scholarly journals Preparation of Nanochitosan as an Effective Adsorbent for Removal of Pb (II) From Aqueous Solution

2019 ◽  
Author(s):  
Camellia Zareie ◽  
Saeideh Kholghi Eshkalak ◽  
Ghasem Najafpour Darzi ◽  
Mazyar Sharifzadeh baei ◽  
Habibollah Younesi ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Ph Value ◽  
Sorption Process ◽  
Sorption Data ◽  
Kinetics Of Adsorption ◽  
Force Microscopy ◽  
Freundlich Isotherms ◽  
Atomic Force ◽  
Pseudo Second Order ◽  
Sorption Parameters

In this work, nanochitosan (NC) was prepared through ionic gelation using low-molecular-weight chitosan and maleic acid (MA). The synthesized NC was charac¬terized by means of Fourier Transform Infrared Spectroscopy (FTIR), Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM). In the course of preparation, the particle size of the material was strongly depended on the parameters such as chitosan concentration and pH of the solution. By controlling the above parameters, NC with the size of smaller than 100 nm was prepared. The chitosan and prepared NC were used for the adsorption of Pb (II) from aqueous solutions in a batch system. Among the sorption parameters, pH showed the strongest effect on the sorption process and maximum Pb (II) removal was obtained at pH value of 6. The pseudo-first-order and pseudo-second-order were used to track the kinetics of adsorption process. Langmuir and Freundlich isotherms were subjected to sorption data to estimate the sorption capacity. NC proved to be an excellent adsorbent with remarkable capacity to remove Pb (II) ions from the aqueous solutions at various concentrations. The NC also showed incredible performance with a comparatively easier preparation process than other reported work.

scholarly journals Uptake of Pb(II) Ions from Simulated Aqueous Solution via Nanochitosan

Coatings ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 862 ◽  
Author(s):  
Camellia Zareie ◽  
Saeideh Kholghi Eshkalak ◽  
Ghasem Najafpour Darzi ◽  
Mazyar Sharifzadeh Baei ◽  
Habibollah Younesi ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Ph Value ◽  
Sorption Process ◽  
Absorption Capacity ◽  
Absorption Data ◽  
Force Microscopy ◽  
Atomic Force ◽  
Low Molecular Weight Chitosan ◽  
Pseudo Second Order ◽  
Sorption Parameters

In this work, nanochitosan (NC) was prepared through ionic gelation using low molecular weight chitosan and maleic acid (MA). The synthesized NC was characterized by atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). During preparation, the particle size of the material depended on parameters such as concentration of chitosan and pH of the aqueous solution. After controlling the mentioned parameters, NC smaller than 100 nm was prepared. The chitosan and prepared NC were employed for the adsorption of Pb(II) from an aqueous solution in the form of a batch system. Among the sorption parameters, pH showed the strongest effect on the sorption process and removal of the maximum number of Pb(II) ions was obtained at pH value of 6. Pseudo-first-order and pseudo-second-order models were used to track the kinetics of the adsorption process. Langmuir and Freundlich’s isotherms were subjected to the absorption data to evaluate absorption capacity. NC proved to be an excellent adsorbent with a remarkable capacity to eliminate Pb(II) ions from aqueous solutions at multiple concentrations. The NC also showed better performance with a comparatively easier preparation process than in other reported work.

The sorption of lead, cadmium, copper and zinc ions from aqueous solutions on a raw diatomite from Algeria

2012 ◽  
Vol 65 (10) ◽  
pp. 1729-1737 ◽  
Author(s):  
Messaouda Safa ◽  
Mohammed Larouci ◽  
Boumediene Meddah ◽  
Pierre Valemens
Keyword(s):  
Metal Ions ◽  
Low Cost ◽  
Kinetic Equations ◽  
Sorption Process ◽  
Second Order ◽  
Order Kinetic ◽  
Reaction Conditions ◽  
Freundlich Isotherms ◽  
Pseudo Second Order ◽  
Sorption Parameters

The adsorption of Cu2+, Zn2+, Cd2+ and Pb2+ ions from aqueous solution by Algerian raw diatomite was studied. The influences of different sorption parameters such as contact pH solution, contact time and initial metal ions concentration were studied to optimize the reaction conditions. The metals ions adsorption was strictly pH dependent. The maximum adsorption capacities towards Cu2+, Zn2+, Cd2+ and Pb2+ were 0.319, 0.311, 0.18 and 0.096 mmol g−1, respectively. The kinetic data were modelled using the pseudo-first-order and pseudo-second-order kinetic equations. Among the kinetic models studied, the pseudo-second-order equation was the best applicable model to describe the sorption process. Equilibrium isotherm data were analysed using the Langmuir and the Freundlich isotherms; the results showed that the adsorption equilibrium was well described by both model isotherms. The negative value of free energy change ΔG indicates feasible and spontaneous adsorption of four metal ions on raw diatomite. According to these results, the high exchange capacities of different metal ions at high and low concentration levels, and given the low cost of the investigated adsorbent in this work, Algerian diatomite was considered to be an excellent adsorbent.

