scholarly journals Electrospinning of Liquefied Banana Stem Residue in Conjugation with Hydroxyapatite Nanocrystals: Towards New Scaffolds for Bone Tissue Engineering

2021 ◽  
Author(s):  
Mehdi Sadat-Shojai ◽  
Milad Asadnia
Keyword(s):  
Cellulose Nanofibers ◽  
Structural Similarity ◽  
Morphological Characterization ◽  
Mechanical Tests ◽  
Fiber Texture ◽  
Morphological Transformation ◽  
High Structural Similarity ◽  
Electrospinning Method ◽  
Hydroxyapatite Nanocrystals

Abstract Electrospun fibers have high structural similarity to the extracellular matrix (ECM) of natural bone. Some researchers have tried to fabricate cellulose nanofibers using electrospinning method, although the fabricated fibers usually exhibited a non-uniform texture. Moreover, the fabricated mats always suffer from low biological, mechanical and structural properties. Thus, the objective of this study was first to produce a naturally occurring cellulose from banana pseudo-stem through the combination of liquefaction and bleaching processes. The native cellulose was then tried to electrospun in order to determine how a systematic approach based on a Taguchi L9 orthogonal array can be used to fabricate a defect-free fibrous mat. Finally, the electrospun cellulose mats incorporated with hydroxyapatite (HA) nanoparticles were fabricated to generate a new fibrous nanocomposite with enhanced biological and mechanical characteristics. The results revealed that among the electrospinning parameters, cellulose concentration of solution and applied voltage had the greatest effect on the morphology of the fibers. The morphological characterization of the fibrous nanocomposites showed that fibrous cellulose/HA mats had a uniform fiber texture without any significant bead, splashing or particle agglomeration. According to the mechanical tests, the samples containing the higher concentration of HA had a significantly higher elastic modulus and tensile strength. The results obtained from bioactivity analysis indicated an interesting morphological transformation into a flake-like structure which confirmed the high bioactivity of the scaffolds. Accordingly, encapsulation of HA nanoparticles inside the cellulose in the fibrous form can be promising for bone regeneration applications.

Morphological Characterization of Mycobacteriophage R1

1974 ◽  
Vol 32 ◽  
pp. 254-255
Author(s):  
B. L. Soloff ◽  
T. A. Rado
Keyword(s):  
Carbon Source ◽  
Stationary Phase ◽  
Growth Phase ◽  
Minimal Medium ◽  
Morphological Characterization ◽  
Logarithmic Growth Phase ◽  
Complete Lysis ◽  
Lysogenic Culture ◽  
Logarithmic Growth

Mycobacteriophage R1 was originally isolated from a lysogenic culture of M. butyricum. The virus was propagated on a leucine-requiring derivative of M. smegmatis, 607 leu−, isolated by nitrosoguanidine mutagenesis of typestrain ATCC 607. Growth was accomplished in a minimal medium containing glycerol and glucose as carbon source and enriched by the addition of 80 μg/ ml L-leucine. Bacteria in early logarithmic growth phase were infected with virus at a multiplicity of 5, and incubated with aeration for 8 hours. The partially lysed suspension was diluted 1:10 in growth medium and incubated for a further 8 hours. This permitted stationary phase cells to re-enter logarithmic growth and resulted in complete lysis of the culture.

Morphological Characterization of Rhinacanthus Species of Sri Lanka

Planta Medica ◽  
2010 ◽  
Vol 76 (05) ◽  
Author(s):  
APPR Amarasinghe ◽  
RP Karunagoda ◽  
DSA Wijesundara
Keyword(s):  
Sri Lanka ◽  
Morphological Characterization

Density and morphological characterization of bacteria in integrated and exclusive production systems

2020 ◽  
Vol 13 (11) ◽  
pp. 1
Author(s):  
A. R. B. Zanco ◽  
A. Ferreira ◽  
G. C. M. Berber ◽  
E. N. Gonzaga ◽  
D. C. C. Sabino
Keyword(s):  
Bacterial Community ◽  
Rainy Season ◽  
Production Systems ◽  
Cropping System ◽  
Morphological Characterization ◽  
Native Forest ◽  
Exclusive Production ◽  
Colony Forming Units

