scholarly journals ANALYSIS OF QUALITY ASSURANCE ON SISTEM INFORMASI ZAKAT (SIZAKAT) THROUGH SOFTWARE TESTING

2014 ◽  
Vol 9 (2) ◽  
pp. 82
Author(s):  
Abdul Haris ◽  
Wisnu Jatmiko ◽  
Ari Wibisono

Sistem Informasi Zakat (SIZakat) is a web-based information system that is used to assist in the management of zakat in Imam Bonjol Mosque Pondok Labu, South Jakarta. In this thesis, we conducted testing to the SIZakat application to know the quality and the feasibility. We conducted seven kinds of testing: Unit Testing, Integration Testing, Stress Testing, Load Testing, Testing SQL Injection, XSS Injection Testing and User Acceptance Testing. In addition to ensure the quality of SIZakat, the SIZakat test result is expected to be a reference for future quality improvement. Test results show that SIZakat have accurate functionalities, good security, and good performance.

2019 ◽  
Vol 6 (5) ◽  
pp. 467
Author(s):  
Admaja Dwi Herlambang ◽  
Aditya Rachmadi ◽  
Kartika Utami ◽  
Rahmana Ilmi Hakim ◽  
Nurur Rohmah

<p class="Abstrak">Bagian Informasi Kepegawaian dan Komunikasi merupakan sebuah divisi yang ada pada Kantor Regional II Badan Kepegawaian Negara Surabaya. Layanan pengaduan publik oleh Bagian Informasi Kepegawaian dan Komunikasi melalui website memerlukan fitur pengelolaan. Penelitian pengembangan ini menggunakan metode V-Model. Proses pengujian yang dilakukan meliputi <em>unit testing</em>, <em>integration testing</em>, <em>system testing</em>, dan <em>acceptance testing</em>. <em>Unit testing</em> dilakukan dengan basis <em>path testing</em> dan menghasilkan <em>4 independent path</em> dari perhitungan <em>cyclomatic complexity</em> pada kasus uji unit addPIC. <em>Integration testing</em> pada kasus uji fungsi addPIC dari <em>class controller</em> admController dengan fungsi insertPIC dari <em>class</em> <em>model</em> admModel menunjukkan hasil valid. <em>System testing</em> dilakukan terhadap 28 fungsi pada sistem, yang menunjukkan hasil valid. <em>Acceptance testing</em> dilakukan terhadap <em>stakeholder</em> atau <em>user</em> menggunakan <em>black box</em> testing menunjukkan hasil bahwa <em>stakeholder</em> menerima fungsi dalam sistem yang dibuat dan telah sesuai dengan kebutuhan fungsional pada dokumen elisitasi kebutuhan sistem.</p><p class="Abstrak"> </p><p class="Abstrak"><em><strong>Abstract</strong></em></p><p class="Abstract"><em>Staff Information and Communication Division is one of division in State Staffing Agency Regional Office II Surabaya. Public complaint service handled by Staff Information and Communication Division through website require management features. This development research used V-Model method. The testing process includes unit testing, integration testing, system testing, and acceptance testing. Unit testing used the base path testing that produces 4 independent paths from the calculation of cyclomatic complexity in the addPIC unit test case. Integration testing in the test case of the addPIC function from controller class admController with the insertPIC function from model class admModel shows valid results. System testing performed on the 28 system functions show a valid result. Acceptance testing conducted against stakeholders or users using black box testing indicates that the stakeholders have received the system functions and had been in accordance with the functional requirements that exist in the document elicitation system requirements.</em></p><p class="Abstrak"><em><strong><br /></strong></em></p>


2021 ◽  
Vol 2111 (1) ◽  
pp. 012010
Author(s):  
Y I Hatmojo ◽  
S M Azis

Abstract The aims of this research are: (1) producing a mobile applications android based for sensor and transducer field of study on vocational education; (2) know the quality of the product mobile applications android based for sensor and transducer field study on vocational education. The method used is the Software Development Life Cycle with the Waterfall model. The stages in Waterfall model are: (1) requirements definition; (2) system and software design; (3) implementation and unit testing; (4) integration and system testing; (5) operation and maintenance. The black box test results show the performance of Sensor application software can all function properly. While the results of the compatibility test show the application can run on various android systems (at least Android 4.2).


