scholarly journals Nitric acid-anionic surfactant modified activated carbon to enhance cadmium(II) removal from wastewater: preparation conditions and physicochemical properties

2018 ◽  
Vol 78 (7) ◽  
pp. 1489-1498 ◽  
Author(s):  
Hao Sun ◽  
Xin He ◽  
Yongtian Wang ◽  
Fred S. Cannon ◽  
Hong Wen ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Nitric Acid ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Activated Carbons ◽  
Sodium Dodecyl ◽  
Nitric Acid Concentration ◽  
Sodium Dodecyl Benzene Sulfonate ◽  
Developed Surface ◽  
Area Functional

Abstract The authors used a nitric acid (HNO3)-sodium dodecyl benzene sulfonate (SDBS) method to modify a lignite-based activated carbon. These modified carbons were appraised for their removal of Cd(II) from aqueous solutions. Response surface methodology was employed to optimize the preparation factors including nitric acid concentration CN, temperature T and SDBS concentration CS. Statistical analysis indicated that the interaction of CN and CS incurred the most effect on the maximum cadmium adsorption capacity (Qm). The optimal Qm appeared at CN = 3.29 mol/L, T = 76 °C and CS=30,700 mg/L. The optimal protocol achieved 44.21 mg/g Qm for Cd(II) which was about 7 times larger than for this pristine lignite activated carbon (LAC) (6.78 mg/g). The physical-chemical properties of the modified activated carbons following each synthesis step were characterized relative to their surface area, oxygen functionality, and external surface charge. It was confirmed that the developed surface area, functional groups and negative charges were mainly responsible for the higher adsorption capacity for the LAC that have been more favorably tailored by this HNO3-SDBS protocol.

scholarly journals Pinecone-Derived Activated Carbons as an Effective Medium for Hydrogen Storage

Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2237
Author(s):  
Sara Stelitano ◽  
Giuseppe Conte ◽  
Alfonso Policicchio ◽  
Alfredo Aloise ◽  
Giovanni Desiderio ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Hydrogen Storage ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Hydrogen Adsorption ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Textural Properties ◽  
Biomass Waste ◽  
Wavelength Dispersive Spectrometry

Pinecones, a common biomass waste, has an interesting composition in terms of cellulose and lignine content that makes them excellent precursors in various activated carbon production processes. The synthesized, nanostructured, activated carbon materials show textural properties, a high specific surface area, and a large volume of micropores, which are all features that make them suitable for various applications ranging from the purification of water to energy storage. Amongst them, a very interesting application is hydrogen storage. For this purpose, activated carbon from pinecones were prepared using chemical activation with different KOH/precursor ratios, and their hydrogen adsorption capacity was evaluated at liquid nitrogen temperatures (77 K) at pressures of up to 80 bar using a Sievert’s type volumetric apparatus. Regarding the comprehensive characterization of the samples’ textural properties, the measurement of the surface area was carried out using the Brunauer–Emmett–Teller method, the chemical composition was investigated using wavelength-dispersive spectrometry, and the topography and long-range order was estimated using scanning electron microscopy and X-ray diffraction, respectively. The hydrogen adsorption properties of the activated carbon samples were measured and then fitted using the Langmuir/ Töth isotherm model to estimate the adsorption capacity at higher pressures. The results showed that chemical activation induced the formation of an optimal pore size distribution for hydrogen adsorption centered at about 0.5 nm and the proportion of micropore volume was higher than 50%, which resulted in an adsorption capacity of 5.5 wt% at 77 K and 80 bar; this was an increase of as much as 150% relative to the one predicted by the Chahine rule.

scholarly journals Physico-chemical characterization of powdered activated carbons obtained by thermo-chemical conversion of brown municipal waste

2011 ◽  
Vol 65 (3) ◽  
pp. 241-247
Author(s):  
Milan Momcilovic ◽  
Milovan Purenovic ◽  
Milena Miljkovic ◽  
Aleksandar Bojic ◽  
Aleksandra Zarubica ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Surface Area ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Pore Distribution ◽  
Municipal Waste ◽  
Horse Chestnut ◽  
Physico Chemical ◽  
Developed Surface ◽  
Oxygen Groups

Cones of the European Black pine and Horse chestnut kernel, regarded as brown municipal waste, was utilized in this work as a precursor for powdered activated carbons. Chemical activation was employed at 500?C in inert atmosphere of nitrogen. Standard physico-chemical analyses were performed to examine obtained products. FTIR method was employed to determine fuctional groups which were found to be typical for activated carbons. Acidic oxygen groups were quantitatively determined using Boehm titrations. It was established that carboxylic groups on pine cone activated carbon, and phenolic groups on chestnut kernel activated carbon were dominant from all acidic oxygen groups. Since both contact pH and pHPZC were determined to be fairly acidic, it could be concluded that obtained activated carbons belong to L-type. Shape and layout of micrometer dimensioned particles were observed by scanning electron microscopy. Particles of different shapes and dimensions along with small cracks and wide crevices and voids were noticed. Textural analysis was used to determine specific surface area and pore distribution of obtained activated carbons. Obtained products possess highly developed surface area and wide pore distribution.