scholarly journals Comparison of novel Ziziphus lotus adsorbent and industrial carbon on methylene blue removal from aqueous solutions

2018 ◽  
Vol 78 (10) ◽  
pp. 2055-2063
Author(s):  
Asmaa Msaad ◽  
Mounir Belbahloul ◽  
Samir El Hajjaji ◽  
Abdeljalil Zouhri
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Aqueous Solutions ◽  
Low Cost ◽  
Sorption Process ◽  
Second Order ◽  
Order Kinetic ◽  
Industrial Carbon ◽  
Freundlich Isotherms ◽  
Pseudo Second Order

Abstract In this work, the use of a novel low-cost adsorbent derived from Ziziphus lotus (ZL) and industrial carbon (IC) has been successfully applied to the removal of methylene blue (MB) from aqueous solutions. The efficiency of this material was studied through Lagergren pseudo-first-order and pseudo-second-order kinetic models. The process for the novel activated carbon and the IC were best represented by the pseudo-second-order rate model. Langmuir and Freundlich isotherms were used to describe the sorption equilibrium data. The Langmuir model turned out to be the most adequate and maximum capacities were measured to be 833.33 and 142.85 mg.g−1 for ZL activated carbon and IC from Sigma Aldrich, respectively. The thermodynamic study revealed that the sorption process is spontaneous and endothermic for the two adsorbents. To explain the effectiveness of MB removal, ZL activated carbon was characterized by scanning electron microscopy, Brunauer–Emmett–Teller surface area, X-ray diffraction and Fourier transform infrared spectroscopy.

Removal of Mercury From Aqueous Solutions by ETS-4 Microporous Titanosilicate: Effect of Contact Time, Titanosilicate Mass and Initial Metal Concentration

2007 ◽  
Author(s):  
C. B. Lopes ◽  
M. Otero ◽  
Z. Lin ◽  
E. Pereira ◽  
C. M. Silva ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Aqueous Solutions ◽  
Contact Time ◽  
Sorption Process ◽  
Exchange Equilibrium ◽  
Toxic Heavy Metals ◽  
Experimental Conditions ◽  
Freundlich Isotherms ◽  
Pseudo Second Order ◽  
Microporous Titanosilicate

Mercury is one of the most toxic heavy metals present in the environment and therefore is extremely important develop new, simple and reliable techniques for its removal from aqueous solutions. A recent line of research within this context is the application of microporous materials. The use of these materials for removing heavy metals from solutions may become a potential clean-up technology in the field of wastewater treatment. In this work it is reported the application of microporous titanosilicate ETS-4 as ion exchanger to remove Hg2+ from aqueous solution. Under batch conditions, we studied the effect of contact time, titanosilicate mass and initial Hg2+ concentration. Only 5 mg of ETS-4 are required to purify 2 litres of water with 50 μg L−1 of metal. Under the experimental conditions, the initial Hg2+ concentration and ETS-4 mass have strong influence on the sorption process, and it is proved that 24 h are almost always sufficient to attain ion exchange equilibrium. Langmuir and Freundlich isotherms were used to fit equilibrium experimental results. The kinetics of mercury removal was reliably described by a pseudo second-order model. On the whole, ETS-4 shows considerable potential to remove Hg2+ from wastewaters.

scholarly journals Enhancing Removal of Cr(VI), Pb2+, and Cu2+ from Aqueous Solutions Using Amino-Functionalized Cellulose Nanocrystal

Molecules ◽  
2021 ◽  
Vol 26 (23) ◽  
pp. 7315
Author(s):  
Qinghua Xu ◽  
Xiaodi Huang ◽  
Lukuan Guo ◽  
Yu Wang ◽  
Liqiang Jin
Keyword(s):  
Aqueous Solutions ◽  
Cellulose Nanocrystal ◽  
X Ray Diffraction ◽  
Potential Measurement ◽  
Force Microscopy ◽  
Atomic Force ◽  
Adsorption Capacities ◽  
Green Route ◽  
Pseudo Second Order ◽  
Ft Ir

