scholarly journals INFLUENCE ON PISTON ENGINE PERFORMANCE BY THE BIOCOMPONENTS AND DIFFERENT TYPES OF NANO MATERIALS

2021 ◽  
pp. 12-23
Author(s):  
А.М. Levterov ◽  
А.А. Levterov
Keyword(s):  
Alternative Fuels ◽  
Combustion Engine ◽  
Direct Injection ◽  
Cetane Number ◽  
Motor Fuel ◽  
Engine Performance ◽  
Complete Combustion ◽  
New Energy ◽  
Leading Position ◽  
Comparative Results

The obviousness of the finiteness of the planet's energy resources makes us constantly concern ourselves with the search for new energy sources and their rational use. The main energy converter is the internal combustion engine and contrary to forecasts, continues to occupy a leading position. Therefore, the issues of improving its working processes, reducing the consumption of mineral fuel, the possibility of using all kinds of alternative fuels and improving the quality of motor fuel continue to be considered throughout the energy world. On the agenda is the dissemination of advances in nanotechnology to the propulsion industry. Improvement of engine performance when using fuel dispersed with nanomaterials of various types is beyond doubt and is used both for pure petroleum and biodiesel and for their mixtures. In the article, against the background of the analysis of studies on the use of alternative biofuels and the introduction of the practice of introducing nanoparticles into petroleum fuel and biofuels as a potential energy carrier to improve the characteristics of toxicity and engine performance, the results of studies of a number of biofuels have been presented. Presented are the results of a study of the performance of a 1Ch 8.5 / 11 diesel engine carried out in the laboratory of IPMash NAS of Ukraine when operating on diesel fuel dispersed with carbon spheroidal nanoadditives of various concentrations, and some comparative results of studies of the indicators of diesel engines with direct injection 2Ch 10.5 / 12 and 4ChN 7.9 / 7.5 ALH, operating on standard and mixed fuels with biocomponents synthesized from rapeseed, sunflower, mustard and corn oils. The thermophysical properties of the fuel (heat of combustion, thermal conductivity, heat capacity, density, kinematic viscosity, convective heat transfer, ignition temperature, cetane number, etc.) undergo significant changes when nanoparticles are introduced into it. The optimal amount of metal nanoparticles, metal oxides, carbon tubes, graphene in mineral, biodiesel or mixed fuel promotes more complete combustion, significantly improves engine performance, and reduces harmful emissions.

Ethers and esters as alternative fuels for internal combustion engine: A review

2021 ◽  
pp. 146808742110464
Author(s):  
Yang Hua
Keyword(s):  
Alternative Fuels ◽  
Combustion Engine ◽  
Combustion Process ◽  
Pressure Rise ◽  
Engine Performance ◽  
Internal Combustion ◽  
Operating Conditions ◽  
Future Research ◽  
Particulate Emissions ◽  
Ic Engine

Ether and ester fuels can work in the existing internal combustion (IC) engine with some important advantages. This work comprehensively reviews and summarizes the literatures on ether fuels represented by DME, DEE, DBE, DGM, and DMM, and ester fuels represented by DMC and biodiesel from three aspects of properties, production and engine application, so as to prove their feasibility and prospects as alternative fuels for compression ignition (CI) and spark ignition (SI) engines. These studies cover the effects of ether and ester fuels applied in the form of single fuel, mixed fuel, dual-fuel, and multi-fuel on engine performance, combustion and emission characteristics. The evaluation indexes mainly include torque, power, BTE, BSFC, ignition delay, heat release rate, pressure rise rate, combustion duration, exhaust gas temperature, CO, HC, NOx, PM, and smoke. The results show that ethers and esters have varying degrees of impact on engine performance, combustion and emissions. They can basically improve the thermal efficiency of the engine and reduce particulate emissions, but their effects on power, fuel consumption, combustion process, and CO, HC, and NOx emissions are uncertain, which is due to the coupling of operating conditions, fuel molecular structure, in-cylinder environment and application methods. By changing the injection strategy, adjusting the EGR rate, adopting a new combustion mode, adding improvers or synergizing multiple fuels, adverse effects can be avoided and the benefits of oxygenated fuel can be maximized. Finally, some challenges faced by alternative fuels and future research directions are analyzed.