2018 ◽  
Vol 6 (2) ◽  
pp. 54
Author(s):  
Mulyana Mulyana ◽  
Dwi Indah Widya Yanti

Mackerel fish is sea fishs species which are pelagic marine fish groupwhich has a distinctive taste so favored by the people. frozen mackerel is a fishs that is easily damaged. Thus the fishs need to be handling it well. Fishskeep the temperature will affect the quality of the fishs. during storage in the storage and distribution processing. can affect product quality. To decrease the quality of frozen mackerel fishs products need to note the changes that occur either through physical, chemical and biological. It explains research to analyze the quality of fishs products frozen mackerel observe  aspects of Microbiology testing and Appearance. Based on the results of microbiological and organoleptic frozen mackerel fish, it can be conclude that test for microbiological test total plate count (TPC) is below the standard value in accordance with ISO 4110, 2014. for Uju E, coli is negative, Salmonella Test is Begatif, Vibrio Colera test is also negative and Appearance Test Values above 7 quality fish so the test results of Microbiology and poduct organoleptic frozen mackerel safe for consumption as the above test result.


2020 ◽  
Vol 3 (2) ◽  
pp. 332
Author(s):  
Muhammad Bahrudin ◽  
Agata Iwan Candra ◽  
Sigit Winarto

Concrete is one of the construction materials that is widely used. Currently, variations in concrete are being studied. Galvalum waste has high tensile properties but is mild. Its lightweight properties are expected to reduce the weight of the concrete itself. The purpose of this study is to find out the value of strong press, absorption, weight type (E), degree of saturation (Sr), moisture content (Wc), and porosity of the addition of galvalume waste. The method used is a experimental method. Variations in galvalum waste substitution used are 50% and 100% of the aggregate weight is roughT the sample used in the form of a cylinder size of 15cm x 30 cm with the initial quality of fc' 18.67 Mpa. The results of the strong press test showed that the galvalum waste subtitution has not been able to exceed the initial quality of the plan. The highest test result was obtained at a percentage of 50% with a strong press score of FC' 17.94 Mpa. In the percentage, absorption test results are 0.010%, the weight of the type is 2325 kg / m3, the pore number is 0.00232%, the water content is 0.108%, and porosity is 0.00108%.Beton merupakan salah satu bahan konstruksi yang banyak dipergunakan. Saat ini, pengguanaan variasi pada beton sedang banyak diteliti. Limbah galvalum memiliki sifat tarik yang tinggi namun ringan. Sifatnya yang ringan diharapkan mampu mengurangi berat beton itu sendiri. Tujuan dari penelitian ini adalah untuk mengetahui nilai kuat tekan, absorpsi, berat jenis (Ɣ), angka pori (e),derajat kejenuhan (Sr), kadar air (Wc), dan porositas dari penambahan limbah galvalum. Metode yang digunakan merupakan metode eksperimen. Variasi pensubtitusi limbah galvalum yang digunakan yaitu 50% dan 100% dari berat agregat kasar. sampel yang digunakan berbentuk silinder ukuran 15cm x 30 cm dengan mutu awal fc’ 18.67 Mpa. Hasil uji kuat tekan menunjukkan bahwa subtitusi limbah galvalum belum mampu melebihi mutu awal rencana. Hasil uji tertinggi didapat pada prosentase 50% dengan nilai kuat tekan fc’ 17,94 Mpa. Pada prosentase tersebut, didapat hasil uji absropsi yaitu 0,010%,  berat jenis yaitu 2325 kg/m3, angka pori yaitu 0,00232%, kadar air yaitu 0,108% serta porositas yaitu 0,00108%. 


