A Study of Human Pointing Features on Touch-Screens -Age Effect, Difference by Gender, and Difference in Direction-

2007 ◽  
Vol 19 (6) ◽  
pp. 715-723 ◽  
Author(s):  
Masanobu Komazaki ◽  
◽  
Masanori Idesawa
Keyword(s):  
User Interfaces ◽  
Dynamic Properties ◽  
Movement Time ◽  
Touch Screen ◽  
Practice Effect ◽  
Touch Screens ◽  
And Gender ◽  
Set Up ◽  
Time Required ◽  
Interface Devices

We set up guidelines for designing graphic user interfaces (GUI), e.g., software-keyboards, for touch screens easier to used than conventional input (or interface) devices for IT systems such as keyboards and mice. We studied aging and gender differences in the dynamic properties of user pointing on a touch screen. We obtained the following results: (1) Standard Fitts’law did not hold very well when subjects repeated pointing using one finger between two targets close together on the touch screen. Movement-Time (MT) -the time required for pointing- increased linearly with the index of difficulty (ID) - the ratio of distance between targets (D) to target size (S). (2) Neither α -the ratio of the increase of MT to ID- nor β -MT when ID is 0- differed significantly between men and women. (3) α took almost the same value in older, middle-aged, and younger subjects, whereas β differed significantly between these groups. β increased linearly with age. (4) α and β did not differ significantly between left-right and depth in pointing. (5) The practice effect reduced the dispersion of α and β.

A Comparison of Five User Interface Devices Designed for Point-of-Sale in the Retail Industry

1995 ◽  
Vol 39 (4) ◽  
pp. 273-277 ◽  
Author(s):  
Karen S. Wilson ◽  
Michael Inderrieden Steven Liu
Keyword(s):  
User Interface ◽  
Human Performance ◽  
Touch Screen ◽  
Error Rates ◽  
Laboratory Research ◽  
Retail Industry ◽  
Basic Point ◽  
Point Of Sale ◽  
Touch Screens ◽  
Interface Devices

Although human performance on keyboards, pointing devices, and touch screens in the desktop environment has been studied and reported to the extent that the results can be used to determine productivity rates from those devices, little research has been conducted on devices used in controlled environments, like that of point-of-sale in the retail industry. While previous devices available for user interaction in this environment have been 2×20 displays and industry specific keyboards, current technology has moved the industry to implement CRTs, LCDs, full keyboards, touch screens and uniquely designed devices like the NCR DynaKey, an integrated LCD, keypad and dynamically assignable function keys. A full understanding of human performance on these devices was required to aid retailers in cost justifying their investment in them. Laboratory research was conducted to compare performance of basic point-of-sale tasks on a CRT with 56-key keyboard, 3 versions of an LCD touch screen, and the NCR DynaKey. Participants performed keying tasks, item modification tasks, a combination of item modification and scanning, and the same combination of item modification and scanning with a secondary monitoring task imposed. Time and error rates showed significant differences among the user interface devices for each of the task requirements in this research. Overall, mechanically keyed numeric entry was superior to touch screen numeric entry, mechanical keys were more advantageous with increased skill levels, and the integration of input mechanism and display as well as direct mapping between input and display enhanced performance.

Designing Touch Screen Numeric Keypads: Effects of Finger Size, Key Size, and Key Spacing

1997 ◽  
Vol 41 (1) ◽  
pp. 360-364 ◽  
Author(s):  
Brenda Scott ◽  
Vincent Conzola
Keyword(s):  
Gender Differences ◽  
Real Estate ◽  
User Interfaces ◽  
Touch Screen ◽  
Design Guidelines ◽  
Error Rates ◽  
Point Of Sale ◽  
Males And Females ◽  
Touch Screens ◽  
Speed And Accuracy

Designing numeric keypads for point-of-sale devices to optimize keying speed and accuracy while efficiently utilizing touch screen real estate is a challenge. Existing design guidelines for touch screens are applicable to only specific classes of devices and fail to consider user variables such as finger size. The present study investigated keying speed and error rates for various keypad configurations in a simulated retail keying task. Finger sizes were taken into account. Results support the use of compressed (2 mm or less) interkey spacing in keypad designs. No significant effects of key size were found. Gender differences in keying speed and accuracy were explained by finger size differences between males and females. Implications for the design of touch screen user interfaces in point-of-sale applications are discussed.

