scholarly journals Hybrid drivetrain systems 48 V in rally cars

2021 ◽  
Author(s):  
Bartłomiej Urbański ◽  
Grzegorz Przybyła
Keyword(s):  
Regenerative Braking ◽  
Hybrid Drive ◽  
Advantages And Disadvantages ◽  
Working Groups ◽  
Harmful Substances ◽  
Drive Systems ◽  
High Level ◽  
Emissions Of Harmful Substances ◽  
Selection Of

The International Automobile Federation (FIA) over the last few years consistently implements the strategy of introducing hybrid and electric drivetrains to all motorsport competitions. The article discusses the implementation of a hybrid drivetrain system powered by 48V for such FIA rally cars groups like Rally2, Rally3 and Rally4 based on current discussions held at the FIA Technical Working Groups. The implementation of hybrid drive systems in rally cars was analysed in terms of their advantages and disadvantages. In the case of this application the important aspect is the assumption regarding an increase in performance, while keeping a high level of safety and reasonable costs. Additionally, the assumption is to reduce the emissions of harmful substances produced by rally cars. The article concludes selection of elements of the above-mentioned system for further reasearch were presented. An analysis and calculations of the energy recoverable from regenerative braking using the BISG on a given section of the rally were carried out. Conclusions were also drawn regarding further work that will be carried out to successfully implement the above-mentioned systems for rally cars.

scholarly journals The development of combustion engines for hybrid drive systems

2014 ◽  
Vol 158 (3) ◽  
pp. 23-35
Author(s):  
Ireneusz PIELECHA ◽  
Wojciech CIEŚLIK ◽  
Przemysław BOROWSKI ◽  
Jakub CZAJKA ◽  
Wojciech BUESCHKE
Keyword(s):  
Fuel Consumption ◽  
Operating Conditions ◽  
Combustion Engines ◽  
Compression Ignition ◽  
Hybrid Drive ◽  
Zero Emission ◽  
Harmful Substances ◽  
Drive Systems ◽  
Fuel Consumption And Emissions

Continuous increased interest in hybrid drive systems enabling the reduction of fuel consumption and emissions of harmful substances into the atmosphere, as well as their use partly as zero-emission drive in vehicles provides the basis for the development of these types of drive systems. Such trend is indicated by sales analysis of hybrid drives, and this means that actions taken towards of reduction of fuel consumption are still justified. The article reviews combustion engines for hybrid drive systems as far as determination of their operating conditions, indicating mean effective pressure and power/displacement ratio are considered. The concept of hybridization was defined as a measure of the degree of utilization of vehicle electric drive systems (or its drive support). The analysis was conducted on the basis of vehicles equipped with different hybrid drive systems with combustion engines with spark ignition and compression ignition. The hybridization indexes for different groups of hybrid drive systems were determined and significant discrepancies in the way of their determination were pointed out.

SBA MCQs for the MRCS Part A

2012 ◽  
Author(s):  
Sri G. Thrumurthy ◽  
Tania Samantha De Silva ◽  
Zia Moinuddin ◽  
Stuart Enoch
Keyword(s):  
Clinical Case ◽  
Multiple Choice ◽  
Surgical Anatomy ◽  
Surgical Patients ◽  
Multiple Choice Questions ◽  
Basic Sciences ◽  
Self Assessment ◽  
High Level ◽  
Factual Recall ◽  
Selection Of

Specifically designed to help candidates revise for the MRCS exam, this book features 350 Single Best Answer multiple choice questions, covering the whole syllabus. Containing everything candidates need to pass the MRCS Part A SBA section of the exam, it focuses intensively on the application of basic sciences (applied surgical anatomy, physiology, and pathology) to the management of surgical patients. The high level of detail included within the questions and their explanations allows effective self-assessment of knowledge and quick identification of key areas requiring further attention. Varying approaches to Single Best Answer multiple choice questions are used, giving effective exam practice and guidance through revision and exam technique. This includes clinical case questions, 'positively-worded' questions, requiring selection of the most appropriate of relatively correct answers; 'two-step' or 'double-jump' questions, requiring several cognitive steps to arrive at the correct answer; as well as 'factual recall' questions, prompting basic recall of facts.

scholarly journals A survey: which features are required for dynamic visual simultaneous localization and mapping?

