais ◽  
Martin Jacobs ◽  
Jan-Willem G. van de Kuilen ◽  
Hans Pretzsch
Keyword(s):  
Fagus Sylvatica ◽  
Laser Scanning ◽  
European Beech ◽  
Wood Properties ◽  
Projection Area ◽  
Mixed Stands ◽  
Crown Volume ◽  
Crown Structure ◽  
Crown Morphology ◽  
Crown Projection Area

The current tendency towards the silvicultural promotion of mixed tree species has increased the variability in the crown structure within stands. This study shows how neighbouring trees can influence both the external crown features and internal wood properties of trees. Using terrestrial laser scanning, the crown features of 100 European beech trees, <i>Fagus sylvatica</i> L., from pure beech stands and mixed stands of beech with Douglas fir, Norway spruce, sessile oak and Scots pine were recorded. After felling and sawing, the dynamic modulus of elasticity was determined on 1623 boards from the two lower 4.1-m logs. Significant differences were found between beech trees from pure stands and those from beech–pine mixed stands in terms of crown volume (415 m<sup>3</sup> vs 766 m<sup>3</sup>), crown ratio (50.0% vs 71.5%), crown projection ratio (0.182 m cm<sup>−1</sup> vs 0.253 m cm<sup>−1</sup>) and branch angle (30.7° vs 54.1°). Multiple regression mixed models revealed significant relationships between timber stiffness and crown volume (-1.7 N mm<sup>−2</sup> m<sup>−3</sup>), crown ratio (-28.4 N mm<sup>−2</sup> %<sup>−1</sup>) and crown projection area (-9835 N mm<sup>−2</sup> m<sup>−1</sup> cm). Thus, the crown morphology of broad-leaved species reflects the tree’s long-term competitive status and suggests indicators for the assessment of mechanical–physical wood properties.

Prevalence, associated factors, and control level of asthma symptoms among adolescents in Northern Jordan

2018 ◽  
Vol 0 (0) ◽  
Author(s):  
Nihaya A. Al-sheyab ◽  
Mahmoud A. Alomari
Keyword(s):  
High School Students ◽  
Associated Factors ◽  
Control Level ◽  
Management Program ◽  
School Students ◽  
Asthma Control Test ◽  
Cross Sectional ◽  
Asthma Symptoms ◽  
And Control ◽  
Northern Jordan

AbstractObjectiveTo investigate the prevalence, associated factors, and control level of asthma in Jordanian high school students.MethodsA descriptive, comparative, cross sectional design was used and a cluster sample of 2691 students (mean age = 14.5 years, 51.0% girls), drawn from eight randomly selected public high schools in Northern Jordan, participated in the study. Each student had the International Study of Asthma and Allergies in Childhood (ISAAC) questionnaire completed in the classroom between February and May, 2015.ResultsThe prevalence of recent wheezing in the last 12 months was 11.7% whereas the prevalence of diagnosed asthma was 6.2%. About 49% of students experienced cough all the time, and 33.5% experienced waking up at night due to wheezing some of the time. About 30.9% of students reported moderate to big exercise-induced asthma. The mean total Asthma Control Test (ACT) score was 5.85 (SD = 3.56) with all of students reporting uncontrolled asthma during the last month. Higher rates of asthma symptoms were reported by females, 10th graders, and students with negative family history. Importantly, students with diagnosed asthma or recent wheezing reported higher rates of ever smoking tobacco vs. non-asthmatics (p < 0.000); dual (18.6% vs. 9.8%), cigarettes only (11.2% vs. 7.3%), and waterpipe only (18.0% vs. 14.7%).ConclusionOverall, students with asthma or wheezing had increased rates of tobacco smoking. Policies need to be set and enforced to provide a better environment for these youth, especially making all schools smoke-free zones. A multifaceted, comprehensive awareness and management program is required in schools to control and manage asthma symptoms.

scholarly journals Assessment of suitability of apple varieties for intensive technologies in the conditions of the Northern Precaspian

2020 ◽  
pp. 22-23
Author(s):  
Marina Gennadievna Kostenko
Keyword(s):  
Comparative Study ◽  
Cross Section ◽  
Unit Area ◽  
Climatic Conditions ◽  
Projection Area ◽  
Maximum Productivity ◽  
Apple Varieties ◽  
Crown Volume ◽  
Crown Projection Area ◽  
First Time

For the first time in the soil and climatic conditions of the Astrakhan region, a comparative study of biometric indicators, yield, productivity coefficient of 8 apple varieties grafted on a medium-sized stock 54-118 was carried out. It was found that the highest crown parameters were characteristic of the Gala Kub variety (10 m3 crown volume and 7.5 m2 crown projection area), the smallest - the Prikubanskoe, Lambourne and Vainspur varieties (2.3 ... 3.0 m3 and 3.2 ... 3.3 m2, respectively), which ensures denser placement of trees of these varieties in the garden. In terms of productivity, the varieties Pamyat Esaulu, Prikubanskoe, Vainspur, Zolotaya Korona, Renet Kubansky (25.8 ... 32.8 kg / village or 25.8 ... 32.8 t / ha) stood out. The Prikubanskoe variety (9.60 kg / m2, 13.08 kg / m3, 0.62 kg / cm2, respectively) was distinguished by the maximum productivity (kg) per unit of projection area and crown volume, area of the transverse stem. High coefficients of productivity per unit area of the cross-section of the trunk (0.49 ... 0.54 kg / cm2) were found in varieties Vainspur, Pamyat Esaulu and Renet Kubansky.