Effect of n-heptane and n-decane on exhaust odour in direct injection diesel engines

2005 ◽  
Vol 219 (4) ◽  
pp. 565-571 ◽  
Author(s):  
M M Roy
Keyword(s):  
Direct Effect ◽  
Diesel Fuel ◽  
Diesel Engines ◽  
Ignition Delay ◽  
Boiling Point ◽  
Alternative Fuels ◽  
Direct Injection ◽  
Cetane Number ◽  
Mixture Formation ◽  
Incomplete Combustion

This study investigated the effect of n-heptane and n-decane on exhaust odour in direct injection (DI) diesel engines. The prospect of these alternative fuels to reduce wall adherence and overleaning, major sources of incomplete combustion, as well as odorous emissions has been investigated. The n-heptane was tested as a low boiling point fuel that can improve evaporation as well as wall adherence. However, the odour is a little worse with n-heptane and blends than that of diesel fuel due to overleaning of the mixture. Also, formaldehyde (HCHO) and total hydrocarbon (THC) in the exhaust increase with increasing n-heptane content. The n-decane was tested as a fuel with a high cetane number that can improve ignition delay, which has a direct effect on wall adherence and overleaning. However, with n-decane and blends, the odour rating is about 0.5-1 point lower than for diesel fuel. Moreover, the aldehydes and THC are significantly reduced. This is due to less wall adherence and proper mixture formation.

RCCI of Synthetic Kerosene With PFI of N-Butanol-Combustion and Emissions Characteristics

2015 ◽  
Author(s):  
Valentin Soloiu ◽  
Martin Muiños ◽  
Tyler Naes ◽  
Spencer Harp ◽  
Marcis Jansons
Keyword(s):  
Thermal Efficiency ◽  
Fuel Injection ◽  
Direct Injection ◽  
Cetane Number ◽  
Engine Performance ◽  
Reactivity Controlled Compression Ignition ◽  
Ultra Low Sulfur Diesel ◽  
Indicated Mean Effective Pressure ◽  
Soot Emissions ◽  
Low Sulfur

In this study, the combustion and emissions characteristics of Reactivity Controlled Compression Ignition (RCCI) obtained by direct injection (DI) of S8 and port fuel injection (PFI) of n-butanol were compared with RCCI of ultra-low sulfur diesel #2 (ULSD#2) and PFI of n-butanol at 6 bar indicated mean effective pressure (IMEP) and 1500 rpm. S8 is a synthetic paraffinic kerosene (C6–C18) developed by Syntroleum and is derived from natural gas. S8 is a Fischer-Tropsch fuel that contains a low aromatic percentage (0.5 vol. %) and has a cetane number of 63 versus 47 of ULSD#2. Baselines of DI conventional diesel combustion (CDC), with 100% ULSD#2 and also DI of S8 were conducted. For both RCCI cases, the mass ratio of DI to PFI was set at 1:1. The ignition delay for the ULSD#2 baseline was found to be 10.9 CAD (1.21 ms) and for S8 was shorter at 10.1 CAD (1.12 ms). In RCCI, the premixed charge combustion has been split into two regions of high temperature heat release, an early one BTDC from ignition of ULSD#2 or S8, and a second stage, ATDC from n-butanol combustion. RCCI with n-butanol increased the NOx because the n-butanol contains 21% oxygen, while S8 alone produced 30% less NOx emissions when compared to the ULSD#2 baseline. The RCCI reduced soot by 80–90% (more efficient for S8). However, S8 alone showed a considerable increase in soot emissions compared with ULSD#2. The indicated thermal efficiency was the highest for the ULSD#2 and S8 baseline at 44%. The RCCI strategies showed a decrease in indicated thermal efficiency at 40% ULSD#2-RCCI and 42% and for S8-RCCI, respectively. S8 as a single fuel proved to be a very capable alternative to ULSD#2 in terms of combustion performance nevertheless, exhibited higher soot emissions that have been mitigated with the RCCI strategy without penalty in engine performance.

