scholarly journals Design and Analysis of CNTFET based VLSI Interconnects by Using PVT Variation

2021 ◽  
Author(s):  
Ajay Kumar Dadoria ◽  
Narendra Kumar Garg ◽  
Vivek Singh Kushwah ◽  
Manisha Pattanaik
Keyword(s):  
Digital Circuits ◽  
Leakage Power ◽  
Performance Parameters ◽  
New Techniques ◽  
Vlsi Interconnects ◽  
Digital Electronics ◽  
Spice Model ◽  
On Chip ◽  
Carbon Nano Tube ◽  
The Impact

Abstract With the quick progress in the area of digital electronics results in miniaturization of semiconductor Industries. In Deep Sub Micron regime, because of leakage current, power consumption is turn out to be a major issue; hence constant efforts are being made by the researchers for investigating the various ways to minimize this. There are various methods available for the same and out of several available methods use of Carbon Nano-tube technology is a promising way to design low power circuits efficiently. Here new techniques are introduced for the reduction of leakage power. Here in this work, comparison of the main performance parameters of Copper on chip nano-interconnect with CNTFET has been done. We have measured the impact of ION and IOFF current by applying Process variation in CU and CNT- Interconnects with the variation of Tubes at 32nm technology and analysed the performance of the digital circuits with scaling of technology. The different kind of simulation outcomes indicates that by applying 10% of deviation from normal value in different device characteristics parameters such as Length of Gate (LTube) of the Tube, Width (WTube) of the Tube, Threshold Voltage (Vth) of the Tube, Thickness (tot) of Tube and Source & Drain Doping concentration with Cu and CNTFET interconnects for NFET and PFET with the variation of tubes from 1 to 16. All the experimental outcomes are achieved by using HSPICE simulator using SPICE model of CU and CNT at27oC temperature by using 32nm Berkley Predictive Technology module.

Implementation of a High-Precision pH Sensor

2013 ◽  
Vol 373-375 ◽  
pp. 358-362
Author(s):  
Zhan Wei Xu ◽  
Gui Lin Zheng
Keyword(s):  
High Precision ◽  
Measurement Accuracy ◽  
Ph Sensor ◽  
Operational Amplifiers ◽  
Full Description ◽  
Performance Parameters ◽  
Ad Converter ◽  
On Chip ◽  
The Impact ◽  
Wire Resistance

A high-precision pH sensor based on electrochemical principle is proposed in the paper. The principle of the sensor, the performance parameters of MCU, hardware architecture and experiment are introduced. The NEC microprocessor, which is low-power and high stability, is adopted as core processor. The three operational amplifiers same-phase parallel amplifying circuit not only matches the impendence of the pH combination electrode, but also eliminates the impact of wire resistance on pH measurement. The system's capacity of resisting disturbance is improved. Using 18-bit AD converter, which has programmable amplifier on chip, improves measurement accuracy. Both theoretical analysis and experimental results show the effectiveness of the pH sensor. A full description of the pH sensor and implementation are presented.

scholarly journals Imaging with Coherent X-rays: From the Early Synchrotron Tests to SYNAPSE

2021 ◽  
Vol 7 (8) ◽  
pp. 132
Author(s):  
Giorgio Margaritondo ◽  
Yeukuang Hwu
Keyword(s):  
Human Brain ◽  
International Collaboration ◽  
Phase Contrast ◽  
Asia Pacific ◽  
X Rays ◽  
New Techniques ◽  
Simple Description ◽  
Contrast Radiography ◽  
The Impact ◽  
Extract Information

The high longitudinal and lateral coherence of synchrotron X-rays sources radically transformed radiography. Before them, the image contrast was almost only based on absorption. Coherent synchrotron sources transformed radiography into a multi-faceted tool that can extract information also from “phase” effects. Here, we report a very simple description of the new techniques, presenting them to potential new users without requiring a sophisticated background in advanced physics. We then illustrate the impact of such techniques with a number of examples. Finally, we present the international collaboration SYNAPSE (Synchrotrons for Neuroscience—an Asia-Pacific Strategic Enterprise), which targets the use of phase-contrast radiography to map one full human brain in a few years.

scholarly journals Multi-platform app-embedded model for hybrid air-breathing rocket-cycle engine in hypersonic atmospheric ascent

