scholarly journals Valorization of Building Retrofitting Waste as Alternative Materials in Gypsums

2017 ◽  
Vol 11 (1) ◽  
pp. 334-342
Author(s):  
Mercedes Del Río Merino ◽  
Jaime Santa Cruz Astorqui ◽  
Paola Villoria Sáez ◽  
Carmen Viñas Arrebola ◽  
Antonio Rodríguez Sánchez ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Environmental Impact ◽  
Building Materials ◽  
Raw Materials ◽  
Raw Material ◽  
New Materials ◽  
Demolition Waste ◽  
Alternative Materials ◽  
The University

Introduction:The lack of treatment of construction demolition waste (CDW) is a problem that must be solved immediately. It is estimated that the unused CDW generates an increase in the use of new materials close to 20% of the total materials consumed worldwide. Because of that, the use of CDW in building materials is an interesting alternative to guarantee their application. In the last years, many research works are being carried out in order to analyze the viability of using CDW as a substitute for the traditional raw materials that cause high environmental impact.However, much remains to be done, because these works generally characterize materials but not specific applications that allow the agents of construction to provide assurance required by the projects.Aim:The research group TEMA from the School of Building Construction (UPM) is working on this topic with the University of Seville, University of Burgos and the University of Zaragoza, developing a research project called "Waste to resources (W2R)". The main goal of the project is to develop new materials, elements and construction systems, manufactured with CDW generated in building retrofitting works, to be used in improving the energy efficiency of buildings.Results:In this article, some of the results of the W2R project are presented, namely the identification, quantification and characterization of the types of waste generated in renovation works to improve the energy efficiency of buildings and their possible applications as fillers in plasters to improve the performance of the original materials with a significant reduction in raw material, and thus reduce the environmental impact.Conclusions:Concrete and ceramics are the most commonly generated waste categories in building rehabilitation works to improve the energy efficiency of the buildings. These waste categories are generated during the preparation of the surface prior to the execution of the works. Also, mixed waste from insulation materials can be highlighted due to its volume.

scholarly journals Thermal Characterization of Recycled Materials for Building Insulation

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3564
Author(s):  
Arnas Majumder ◽  
Laura Canale ◽  
Costantino Carlo Mastino ◽  
Antonio Pacitto ◽  
Andrea Frattolillo ◽  
...  
Keyword(s):  
Environmental Impact ◽  
Environmental Sustainability ◽  
Building Materials ◽  
Raw Materials ◽  
Natural Fibers ◽  
Thermal Characterization ◽  
Recycled Materials ◽  
Building Insulation ◽  
Operational Phase

The building sector is known to have a significant environmental impact, considering that it is the largest contributor to global greenhouse gas emissions of around 36% and is also responsible for about 40% of global energy consumption. Of this, about 50% takes place during the building operational phase, while around 10–20% is consumed in materials manufacturing, transport and building construction, maintenance, and demolition. Increasing the necessity of reducing the environmental impact of buildings has led to enhancing not only the thermal performances of building materials, but also the environmental sustainability of their production chains and waste prevention. As a consequence, novel thermo-insulating building materials or products have been developed by using both locally produced natural and waste/recycled materials that are able to provide good thermal performances while also having a lower environmental impact. In this context, the aim of this work is to provide a detailed analysis for the thermal characterization of recycled materials for building insulation. To this end, the thermal behavior of different materials representing industrial residual or wastes collected or recycled using Sardinian zero-km locally available raw materials was investigated, namely: (1) plasters with recycled materials; (2) plasters with natural fibers; and (3) building insulation materials with natural fibers. Results indicate that the investigated materials were able to improve not only the energy performances but also the environmental comfort in both new and in existing buildings. In particular, plasters and mortars with recycled materials and with natural fibers showed, respectively, values of thermal conductivity (at 20 °C) lower than 0.475 and 0.272 W/(m⋅K), while that of building materials with natural fibers was always lower than 0.162 W/(m⋅K) with lower values for compounds with recycled materials (0.107 W/(m⋅K)). Further developments are underway to analyze the mechanical properties of these materials.

scholarly journals Crushed Bricks: Demolition Waste as a Sustainable Raw Material for Geopolymers

