scholarly journals Design and Analysis of Motor Cycle Helmet for Improved Safety

2021 ◽  
Vol 9 (VII) ◽  
pp. 75-85
Author(s):  
Abhinav Biju
Keyword(s):  
Additive Manufacturing ◽  
Impact Test ◽  
Poor Quality ◽  
Road Accidents ◽  
Test Analysis ◽  
Innovative Design ◽  
Complex Design ◽  
Improved Design ◽  
Manufacturing Technologies ◽  
Two Wheeler

Road accidents are one of the most common and unavoidable problems in our society which costs our precious lives. Helmets of poor quality only give the lack of security, so helmets with more improvised design become the priority for two-wheelers. Our paper aims to design and prototype safety helmets for motorcycles with innovative design, which facilitates the user to wear it more comfortably. In addition to that, we analyze the improved design and optimize it. As safety is the primary criterion for the customers, we aim to produce the helmets by additive manufacturing with a customized design enabling ventilation, lightweight and increased stiffness. Additive manufacturing helps to fabricate complex designs with a combination of different materials. We will incorporate a mechanism that does not allow the two-wheeler to unlock unless the rider has a helmet. The outer casing would be durable and protect the user against impact. We have also planned to integrate the technology, which gives SOS signals to the nearby hospitals when the vehicle undergoes an accident. This is done by incorporating accelerometers in the helmet, so once the value reaches a certain limit, the emergency message is sent. By conventional manufacturing technologies, making customized helmet is very difficult. But, on the other hand, additive manufacturing facilitates fabricating complex design, which can have integrated sensors for safety purposes. Impact test analysis and airflow analysis will be performed on the helmet to validate the design. Therefore, in this paper, we are going to design and analyze the helmet with improved safety. Keywords: Helmet, motorcycle, optimization, safety, Fusion 360, Ansys, Arduino, 3D printing.

scholarly journals Design Right Once for Additive Manufacturing

2018 ◽  
Vol 188 ◽  
pp. 03020
Author(s):  
Antonios Tsakiris ◽  
Christos Salpistis ◽  
Athanassios Mihailidis
Keyword(s):  
Additive Manufacturing ◽  
Weight Reduction ◽  
Variable Density ◽  
Free Form ◽  
Structure Generation ◽  
Innovative Design ◽  
Key Factor ◽  
Traditional Manufacturing ◽  
Manufacturing Technologies ◽  
Free Form Surfaces

Additive Manufacturing (AM) has been widely considered a key factor for innovative design. However, the utilization of AM has not been as high as expected, although the technology offers key innovative design capabilities, weight reduction, parts count and assembly consolidation as well as material saving. This low utilization is attributed to the lack of AM understanding, mature CAE/CAM software tools addressing AM specific issues such as design support structure generation and removal, residual stresses, surface quality. In most cases, Design for AM (DfAM) is a crucial requisite for a “Design Right Once” approach. Such an approach is shown in the current study using three parts as example: an arthropod’s leg, a gearshift drum and an electric motor mounting frame. The implementation of geometrical conformal lattice structures and lattices with variable density are discussed. A structured design approach is presented and design dilemmas are solved in terms of a DfAM approach. Primary design optimizations are evaluated. Weight reduction is considered throughout the design and free form surfaces are being used. “Freedom to Design” principle is also portrayed and assembly parts consolidation occurs as a natural process of DfAM in comparison with previous design practices. It is concluded that, even from the primary design phase the design engineer can reveal his creativity because of the absence of constraints set by the traditional manufacturing technologies.

scholarly journals Axiomatic Design of Test Artifact for Laser Powder Bed Fusion Machine Capability Assessment

2019 ◽  
Vol 301 ◽  
pp. 00006 ◽  
Author(s):  
Alessandro Giorgetti ◽  
Filippo Ceccanti ◽  
Paolo Citti ◽  
Andrea Ciappi ◽  
Gabriele Arcidiacono
Keyword(s):  
Additive Manufacturing ◽  
Axiomatic Design ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Complex Product ◽  
Machine Performance ◽  
Performance Check ◽  
Improved Design ◽  
Manufacturing Technologies

Additive Manufacturing is increasingly growing in importance in the manufacturing environment, allowing to realize very complex product designs. Identifying the real machine capability is becoming fundamental as additive manufacturing technologies are starting to substitute conventional manufacturing processes. This aspect holds particularly true in the case of Laser Powder Bed Fusion technology. In this case, the method to investigate and determine the actual machine capabilities still represents an open point. In this paper, we propose an analysis of a well-known test artifact from an Axiomatic Design standpoint; based on the results and the review of the Customer Needs, we develop an improved design which is able to ensure a robust analysis for a reliable machine performance check.

