scholarly journals Complex processing of tin-lead dross into solders and ligatures

2020 ◽  
pp. 93-98
Author(s):  
B. M. Nemenenok ◽  
G. V. Downar ◽  
A. G. Slutsky ◽  
V. A. Sheinert ◽  
D. O. Kapusta ◽  
...  
Keyword(s):  
Raw Materials ◽  
Metal Component ◽  
Secondary Raw Materials ◽  
Ferrous Metals ◽  
Modern Economy ◽  
Metallurgical Processing ◽  
Valuable Element ◽  
Lead Oxides ◽  
The Cost ◽  
Technological Methods

The use of industrial waste is one of the main problems of the modern economy. In Belarus, there is no primary metallurgical processing of natural raw materials, so the use of secondary materials and production waste is a very relevant and important task for the industry, given into account that the cost of metals extracted from secondary raw materials is several times less than the primary ones.One of the types of such raw materials is tin-lead dross (ash), which consists of tin and lead oxides with inclusions of the metal component beads. The most valuable element in dross is tin, the price of which is much higher than the cost of many non-ferrous metals. The aim of the work was to study the influence of various technological factors on the metallurgical output during the processing of tin-lead ash into solders and ligatures.In this regard the results of previous studies related to the extraction of tin and lead in the processing of secondary raw materials were summarized, and new data on technological methods for deeper metallurgical processing of dross (ash) were presented. This allowed them to develop options for obtaining high-quality solder type POS 61 and ligatures.

scholarly journals The Results of Studying the Technique of Making Golden Horde Products Made of Non-Ferrous Metals (from the Collection of the Volgograd Regional Museum of Local Lore)

2019 ◽  
pp. 61-74
Author(s):  
Kseniya Kovaleva
Keyword(s):  
Raw Materials ◽  
Secondary Raw Materials ◽  
Ferrous Metals ◽  
Subsequent Processing ◽  
Wide Range ◽  
Digital Microscope ◽  
Non Ferrous Metals ◽  
Group 2 ◽  
Large Groups ◽  
Cast Products

Introduction. The article is devoted to the results of tracing research of things made of non-ferrous metals from the collections of Tsarevskoe, Vodyanskoe, and Mechetnoe settlements, stored in the funds of the Volgograd regional museum of local lore. Method. The author used the method of tracing. The digital microscope DigiMicro 2.0. was used to record the results of observation. Analysis. The author studied 63 products and allocated two large groups: 1) cast products and 2) forged products. The study fixed the following operations for cast products: the use of open and closed molds, casting in composite forms, casting by the smelted model, by the impression, liner casting. In group 2, the following methods of forging were singled out: forming forging, punching, drawing and forging of wire, bending, drawing, twisting, hacking, cutting. Soldering was used to connect the elements. After forming, most of the products passed the subsequent processing associated with the removal of defects (primarily post-casting) and the application of decor (hammering, engraving, stamping, polishing). In addition, the decor could be formed during the creation of the mold (cast decor). Results. As a result of the study, it was noted the use of a wide range of techniques and operations with a comparative technological simplicity for most products. It was also noticed that a few things have been specially prepared for the processing, and it demonstrates the use of secondary raw materials.

scholarly journals Metallurgical processing of copper secondary raw materials

Tehnika ◽  
2015 ◽  
Vol 70 (4) ◽  
pp. 616-622
Author(s):  
Miroslav D. Sokić ◽  
Zvonko P. Gulišija ◽  
Ilija B. Ilić ◽  
Branislav R. Marković ◽  
Nada D. Štrbac ◽  
...  
Keyword(s):  
Raw Materials ◽  
Secondary Raw Materials ◽  
Metallurgical Processing

scholarly journals THE POSSIBILITY OF SECONDARY RESOURCE RECOVERY DURING WASTE DISPOSAL SITE RECLAMATION

Detritus ◽  
2021 ◽  
pp. 108-117
Author(s):  
Sliusar Natalia ◽  
Aleksandra Krutova ◽  
Yulia Mozzhegorova ◽  
Stepan Polygalov
Keyword(s):  
Raw Materials ◽  
The Other ◽  
Disposal Site ◽  
Waste Disposal Site ◽  
Soil Material ◽  
Secondary Raw Materials ◽  
Landfill Mining ◽  
Mining Project ◽  
Mining Projects ◽  
The Cost