BMJ Open ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. e047731
Author(s):  
Gabriel Recchia ◽  
Claudia R Schneider ◽  
Alexandra LJ Freeman

ObjectivesTo assess the effects of different official information on public interpretation of a personal COVID-19 PCR test result.DesignA 5×2 factorial, randomised, between-subjects experiment, comparing four wordings of information about the test result and a control arm of no additional information; for both positive and negative test results.SettingOnline experiment using recruitment platform Respondi.ParticipantsUK participants (n=1744, after a pilot of n=1657) quota-sampled to be proportional to the UK national population on age and sex.InterventionsParticipants were given a hypothetical COVID-19 PCR test result for ‘John’ who was presented as having a 50% chance of having COVID-19 based on symptoms alone. Participants were randomised to receive either a positive or negative result for ‘John’, then randomised again to receive either no more information, or text information on the interpretation of COVID-19 test results copied in September 2020 from the public websites of the UK’s National Health Service, the USA’s Centers for Disease Control, New Zealand’s Ministry of Health or a modified version of the UK’s wording. Information identifying the source of the wording was removed.Main outcome measuresParticipants were asked ‘What is your best guess as to the percent chance that John actually had COVID-19 at the time of his test, given his result?’; questions about their feelings of trustworthiness in the result, their perceptions of the quality of the underlying evidence and what action they felt ‘John’ should take in the light of his result.ResultsOf those presented with a positive COVID-19 test result for ‘John’, the mean estimate of the probability that he had the virus was 73% (71.5%–74.5%); for those presented with a negative result, 38% (36.7%–40.0%). There was no main effect of information (wording) on these means. However, those participants given the official information from the UK website, which did not mention the possibility of false negatives or false positives, were more likely to give a categorical (100% or 0%) answer (UK: 68/343, 19.8% (15.9%–24.4%); control group: 42/356, 11.8% (8.8%–15.6%)); the reverse was true for those viewing the New Zealand (NZ) wording, which highlighted the uncertainties most explicitly (20/345: 5.8% (3.7%–8.8%)). Aggregated across test result (positive/negative), there was a main effect of wording (p<0.001) on beliefs about how ‘John’ should behave, with those seeing the NZ wording marginally more likely to agree that ‘John’ should continue to self-isolate than those viewing the control or the UK wording. The proportion of participants who felt that a symptomatic individual who tests negative definitely should not self-isolate was highest among those viewing the UK wording (31/178, 17.4% (12.5%–23.7%)), and lowest among those viewing the NZ wording (6/159, 3.8% (1.6%–8.2%)). Although the NZ wording was rated harder to understand, participants reacted to the uncertainties given in the text in the expected direction: there was a small main effect of wording on trust in the result (p=0.048), with people perceiving the test result as marginally less trustworthy after having read the NZ wording compared with the UK wording. Positive results were generally viewed as more trustworthy and as having higher quality of evidence than negative results (both p<0.001).ConclusionsThe public’s default assessment of the face value of both the positive and negative test results (control group) indicate an awareness that test results are not perfectly accurate. Compared with other messaging tested, participants shown the UK’s 2020 wording about the interpretation of the test results appeared to interpret the results as more definitive than is warranted. Wording that acknowledges uncertainty can help people to have a more nuanced and realistic understanding of what a COVID-19 test result means, which supports decision making and behavioural response.Preregistration and data repositoryPreregistration of pilot at osf.io/8n62f, preregistration of main experiment at osf.io/7rcj4, data and code available online (osf.io/pvhba).


2015 ◽  
Vol 5 (02) ◽  
pp. 57
Author(s):  
Fatwa Aji Kurniawan ◽  
Sulhadi S ◽  
Agus Yulianto

<p>It has been done, the research which aims to develop a web-based teaching materials on the subjects of physics subject with subject mater of temperature and heat. This study using a modified model of the 4D development by eliminating the deployment phase. The validation of product development conducted by validator media experts and experts matter of physics, whereas small-scale trials conducted by physics teacher and 10 students. Validator review results stating that the quality of the product development were included in the category very well with the average percentage rating of 83.93%. The percentage value assigned by media expert by 75% in the good category and the percentage of the value provided by a matter expert 92.85% were in the very good category. Experiments by physics teacher to obtain result of equal to 94.44% were in the very good category and the average percentage of the test results by the students of 90.5% were in the very good category. The characteristics of the products developed include material composition using the curriculum in 2013, there was a recording facility and the results of evaluation of students' activities, there were feedback evaluation results were immediately known by the students and there were some links related to the material either youtube or other learning website.</p>