Performance and emissions characteristics of biodiesel from soybean oil

2005 ◽  
Vol 219 (7) ◽  
pp. 915-922 ◽  
Author(s):  
M Canakci
Keyword(s):  
Soybean Oil ◽  
Diesel Fuel ◽  
Combustion Engine ◽  
Cetane Number ◽  
Engine Performance ◽  
Performance And Emission ◽  
Diesel Fuels ◽  
Animal Fats ◽  
Alternative Diesel Fuel ◽  
Performance And Emissions

Biodiesel is an alternative diesel fuel that can be produced from renewable feedstocks such as vegetable oils, waste frying oils, and animal fats. It is an oxygenated, non-toxic, sulphur-free, biodegradable, and renewable fuel. Many engine manufacturers have included this fuel in their warranties since it can be used in diesel engines without significant modification. However, the fuel properties such as cetane number, heat of combustion, specific gravity, and kinematic viscosity affect the combustion, engine performance and emission characteristics. In this study, the engine performance and emissions characteristics of two different petroleum diesel fuels (No. 1 and No. 2 diesel fuels) and biodiesel from soybean oil and its 20 per cent blends with No. 2 diesel fuel were compared. The results showed that the engine performance of the neat biodiesel and its blend was similar to that of No. 2 diesel fuel with nearly the same brake fuel conversion efficiency, and slightly higher fuel consumption. CO2 emission for the biodiesel was slightly higher than for the No. 2 diesel fuel. Compared with diesel fuels, biodiesel produced lower exhaust emissions, except NO x.

Experimental Investigations of Performance and Emission Characteristics of Moringa Oil Methyl Ester and Its Diesel Blends in a Single Cylinder Direct Injection Diesel Engine

2009 ◽  
Author(s):  
Shyamsundar Rajaraman ◽  
G. K. Yashwanth ◽  
T. Rajan ◽  
R. Siva Kumaran ◽  
P. Raghu
Keyword(s):  
Diesel Engine ◽  
Alternative Fuels ◽  
Methyl Esters ◽  
Direct Injection ◽  
Engine Performance ◽  
Experimental Investigations ◽  
Emission Analysis ◽  
Performance And Emission ◽  
Direct Injection Diesel Engine ◽  
Moringa Oil

World at present is confronted with the twin crisis of fossil fuel depletion and environmental pollution. Rapid escalation in prices and hydrocarbon resources depletion has led us to look for alternative fuels, which can satisfy ever increasing demands of energy as well as protect the environment from noxious pollutants. In this direction an attempt has been made to study a biodiesel, namely Moringa Oil Methyl Esters [MOME]. All the experiments were carried out on a 4.4 kW naturally aspirated stationary direct injection diesel engine coupled with a dynamometer to determine the engine performance and emission analysis for MOME. It was observed that there was a reduction in HC, CO and PM emissions along with a substantial increase in NOx. MOME and its blends had slightly lower thermal efficiency than diesel oil.

scholarly journals Modification of a Direct Injection Diesel Engine in Improving the Ignitability and Emissions of Diesel–Ethanol–Palm Oil Methyl Ester Blends

Energies ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2644 ◽  
Author(s):  
Norhidayah Mat Taib ◽  
Mohd Radzi Abu Mansor ◽  
Wan Mohd Faizal Wan Mahmood
Keyword(s):  
Diesel Engine ◽  
Methyl Ester ◽  
Ambient Temperature ◽  
Palm Oil ◽  
Compression Ratio ◽  
Direct Injection ◽  
Cetane Number ◽  
Engine Performance ◽  
Injection Timing ◽  
Injection Strategies

Blending diesel with biofuels, such as ethanol and palm oil methyl ester (PME), enhances the fuel properties and produces improved engine performance and low emissions. However, the presence of ethanol, which has a small cetane number and low heating value, reduces the fuel ignitability. This work aimed to study the effect of injection strategies, compression ratio (CR), and air intake temperature (Ti) modification on blend ignitability, combustion characteristics, and emissions. Moreover, the best composition of diesel–ethanol–PME blends and engine modification was selected. A simulation was also conducted using Converge CFD software based on a single-cylinder direct injection compression ignition Yanmar TF90 engine parameter. Diesel–ethanol–PME blends that consist of 10% ethanol with 40% PME (D50E10B40), D50E25B25, and D50E40B10 were selected and conducted on different injection strategies, compression ratios, and intake temperatures. The results show that shortening the injection duration and increasing the injected mass has no significant effect on ignition. Meanwhile, advancing the injection timing improves the ignitability but with weak ignition energy. Therefore, increasing the compression ratio and ambient temperature helps ignite the non-combustible blends due to the high temperature and pressure. This modification allowed the mixture to ignite with a minimum CR of 20 and Ti of 350 K. Thus, blending high ethanol contents in a diesel engine can be applied by advancing the injection, increasing the CR, and increasing the ambient temperature. From the emission comparison, the most suitable mixtures that can be operated in the engine without modification is D50E25B25, and the most appropriate modification on the engine is by increasing the ambient temperature at 350 K.