Nowadays, Russian waste management policies demand the closure and elimination of dumpsites and landfills historically located in the vicinity of populated areas, with no reference to geological and hydrological conditions. Landfill mining is one of the technical solutions for old dumpsite reclamation. The unique feature of this study is the application of an integrated scenario approach in the evaluation of landfill mining projects. This approach is based on a scenario matrix that compares costs and revenues for each scenario, depending on resource and technological capabilities on the one hand, and prevailing economic conditions on the other. It was revealed that for large dumpsites the cost of landfill mining project with waste excavation and redisposal, using landfill soil material, and the recovery of secondary raw materials is several times higher than the cost of baseline dumpsite reclamation. This study shows that implementation of landfill mining projects is feasible for relatively small dumpsites with a low object base area load. The age of a landfill, among the other parameters, has an impact on the economic efficiency of landfill mining project. According to the study the older the landfill is, the higher the content of landfill soil and the lower the amount of secondary raw materials available. As a result, the efficiency and cost of sorting technologies for soil material and secondary raw materials are key factors that determine the economic feasibility of landfill mining during waste disposal site reclamation. Within each scenario, the factors that most influence the total cost are identified.

Identyfikacja kosztów pogorszenia reputacji przedsiębiorstwa z perspektywy interesariuszy

2014 ◽  
pp. 10-15
Author(s):  
Danuta Szwajca ◽  
Alina Rydzewska ◽  
Tomasz Nawrocki
Keyword(s):  
Cost Analysis ◽  
Economic Costs ◽  
Crisis Situation ◽  
Modern Economy ◽  
The Cost ◽  
A Company ◽  
Crisis Situations

In the realities of modern economy even the best-managed company is not able to avoid threats and bad decisions, that can cause a crisis. Each crisis situation, that a company experiences, generates not only measurable economic costs, but also more difficult to assess and measure costs of a deteriorated reputation. These costs are the result of infringement of interests or failing to satisfy different stakeholders expectations. The aim of this article is an attempt to identify the cost of reputation deterioration in the context of the various interests of stakeholders groups. In the first part, the paper presents the effects of good and bad reputation, the reputation "contamination" path in a crisis situation and a cost analysis caused by it. The second part is empirical, where the identification of crisis situations measurable costs and reputation deterioration based on the examples of three selected companies was performed.

SELISIH BIAYA PRODUKSI SEBAGAI ALAT PENGENDALIAN MANAJEMEN PT INDO PUSAKA BERAU

2019 ◽  
Vol 3 (02) ◽  
pp. 397
Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM
Keyword(s):  
Raw Materials ◽  
Field Research ◽  
Analytical Tool ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Library Research ◽  
The Difference ◽  
The Cost

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  

scholarly journals Organizational, technical and economic fundamentals of waste management and monitoring

2020 ◽  
Vol 164 ◽  
pp. 08031
Author(s):  
Evgeniy Velichko ◽  
Edward Tshovrebov ◽  
Ural Niyazgulov
Keyword(s):  
Legal Status ◽  
Raw Materials ◽  
Economic Regulation ◽  
Economic Activities ◽  
Renewable Raw Materials ◽  
Secondary Resources ◽  
Secondary Raw Materials ◽  
Production And Consumption ◽  
Level Of Use ◽  
Goals And Objectives

The article deals with issues of monitoring, planning, organizational and technical support, economic regulation and improving the efficiency of the infrastructure for processing, recycling and disposal of waste, resource conservation and management of secondary resources, their use as secondary raw materials for production, services, work and power generation. The Russian Federation has significant potential for economic growth due to the efficient use of secondary resources from billions of tons of generated production and consumption waste annually. These ecologically unsafe anthropogenic objects can be characterized as a source of valuable renewable raw materials, material and fuel and energy resources. However, the scale and level of use of various types of secondary resources are characterized by considerable unevenness and depend on the demand for secondary raw materials, the resource value of the waste, the environmental situation arising from treating them as environmental polluters, on the real economic conditions that determine the profitability of each specific type. economic activities that use secondary resources for the manufacture of products, works, services, energy production. The methods of monitoring the industry for the treatment, disposal and disposal of waste are: information-analytical, information-statistical, sociological, geo-information. The legal status of the monitoring system of the industry for the treatment, disposal and disposal of waste is determined by the limitations of its functionality within the framework of the goals and objectives facing it.