Feminist Perspective in Shashi Deshpande's “That Long Silence”

2018 ◽  
Vol 6 (1) ◽  
pp. 8
Author(s):  
Mohammad Ahashan ◽  
Dr. Sapna Tiwari
Keyword(s):  
Gender Equity ◽  
Social Life ◽  
Fundamental Rights ◽  
Feminist Movement ◽  
Human Beings ◽  
Simone De Beauvoir ◽  
Equal Rights ◽  
And Gender ◽  
Set Up ◽  
Key Aspects

Man has always tried  to determine  and tamper the image of woman and especially her identity is manipulated and orchestrated. Whenever a woman is spoken of, it is always in the relation to man; she is presented as a wife , mother, daughter and even as a lover but never as a woman  a human being- a separate entity. Her entire life is idealized and her fundamental rights and especially her behaviour is engineered by the adherents of patriarchal society. Commenting  on the Man-woman relationship in a marital bond Simone de Beauvoir wrote in her epoch-making book entitled The Second Sex(1949): "It has been said that marriage diminishes man,  which is often true , but almost always it annihilates women". Feminist movement advocates the equal rights and equal opportunities for women. The true spirit of feminism is into look at women and men as human beings. There should not be gender bias or discrimination in familial and social life. To secure gender justice and gender equity is the key aspects of feminist movement. In India, women writers have come forward to voice their feminist approach to life and the patriarchal family set up. They believe that the very notion of gender is not only biotic and biologic episode but it has a social construction.

Marital Disharmony among Working Couples in Metropolitan Life: an In-depth Study in Kolkata City

2019 ◽  
Vol 8 (8) ◽  
pp. 72-85
Author(s):  
Nilanjana Ghoshal ◽  
Mst Tania Parveen ◽  
Dr Asraful Alam
Keyword(s):  
Functional Method ◽  
Modern Times ◽  
Metropolitan Cities ◽  
Urban India ◽  
Depth Study ◽  
Working Couples ◽  
Set Up ◽  
Time Required ◽  
The City ◽  
Opposite Gender

In India, traditionally and from time immemorial, marriage has always been a sacred bond for people of this country. The aim of this study is to explain a socially sanctioned sex relationship involving people of two opposite gender whose relationship is expected to endure beyond time required for gestation. The functional method of the study has been set up on the field-based observation to find out the reasons behind rising of marital disharmony among working couples. But the problem is initially in modern times the concept of marriage is gradually taking a different turn between couples. Hence the focus of this paper is to study the various factors giving rise to marital disharmonies among working couples in urban India and how these discords can be solved so that couples can lead a happy harmonious married life ahead. Survey has been done in the city of Kolkata taking people from various walks of life. As Kolkata is one of the major Metropolitan cities of India it was easier to find people belonging to different professions. The result of this study is every marriage brings challenges in life. Maximum working couples are losing attachment with each other as they have lack of time for each other. Bringing work at home, sharing of parenthood, indifference towards each other, lack of adjustments are the causes for which level of disharmony is increasing.

The use of ICT by SMMEs in a Digital Economy: A case study in Buffalo City Metropolitan in South Africa [Abstract]

10.28945/4314 ◽  
2019 ◽  
Keyword(s):  
South Africa ◽  
Technology Acceptance ◽  
21St Century ◽  
Common Knowledge ◽  
Digital Economy ◽  
Future Research ◽  
Wealth Creation ◽  
Underdeveloped Areas ◽  
And Gender ◽  
Set Up