The different integrated production systems can directly interfere with its bacterial community. The present study aimed to assess density, bacterial diversity and the influence of dry and rainy season in different integrated and an exclusive production system. The fallow and a native forest area was assessed to. Samples were collected in 2012 March and September. The isolation were carried out into Petri dishes containing DYGS medium. The number of colony forming units (CFU) was counted after 48 hours and. The bacterial density ranged between 106 and 107 CFU g-1 soil. The crop system affected the dynamics of the bacterial community only in the rainy season. The rainy season showed greater density of total bacteria when compared to the dry period regardless of the cropping system. The dendrograms with 80 % similarity showed thirteen and fourteen groups in the rainy and dry seasons. Isolates with the capacity to solubilize phosphate in vitro were obtained from all areas in the two seasons, but this feature has been prevalent in bacteria isolated during the rainy season

Characterization of Antibacterial-Producing Endophytic Fungi of Syzygiumpolyanthum Leaves

2020 ◽  
Vol 20 (4) ◽  
pp. 448-454
Author(s):  
Rahmita Burhamzah ◽  
Gemini Alam ◽  
Herlina Rante
Keyword(s):  
Molecular Characterization ◽  
Endophytic Fungi ◽  
Morphological Characterization ◽  
Test Method ◽  
Analysis Method ◽  
Nitrogen Base ◽  
Rdna Genes ◽  
Antibacterial Screening ◽  
Planting Method

Background: Endophytic fungi live in plants’ tissue and can produce the same bioactive compounds as its host plant produces. Syzygiumpolyanthum leaves have known to be one of the antibacterial compound producers. Aim and Objective: This study aimed to characterize morphologically, microscopically, and molecularly the antibacterial-producing endophytic fungi of Syzygiumpolyanthum leaves. Methods: The isolation of endophytic fungi was done by fragment planting method on PDA medium. The antibacterial screening was performed using the antagonistic test as the first screening followed by the disc diffusion test method. The morphological characterization was based on isolate’s mycelia color, growth pattern, margin, and surface texture of the colony, while the microscopic characterization was based on its hyphae characteristics. The molecular characterization of the isolate was done by nitrogen base sequence analysis method on nucleotide constituent of ITS rDNA genes of the isolate. Results: The results found that isolate DF1 has antibacterial activity against E.coli, S.aureus, P.acne, and P.aeruginosa, with the greatest inhibition at 10% concentration of broth fermentation extract on S.aureus with a diameter of inhibition of 13.77 mm. Conclusion: Based on macroscopic, microscopic, and molecular characterization, DF1 isolate is similar to Ceriporialacerate.

scholarly journals Microscopic Image Segmentation and Morphological Characterization of Novel Chitosan/Silica Nanoparticle/Nisin Films Using Antimicrobial Technique for Blueberry Preservation

Membranes ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 303
Author(s):  
Rokayya Sami ◽  
Schahrazad Soltane ◽  
Mahmoud Helal
Keyword(s):  
Ph Value ◽  
Silica Nanoparticle ◽  
Morphological Characterization ◽  
Aerobic Bacteria ◽  
Nano Materials ◽  
Elongation At Break ◽  
Stable Suspension ◽  
Average Size ◽  
Material Ductility

