scholarly journals Effect of functional and technological properties of vegetable shortenings on qualitative characteristics of biscuit

Vestnik MGTU ◽  
2020 ◽  
Vol 23 (3) ◽  
pp. 268-279
Author(s):  
S. Yu. Misteneva ◽  
T. V. Savenkova ◽  
E. A. Demchenko ◽  
N. A. Shcherbakova ◽  
T. V. Gerasimov
Keyword(s):  
Palm Oil ◽  
Milk Fat ◽  
Raw Materials ◽  
Structural Characteristics ◽  
Technological Properties ◽  
Organoleptic Characteristics ◽  
Milk Substitute ◽  
Production Increase ◽  
Confectionery Fat ◽  
Competitive Products

The modern market has strict requirements for competitive products, forcing the manufacturer to implement scientific and technological progress in production, increase labor productivity and product quality, and reduce cost. The unchanged favorite on the confectionery market is sugar biscuits, it is in high demand among all groups of the population, the share of domestic products is more than 85 %. The quality and nutritional value of food products largely depend on the properties and composition of the predominant amount of raw materials, which in the production of sugar cookies are wheat flour, sugar and fat component. In order to update the technological control schemes and optimize the recipe composition of sugar cookies, depending on the type of fat component used, the influence and the relationship between the functional and technological properties of fatty products traditionally used in the production of sugar cookies (margarine, confectionery fat, milk substitute fat, palm oil), and quality characteristics of finished products (structural and mechanical, physicochemical and organoleptic indicators, rheological indicators of emulsion and dough) have been investigated. As a result of the studies, it has been found that the type of fatty products has a significant impact on the development and optimization of technological methods in relation to specific production conditions, the formation of sensory and structural characteristics of the finished product. Recommendations have been developed for optimizing the recipe composition of cookies depending on the type of fat used. In particular, it has been shown that it is advisable to use a milk fat substitute or margarine in products with a simple recipe composition, while the use of palm oil and confectionery fat is more justified in products with a rich recipe composition, in which organoleptic characteristics are formed by the presence of additional raw materials: dairy products, cocoa powder, nuts, dried fruits, etc.

INFLUENCE OF DIETARY FIBRES OF THE PHYTOGENESIS ON THE TECHNOLOGICAL PROPERTIES OF THE DOUGH OF SOFT WAFERS

2018 ◽  
Author(s):  
Ю.Н. НИКОНОВИЧ ◽  
Н.А. ТАРАСЕНКО
Keyword(s):  
Dietary Fiber ◽  
Quality Indicators ◽  
Raw Materials ◽  
Technological Properties ◽  
Dietary Fibers ◽  
Biological Value ◽  
Dietary Fibres ◽  
Permissible Level ◽  
Confectionery Fat ◽  
Optimal Quality

Исследовано влияние гидратированных пшеничных волокон Камецель FW 200 и апельсиновых волокон Citri-Fi 200, внесенных в тесто взамен части кондитерского жира для повышения пищевой и биологической ценности продукта, на свойства мягких вафель. Готовили образцы вафельного теста: контрольный – тесто без добавок, образцы теста с заменой 10, 15 и 20% кондитерского жира на пшеничные волокна Камецель FW 200, образцы теста с заменой 10, 15 и 20% кондитерского жира на апельсиновые волокна Citri-Fi 200 – и определяли технологические свойства изготовленных образцов теста – влажность, плотность и количество оттеков вафельного листа. Установлено, что внесение пищевых волокон Citri-Fi 200 в исследованных дозировках 10, 15 и 20% от массы жира в рецептуру вафельного теста увеличивает количество оттеков выше допустимого уровня, т. е. увеличивает потери сырья. Оптимальные качественные показатели имеет образец вафельного теста с добавкой 15% гидратированных пищевых волокон Камецель FW 200, внесение которых позволит увеличить пищевую ценность кондитерского изделия. The influence of hydrated wheat fibers Kametsel FW 200 and orange fibers Citri-Fi 200, introduced into the dough instead of the confectionery fat to improve the nutritional and biological value of the product on the properties of soft waffles was investigated. Wafer dough samples: control - dough without additives, dough samples with replacement of 10, 15 and 20% confectionery fat by wheat fibers Kametsel FW 200, dough samples with replacement of 10, 15 and 20% confectionery fat by orange fibers Citri-Fi 200 – prepared and determined their technological properties – humidity, density and the number of flows of the wafer sheet. It is established that the introduction of Citri-Fi 200 dietary fibers in the studied dosages of 10, 15 and 20% by weight of fat in the formulation of wafer dough increases the number of flows the dough above the permissible level, i.e. increases the loss of raw materials. A sample of wafer dough with the addition of 15% hydrated dietary fiber Kametsel FW 200 has optimal quality indicators.