Study of maximum frost resistance of cherry scion/stock combinations

2020 ◽  
Vol 60 (1) ◽  
pp. 62-67
Author(s):  
Z. E. Ozherelieva ◽  
A. S. Lyakhova
Keyword(s):  
Frost Resistance ◽  
Recovery Period ◽  
Winter Hardiness ◽  
Vegetative Buds ◽  
State Study ◽  
Russian Research Institute ◽  
Sweet Cherries ◽  
Hardened State ◽  
Artificial Freezing ◽  
Selection Of

The research was carried out on the basis of the laboratory of stability of physiology of fruit plants at All-Russian research Institute of Breeding of Fruit Crops in 2017-2018. The object of research was the scion/stock combinations of Novella and Turgenevka cherries/82987, C-2-180, 74332, 74340, 74336, 74324 breeding of the Institute. In the study of winter hardiness of cherry, special attention was paid to the ability of varieties to withstand low temperatures in mid-winter. The aim of the research was to study the maximum frost new scion/stock combinations of cherries by artificial freezing and selection of the hardiest of them. The results of the research noted that in the recovery period of organic dormancy in late December, when the cherry plants acquire the maximum hardened state, study scion/stock combinations were characterized by high resistance to frost of bark and wood of annual branches. They noted frost resistance of vegetative buds with reversible damage. Significant differences in the freezing vegetative buds, bark and wood between scion/stock combinations of sweet cherries are shown. Novella and Turgenevka cherry varieties on clonal rootstocks 74332, 74336, characterized by the greatest potential frost resistance of vegetative buds and tissues of annual branches at lower t= -35°C (winter hardiness component II) at the end of December. It is shown that all cherry scion/stock combinations have a low potential frost resistance of generative buds. After exposure to t= -35°C, living rudiments of flower buds preserved only in cherry scion/stock combinations Novella/74332, Turgenevka/74340, 74336 (from 4.0 to 15.4 %). According to the results of artificial freezing scion/stock combination Novella/74332 and Turgenevka / 74332, 74336 were revealed, which were characterized by the maximum frost resistance of generative, vegetative buds, bark and wood.

scholarly journals Mimosa scabrella Benth. planted for forest restoration in southern Brazil

2021 ◽  
Vol 10 (3) ◽  
pp. e33710312629
Author(s):  
Dionatan Gerber ◽  
Larissa Regina Topanotti ◽  
Oiliam Carlos Stolarski ◽  
Bruna Elisa Trentin ◽  
Marcos Felipe Nicoletti ◽  
...  
Keyword(s):  
Forest Restoration ◽  
Linear Models ◽  
Survival Rates ◽  
Information Criteria ◽  
Projection Area ◽  
High Survival ◽  
Total Height ◽  
Crown Volume ◽  
Collar Diameter ◽  
Crown Projection Area

Tropical trees planting resurgent in a global warming scenario, and this activity relies on information about forest species ecology and its different functional traits. we evaluated the initial performance of Mimosa scabrella using the Generalized Linear Models (GLM) technique to fit mathematical models for collar diameter growth x height, and for crown projection area x collar diameter in a forest restoration planting. The following variables were obtained in the first four years after planting: collar diameter (mm), total height (m), crown projection area (m²) and crown volume (m³). The models fitting was performed by GLM on Gamma, Normal and Poisson distribution, identity and logarithmical join function, and they were analyzed based on Akaike and Bayesian Information Criteria, standard deviation of the estimate and determination coefficient. M. scabrella showed an excelled performance on the 48 months of age, with average increment of 200.28 mm in collar diameter, 6.88 m in total height, 2.95 m² in crown projection area and 83.41 m³ in crown volume. Its growth reduced only on periods of frost occurrence, but it restarted after these climatic events.  The species growth, as well as its high survival rates and resprouting, allow its recommendation as a shady species of fast canopy fulfillment in forest restoration projects.