Phenol adsorption by activated carbon produced from spent coffee grounds

2011 ◽  
Vol 64 (10) ◽  
pp. 2059-2065 ◽  
Author(s):  
Cínthia S. Castro ◽  
Anelise L. Abreu ◽  
Carmen L. T. Silva ◽  
Mário C. Guerreiro
Keyword(s):  
Activated Carbon ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Activated Carbons ◽  
High Surface ◽  
Morphological Properties ◽  
Phenol Removal ◽  
Spent Coffee Grounds ◽  
Phenol Adsorption ◽  
Coffee Grounds

The present work highlights the preparation of activated carbons (ACs) using spent coffee grounds, an agricultural residue, as carbon precursor and two different activating agents: water vapor (ACW) and K2CO3 (ACK). These ACs presented the microporous nature and high surface area (620–950 m2 g−1). The carbons, as well as a commercial activated carbon (CAC) used as reference, were evaluated as phenol adsorbent showing high adsorption capacity (≈150 mg g−1). The investigation of the pH solution in the phenol adsorption was also performed. The different activating agents led to AC with distinct morphological properties, surface area and chemical composition, although similar phenol adsorption capacity was verified for both prepared carbons. The production of activated carbons from spent coffee grounds resulted in promising adsorbents for phenol removal while giving a noble destination to the residue.

Influence of Surface Modification by Nitric Acid on Activated Carbon's Adsorption of Nickel Ions

2013 ◽  
Vol 743-744 ◽  
pp. 545-550 ◽  
Author(s):  
Juan Liu ◽  
Hui Ping Fan ◽  
Guo Zhuo Gong ◽  
Qiang Xie
Keyword(s):  
Activated Carbon ◽  
Nitric Acid ◽  
Sodium Hydroxide ◽  
Adsorption Capacity ◽  
Activated Carbons ◽  
Nickel Ion ◽  
Nickel Ions ◽  
Modified Activated Carbons ◽  
Sodium Hydroxide Treatment ◽  
Nickel Adsorption

Four kinds of commercial activated carbons were soaked in sodium hydroxide after modification with 10% nitric acid. Nickel adsorption isotherms for modified activated carbons before and after sodium hydroxide treatment were tested. The surface groups were characterized by the Fourier transform infrared spectroscopy and Boehm titration, the adsorption properties were determined by the iodine number and methylene blue number, the pHIEP were deduced by the Zeta potential analyzer. The results showed that nitric acid blocks the pore, while enhances the content of acid groups, especially carboxyl resulting in the decrease of nickel adsorption capacity. After sodium hydroxide treatment, the nickel capacity of activated carbon from anthracite, long flame coal, lignite and coconut increased by 21.5%, 116%, 78.9%, 89.1% comparing with the virgin activated carbon, respectively. The overall research indicated that nickel ion adsorption capacity of activated carbon can be improved only when the acid groups are transferred into anion, and the modification is more effective on the activated carbon prepared by low metamorphic grade coal.

Study of the Porous Structure and High Adsorption Capacity of Biomass-Based Activated Carbon Prepared from Aspen Wood by Ferric Nitrate III Activation

2021 ◽  
Vol 15 (2) ◽  
pp. 131-144
Author(s):  
Chunjiang Jin ◽  
Huimin Chen ◽  
Luyuan Wang ◽  
Xingxing Cheng ◽  
Donghai An ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Specific Surface ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Specific Surface Area ◽  
Pore Volume ◽  
Mass Ratio ◽  
Aspen Wood ◽  
Surface Functional Groups ◽  
Wood Sawdust