2021 ◽  
Vol 13 (14) ◽  
pp. 7572
Author(s):  
Gigliola D’Angelo ◽  
Marina Fumo ◽  
Mercedes del Rio Merino ◽  
Ilaria Capasso ◽  
Assunta Campanile ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Building Materials ◽  
Mechanical Performance ◽  
Raw Materials ◽  
Construction Material ◽  
Raw Material ◽  
The European Union ◽  
Total Energy Consumption ◽  
Demolition Waste ◽  
Crushed Brick

Demolition activity plays an important role in the total energy consumption of the construction industry in the European Union. The indiscriminate use of non-renewable raw materials, energy consumption, and unsustainable design has led to a redefinition of the criteria to ensure environmental protection. This article introduces an experimental plan that determines the viability of a new type of construction material, obtained from crushed brick waste, to be introduced into the construction market. The potential of crushed brick waste as a raw material in the production of building precast products, obtained by curing a geopolymeric blend at 60 °C for 3 days, has been exploited. Geopolymers represent an important alternative in reducing emissions and energy consumption, whilst, at the same time, achieving a considerable mechanical performance. The results obtained from this study show that the geopolymers produced from crushed brick were characterized by good properties in terms of open porosity, water absorption, mechanical strength, and surface resistance values when compared to building materials produced using traditional technologies.

scholarly journals Cuantificación de residuos en obras de rehabilitación energética de edificios = Quantification of waste in building energy rehabilitation works

2018 ◽  
Vol 4 (2) ◽  
pp. 48
Author(s):  
P. Villoria ◽  
M. Del Rio ◽  
J. Santa Cruz ◽  
A. Rodríguez ◽  
C. Porras
Keyword(s):  
Energy Efficiency ◽  
Surface Preparation ◽  
Building Energy ◽  
Vertical Surface ◽  
Construction And Demolition Waste ◽  
New Materials ◽  
Demolition Waste ◽  
In Situ Data

Resumen Este artículo presenta los resultados del proyecto de investigación "De residuos a recursos (W2R)" que analiza la generación de residuos de construcción y demolición (RCD) en obras de rehabilitación para la mejora de la eficiencia energética de edificios y desarrolla nuevos materiales, elementos y sistemas constructivos fabricados a partir de RCD. En este artículo se presentan algunos de los resultados del proyecto W2R, en concreto, la identificación, cuantificación y caracterización de las categorías de residuos generados en obras de rehabilitación para la mejora de la eficiencia energética llevadas a cabo en la envolvente vertical de los edificios. Para ello, se identificaron las actuaciones más comunes para mejorar la eficiencia energética de las envolventes verticales y se cuantificó la generación de RCD en dos obras utilizando métodos experimentales (datos in situ) y teóricos (software). Los resultados mostraron que la mayor cantidad de generación de RCD se produce durante las operaciones de preparación de la superficie vertical previas a desarrollar la actuación. Además, se encontró que las categorías de residuos más generados son: hormigón, cerámica, metal y madera. Abstract This article presents the results of the research project "From waste to resources (W2R)" that analyzes the generation of construction and demolition waste (RCD) in rehabilitation works for the improvement of the energy efficiency of buildings and develops new materials, elements and construction systems manufactured from RCD. This article presents some of the results of the W2R project, specifically, the identification, quantification and characterization of the categories of waste generated in rehabilitation works for the improvement of energy efficiency carried out in the vertical envelope of buildings. For this, the most common actions to improve the energy efficiency of the vertical envelopes were identified and the generation of CDR in two works was quantified using experimental methods (in situ data) and theoretical (software). The results showed that the greatest amount of RCD generation occurs during the vertical surface preparation operations prior to developing the performance. In addition, it was found that the most generated waste categories are: concrete, ceramics, metal and wood.

scholarly journals A Methodology Based on FT-IR Data Combined with Random Forest Model to Generate Spectralprints for the Characterization of High-Quality Vinegars