Genetic variation in tree structure and its relation to size in Douglas-fir. II. Crown form, branch characters, and foliage characters

1994 ◽  
Vol 24 (6) ◽  
pp. 1236-1247 ◽  
Author(s):  
J.B. St. Clair
Keyword(s):  
Genetic Variation ◽  
Leaf Area ◽  
Branch Length ◽  
Douglas Fir ◽  
Projection Area ◽  
Cross Sectional ◽  
Needle Size ◽  
Stem Size ◽  
Large Trees ◽  
Crown Projection Area

Genetic variation and covariation among traits of tree size and structure were assessed in an 18-year-old Douglas-fir (Pseudotsugamenziesii var. menziesii (Mirb.) Franco) genetic test in the Coast Range of Oregon. Considerable genetic variation was found for relative crown width; stem increment per crown projection area; leaf area and branch weight relative to crown size; branch diameter and length adjusted for stem size; branch stoutness; cross-sectional area of branches per crown length; and needle size. Little genetic variation was found for branch numbers per whorl, branch angle, and specific leaf area. At both the phenotypic and genetic level, large trees growing well relative to growing space had tall, narrow crowns, high leaf areas per crown projection area or branch length, greater partitioning to leaves versus branches, and stouter branches. Thus, large, efficient trees were those that invested more in the photosynthetic machinery of leaf area and the branch biomass necessary to support that leaf area, but distributed that leaf area over a greater vertical distance. Unfortunately, these traits also were associated with increased branchiness, and selection for these traits would be accompanied by reductions in harvest index and wood quality.

scholarly journals Low Temperature Tolerance of Apple Cultivars of Different Ploidy at Different Times of the Winter

2017 ◽  
Vol 71 (3) ◽  
pp. 127-131 ◽  
Author(s):  
Zoya Ozherelieva ◽  
Evgeny Sedov
Keyword(s):  
Frost Resistance ◽  
Cold Hardiness ◽  
Temperature Tolerance ◽  
Late Winter ◽  
Low Temperature Tolerance ◽  
Russian Research Institute ◽  
Apple Cultivars ◽  
Artificial Freezing ◽  
In The Beginning ◽  
Winter Buds

AbstractArtificial freezing was used to evaluate diploid and triploid apple cultivars from the All Russian Research Institute of Fruit Crop Breeding at Orel throughout three winters. The studied apple varieties were developed by breeder E. N. Sedov and cytological analysis was carried out by cytologist G. A. Sedysheva. In early winter, all cultivars exhibited high tolerance to cold. In mid-winter buds and wood were severely damaged, while bark was more resistant for most cultivars. Basic components of hardiness were estimated: component I - frost resistance at -25 °C in the beginning of winter; component II - maximum value of frost resistance at -40 °C developed by plants during hardening; component III - ability to retain the hardened condition at -25 °C after a period of three-day thaw at +2 °C; and component IV - the ability to restore frost resistance at -30 °C after repeated hardening and three-day thaw at +2 °C. During late-winter thaws, buds suffered from frosts, while the bark and wood retained frost hardiness. Late in winter all cultivars demonstrated high resistance to repeated frosts. Triploid cultivars exhibited the highest level of cold hardiness of vegetative buds, bark and wood of annual shoots throughout the winter; these cultivars included ‘Zhilinskoye’, ‘Vavilovskoye’, ‘Osipovskoye’, ‘Patriot’, ‘Sinap Orlovski’, ‘Spasskoye’, ‘Turgenevskoye’, and diploids ‘Bolotovskoye’, ‘Sokovinka’, and ‘’Ranneye Aloye’.

X-Ray Replication of Submicrometer Linewidth Patterns

1977 ◽  
Vol 35 ◽  
pp. 136-137
Author(s):  
Henry I. Smith ◽  
D.C. Flanders
Keyword(s):  
Electron Beam Lithography ◽  
Cross Sectional ◽  
X Ray ◽  
Electron Backscattering ◽  
Spatial Frequencies ◽  
Cross Sectional Profile ◽  
Carbon Foils ◽  
Sectional Profile ◽  
And Control ◽  
Soft Radiation

Scanning electron beam lithography has been used for a number of years to write submicrometer linewidth patterns in radiation sensitive films (resist films) on substrates. On semi-infinite substrates, electron backscattering severely limits the exposure latitude and control of cross-sectional profile for patterns having fundamental spatial frequencies below about 4000 Å(l),Recently, STEM'S have been used to write patterns with linewidths below 100 Å. To avoid the detrimental effects of electron backscattering however, the substrates had to be carbon foils about 100 Å thick (2,3). X-ray lithography using the very soft radiation in the range 10 - 50 Å avoids the problem of backscattering and thus permits one to replicate on semi-infinite substrates patterns with linewidths of the order of 1000 Å and less, and in addition provides means for controlling cross-sectional profiles. X-radiation in the range 4-10 Å on the other hand is appropriate for replicating patterns in the linewidth range above about 3000 Å, and thus is most appropriate for microelectronic applications (4 - 6).

Sign in / Sign up

Export Citation Format

Share Document