In this study, aspen wood sawdust was used as the raw material, and Fe(NO3)3 and CO2 were used as activators. Activated carbon powder (ACP) was produced by the one-step physicochemical activation method in an open vacuum tube furnace. The effects of different mass ratios of Fe(NO3)3 and aspen wood sawdust on the pore structure of ACP were examined under single-variable experimental conditions. The mass ratio was 0–0.4. The detailed characteristics of ACP were examined by nitrogen adsorption, scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy. The adsorption capacity of ACP was established by simulating volatile organic compounds (VOCs) using ethyl acetate. The results showed that ACP has a good nanostructure with a large pore volume, specific surface area, and surface functional groups. The pore volume and specific surface area of Fe-AC-0.3 were 0.26 cm3/g and 455.36 m2/g, respectively. The activator played an important role in the formation of the pore structure and morphology of ACP. When the mass ratio was 0–0.3, the porosity increased linearly, but when it was higher than 0.3, the porosity decreased. For example, the pore volume and specific surface area of Fe-AC-0.4 reached 0.24 cm3/g and 430.87 m2/g, respectively. ACP presented good VOC adsorption performance. The Fe-AC-0.3 sample, which contained the most micropore structures, presented the best adsorption capacity for ethyl acetate at 712.58 mg/g. Under the action of the specific reaction products nitrogen dioxide (NO2) and oxygen, the surface of modified ACP samples showed different rich C/O/N surface functional groups, including C-H, C=C, C=O, C-O-C, and C-N.

scholarly journals Optimisation of durian peel based activated carbon preparation conditions for dye removal

2013 ◽  
Vol 16 (1) ◽  
pp. 22-31
Author(s):  
Phung Thi Kim Le ◽  
Kien Anh Le
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Surface Area ◽  
Dye Removal ◽  
Activated Carbons ◽  
Low Cost ◽  
Waste Water Treatment ◽  
Impregnation Ratio ◽  
Carbon Production ◽  
Removal Capacity

Agricultural wastes are considered to be a very important feedstock for activated carbon production as they are renewable sources and low cost materials. This study present the optimize conditions for preparation of durian peel activated carbon (DPAC) for removal of methylene blue (MB) from synthetic effluents. The effects of carbonization temperature (from 673K to 923K) and impregnation ratio (from 0.2 to 1.0) with potassium hydroxide KOH on the yield, surface area and the dye adsorbed capacity of the activated carbons were investigated. The dye removal capacity was evaluated with methylene blue. In comparison with the commercial grade carbons, the activated carbons from durian peel showed considerably higher surface area especially in the suitable temperate and impregnation ratio of activated carbon production. Methylene blue removal capacity appeared to be comparable to commercial products; it shows the potential of durian peel as a biomass source to produce adsorbents for waste water treatment and other application. Optimize condition for preparation of DPAC determined by using response surface methodology was at temperature 760 K and IR 1.0 which resulted the yield (51%), surface area (786 m2/g), and MB removal (172 mg/g).

scholarly journals Preparation and characterization of activated carbons from albizia saman pod

2017 ◽  
Vol 36 (3) ◽  
pp. 44-53
Author(s):  
G. D. Akpen ◽  
M. I. Aho ◽  
N. Baba
Keyword(s):  
Activated Carbon ◽  
Surface Area ◽  
Activated Carbons ◽  
High Surface ◽  
High Surface Area ◽  
Volatile Matter ◽  
Sieve Analysis ◽  
Albizia Saman ◽  
Temperature Surface

Activated carbon was prepared from the pods of Albizia saman for the purpose of converting the waste to wealth. The pods were thoroughly washed with water to remove any dirt, air- dried and cut into sizes of 2-4 cm. The prepared pods were then carbonised in a muffle furnace at temperatures of 4000C, 5000C, 6000C ,7000C and 8000C for 30 minutes. The same procedure was repeated for 60, 90, 120 and 150 minutes respectively. Activation was done using impregnationratios of 1:12, 1:6, 1:4, 1:3, and 1:2 respectively of ZnCl2 to carbonised Albizia saman pods by weight. The activated carbon was then dried in an oven at 1050C before crushing for sieve analysis. The following properties of the produced Albizia saman pod activated carbon (ASPAC) were determined: bulk density, carbon yield, surface area and ash, volatile matter and moisture contents. The highest surface area of 1479.29 m2/g was obtained at the optimum impregnation ratio, carbonization time and temperature of 1:6, 60 minutes and 5000C respectively. It was recommended that activated carbon should be prepared from Albizia saman pod with high potential for adsorption of pollutants given the high surface area obtained.Keywords: Albizia saman pod, activated carbon, carbonization, temperature, surface area

Effect of Modification with Nitric Acid and Hydrogen Peroxide on Chromium (VI) Adsorption by Activated Carbon Fiber