Foods ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1411
Author(s):  
José Luis P. Calle ◽  
Marta Ferreiro-González ◽  
Ana Ruiz-Rodríguez ◽  
Gerardo F. Barbero ◽  
José Á. Álvarez ◽  
...  
Keyword(s):  
Random Forest ◽  
Raw Materials ◽  
Principal Component ◽  
Hierarchical Cluster ◽  
Raw Material ◽  
Support Vector ◽  
Protected Designation Of Origin ◽  
Ft Ir

Sherry wine vinegar is a Spanish gourmet product under Protected Designation of Origin (PDO). Before a vinegar can be labeled as Sherry vinegar, the product must meet certain requirements as established by its PDO, which, in this case, means that it has been produced following the traditional solera and criadera ageing system. The quality of the vinegar is determined by many factors such as the raw material, the acetification process or the aging system. For this reason, mainly producers, but also consumers, would benefit from the employment of effective analytical tools that allow precisely determining the origin and quality of vinegar. In the present study, a total of 48 Sherry vinegar samples manufactured from three different starting wines (Palomino Fino, Moscatel, and Pedro Ximénez wine) were analyzed by Fourier-transform infrared (FT-IR) spectroscopy. The spectroscopic data were combined with unsupervised exploratory techniques such as hierarchical cluster analysis (HCA) and principal component analysis (PCA), as well as other nonparametric supervised techniques, namely, support vector machine (SVM) and random forest (RF), for the characterization of the samples. The HCA and PCA results present a clear grouping trend of the vinegar samples according to their raw materials. SVM in combination with leave-one-out cross-validation (LOOCV) successfully classified 100% of the samples, according to the type of wine used for their production. The RF method allowed selecting the most important variables to develop the characteristic fingerprint (“spectralprint”) of the vinegar samples according to their starting wine. Furthermore, the RF model reached 100% accuracy for both LOOCV and out-of-bag (OOB) sets.

scholarly journals The Influence of Cement Substitution by Biomass Fly Ash on the Polymer–Cement Composites Properties

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3079
Author(s):  
Beata Jaworska ◽  
Dominika Stańczak ◽  
Joanna Tarańska ◽  
Jerzy Jaworski
Keyword(s):  
Fly Ash ◽  
Building Materials ◽  
Raw Materials ◽  
Combustion Process ◽  
Biomass Combustion ◽  
Cement Composites ◽  
Cement Mortars ◽  
Mineral Additive ◽  
Biomass Fly Ash

The generation of energy for the needs of the population is currently a problem. In consideration of that, the biomass combustion process has started to be implemented as a new source of energy. The dynamic increase in the use of biomass for energy generation also resulted in the formation of waste in the form of fly ash. This paper presents an efficient way to manage this troublesome material in the polymer–cement composites (PCC), which have investigated to a lesser extent. The research outlined in this article consists of the characterization of biomass fly ash (BFA) as well as PCC containing this waste. The characteristics of PCC with BFA after 3, 7, 14, and 28 days of curing were analyzed. Our main findings are that biomass fly ash is suitable as a mineral additive in polymer–cement composites. The most interesting result is that the addition of biomass fly ash did not affect the rheological properties of the polymer–cement mortars, but it especially influenced its compressive strength. Most importantly, our findings can help prevent this byproduct from being placed in landfills, prevent the mining of new raw materials, and promote the manufacture of durable building materials.

Use of Sugarcane Bagasse Ashes as Raw Material in the Replacement of Fluxes for Applications on Porcelain Tile

2016 ◽  
Vol 881 ◽  
pp. 383-386 ◽  
Author(s):  
Raimundo J.S. Paranhos ◽  
Wilson Acchar ◽  
Vamberto Monteiro Silva
Keyword(s):  
Mechanical Properties ◽  
Environmental Impact ◽  
Physical Properties ◽  
Sugarcane Bagasse ◽  
Sintering Temperature ◽  
Raw Materials ◽  
Raw Material ◽  
The Cost ◽  
Potential Use ◽  
Porcelain Tile