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Zewen Xu ◽  
Zheng Rong ◽  
Yihong Wu
Keyword(s):  
Simultaneous Localization And Mapping ◽  
Dynamic Environments ◽  
Visual Features ◽  
Advantages And Disadvantages ◽  
Intelligent Robots ◽  
Localization And Mapping ◽  
High Level ◽  
Static World ◽  
Robotic Applications ◽  
Significant Attention

AbstractIn recent years, simultaneous localization and mapping in dynamic environments (dynamic SLAM) has attracted significant attention from both academia and industry. Some pioneering work on this technique has expanded the potential of robotic applications. Compared to standard SLAM under the static world assumption, dynamic SLAM divides features into static and dynamic categories and leverages each type of feature properly. Therefore, dynamic SLAM can provide more robust localization for intelligent robots that operate in complex dynamic environments. Additionally, to meet the demands of some high-level tasks, dynamic SLAM can be integrated with multiple object tracking. This article presents a survey on dynamic SLAM from the perspective of feature choices. A discussion of the advantages and disadvantages of different visual features is provided in this article.

scholarly journals Photodynamic Therapy Combined with Antibiotics or Antifungals against Microorganisms That Cause Skin and Soft Tissue Infections: A Planktonic and Biofilm Approach to Overcome Resistances

2021 ◽  
Vol 14 (7) ◽  
pp. 603
Author(s):  
Vanesa Pérez-Laguna ◽  
Isabel García-Luque ◽  
Sofía Ballesta ◽  
Antonio Rezusta ◽  
Yolanda Gilaberte
Keyword(s):  
Photodynamic Therapy ◽  
Soft Tissues ◽  
Combined Treatment ◽  
Resistance Pattern ◽  
Antimicrobial Photodynamic Therapy ◽  
Antimicrobial Drugs ◽  
Bacteria And Fungi ◽  
High Level ◽  
Selection Of

The present review covers combination approaches of antimicrobial photodynamic therapy (aPDT) plus antibiotics or antifungals to attack bacteria and fungi in vitro (both planktonic and biofilm forms) focused on those microorganisms that cause infections in skin and soft tissues. The combination can prevent failure in the fight against these microorganisms: antimicrobial drugs can increase the susceptibility of microorganisms to aPDT and prevent the possibility of regrowth of those that were not inactivated during the irradiation; meanwhile, aPDT is effective regardless of the resistance pattern of the strain and their use does not contribute to the selection of antimicrobial resistance. Additive or synergistic antimicrobial effects in vitro are evaluated and the best combinations are presented. The use of combined treatment of aPDT with antimicrobials could help overcome the difficulty of fighting high level of resistance microorganisms and, as it is a multi-target approach, it could make the selection of resistant microorganisms more difficult.

scholarly journals Distributed Simulation Platforms and Data Passing Tools for Natural Hazards Engineering: Reviews, Limitations, and Recommendations

2021 ◽  
Author(s):  
Lichao Xu ◽  
Szu-Yun Lin ◽  
Andrew W. Hlynka ◽  
Hao Lu ◽  
Vineet R. Kamat ◽  
...  
Keyword(s):  
Natural Hazards ◽  
Data Exchange ◽  
Distributed Simulation ◽  
Distributed Data ◽  
Interactive Simulation ◽  
Integrated Simulation ◽  
Domain Specific ◽  
Advantages And Disadvantages ◽  
High Level ◽  
Data Passing