In this work, the amino-functionalized cellulose nanocrystal (ACNC) was prepared using a green route and applied as a biosorbent for adsorption of Cr(VI), Pb2+, and Cu2+ from aqueous solutions. CNC was firstly oxidized by sodium periodate to yield the dialdehyde nanocellulose (DACNC). Then, DACNC reacted with diethylenetriamine (DETA) to obtain amino-functionalized nanocellulose (ACNC) through a Schiff base reaction. The properties of DACNC and ACNC were characterized by using elemental analysis, Fourier transform infrared spectroscopy (FT-IR), Kaiser test, atomic force microscopy (AFM), X-ray diffraction (XRD), and zeta potential measurement. The presence of free amino groups was evidenced by the FT-IR results and Kaiser test. ACNCs exhibited an amphoteric nature with isoelectric points between pH 8 and 9. After the chemical modification, the cellulose I polymorph of nanocellulose remained, while the crystallinity decreased. The adsorption behavior of ACNC was investigated for the removal of Cr(VI), Pb2+, and Cu2+ in aqueous solutions. The maximum adsorption capacities were obtained at pH 2 for Cr(VI) and pH 6 for Cu2+ and Pb2+, respectively. The adsorption all followed pseudo second-order kinetics and Sips adsorption isotherms. The estimated adsorption capacities for Cr(VI), Pb2+, and Cu2+ were 70.503, 54.115, and 49.600 mg/g, respectively.

Synthesis and Characterization of Chitosan templated Mesoporous Silica: Efficient use of Mesoporous Silica in the removal of Cu(II) from Aqueous Solutions

2016 ◽  
Vol 4 (2) ◽  
pp. 105-112
Author(s):  
Lalchhing puii ◽  
◽  
Seung-Mok Lee ◽  
Diwakar Tiwari ◽  
◽  
...  
Keyword(s):  
Mesoporous Silica ◽  
Aqueous Solutions ◽  
Background Electrolyte ◽  
Second Order ◽  
Order Kinetic ◽  
Sorption Data ◽  
Column Reactor ◽  
Wide Ph Range ◽  
Freundlich Adsorption Isotherm ◽  
Pseudo Second Order

A mesoporous silica was synthesized by annealing (3-Aminopropyl) triethoxysilane grafted chitosan at 800˚C. The mesoporous silica was characterized by the XRD (X-ray diffraction) analysis. The BET specific surface area and pore size of silica was found to be 178.42 m2/g and 4.13 nm. The mesoporous silica was then employed for the efficient remediation of aqueous solutions contaminated with Cu(II) under batch and column reactor operations. The mesoporous silica showed extremely high per cent removal of Cu(II) at wide pH range i.e., pH ~2.0 to 7.0. Relatively a fast uptake of Cu(II) was occurred and high percentage removal was obtained at initial concentrations studied from 1.0 to 15.0 mg/L. The equilibrium state sorption data were utilized for the Langmuir and Freundlich adsorption isotherm studies. Moreover, the effect of an increase in background electrolyte concentrations from 0.0001 to 0.1 mol/L NaNO3 was assessed for the uptake of Cu(II) by mesoporous silica. The equilibrium sorption was achieved within 240 min of contact and the kinetic data is best fitted to the pseudo-second-order and fractal like pseudo-second-order kinetic models. In addition, the mesoporous silica was used for dynamic studies under column reactor operations. The breakthrough curve was then used for the non-linear fitting of the Thomas equation and the loading capacity of the column for Cu(II) was estimated.

Effect of Water Temperature, pH Value, and Film Thickness on the Wettability Behaviour of Copper Surfaces Coated with Copper Using EB-PVD Technique

2019 ◽  
Vol 60 ◽  
pp. 124-141 ◽  
Author(s):  
Naser Ali ◽  
Joao Amaral Teixeira ◽  
Abdulmajid Addali
Keyword(s):  
Surface Roughness ◽  
Contact Angle ◽  
Film Thickness ◽  
Water Temperature ◽  
Ph Value ◽  
Surface Wettability ◽  
Copper Surfaces ◽  
Force Microscopy ◽  
Atomic Force ◽  
Static Contact

This research investigates the effect of surface roughness, water temperature, and pH value on the wettability behaviour of copper surfaces. An electron beam physical vapour deposition technique was used to fabricate 25, 50, and 75 nm thin films of copper on the surface of copper substrates. Surface topographical analysis, of the uncoated and coated samples, was performed using an atomic force microscopy device to observe the changes in surface microstructure. A goniometer device was then employed to examine the surface wettability of the samples by obtaining the static contact angle between the liquid and the attached surface using the sessile drops technique. Waters of pH 4, 7, and 9 were employed as the contact angle testing fluids at a set of fixed temperatures that ranged from 20°C to 60°C. It was found that increasing the deposited film thickness reduces the surface roughness of the as-prepared copper surfaces and thus causing the surface wettability to diverge from its initial hydrophobic nature towards the hydrophilic behaviour region. A similar divergence behaviour was seen with the rise in temperature of water of pH 4, and 9. In contrast, the water of pH 7, when tested on the uncoated surface, ceased to reach a contact angle below 90o. It is believed that the observed changes in surface wettability behaviour is directly linked to the liquid temperature, pH value, surface roughness, along with the Hofmeister effect between the water and the surface in contact.