This study evaluated the potential use of Sugarcane Bagasse Ashes (SBA) as a flux, replacing phyllite for the production of enamelled porcelain tile. The raw materials of the standard mass components and the SBA residue were characterized by testing by XRF, XRD, AG, DTA and TGA. Test samples were fabricated, assembled in lots of 3 units and sintered at temperatures of 1150 ° C to 1210 ° C. The results of the physical properties, mechanical properties and SEM of the sintered samples, showed that the formulation, G4 - in which applied 10% of SBA replacing phyllite, sintering temperature 1210 ° C showed better performance as the previously mentioned properties due to the formation of mullite crystals, meeting the prerequisites of standards for enamelled porcelain tile, while reducing the environmental impact and the cost of production.

scholarly journals Potential of the biodegradability and characteristics of bio-plastic from microalgae residues

Algologia ◽  
2021 ◽  
Vol 31 (1) ◽  
pp. 80-92
Author(s):  
Y.C. Wong ◽  
◽  
D.N. Roma ◽  
Keyword(s):  
Human Life ◽  
Raw Material ◽  
Infrared Analysis ◽  
Drying Process ◽  
Good Resistance ◽  
Chlorella Sp ◽  
Plastic Bags ◽  
Different Types ◽  
The University

Petroleum-based plastic has been widely used in many industries. However, it takes hundreds of years to degrade and causes widespread pollution to our environment. These problems led to the invention of bioplastics, which were comprised of natural biopolymers made from starch. The production of bioplastics from food-based starches such as tapioca and corn created competition between food and bioplastic production industries. Hence, this research study focuses on producing bioplastic from microalgae residue, which is a non-food based raw material that uses four different types of plasticizers: glycerol, sorbitol, glutaraldehyde and polyethylene glycol (PEG). Microalgae species for identification were obtained from the fish pond at the University Malaysia of Kelantan, before cultivating the species for 14 days. The microalgae residues were extracted through the centrifugation process. Three species were identified under the light microscope, Chlorella sp., Scenedesmus sp. and Monoraphidium sp. The production of bioplastic involved a manual stirring method using a hotplate magnetic stirrer, followed by drying the bioplastic in an oven at 60 oC. Results obtained showed that sorbitol and glycerol from microalgae are suitable to be used as a plasticizer for the production of bioplastic, however glutaraldehyde and PEG are not suitable. Bioplastics that used PEG and glutaraldehyde became cracked and brittle after the drying process. The characterization of bioplastics includes universal tensile testing machines, Fourier-transform infrared analysis and biodegradability tests being processed//undertaken on glycerol-based and sorbitol based bioplastic. Characterization of bioplastics proved that both glycerol and sorbitol have high potential for applications in daily human life. Bioplastics which used sorbitol as a plasticizer could be used in can be applied the production of plastic goods such as toys and household items due to its good resistance toward stress and minimal flexibility. Meanwhile bioplastics which used glycerol as a plasticizer could be applied to the production of plastic bags and plastic food wrap due to its elastic and flexible nature.

scholarly journals High strength glass-ceramics sintered with coal gangue аs а raw material

2019 ◽  
Vol 51 (3) ◽  
pp. 285-294
Author(s):  
Dang Wei ◽  
H.-Y. He
Keyword(s):  
Building Materials ◽  
Raw Materials ◽  
Glass Ceramics ◽  
High Strength ◽  
Coal Gangue ◽  
Raw Material ◽  
Sintering Process ◽  
Forming Process ◽  
Sintered Glass ◽  
Utilization Ratio

High strength lightweight glass-ceramics were fabricated with coal gangue and clay as main raw materials. The utilization ratio of coal gangue, the ratio of the coal gangue with clay, mineralization agents, forming process and sintering process on the properties of the fabricated glass-ceramics were optimized. The utilization ratio of coal gangue reached 75, and the ratio of coal gangue to clay was 3/1, as an optimal property was observed. The optimal sintering temperature was found to be 1370?C. At this optimal temperature, the sintered glass-ceramics showed the main phase of mullite and spindle and so showed high strength, low density, and low water absorbance. The appropriate amounts of codoping of the TiO2, ZnO, and MnO2/dolomite as mineralization agents obviously enhanced the properties of the glass-ceramics. Process optimizations further determined reasonable and optimal process parameters. The high strength lightweight glass-ceramics fabricated in this work may be very suitable for various applications including building materials, cooking ceramics, and proppant materials, et al.

Sign in / Sign up

Export Citation Format

Share Document