AbstractThere has been a strong need for simulation environments that are capable of modeling deep interdependencies between complex systems encountered during natural hazards, such as the interactions and coupled effects between civil infrastructure systems response, human behavior, and social policies, for improved community resilience. Coupling such complex components with an integrated simulation requires continuous data exchange between different simulators simulating separate models during the entire simulation process. This can be implemented by means of distributed simulation platforms or data passing tools. In order to provide a systematic reference for simulation tool choice and facilitating the development of compatible distributed simulators for deep interdependent study in the context of natural hazards, this article focuses on generic tools suitable for integration of simulators from different fields but not the platforms that are mainly used in some specific fields. With this aim, the article provides a comprehensive review of the most commonly used generic distributed simulation platforms (Distributed Interactive Simulation (DIS), High Level Architecture (HLA), Test and Training Enabling Architecture (TENA), and Distributed Data Services (DDS)) and data passing tools (Robot Operation System (ROS) and Lightweight Communication and Marshalling (LCM)) and compares their advantages and disadvantages. Three specific limitations in existing platforms are identified from the perspective of natural hazard simulation. For mitigating the identified limitations, two platform design recommendations are provided, namely message exchange wrappers and hybrid communication, to help improve data passing capabilities in existing solutions and provide some guidance for the design of a new domain-specific distributed simulation framework.

scholarly journals A Systematic Literature Review of Multi-Criteria Decision-Making Methods for Sustainable Selection of Insulation Materials in Buildings

2021 ◽  
Vol 13 (2) ◽  
pp. 737
Author(s):  
Indre Siksnelyte-Butkiene ◽  
Dalia Streimikiene ◽  
Tomas Balezentis ◽  
Virgilijus Skulskis
Keyword(s):  
Decision Making ◽  
Literature Review ◽  
Systematic Literature Review ◽  
Energy Demand ◽  
Energy Performance ◽  
Future Research ◽  
Multi Criteria Decision Making ◽  
Insulation Materials ◽  
Advantages And Disadvantages ◽  
Selection Of

The European Commission has recently adopted the Renovation Wave Strategy, aiming at the improvement of the energy performance of buildings. The strategy aims to at least double renovation rates in the next ten years and make sure that renovations lead to higher energy and resource efficiency. The choice of appropriate thermal insulation materials is one of the simplest and, at the same time, the most popular strategies that effectively reduce the energy demand of buildings. Today, the spectrum of insulation materials is quite wide, and each material has its own specific characteristics. It is recognized that the selection of materials is one of the most challenging and difficult steps of a building project. This paper aims to give an in-depth view of existing multi-criteria decision-making (MCDM) applications for the selection of insulation materials and to provide major insights in order to simplify the process of methods and criteria selection for future research. A systematic literature review is performed based on the Search, Appraisal, Synthesis and Analysis (SALSA) framework and the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. In order to determine which MCDM method is the most appropriate for different questions, the main advantages and disadvantages of different methods are provided.

Forestry Working Groups/Groupes du travail

1989 ◽  
Vol 65 (3) ◽  
pp. 220-224
Author(s):  
J. J. E. Dosne
Keyword(s):  
Developing Countries ◽  
Natural Resources ◽  
Burkina Faso ◽  
New Caledonia ◽  
International Organisations ◽  
Tropical Forestry ◽  
Advantages And Disadvantages ◽  
Working Groups ◽  
Increasing Demand ◽  
Definition Of

The advantages and disadvantages of working in developing countries are reviewed. The definition of a developing country and the aid it receives from Canada are analysed. Projects in these countries do not harm the Canadian industry. The development of natural resources is a priority of international organisations, after health, sanitation and education. Organisations interested in this development are listed. A few notes of forestry projects in Turkey, Jamaica, Honduras, Burkina Faso, Haiti, Costa Rica are enclosed; as well as an ideal project in New Caledonia where they have assumed their own responsibility. A message: all Canadian faculties of forestry, should give a few courses on tropical forestry because of its need and the increasing demand for Canadian foresters in this field. All who have worked overseas agree that there is a certain satisfaction in having contributed to the advancement of developing countries.