scholarly journals The effect of probiotic crops and lipolytic enzymes on the properties of dairy products in the cheese biotechnology under development

2021 ◽  
Vol 11 (2) ◽  
pp. 290-298
Author(s):  
Yu. G. Sturova ◽  
A. V. Grishkova ◽  
V. V. Konshin
Keyword(s):  
Milk Fat ◽  
Nutritional Value ◽  
Raw Materials ◽  
Starter Culture ◽  
Organoleptic Characteristics ◽  
Pregastric Lipase ◽  
Soft Cheese ◽  
Functional Product ◽  
High And Low Temperatures ◽  
Hydrolysis Of

This article aims to evaluate the influence of probiotic microorganisms and pregastric lipase on organoleptic and biochemical characteristics of soft cheese made from a mixture of milk and buttermilk. The study was designed to determine how the temperature and exposure at this temperature affect the growth and development of lactose and bifidobacteria, as well as their quantity in the finished product. In order to increase the biological and nutritional value of the developed soft cheese, protein-carbohydrate raw materials rich in vitamins A, B12, D, E, phosphate and minerals were introduced into the production mixture. The addition of buttermilk increased the biological value of the product and improved its consistency. The taste and consistency of cheese was improved by a pregastric lipase preparation, widely used in the cheesemaking industry for production of various cheeses with high and low temperatures of the second heating. As a result of directed lipolysis, the finished product accumulates free fatty acids and diacylglycerols, acting as plasticizers and affecting the texture and organoleptic characteristics of the cheese. The results show that combining buttermilk and milk in an optimal ratio and addition of lipase produce a product with the best physicochemical parameters and a maximum evaluation of organoleptic characteristics. In the presence of a probiotic starter culture (provided there is a ready-made substrate), an active synthesis of enzymes necessary for the complete hydrolysis of milk fat begins. This all creates a functional product.

scholarly journals Effects of Oils and Fats on the Quality Characteristics, Nutritional Value, and Storage Capacity of Cookies

2022 ◽  
Vol 51 (4) ◽  
pp. 674-689
Author(s):  
Elena Demchenko ◽  
Tatiana Savenkova ◽  
Inessa Mizinchikova
Keyword(s):  
Palm Oil ◽  
Sunflower Oil ◽  
Milk Fat ◽  
Storage Capacity ◽  
Quality Characteristics ◽  
High Oleic Sunflower Oil ◽  
High Oleic ◽  
Fat Substitute ◽  
Confectionery Fat ◽  
And Storage