Aim/Purpose: The goal of this study is to advance understanding of ICT utilization by SMMEs by checking access, ability (in terms of technological skills) and usage of ICT among some SMMEs entrepreneurs operating their businesses in an underdeveloped areas to enhance their business activities in order to utilizes the digital opportunities 21st century digital economies present. Background: In today’s world no nation or region is untouched by the forces of globalization and digital economy. One of the key pioneering forces of globalization is the advances of ICT like internet, social networks, etc. In the sphere of business, this pioneering force has also altered the way businesses and organizations communicate and interact with customers and society at large. Such alternation presents obvious opportunities for wealth creation and growth for businesses and organizations that are well-equipped to take advantages of them. But for those that are less-equipped, particularly SMMEs, globalization can easily lead to fore-closures and marginalization. It is a common knowledge that SMMEs entrepreneurs mostly rely on ICT gadgets like mobile phone, Laptops, Tablets to conduct their business activities as many of them don’t have enough capital to set up offices with necessary equipment. Therefore, using various ICT functions/programs on these ICT devices to enhance their business activities are critical to their businesses in the 21st century digital economies. Methodology: Purposeful sampling was used to approach fifty-four SMMEs entrepreneurs operating their businesses in underdeveloped areas locally called Townships in Buffalo City Metropolitan. Microsoft excel was used in the descriptive statistics. Contribution: This research will add to the growing knowledge ICT usage in SMMEs in the 21st century digital economies. Findings: The results indicate that the participating SMMEs entrepreneurs need to be educated, trained and supported in the use of the ICT applicable to enhance their business activities in order for them to take advantages of 21st century digital economies present. Recommendations for Practitioners: The agencies tasked with looking after SMMEs in South Africa needs to consider the lacked of utilisation of ICTs by SMMEs entrepreneurs operating their businesses in underdeveloped areas as one of the barrier to growing of their businesses and take necessary steps to address it. Recommendation for Researchers: Since age and gender have been proven to be key-moderating variables in many technology acceptance models. There is a need to explore in depth whether the factors of gender and age also act as barriers. Impact on Society: The research will assist stakeholders, policy makers and agencies tasked with looking after SMMEs to identify the barriers hindering SMMEs to grow and address them accordingly. Future Research: More work needs to be done to check whether gender, age of the SMMEs entrepreneurs have some effects on their attitude towards the integration of ICT into their business activities.

scholarly journals Risk Analysis of Road Tunnels: A Computational Fluid Dynamic Model for Assessing the Effects of Natural Ventilation

2020 ◽  
Vol 11 (1) ◽  
pp. 32
Author(s):  
Ciro Caliendo ◽  
Gianluca Genovese ◽  
Isidoro Russo
Keyword(s):  
Natural Ventilation ◽  
Fluid Dynamic ◽  
Movement Time ◽  
Radiant Heat ◽  
Heat Fluxes ◽  
Maximum Heat ◽  
Road Tunnels ◽  
Maximum Heat Release ◽  
Computational Fluid Dynamics Cfd ◽  
Time Required

We have developed an appropriate Computational Fluid Dynamics (CFD) model for assessing the exposure to risk of tunnel users during their evacuation process in the event of fire. The effects on escaping users, which can be caused by fire from different types of vehicles located in various longitudinal positions within a one-way tunnel with natural ventilation only and length less than 1 km are shown. Simulated fires, in terms of maximum Heat Release Rate (HRR) are: 8, 30, 50, and 100 MW for two cars, a bus, and two types of Heavy Goods Vehicles (HGVs), respectively. With reference to environmental conditions (i.e., temperatures, radiant heat fluxes, visibility distances, and CO and CO2 concentrations) along the evacuation path, the results prove that these are always within the limits acceptable for user safety. The exposure to toxic gases and heat also confirms that the tunnel users can safely evacuate. The evacuation time was found to be higher when fire was related to the bus, which is due to a major pre-movement time required for leaving the vehicle. The findings show that mechanical ventilation is not necessary in the case of the tunnel investigated. It is to be emphasized that our modeling might represent a reference in investigating the effects of natural ventilation in tunnels.

Experimental Investigation into Driver Behavior along Curved and Parallel Diverging Terminals of Exit Interchange Ramps

2021 ◽  
pp. 036119812199742
Author(s):  
Alberto Portera ◽  
Marco Bassani
Keyword(s):  
Design Stage ◽  
Lane Change ◽  
Age And Gender ◽  
Traffic Conditions ◽  
Current Design ◽  
The Difference ◽  
Safety Countermeasures ◽  
And Gender ◽  
Set Up ◽  
Curve Radius