2021 ◽  
pp. 1-23
Author(s):  
S.E. Tsentis ◽  
V.G. Gkoutzamanis ◽  
A.D. Gaitanis ◽  
A.I. Kalfas
Keyword(s):  
Specific Impulse ◽  
Performance Parameters ◽  
Interested Reader ◽  
Component Level ◽  
Air Breathing ◽  
Evaluation Of Performance ◽  
Embedded Model ◽  
The Impact ◽  
Rocket Technology ◽  
Engine Concept

ABSTRACT This paper presents a performance analysis on a novel engine concept, currently under development, in order to achieve hybrid air-breathing rocket technology. A component-level approach has been developed to simulate the performance of the engine at Mach 5, and the thermodynamic interaction of the different working fluids has been analysed. The bypass ramjet duct has also been included in the model. This facilitates the improved evaluation of performance parameters. The impact of ram drag induced by the intake of the engine has also been demonstrated. The whole model is introduced into a multi-platform application for aeroengine simulation to make it accessible to the interested reader. Results show that the bypass duct modelling increases the overall efficiency by approximately 7%. The model calculates the specific impulse at approximately 1800 seconds, which is 4 times higher than any chemical rocket.

237 Stable Performance with Reduced Antibiotic Use in Piglets Vaccinated with an E. coli F4/F18 Vaccine for the Prevention of F18-ETEC Post-weaning Diarrhea

2021 ◽  
Vol 99 (Supplement_1) ◽  
pp. 139-140
Author(s):  
Frédéric A Vangroenweghe
Keyword(s):  
Antibiotic Use ◽  
Watery Diarrhea ◽  
Economic Losses ◽  
Standard Group ◽  
Performance Parameters ◽  
Oral Vaccination ◽  
E Coli ◽  
Technical Performance ◽  
Stable Performance ◽  
The Impact

Abstract Post-weaning Escherichia coli diarrhea (PWD) remains a major cause of economic losses for the pig industry. PWD, caused by enterotoxigenic E. coli (ETEC), typically provokes mild to severe watery diarrhea between 5–10 days after weaning. Recently, an oral live bivalent E. coli F4/F18 vaccine (Coliprotec® F4/F18; Elanco) was approved on the European market, which reduces the impact of PWD provoked by F4-ETEC and F18-ETEC. The objective was to compare technical results and antibiotic use following E. coli F4/F18 vaccination with previous standard therapeutic approach under field conditions. A 1600-sow farm (weaning at 26 days) with diagnosed problems of PWD due to F18-ETEC was selected. Piglets were vaccinated at 21 days with the oral live bivalent E. coli F4/F18 vaccine. At weaning, no standard group medication (ZnO and antibiotics) was applied for prevention of PWD. Several performance parameters were collected: treatment incidence (TI100), mortality and days in nursery. Statistical analysis was performed using JMP 14.0 – comparison of means. Oral E. coli F4/F18 vaccination significantly reduced TI100 (7 ± 2 days to 0 ± 1 days; P < 0.05). Mortality rate remained stable (2.05% in Control to 1.96% in Vaccinated group; P < 0.05). Days in nursery (40 ± 3 days) remained at the same level compared to pre-vaccination. The results show that live E. coli F4/F18 vaccination against PWD has led to similar technical performance parameters and mortality, in combination with a significant reduction in medication use. In conclusion, control of PWD through oral vaccination is a successful option in order to prevent piglets from the negative clinical outcomes of F18-ETEC infection during the post-weaning period.

scholarly journals Thermographic Study of Chip Temperature in High-Speed Dry Milling Magnesium Alloys

2016 ◽  
Vol 7 (2) ◽  
pp. 86-92 ◽  
Author(s):  
Józef Kuczmaszewski ◽  
Ireneusz Zagórski ◽  
Piotr Zgórniak
Keyword(s):  
Temperature Measurement ◽  
Magnesium Alloys ◽  
High Speed ◽  
Machining Process ◽  
Dry Milling ◽  
Technological Parameters ◽  
Chip Temperature ◽  
Thermographic Study ◽  
On Chip ◽  
The Impact

Abstract This paper presents an overview of the state of knowledge on temperature measurement in the cutting area during magnesium alloy milling. Additionally, results of own research on chip temperature measurement during dry milling of magnesium alloys are included. Tested magnesium alloys are frequently used for manufacturing elements applied in the aerospace industry. The impact of technological parameters on the maximum chip temperature during milling is also analysed. This study is relevant due to the risk of chip ignition during the machining process.