scholarly journals A STRUCTURED APPROACH TO REDUCE DESIGN ITERATIONS IN ADDITIVE MANUFACTURING

2021 ◽  
Vol 1 ◽  
pp. 231-240
Author(s):  
Laura Wirths ◽  
Matthias Bleckmann ◽  
Kristin Paetzold
Keyword(s):  
Additive Manufacturing ◽  
Spare Parts ◽  
Design Guidelines ◽  
Final Part ◽  
Layer By Layer ◽  
Powder Bed ◽  
Batch Sizes ◽  
Manufacturing Technologies ◽  
Structured Approach ◽  
Design Freedom

AbstractAdditive Manufacturing technologies are based on a layer-by-layer build-up. This offers the possibility to design complex geometries or to integrate functionalities in the part. Nevertheless, limitations given by the manufacturing process apply to the geometric design freedom. These limitations are often unknown due to a lack of knowledge of the cause-effect relationships of the process. Currently, this leads to many iterations until the final part fulfils its functionality. Particularly for small batch sizes, producing the part at the first attempt is very important. In this study, a structured approach to reduce the design iterations is presented. Therefore, the cause-effect relationships are systematically established and analysed in detail. Based on this knowledge, design guidelines can be derived. These guidelines consider process limitations and help to reduce the iterations for the final part production. In order to illustrate the approach, the spare parts production via laser powder bed fusion is used as an example.

scholarly journals Adhesion Studies during Generative Hybridization of Textile-Reinforced Thermoplastic Composites via Additive Manufacturing

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3888
Author(s):  
Johanna Maier ◽  
Christian Vogel ◽  
Tobias Lebelt ◽  
Vinzenz Geske ◽  
Thomas Behnisch ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Polyamide 6 ◽  
Thermoplastic Composites ◽  
Efficient Production ◽  
Angle Measurements ◽  
Small Series ◽  
Contact Angle Measurements ◽  
Static Tensile ◽  
Pre Treatment ◽  
Manufacturing Technologies

Generative hybridization enables the efficient production of lightweight structures by combining classic manufacturing processes with additive manufacturing technologies. This type of functionalization process allows components with high geometric complexity and high mechanical properties to be produced efficiently in small series without the need for additional molds. In this study, hybrid specimens were generated by additively depositing PA6 (polyamide 6) via fused layer modeling (FLM) onto continuous woven fiber GF/PA6 (glass fiber/polyamide 6) flat preforms. Specifically, the effects of surface pre-treatment and process-induced surface interactions were investigated using optical microscopy for contact angle measurements as well as laser profilometry and thermal analytics. The bonding characteristic at the interface was evaluated via quasi-static tensile pull-off tests. Results indicate that both the bond strength and corresponding failure type vary with pre-treatment settings and process parameters during generative hybridization. It is shown that both the base substrate temperature and the FLM nozzle distance have a significant influence on the adhesive tensile strength. In particular, it can be seen that surface activation by plasma can significantly improve the specific adhesion in generative hybridization.

scholarly journals MODEL-BASED DESIGN OF AM COMPONENTS TO ENABLE DECENTRALIZED DIGITAL MANUFACTURING SYSTEMS

2021 ◽  
Vol 1 ◽  
pp. 2127-2136
Author(s):  
Olivia Borgue ◽  
John Stavridis ◽  
Tomas Vannucci ◽  
Panagiotis Stavropoulos ◽  
Harry Bikas ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Manufacturing Systems ◽  
Production Systems ◽  
Data Generation ◽  
Production Networks ◽  
Model Based ◽  
Manufacturing Technologies ◽  
Am Processes ◽  
Final Consumer

AbstractAdditive manufacturing (AM) is a versatile technology that could add flexibility in manufacturing processes, whether implemented alone or along other technologies. This technology enables on-demand production and decentralized production networks, as production facilities can be located around the world to manufacture products closer to the final consumer (decentralized manufacturing). However, the wide adoption of additive manufacturing technologies is hindered by the lack of experience on its implementation, the lack of repeatability among different manufacturers and a lack of integrated production systems. The later, hinders the traceability and quality assurance of printed components and limits the understanding and data generation of the AM processes and parameters. In this article, a design strategy is proposed to integrate the different phases of the development process into a model-based design platform for decentralized manufacturing. This platform is aimed at facilitating data traceability and product repeatability among different AM machines. The strategy is illustrated with a case study where a car steering knuckle is manufactured in three different facilities in Sweden and Italy.

scholarly journals Influence of Deposition Patterns on Distortion of H13 Steel by Wire-Arc Additive Manufacturing