Current design manuals provide guidance on how to design exit ramps to facilitate driving operations and minimize the incidence of crashes. They also suggest that interchanges should be built along straight roadway sections. These criteria may prove ineffective in situations where there is no alternative to terminals being located along curved motorway segments. The paper investigates driving behavior along parallel deceleration curved terminals, with attention paid to the difference in impact between terminals having a curvature which is the same sign as the motorway segment (i.e., continue design), and those having an opposite curvature (i.e., reverse design). A driving simulation study was set up to collect longitudinal and transversal driver behavioral data in response to experimental factor variations. Forty-eight drivers were stratified on the basis of age and gender, and asked to drive along three randomly assigned circuits with off-ramps obtained by combining experimental factors such as motorway mainline curve radius (2 values), terminal length (3), curve direction (2), and traffic conditions (2). The motorway radius was found to be significant for drivers’ preferred speed when approaching the terminal. Terminal length and traffic volume do not have a significant impact on either longitudinal or transversal driver outputs. However, the effect of curve direction was found to be significant, notably for reverse terminals which do not compel drivers to select appropriate speeds and lane change positions. This terminal type can give rise to critical driving situations that should be considered at the design stage to facilitate the adoption of appropriate safety countermeasures.

scholarly journals Simple low dose radiography allows precise lung volume assessment in mice

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Amara Khan ◽  
Andrea Markus ◽  
Thomas Rittmann ◽  
Jonas Albers ◽  
Frauke Alves ◽  
...  
Keyword(s):  
Lung Function ◽  
Whole Body ◽  
Acquisition Time ◽  
Micro Ct ◽  
Lung Volumes ◽  
X Ray ◽  
Promising Tool ◽  
Volume Assessment ◽  
Set Up ◽  
Time Required

AbstractX-ray based lung function (XLF) as a planar method uses dramatically less X-ray dose than computed tomography (CT) but so far lacked the ability to relate its parameters to pulmonary air volume. The purpose of this study was to calibrate the functional constituents of XLF that are biomedically decipherable and directly comparable to that of micro-CT and whole-body plethysmography (WBP). Here, we developed a unique set-up for simultaneous assessment of lung function and volume using XLF, micro-CT and WBP on healthy mice. Our results reveal a strong correlation of lung volumes obtained from radiographic XLF and micro-CT and demonstrate that XLF is superior to WBP in sensitivity and precision to assess lung volumes. Importantly, XLF measurement uses only a fraction of the radiation dose and acquisition time required for CT. Therefore, the redefined XLF approach is a promising tool for preclinical longitudinal studies with a substantial potential of clinical translation.

The Reduction of Bias Error in Transfer Function Estimates Using FFT-Based Analyzers

1984 ◽  
Vol 106 (1) ◽  
pp. 29-35 ◽  
Author(s):  
P. Cawley
Keyword(s):  
Transfer Function ◽  
Random Excitation ◽  
Analogue Computer ◽  
Bias Error ◽  
Testing Time ◽  
Theoretical Predictions ◽  
Set Up ◽  
Modal Mass ◽  
Time Required ◽  
Good Agreement

The susceptibility to bias error of two methods for computing transfer (frequency response) functions from spectra produced by FFT-based analyzers using random excitation has been investigated. Results from tests with an FFT analyzer on a single degree-of-freedom system set up on an analogue computer show good agreement with the theoretical predictions. It has been shown that, around resonance, the bias error in the transfer function estimate H2 (Syy/Sxy*) is considerably less than that in the more commonly used estimate, H1 (Sxy/Sxx). The record length, and hence the testing time, required for a given accuracy is reduced by over 50 percent if the H2 calculation procedure is used. The analysis has also shown that if shaker excitation is used on lightly damped structures with low modal mass, it is important to minimize the mass of the force gage and the moving element of the shaker.

Carbon Nanotube Composites for Vibration Damping

2008 ◽  
Vol 47-50 ◽  
pp. 817-820 ◽  
Author(s):  
R.L. Dai ◽  
W.H. Liao
Keyword(s):  
Carbon Nanotube ◽  
Epoxy Resin ◽  
Dynamic Properties ◽  
Element Model ◽  
Vibration Damping ◽  
Segment Length ◽  
Pure Epoxy ◽  
Nanotube Composites ◽  
Carbon Nanotube Composites ◽  
Set Up

It has been found that the composites of carbon nanotubes (CNTs) and epoxy resin could greatly enhance damping ability while the stiffness is kept high. In this paper, carbon nanotube enhanced epoxy resin is fabricated. A testing apparatus for obtaining composite dynamic properties is set up. In particular, the loss factors are measured. Experimental results show that CNT additive can provide the composite with several times higher damping as compared with pure epoxy. A finite element model is built to simulate the composite damping. CNT diameter and segment length are investigated using the developed model. Results show that composite damping is insensitive to CNT segment length while the effect of CNT diameter on composite damping is significant.

Sign in / Sign up

Export Citation Format

Share Document