Kinetics and thermodynamics of the sorption of furaltadone from aqueous solutions on magnetic multi-walled carbon nanotubes

2014 ◽  
Vol 70 (6) ◽  
pp. 964-971
Author(s):  
Xu Chen ◽  
Zhen-hu Xiong
Keyword(s):  
Carbon Nanotubes ◽  
Aqueous Solutions ◽  
Sorption Data ◽  
Multi Wall Carbon Nanotubes ◽  
Adsorption Behaviors ◽  
Different Temperatures ◽  
Multi Walled Carbon Nanotubes ◽  
Pseudo Second Order ◽  
Experimental Data Analysis ◽  
Walled Carbon Nanotubes

Magnetic multi-wall carbon nanotubes (M-MWCNTs) were used as an adsorbent for removal of furaltadone from aqueous solutions, and the adsorption behaviors were investigated by varying pH, sorbent amount, sorption time and temperature. The results showed that the adsorption efficiency of furaltadone reached 97% when the dosage of M-MWCNT was 0.45 g · L−1, the pH was 7 and the adsorption time was 150 min. The kinetic data showed that the pseudo-second-order model can fit the adsorption kinetics. The sorption data could be well explained by the Langmuir model under different temperatures. The adsorption process was influenced by both intraparticle diffusion and external mass transfer. The experimental data analysis indicated that the electrostatic attraction and π–π stacking interactions between M-MWCNT and furaltadone might be the adsorption mechanism. Thermodynamic analysis reflected that adsorption of furaltadone on the M-MWCNT was spontaneous and exothermic. Our study showed that M-MWCNTs can be used as a potential adsorbent for removal of furaltadone from water and wastewater.

A Comparative Sorption Study of Ni (II) form Aqueous Solution Using Silica Gel, Amberlite IR-120 and Sawdust

2019 ◽  
Vol 233 (9) ◽  
pp. 1275-1292 ◽  
Author(s):  
Atta ul Haq ◽  
Muhammad Rasul Jan ◽  
Jasmin Shah ◽  
Maria Sadia ◽  
Muhammad Saeed
Keyword(s):  
Sorption Capacity ◽  
Silica Gel ◽  
Low Cost ◽  
Sorption Process ◽  
Second Order ◽  
Order Kinetic ◽  
Sorption Data ◽  
Desorption Study ◽  
Pseudo Second Order ◽  
Sorption Study

Abstract The presence of heavy metals in water causes serious problems and their treatment before incorporating into the water body is a challenge for researchers. The present study was conducted to compare the sorption study of Ni (II) using silica gel, amberlite IR-120 and sawdust of mulberry wood in batch system under the influence of pH, initial Ni (II) concentration and contact time. It was observed that sorption process was depending upon pH and maximum sorption was achieved at pH 7.0. Kinetic data were well fitted into pseudo-second order kinetic model due to high R2 values and closeness of experimental sorption capacity and calculated sorption capacity of pseudo-second order. Isotherms study showed that Langmuir is one of the most suitable choices to explain sorption data due to high R2 values. The monolayer sorption capacities of silica gel, amberlite IR-120 and sawdust were found to be 33.33, 25.19, and 33.67 mg g−1, respectively. Desorption study revealed that NaCl is one of the most appropriate desorbent. It may be concluded from this study that sawdust is a suitable sorbent due to low cost, abundant availability and recycling of the materials for further study.

scholarly journals Adsorption of Reactive Black M-2R on Different Deacetylation Degree Chitosan

2011 ◽  
Vol 6 (3) ◽  
pp. 155892501100600 ◽  
Author(s):  
Fang Li ◽  
Chunmei Ding
Keyword(s):  
Sorption Process ◽  
Order Kinetic ◽  
Sorption Data ◽  
Kinetic Experiment ◽  
Isotherm Equation ◽  
Degree Of Deacetylation ◽  
Deacetylation Degree ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Effects Of Temperature

Different degree of deacetylation (DD) chitosan was prepared and used for the removal of a Reactive black M-2R (RBM) from aqueous solution. The effects of temperature (298 K~323 K), chitosan dosage, degree of deacetylation on RBM removal were investigated. The adsorption equilibrium was reached within one hour. In order to determine the adsorption capacity, the sorption data were analyzed by using linear form of Langmuir, Freundlich and Tempkin isotherm equation. Langmuir equation shows higher conformity than the other two equations. From the kinetic experiment data, it was found that the sorption process follows the pseudo-second-order kinetic model. Activation energy value for sorption process was found to be 58.28 kJ mol-1. Chitosan with 66% deacetylation degree (DD) exhibited good adsorption performance for RBM. In order to determine the interactions between RBM and chitosan, FTIR analysis was also conducted.

Sign in / Sign up

Export Citation Format

Share Document