The selection of the main axis and the forming plane in automatic profiling and stamping lines

2021 ◽  
pp. 44-48
Author(s):  
O.M. Koryagina
Keyword(s):  
Main Axis ◽  
Labor Costs ◽  
Simple Shape ◽  
Small Thickness ◽  
Advantages And Disadvantages ◽  
The Third ◽  
Large Length ◽  
Straight Lines ◽  
Light Profiles ◽  
Selection Of

The article defines the main axis and the profiling plane in automatic profiling and stamping lines. Specific recommendations are given for choosing the position of the main axis and the profiling plane, depending on the configuration of the manufactured parts of the roll-formed section. Under the general name of profiling in the practice of stamping works, it is meant to obtain rigid and light profiles of large length and various configurations from sheet blanks. Profiling is carried out in four ways: in dies on crank presses, in dies on special bending presses, on universal bending machines (edging machines), on profiling roller machines. The first method, profiling on crank presses, is used for complex semi-closed and open profiles of relatively small length, if there are no special bending presses or profiling machines. The second method, profiling on special bending presses, is used for open and semiclosed profiles up to 5 mm long. The advantage of such presses is the possibility of using simple, and therefore cheap, tools in the manufacture. The third method, profiling on universal bending machines (edging machines), is used for bending parts (profiles of a simple shape in straight lines with different coupling radii determined by the radius of the machine ruler, for which the latter has a set of rulers). Bending machines allow bending materials of small thickness. Low productivity and the need for physical labor costs limit the use of these machines. The fourth method, profiling on roller machines, is used for open, semi-closed and closed profiles. The essence of the profiling process is to gradually change the profile drawing of a flat belt to a given profile when it is moved sequentially through several pairs of shaped rollers arranged sequentially one after the other in the same plane and rotating at the same speed. The article describes in detail the fourth method; the advantages and disadvantages are noted.

GIS Based Multi-Criteria decision support system and machine learning for Hospital Site Selection case study Oran - Algeria

2022 ◽  
Vol 14 (1) ◽  
pp. 0-0
Keyword(s):  
Site Selection ◽  
Decision Makers ◽  
Analysis Method ◽  
Automatic Learning ◽  
Hospital Site ◽  
Set Up ◽  
High Level ◽  
Selection Of ◽  
The Ideal

The selection of hospital sites is one of the most important choice a decision maker has to take so as to resist the pandemic. The decision may considerably affect the outbreak transmission in terms of efficiency , budget, etc. The main targeted objective of this study is to find the ideal location where to set up a hospital in the willaya of Oran Alg. For this reason, we have used a geographic information system coupled to the multi-criteria analysis method AHP in order to evaluate diverse criteria of physiological positioning , environmental and economical. Another objective of this study is to evaluate the advanced techniques of the automatic learning . the method of the random forest (RF) for the patterning of the hospital site selection in the willaya of Oran. The result of our study may be useful to decision makers to know the suitability of the sites as it provides a high level of confidence and consequently accelerate the power to control the COVID19 pandemic.

Approaches to the Organization of International Accounting in Russian Enterprises

TEM Journal ◽  
2021 ◽  
pp. 249-258
Author(s):  
Ekaterina V. Surkova ◽  
Galina A. Skachko ◽  
Larisa K. Nikandrova ◽  
Maria M. Starkova ◽  
Nina F. Sakharova
Keyword(s):  
Financial Reporting ◽  
Accounting Information ◽  
Financial Statements ◽  
Reporting Standards ◽  
Optimal Method ◽  
Accounting Standard ◽  
Financial Reporting Standards ◽  
Advantages And Disadvantages ◽  
The Individual ◽  
Selection Of

The article discusses current issues of transformation of accounting information in accordance with international financial reporting standards (IFRS). This study is primarily aimed at developing approaches that determine the need for Russian enterprises to provide accounting information comparable at the international level. The authors analyze methods of transferring data from the Russian Accounting Standard (RAS) to IFRS. The methods used to form financial statements in accordance with IFRS are discussed. The issues of the application of these methods, as well as their advantages and disadvantages, are discussed. The author's approach to the selection of the optimal method of transformation is proposed taking into account the individual needs of organizations.

Sign in / Sign up

Export Citation Format

Share Document