Introduction. The quality profile and nutritional values of cookies depend on the raw material. The research objective was to study the effect of oils and fats on the quality characteristics and storage capacity of cookies. Study objects and methods. The study involved such types of oils and fats as margarine, confectionery fat, milk fat substitute, palm oil, sunflower oil, and high oleic sunflower oil. It was based on standard methods of sensory, physicochemical, structural, and rheological analyses. Results and discussion. The experimental formulations relied on contemporary dilatory recommendations, consumer acceptability, and traditionality of sensory indicators. The mass fraction of fat was limited to ≤ 18%; added sugars – to ≤ 22%; salt – to ≤ 0.3%. For each type of oil and fat, as set of experiments was performed to define the optimal technological emulsion and dough parameters. Other aspects involved the patterns of moisture transfer, indicators of oxidative spoilage, fatty acid composition, sensory properties, physicochemical and microbiological indicators, storage capacity, etc. The samples with vegetable oils instead of fat had a lower content of saturated fatty acids, which fell from 8–9 to 2–3 g/100 g. However, the risk of oxidative spoilage increased significantly. On storage day 104, the content of linoleic acid in the samples with sunflower oil decreased from 62.0 to 60.4%, while the samples with high oleic sunflower oil maintained the same level of linoleic acid. The samples with confectionery fat and palm oil demonstrated the lowest rate of oxidative processes, while those with margarine and milk fat substitute had the best sensory profile after storage. Conclusion. The cookies with sunflower oil and high oleic sunflower oil appeared to have a shelf life of two months, while for those with milk fat substitute, margarine, palm oil, and confectionery fat it was six months. Further research should focus on various emulsifiers and antioxidants capable of forming bonds with proteins and starch fractions of flour, which could increase the resistance of liquid vegetable oils to oxidation.

scholarly journals Development of technology for functional products on basis of vegetable and fish raw materials

2016 ◽  
Vol 187 (4) ◽  
pp. 254-260
Author(s):  
Valeria A. Potapova ◽  
Olga Ya. Mezenova
Keyword(s):  
Thermal Treatment ◽  
Raw Materials ◽  
Jerusalem Artichoke ◽  
Water Holding Capacity ◽  
Technological Properties ◽  
Organoleptic Characteristics ◽  
Treated Fish ◽  
Size Of Particles ◽  
Safety Indices ◽  
Water Holding

Influence of the time of thermal treatment of sardinella backbones on organoleptic characteristics, water-holding capacity, and size of particles for the minced bones is investigated. Rational parameters for the thermal treatment of backbones are determined. Effect of vegetable additives of Jerusalem artichoke on functional and technological properties of the minced bone systems is examined. Safety indices of the food produced from thermally treated fish wastes are evaluated.

PEMETAAN TEKNOLOGI INDUSTRI KELAPA SAWIT NASIONAL DAN KEBIJAKAN PENGEMBANGANNYA

2013 ◽  
Vol 13 (1) ◽  
Author(s):  
Subiyanto Subiyanto
Keyword(s):  
Palm Oil ◽  
Government Policy ◽  
Value Chain ◽  
Raw Materials ◽  
Value Added ◽  
Oil Industry ◽  
Missing Value ◽  
Technology Capability ◽  
The Government

Palm oil industry in Indonesia has been growing rapidly. But, unfortunately the growth is only effective on upstream industry with low value products, such that potential downstream value added are not explored proportionally. The government is therefore in the process of developing an appropriate policy to strengthen the national palm oil downstream industry. This paper proposes that an approriate policy for developing palm oil downstream industry could be derived from the maps of value chain and existing technology capability of the industry. The result recommends that government policy should emphasize on the supply of raw materials, infrastructure and utilities, as well as developing the missing value chain industry, especially ethoxylation and sulfonation.