2012 ◽  
Vol 518-523 ◽  
pp. 2099-2103
Author(s):  
Guang Zhou Qu ◽  
Hai Bing Ji ◽  
Ran Xiao ◽  
Dong Li Liang
Keyword(s):  
Hydrogen Peroxide ◽  
Activated Carbon ◽  
Nitric Acid ◽  
Carbon Fiber ◽  
Adsorption Capacity ◽  
Adsorption Kinetics ◽  
Ph Value ◽  
Activated Carbon Fiber ◽  
Order Kinetic ◽  
Adsorption Amount

The activated carbon fiber (ACF) was treated by different concentration nitric acid (HNO3) and hydrogen peroxide (H2O2) oxidization to enhance its adsorption capacity to hexavalent chromium (Cr6+) ion. The adsorption amount and adsorption kinetics of Cr6+ion on ACFs, and the surface chemical groups were investigated. The results showed that the modified ACFs with 1% HNO3and 10% H2O2had a better adsorption capacity, respectively. The adsorption amount of ACFs was affected strongly solution pH value, and decreased significantly with increasing of the pH value. The adsorption kinetics indicated that the adsorption rates of Cr6+ ion on different modified ACFs were well fitted with the pseudo-second-order kinetic model. After 1% HNO3and 10% H2O2modification, respectively, the total acidic oxygen-containing groups on ACFs surface had an increase obviously, which might be enhance the adsorption amount of Cr6+ion on ACFs.

scholarly journals STUDI ADSORPSI ZAT WARNA NAPHTHOL YELLOW S PADA LIMBAH CAIR MENGGUNAKAN KARBON AKTIF DARI AMPAS TEBU

Jurnal Kimia ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 104
Author(s):  
W. P. Utoo1 ◽  
E. Santoso ◽  
G. Yuhaneka ◽  
A. I. Triantini ◽  
M. R. Fatqi ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Contact Time ◽  
Adsorption Process ◽  
Activation Process ◽  
Adsorption Model ◽  
High Adsorption ◽  
Prolonged Contact ◽  
Test Result

The aim of this research is to get activated carbon from sugarcane bagasse with high adsorption capacity to Naphthol Yellow S and to know factors influencing the adsorption capacity. Activated carbon is prepared by incomplete combustion of sugracane bagasse. The resulting carbon is activated with H2SO4 with concentration variation of 0.5; 1.0; 1.5 and 2.0 M and is continued by calcination at 400 °C. The measurement of the surface area of ??activated carbon by the methylene blue method indicates that the activation process successfully extends the surface area of carbon from 31.87 m2/g before activation to 66-72 m2/g after activation. Activated carbon with concentration of 2.0 M H2SO4 showed the highest surface area of ??71.85 m2/g, however, the best adsorption was shown by activated carbon with a concentration of 0.5 M H2SO4 with the adsorption capacity of 83.93%. The adsorption test showed that the best amount of adsorbent was 0.2 g with contact time for 30 minutes. Prolonged contact time can decrease the amount of Naphthol Yellow S adsorbed. The best adsorption test result was shown by sample with activator concentration of 0,5 M, mass of 0,2 g and contact time of 30 min with adsorption capacity 95,81% or amount of dye adsorbed equal to 143,72 mg/g. The adsorption study also showed that the entire Naphthol Yellow S adsorption process followed the Langmuir isothemal adsorption model. Qualitative testing of real batik waste indicates that activated carbon can reduce the dyes waste containing Naphthol Yellow Sexhibited by the color of batik waste which is more faded.  

Adsorption of Soluble Metal Ions from Red Mud by Modified Activated Carbon

2008 ◽  
Vol 368-372 ◽  
pp. 1541-1544 ◽  
Author(s):  
Hua Lei Zhou ◽  
Dong Yan Li ◽  
Guo Zhuo Gong ◽  
Ya Jun Tian ◽  
Yun Fa Chen
Keyword(s):  
Activated Carbon ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Red Mud ◽  
Activated Carbons ◽  
Valuable Metal ◽  
Surface Areas ◽  
Alumina Industry ◽  
Modified Activated Carbons ◽  
Almost All

Activated carbon was employed as the adsorption carrier for the metal ions in HCl solution of red mud, a solid waste produced in alumina industry. To improve the adsorption capacity to valuable metal ions, the activated carbon was modified by chemicals including HNO3, H2O2, H2SO4, H3PO4, NH3, Na2CO3, and tri-butyl phosphate (TBP). It was found that the modifications contributed the high adsorption capacity to almost all metal ions we focused on. In the case of TBP, remarkably higher adsorption capacity and selectivity of Sc3+ was observed. The correlation between the surface areas, IR spectra of those chemically modified activated carbons and adsorption was schemed.

Sign in / Sign up

Export Citation Format

Share Document