In the current work, the characterization of novel chitosan/silica nanoparticle/nisin films with the addition of nisin as an antimicrobial technique for blueberry preservation during storage is investigated. Chitosan/Silica Nanoparticle/N (CH-SN-N) films presented a stable suspension as the surface loads (45.9 mV) and the distribution was considered broad (0.62). The result shows that the pH value was increased gradually with the addition of nisin to 4.12, while the turbidity was the highest at 0.39. The content of the insoluble matter and contact angle were the highest for the Chitosan/Silica Nanoparticle (CH-SN) film at 5.68%. The use of nano-materials in chitosan films decreased the material ductility, reduced the tensile strength and elongation-at-break of the membrane. The coated blueberries with Chitosan/Silica Nanoparticle/N films reported the lowest microbial contamination counts at 2.82 log CFU/g followed by Chitosan/Silica Nanoparticle at 3.73 and 3.58 log CFU/g for the aerobic bacteria, molds, and yeasts population, respectively. It was observed that (CH) film extracted 94 regions with an average size of 449.10, at the same time (CH-SN) film extracted 169 regions with an average size of 130.53. The (CH-SN-N) film presented the best result at 5.19%. It could be observed that the size of the total region of the fruit for the (CH) case was the smallest (1663 pixels), which implied that the fruit lost moisture content. As a conclusion, (CH-SN-N) film is recommended for blueberry preservation to prolong the shelf-life during storage.

scholarly journals Morphological characterization of the Apis mellifera drones in the Southern Urals

2020 ◽  
Vol 604 ◽  
pp. 012030
Author(s):  
N R Gazizova ◽  
A G Mannapov ◽  
V N Sattarov ◽  
V G Semenov ◽  
A I Skvortsov ◽  
...  
Keyword(s):  
Apis Mellifera ◽  
Southern Urals ◽  
Morphological Characterization ◽  
The Southern Urals

Biochemical and Morphological Characterization of Heterotrophic Crypthecodinium cohnii and Chlorella vulgaris Cell Walls

2021 ◽  
Vol 69 (7) ◽  
pp. 2226-2235
Author(s):  
Greta Canelli ◽  
Patricia Murciano Martínez ◽  
Sean Austin ◽  
Mark E. Ambühl ◽  
Fabiola Dionisi ◽  
...  
Keyword(s):  
Chlorella Vulgaris ◽  
Cell Walls ◽  
Morphological Characterization ◽  
Crypthecodinium Cohnii

scholarly journals Facile Synthesis and Characterization of Palm CNF-ZnO Nanocomposites with Antibacterial and Reinforcing Properties

2021 ◽  
Vol 22 (11) ◽  
pp. 5781
Author(s):  
Janarthanan Supramaniam ◽  
Darren Yi Sern Low ◽  
See Kiat Wong ◽  
Loh Teng Hern Tan ◽  
Bey Fen Leo ◽  
...  
Keyword(s):  
Plant Biomass ◽  
Cellulose Nanofibers ◽  
High Strength ◽  
Salmonella Typhi ◽  
Particle Sizes ◽  
Mechanical Reinforcement ◽  
Uniform Size ◽  
Preparation Methods ◽  
Potential Applications

Cellulose nanofibers (CNF) isolated from plant biomass have attracted considerable interests in polymer engineering. The limitations associated with CNF-based nanocomposites are often linked to the time-consuming preparation methods and lack of desired surface functionalities. Herein, we demonstrate the feasibility of preparing a multifunctional CNF-zinc oxide (CNF-ZnO) nanocomposite with dual antibacterial and reinforcing properties via a facile and efficient ultrasound route. We characterized and examined the antibacterial and mechanical reinforcement performances of our ultrasonically induced nanocomposite. Based on our electron microscopy analyses, the ZnO deposited onto the nanofibrous network had a flake-like morphology with particle sizes ranging between 21 to 34 nm. pH levels between 8–10 led to the formation of ultrafine ZnO particles with a uniform size distribution. The resultant CNF-ZnO composite showed improved thermal stability compared to pure CNF. The composite showed potent inhibitory activities against Gram-positive (methicillin-resistant Staphylococcus aureus (MRSA)) and Gram-negative Salmonella typhi (S. typhi) bacteria. A CNF-ZnO-reinforced natural rubber (NR/CNF-ZnO) composite film, which was produced via latex mixing and casting methods, exhibited up to 42% improvement in tensile strength compared with the neat NR. The findings of this study suggest that ultrasonically-synthesized palm CNF-ZnO nanocomposites could find potential applications in the biomedical field and in the development of high strength rubber composites.

Sign in / Sign up

Export Citation Format

Share Document