Technology and Formation Improvement of Consumer Properties of Cold Appetizers from a Silver Carp in the Roll Form

Food Industry ◽  
2019 ◽  
Vol 4 (4) ◽  
pp. 14-22
Author(s):  
Olesya Sergeevna ◽  
Adelya Bekesheva
Keyword(s):  
Fatty Acids ◽  
Food Industry ◽  
Raw Materials ◽  
Silver Carp ◽  
Essential Amino Acids ◽  
Development Stage ◽  
Roll Forming ◽  
Fish Gelatin ◽  
Organoleptic Characteristics ◽  
Food Value

At the present development stage of fish culinary production special significance has range expanding and technology improving for the following purposes: the available fish resources use; the organoleptic characteristics improvement and the nutritional value and competitiveness increase of products manufactured at the enterprises of the food industry. This study concerns the technology and the consumer properties formation improvement of cold appetizers from silver carp in the form of a roll. Unlike traditional the developed products consist of fillet of a bighead silver carp on a skin and an original stuff from egg, vegetables and mushrooms. The researchers conducted study using conventional and special methods. They recommended to introduce gelatin in a dry powdered at the stage of roll forming form in a recipe of the developed fish rolls. A man tested fish gelatin as anew consistency regulator of the developed products. The traditional and fish gelatin use allows to increase the yield of fish cold appetizers in the form of a roll by 8.0 %. When adding gelatin, there was an improvement in consistency and sensory perception of the product as a whole. The analysis results of biological value showed that the developed dishes, being an important additional source of protein and essential amino acids such as threonine, lysine, valine, may well improve the ration balance. The fatty acids ratio in fish rolls prepared according to new recipes is close to the ideal fat in the ratio of saturated, monounsaturated and polyunsaturated fatty acids (35:45:20) and is determined mainly by the composition of fatty acids in silver carp fat. The developed production will allow to expand the range of the food industry enterprises by cold fish appetizers of high quality and food value from available fish raw materials.

The effectiveness of use RUSMA additive in the rations of lactating cows

2020 ◽  
pp. 28-37
Author(s):  
S. Sukhanova ◽  
N. Pozdnyakova ◽  
F. Yaroslavtsev
Keyword(s):  
Milk Fat ◽  
Raw Materials ◽  
Fat Content ◽  
Feed Additives ◽  
Control Group ◽  
New Mineral ◽  
Milk Productivity ◽  
Black And White ◽  
Lactating Cows ◽  
Experimental Group

The results of researches on the development of new mineral feed additives based on raw materials produced by Uralchem and the study of the eff ectiveness of their use in the rations of lactating cows have been presented in the article. The experiment has been carried out in the conditions of LLC “PF Barabinskoe” in the Dalmatovsky area in the Kurgan region where 3 groups of lactating cows of Black-and-White breed have been formed. Animals in the control group have been received the ration adopted in the farm, the 1st experimental group with the additive RusMA No. 1 at a dose of 150 g, the 2nd experimental group– with the additive RusMA No. 2 at the dose of 350 g. The use of experimental mineral additives in feeding lactating cows allowed us to increase their milk productivity and profi tability of production. At the same time, the best eff ectiveness was shown by the additive RusMA No. 2 at the dose of 350 g/head/day. The use of RusMA additives during the experiment period (105 days) allowed to increase the milk productivity of cows in the 1st experimental group by 6,03 % and in the 2nd experimental group by 8,24 %. Taking into account the fat content in milk, this diff erence was 6,31 and 8,53 %, respectively. The energy value of milk from cows of the experimental groups was higher compared to the control group by 2,45 and 1,76 %, respectively. According to the content of dry matter in milk, cows of the 2nd experimental group exceeded the control and 1st experimental group by 0,39 and 0,12 abs.%, respectively. The maximum milk fat content has been observed in the milk of cows of the 1st experimental group by 0,03 and 0,01 abs.% more than in the control and 2nd experimental groups, respectively. In terms of protein content, the cows of the 2nd experimental group signifi cantly exceeded the control group by 0,10 abs.% and the 1st experimental by 0,04 abs.%. The content of milk sugar in the 2nd experimental group was higher than in the control by 0,30 abs.% and compared to the 1st experimental by 0,11 %. Signifi cantly more calcium and phosphorus were contained in the milk of cows of the 2nd experimental group by 4,58 % (Р ≤ 0,001) and 2,86 % (Р ≤ 0,05), compared with the control group. The expenditures of feed in the EFU for the production of 1 kg of milk in animals of the 2nd experimental group was less by 5,13 % than in control cows and by 2,63 % compared to the 1st experimental group. The prime cost of 1 centner of milk was lower in the 2nd experimental group by 3,94 %, in the 1st experimental group by 2,65 % compared to the control group. The level of profi tability of milk production in the 2nd experimental group was higher by 9,0 and 1,0 abs.% in comparison with the control and 1st experimental groups, respectively.