Pathfinder Algorithm Modification for CPLD and FPGA Routing Stage

2021 ◽  
Vol 26 (5) ◽  
pp. 399-409
Author(s):  
M.A. Zapletina ◽  
◽  
S.V. Gavrilov ◽  
◽  
Keyword(s):  
Computer Aided Design ◽  
Digital Circuits ◽  
Routing Algorithm ◽  
Design Flow ◽  
Negative Effect ◽  
Industrial Projects ◽  
Placement And Routing ◽  
Aided Design ◽  
The Impact

One of the main advantages of FPGA and CPLD is the high development speed; therefore, the importance of effective computer-aided design tools for modern microcircuits of these classes cannot be overestimated. Placement and routing are the most time-consuming stages of FPGA/CPLD design flow. The quality of results of these stages is crucial to the final perfor-mance of custom digital circuits implemented on FPGA/CPLD. The paper discusses an approach to accelerating the routing stage within the layout synthesis flow for FPGA/CPLD by introducing a few algorithmic improvements to a routing procedure. The basic routing algorithm under study is a modified Pathfinder for a mixed routing resource graph. Pathfinder is a well-known negotiation-based routing algorithm that works on the principle of iteratively eliminating congestions of chip routing resources. For experiments, the sets of test digital circuits ISCAS'85, ISCAS'89, LGSynth'89 and several custom industrial projects were used. The impact of the proposed algorithmic improvements was analyzed using four FPGA/CPLD architectures. It has been established that due to the improvements of the algorithm proposed in the paper, the average reduction in routing time was from 1.3 to 2.6 times, depending on the FPGA/CPLD architecture, with no significant negative effect on the timing characteristics of the designed circuits.

Effect of Tensile Strain on Performance Parameters of Different Structures of MoS2 Monolayer

2021 ◽  
Author(s):  
Priya kaushal ◽  
Tarun Chaudhary ◽  
Gargi Khanna
Keyword(s):  
Tensile Strain ◽  
Computational Study ◽  
Level Structure ◽  
Charge Carriers ◽  
Performance Parameters ◽  
Mos2 Monolayer ◽  
Higher Temperature ◽  
Silicon Doped ◽  
The Impact ◽  
Biaxial Tensile Strain

Abstract The present work is based on the computational study of MoS2 monolayer and effect of tensile strain on its atomic level structure. The bandgap for MoS2 monolayer, defected MoS2 monolayer and Silicon-doped monolayer are 1.82 eV (direct bandgap), 0.04 (indirect bandgap) and 1.25eV (indirect bandgap), respectively. The impact of tensile strain (0-0.7%) on the bandgap and effective mass of charge carriers of these three MoS2 structure has been investigated. The bandgap decrease of 5.76%, 31.86% and 6.03% has been observed in the three structures for biaxial strain while the impact of uniaxial strain is quite low. The impact of higher temperature on the bandgap under biaxial tensile strain has been also analyzed in this paper. These observations are extremely important for 2D material-based research for electronic applications.

scholarly journals RANCANGAN RANGKAIAN ANTI BOUNCING UNTUK RANGKAIAN DIGITAL

Sutet ◽  
2018 ◽  
Vol 7 (1) ◽  
pp. 24-31
Author(s):  
Redaksi Tim Jurnal
Keyword(s):  
Electric Current ◽  
Input Signal ◽  
Input Data ◽  
Digital Circuits ◽  
Electronic Circuit ◽  
Digital Electronics ◽  
Mechanical Contacts ◽  
Mechanical Switch

Push-On switches or toggle switches and mechanical relays are mechanical contacts made of metal which, when supplied with electric current, will result in a spike of electrical sparks, called Bouncing Effects. Bounce effects are often a problem in digital circuits, especially in digital electronics circuits, because these Bounce Effects will cause the value of data or signals coming into the circuit inaccurate or indeterminate, when the mechanical switch is pressed as input data. This will undoubtedly lead to undesirable conditions and must be overcome with an electronic circuit called De-Bounce for the data or input signal to be more certain.

Sign in / Sign up

Export Citation Format

Share Document