An Investigation Into OME3 on a High Compression Ratio Engine

2020 ◽  
Author(s):  
Simon LeBlanc ◽  
Navjot Sandhu ◽  
Xiao Yu ◽  
Xiaoye Han ◽  
Meiping Wang ◽  
...  
Keyword(s):  
Compression Ratio ◽  
Alternative Fuels ◽  
Cetane Number ◽  
Engine Performance ◽  
High Compression Ratio ◽  
Engine Efficiency ◽  
High Compression ◽  
Combustion Emissions ◽  
Soot Emissions ◽  
Chain Lengths

Abstract For decades, alternative fuels have been studied to further engine efficiency and lower combustion emissions. Of these fuels, biodiesel, alcohols, and ethers have shown advantageous benefits of improved mixing capability or reduced combustion emissions. Ether fuels consist of a range of C-O-C chain lengths that offer various noteworthy fuel properties such as fuel oxygen content and cetane number. In this work, oxymethylene dimethyl ether (OME3) and diesel are used as neat and blended fuels on a single-cylinder high compression ratio engine. Four test fuels are investigated in this work; baseline diesel, two diesel/OME3 blends, and neat OME3 fuel. Engine tests are conducted at an engine load of 6 bar and the intake oxygen concentration is modulated via EGR to realize the resulting engine performance, stability, and exhaust emissions among the test fuels. The results show that blending OME3 fuels with diesel is an effective technique to reduce soot emissions with minimal effect on NOx emissions. Moreover, neat OME3 was capable of emitting low NOx and soot emissions with a lower EGR amount than that of diesel-blends, mitigating negative combustion implication of EGR at high levels.

scholarly journals Optimization of Four Stroke c.i. Engine Performance by using Statistical Techniques (Mathematical Method)

2019 ◽  
Vol 8 (2) ◽  
pp. 1685-1691
Keyword(s):  
Driving Force ◽  
Combustion Engine ◽  
Direct Injection ◽  
Engine Performance ◽  
Oil Prices ◽  
Statistical Techniques ◽  
Emission Standards ◽  
Clean Environment ◽  
Low Emission ◽  
Compact Size

The concern for a clean environment, high oil prices and strict emission standards in research was the driving force behind the internal combustion engine. Popular direct injection engine nutrition with its compact size, low fuel consumption and low emission level. Here is the mathematically using the various statistical methods.

scholarly journals DETERMINE SIMULATION MODEL OF ELECTRONIC CONTROL SYSTEM FOR DIRECT INJECTION COMPRESSION COMBUSTION ENGINE

2019 ◽  
Vol 20 (3) ◽  
pp. 208-224
Author(s):  
Haydar M. Razoqe ◽  
Mahmoud A. Mashkour
Keyword(s):  
Thermodynamic Model ◽  
Combustion Engine ◽  
Direct Injection ◽  
Engine Performance ◽  
Control Unit ◽  
Loop Control ◽  
Electric Control ◽  
Start Of Injection ◽  
Electronic Control System ◽  
Compression Ignition Combustion

The aim of this research is to determine a simulation of an electric control unit (ECU) for direct injection compression ignition combustion engine, in order to improve an engine performance and reduced fuel consumption. The simulation comprises thermodynamic model for determining engine parameters according to Spray Penetration Mixing Length, and imposes in Matlab and Simulink. This model allows closed loop control interferences with Arduino MEGA-2560 to manage amount of injected fuel and start of injection that, could be lead to obtain the optimum thermodynamic energy. The results of thermodynamic model show that, the engine parameters can be related linearly, and matching the other published researches on the same conditions and specifications. The results of (ECU) show synchronization between desired and output signals and appear more accuracy when compared with other methods.

Sign in / Sign up

Export Citation Format

Share Document