Metals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 485
Author(s):  
Xufeng Li ◽  
Jian Lin ◽  
Zhidong Xia ◽  
Yongqiang Zhang ◽  
Hanguang Fu
Keyword(s):  
Additive Manufacturing ◽  
Temperature History ◽  
H13 Steel ◽  
Deposition Patterns ◽  
Field Distortion ◽  
Set Up ◽  
Manufacturing Technologies ◽  
Inherent Strain ◽  
Inherent Strain Method ◽  
Wire Arc Additive Manufacturing

Wire-arc additive manufacturing (WAAM) has been considered as one of the potential additive-manufacturing technologies to fabricate large components. However, its industrial application is still limited by the existence of stress and distortion. During the process of WAAM, the scanning pattern has an important influence on the temperature field, distortion and final quality of the part. Four kinds of deposition patterns, including sequence, symmetry, in–out and out–in, were designed to deposit H13 steel in this study. An in situ measurement system was set up to record the temperature history and the progress of accumulated distortion of the parts during deposition. An S value was proposed to evaluate the distortion of the substrate. It was shown that the distortion of the part deposited by sequence was significantly larger than those of other parts. The distortion deposited by the out–in pattern decreased by 68.6% compared with sequence. The inherent strain method and strain parameter were introduced to expose the mechanism of distortion reduction caused by pattern variation.

scholarly journals 3D Printed Masks for Powders and Viruses Safety Protection Using Food Grade Polymers: Empirical Tests

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 617
Author(s):  
Ruben Foresti ◽  
Benedetta Ghezzi ◽  
Matteo Vettori ◽  
Lorenzo Bergonzi ◽  
Silvia Attolino ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Additive Manufacturing ◽  
Material Selection ◽  
Mechanical Resistance ◽  
Biological Safety ◽  
Fused Deposition ◽  
Industrial Grade ◽  
Safety Protection ◽  
3D Printed ◽  
Manufacturing Technologies

The production of 3D printed safety protection devices (SPD) requires particular attention to the material selection and to the evaluation of mechanical resistance, biological safety and surface roughness related to the accumulation of bacteria and viruses. We explored the possibility to adopt additive manufacturing technologies for the production of respirator masks, responding to the sudden demand of SPDs caused by the emergency scenario of the pandemic spread of SARS-COV-2. In this study, we developed different prototypes of masks, exclusively applying basic additive manufacturing technologies like fused deposition modeling (FDM) and droplet-based precision extrusion deposition (db-PED) to common food packaging materials. We analyzed the resulting mechanical characteristics, biological safety (cell adhesion and viability), surface roughness and resistance to dissolution, before and after the cleaning and disinfection phases. We showed that masks 3D printed with home-grade printing equipment have similar performances compared to the industrial-grade ones, and furthermore we obtained a perfect face fit by customizing their shape. Finally, we developed novel approaches to the additive manufacturing post-processing phases essential to assure human safety in the production of 3D printed custom medical devices.

scholarly journals Wire Arc Additive Manufacturing: Review on Recent Findings and Challenges in Industrial Applications and Materials Characterization

Metals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 939
Author(s):  
Mukti Chaturvedi ◽  
Elena Scutelnicu ◽  
Carmen Catalina Rusu ◽  
Luigi Renato Mistodie ◽  
Danut Mihailescu ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Structural Integrity ◽  
Industrial Applications ◽  
Raw Material ◽  
Continuous Increase ◽  
Control Optimization ◽  
Modern Manufacturing ◽  
Directed Energy ◽  
Manufacturing Technologies ◽  
Wire Arc Additive Manufacturing

Wire arc additive manufacturing (WAAM) is a fusion manufacturing process in which the heat energy of an electric arc is employed for melting the electrodes and depositing material layers for wall formation or for simultaneously cladding two materials in order to form a composite structure. This directed energy deposition-arc (DED-arc) method is advantageous and efficient as it produces large parts with structural integrity due to the high deposition rates, reduced wastage of raw material, and low consumption of energy in comparison with the conventional joining processes and other additive manufacturing technologies. These features have resulted in a constant and continuous increase in interest in this modern manufacturing technique which demands further studies to promote new industrial applications. The high demand for WAAM in aerospace, automobile, nuclear, moulds, and dies industries demonstrates compatibility and reflects comprehensiveness. This paper presents a comprehensive review on the evolution, development, and state of the art of WAAM for non-ferrous materials. Key research observations and inferences from the literature reports regarding the WAAM applications, methods employed, process parameter control, optimization and process limitations, as well as mechanical and metallurgical behavior of materials have been analyzed and synthetically discussed in this paper. Information concerning constraints and enhancements of the wire arc additive manufacturing processes to be considered in terms of wider industrial applicability is also presented in the last part of this paper.

Sign in / Sign up

Export Citation Format

Share Document