scholarly journals Emergence of Polymeric Material Utilising Sustainable Radiation Curable Palm Oil-Based Products for Advanced Technology Applications

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1865
Author(s):  
Rida Tajau ◽  
Rosiah Rohani ◽  
Mohd Sofian Alias ◽  
Nurul Huda Mudri ◽  
Khairul Azhar Abdul Halim ◽  
...  
Keyword(s):  
Palm Oil ◽  
Raw Materials ◽  
Raft Polymerization ◽  
Polymeric Materials ◽  
Fine Tuning ◽  
Advanced Technology ◽  
Radiation Processing ◽  
Radiation Mechanisms ◽  
Processing Technologies ◽  
Technology Applications

In countries that are rich with oil palm, the use of palm oil to produce bio-based acrylates and polyol can be the most eminent raw materials used for developing new and advanced natural polymeric materials involving radiation technique, like coating resins, nanoparticles, scaffold, nanocomposites, and lithography for different branches of the industry. The presence of hydrocarbon chains, carbon double bonds, and ester bonds in palm oil allows it to open up the possibility of fine-tuning its unique structures in the development of novel materials. Cross-linking, reversible addition-fragmentation chain transfer (RAFT), polymerization, grafting, and degradation are among the radiation mechanisms triggered by gamma, electron beam, ultraviolet, or laser irradiation sources. These radiation techniques are widely used in the development of polymeric materials because they are considered as the most versatile, inexpensive, easy, and effective methods. Therefore, this review summarized and emphasized on several recent studies that have reported on emerging radiation processing technologies for the production of radiation curable palm oil-based polymeric materials with a promising future in certain industries and biomedical applications. This review also discusses the rich potential of biopolymeric materials for advanced technology applications.

scholarly journals Deep Eutectic Solvents Based Choline Chloride for Enzymatic Biodiesel Production from Degumming Palm Oil

2020 ◽  
Vol 32 (4) ◽  
pp. 733-738 ◽  
Author(s):  
R. Manurung ◽  
Taslim ◽  
A.G.A. Siregar
Keyword(s):  
Palm Oil ◽  
Raw Materials ◽  
Choline Chloride ◽  
Deep Eutectic Solvent ◽  
Deep Eutectic Solvents ◽  
Biodiesel Production ◽  
Chloride Salt ◽  
Enzymatic Reactions ◽  
Potential Applications ◽  
Palm Oil Biodiesel

Deep eutectic solvents (DESs) have numerous potential applications as cosolvents. In this study, use of DES as organic solvents for enzymatic biodiesel production from degumming palm oil (DPO) was investigated. Deep eutectic solvent was synthesized using choline chloride salt (ChCl) compounds with glycerol and 1,2-propanediol. Deep eutectic solvent was characterized by viscosity, density, pH and freezing values, which were tested for effectiveness by enzymatic reactions for the production of palm biodiesel with raw materials DPO. Deep eutectic solvent of ChCl and glycerol produced the highest biodiesel yield (98.98%); weight of DES was only 0.5 % of that of the oil. In addition, the use of DES maintained the activity and stability of novozym enzymes, which was assessed as the yield until the 6th usage, which was 95.07 % biodiesel yield compared with the yield without using DES. Hence, using DES, glycerol in enzymatic biodiesel production had high potentiality as an organic solvent for palm oil biodiesel production

Sign in / Sign up

Export Citation Format

Share Document