2018 ◽  
Vol 3 (3) ◽  
pp. 26-35
Author(s):  
Azmi Abu Seman ◽  
Nor Azlina Mahmud ◽  
Norfiza Ibrahim

Lecturer Evaluation System (e-CEvas) is used to measure lecturers’ strength and weaknesses every end of semester by the students. However, the current lecturer evaluation system had many problems such as slow performance, limited interactivity, loss of states and the data transmission had redundant code that was unnecessary in each page. To overcome those stated problem, AJAX technology is used to make the lecturer evaluation system much faster, easier to use, more reliable and increase the performance. This study applied AJAX technology in the development together with Visual Studio Ultimate 2012 as the editor, ASP.NET C# language for coding and SQL Server as the database. V-model framework approach was used in developing this research study which involves requirement analysis, system design, architectural design, module design, unit testing, integration testing, system testing and acceptance testing. Microsoft Visual Studio Web Performance and Load Testing software is used to measure the performance of AJAX technology and the result shows that differences of response time proved that AJAX is powerful web development technique for programming. User Acceptance Test was carried out to measure the satisfaction of users when using e-CEvas which the result shown that most respondents are agree to all instructions in the system and the organization of information on the screens is clear.


Author(s):  
Max A. Schumm ◽  
Dalena T. Nguyen ◽  
Jiyoon Kim ◽  
Chi-Hong Tseng ◽  
Amy Y. Chow ◽  
...  

Abstract Background Molecular testing can refine the risk of malignancy in cytologically indeterminate thyroid nodules and can reduce the need for diagnostic thyroidectomy. However, quality of life (QOL) in patients mananged with molecular testing is not well studied. Objective We aimed to assess the QOL of patients undergoing surveillance after a benign molecular test result, or thyroidectomy after a suspicious molecular test result. Methods This prospective longitudinal follow-up of the Effectiveness of Molecular Testing Techniques for Diagnosis of Indeterminate Thyroid Nodules randomized trial utilized the Thyroid-Related Patient-Reported Outcome, 39-item version (ThyPro-39) to assess the QOL of patients with indeterminate cytology on thyroid fine needle aspiration (FNA) biopsy. All patients underwent molecular testing at the time of initial FNA. A mixed-effect model was used to determine changes in QOL over time. Results Of 252 eligible patients, 174 completed the assessment (69% response rate). Molecular test results included 72% (n = 124) benign and 28% (n = 50) suspicious. ThyPro-39 scores of benign molecular test patients were unchanged from baseline (following initial FNA and molecular test results) to 18 months of ultrasound surveillance. Baseline symptoms of goiter, anxiety, and depression were more severe for patients with suspicious compared with benign molecular test results. At a median of 8 months after thyroidectomy, suspicious molecular test patients reported improved symptoms of goiter, anxiety, and depression. Conclusion A benign molecular test provides sustained QOL throughout ultrasound surveillance, without worsening anxiety or depression relating to the risk of malignancy. Definitive surgery results in improvement of QOL in patients with suspicious molecular tests.


1972 ◽  
Vol 15 (4) ◽  
pp. 852-860 ◽  
Author(s):  
Zoe Zehel ◽  
Ralph L. Shelton ◽  
William B. Arndt ◽  
Virginia Wright ◽  
Mary Elbert

Fourteen children who misarticulated some phones of the /s/ phoneme were tape recorded articulating several lists of items involving /s/. The lists included the Mc-Donald Deep Test for /s/, three lists similar to McDonald’s but altered in broad context, and an /s/ sound production task. Scores from lists were correlated, compared for differences in means, or both. Item sets determined by immediate context were also compared for differences between means. All lists were found to be significantly correlated. The comparison of means indicated that both broad and immediate context were related to test result. The estimated “omega square” statistic was used to evaluate the percentage of test score variance attributable to context.


Sign in / Sign up

Export Citation Format

Share Document