Preparation of Alternative Hydraulic Binder Based on Secondary Raw Materials

2014 ◽  
Vol 1000 ◽  
pp. 12-15
Author(s):  
Jiří Švec ◽  
Tomáš Opravil ◽  
Jiří Másilko
Keyword(s):  
Portland Cement ◽  
Raw Materials ◽  
Construction Materials ◽  
High Volume ◽  
Point Of View ◽  
Hydraulic Lime ◽  
Combustion Gases ◽  
Secondary Raw Materials ◽  
Hydraulic Binder ◽  
Massive Scale

Reusing and recycling of secondary raw materials from high-volume industrial productions (especially form construction materials and binders fabrications) is very important way of conserving environment and it is also interesting from the economical point of view. The production of common hydraulic binders, especially Portland cement, burdens the environment with considerable amount of combustion gases and consumes energy in massive scale. Alternative (low – energy) binder can be used as Portland cement substitution in applications with lower mechanical properties requirements. Mined limestone wash sediments contain large amount of clay components, but there is also indispensable share of fine calcite. This composition makes these sediments a promising material for the preparation of hydraulic binders as Roman cement or hydraulic lime.

Use of Sugarcane Bagasse Ashes as Raw Material in the Replacement of Fluxes for Applications on Porcelain Tile

2016 ◽  
Vol 881 ◽  
pp. 383-386 ◽  
Author(s):  
Raimundo J.S. Paranhos ◽  
Wilson Acchar ◽  
Vamberto Monteiro Silva
Keyword(s):  
Mechanical Properties ◽  
Environmental Impact ◽  
Physical Properties ◽  
Sugarcane Bagasse ◽  
Sintering Temperature ◽  
Raw Materials ◽  
Raw Material ◽  
The Cost ◽  
Potential Use ◽  
Porcelain Tile

This study evaluated the potential use of Sugarcane Bagasse Ashes (SBA) as a flux, replacing phyllite for the production of enamelled porcelain tile. The raw materials of the standard mass components and the SBA residue were characterized by testing by XRF, XRD, AG, DTA and TGA. Test samples were fabricated, assembled in lots of 3 units and sintered at temperatures of 1150 ° C to 1210 ° C. The results of the physical properties, mechanical properties and SEM of the sintered samples, showed that the formulation, G4 - in which applied 10% of SBA replacing phyllite, sintering temperature 1210 ° C showed better performance as the previously mentioned properties due to the formation of mullite crystals, meeting the prerequisites of standards for enamelled porcelain tile, while reducing the environmental impact and the cost of production.

STATE AND PROSPECTS OF PROCESSING OF SECONDARY RAW MATERIALS OF WINE-MAKING IN UKRAINE

2021 ◽  
Vol 15 (1) ◽  
Author(s):  
L. Osipova ◽  
O. Radionova ◽  
L. Tkachenko ◽  
T. Abramova
Keyword(s):  
Agricultural Land ◽  
Animal Feed ◽  
Raw Materials ◽  
Acid Soil ◽  
Biologically Active ◽  
Limiting Factor ◽  
Wine Making ◽  
Secondary Raw Materials ◽  
Use Of Resources ◽  
Wide Range

The analysis of the current state of processing of secondary raw materials of wine-making in Ukraine is given. It is proved that the latter is a rich source of biologically active compounds, including phenolic ones, which makes it possible to use it for the production of a wide range of products (raccoon, polyphenol extracts, tartaric acid, beverages, fertilizers, grape oil, cake, vitamin D, animal feed, food powder, abrasives) with high consumer value for various industries: food, pharmaceutical, perfume and cosmetics, chemical, feed, etc. In the light of modern research, the role of phenolic compounds as essential nutrition factors that cannot remain out of the field of view of physiologists, pharmacologists, and food hygiene specialists is shown. However, currently in Ukraine there are no specialized enterprises for complex processing of secondary raw materials of winemaking; traditional technologies are not effective from a technological, economic and environmental point of view, which indicates not rational use of resources and loss of material resources; there are no systematic studies on physical and chemical, microbiological, Toxicological composition in order to determine the optimal direction of its use. A limiting factor is also the lack of comparative analysis of innovative domestic and foreign technologies for processing secondary raw materials of winemaking. In the vast majority of cases, in particular, combs and pomace are taken out of control to agricultural land without special treatment, which leads to acid soil erosion and pollution of the environment with metabolites of micromycetes, increasing one of the global problems of mankind-environmental. At the present stage of technological development, there are a number of innovative developments in the field of processing secondary raw materials, in particular grape pomace, in order to obtain biologically active additives, the limiting factor for the introduction of which is the lack of domestic and expensive imported equipment. A promising way to solve the existing problems is to create a mechanism that will unite the interests of wineries (producers of secondary raw materials of winemaking), processing enterprises (producers of products from secondary raw materials of winemaking), scientists and potential consumers of innovative products. Consolidation of the above-mentioned institutions and enterprises is possible by creating clusters for the development and implementation of innovative technologies and equipment

Sign in / Sign up

Export Citation Format

Share Document