scholarly journals The content of heavy metals in the raw materials of some representatives of the genus Paeonia L. in an urbanized environment

2021 ◽  
Vol 16 (4) ◽  
pp. 337-352
Author(s):  
Antonina A. Reut ◽  
Svetlana G. Denisova

At present, heavy metals are generally recognized as priority soil pollutants, while the most active pollutants are their mobile forms, which can pass from solid phases into soil solutions and be absorbed by plants. It is known that the vegetative mass of agricultural crops is capable of accumulating large amounts of heavy metals. Ornamental flower crops, which firmly occupy their ecological niche, are practically not considered from this point of view. The aim of this work was to study the features of the accumulation of heavy metals in the aboveground and underground organs of some representatives of the genus Paeonia L. in the urbanized environment of the city of Ufa. The objects of research were four species ( P. peregrina Mill., P. lactiflora Pall., P. lactiflora f. rosea, P. delavayi Franch.) (Family Paeoniaceae Rudolphi) and three varieties of hybrid peony (Appassionata, Mustai Karim, Jeanne dArc). The study of the elemental composition of the aboveground and underground parts was carried out according to the method Determination of As, Pb, Cd, Sn, Cr, Cu, Fe, Mn and Ni in samples of food products and food raw materials by the atomic absorption method with electrothermal atomization. Mathematical data processing was carried out using generally accepted methods of variation statistics using the AgCStat software package in the form of an Excel add-in. Eight element studies are presented for each raw material group. Quantitative indicators of elements are given in mmol/kg of air-dry raw materials. It was revealed that in the studied samples the copper content was 4.152520.00 times higher than that of other elements. The minimum concentrations of arsenic (0.00350.0064 mmol/kg), chromium (0.00190.0046 mmol/ kg), manganese (0.01740.0219 mmol/ kg) and iron (0.00590.0125 mmol/ kg) were noted in the roots; lead (0.0030.037 mmol/kg), cadmium (0.00020.001 mmol/kg) and copper (0.14770.2134 mmol/kg) - in the leaves; nickel (0.00820.0179 mmol/kg) - in the flowers of the studied paeonies. The maximum content of arsenic (0.00620.0123 mmol/kg) and chromium (0.00280.0063 mmol/kg) was found in the leaves; lead (0.00270.0223 mmol/kg), nickel (0.01670.0209 mmol/kg), manganese (0.01730.0212 mmol/kg) and iron (0.00870.0138 mmol/kg) - in stems; cadmium (0.00020.0009 mmol/kg) and copper (0.1440.244 mmol/kg) - in flowers. Therefore, cutting paeonies in the autumn before retirement avoids the accumulation of these microelements in the soil. The results of the correlation analysis showed that the absolute values of the concentrations of the studied elements in the considered taxon of paeonies correlate with each other to a moderate and strong degree.

2021 ◽  
Vol 214 (11) ◽  
pp. 45-55
Author(s):  
Antonina Reut ◽  
Svetlana Denisova

Abstract. Currently, heavy metals are considered as priority soil pollutants. It is known that the vegetative mass of agricultural crops is capable of accumulating them in large quantities. Ornamental flower crops, which firmly occupy their ecological niche, are practically not considered from this point of view. The aim of this work is to study the features of the accumulation of heavy metals in the aboveground and underground organs of some representatives of the genus Paeonia L. in the urbanized environment of the city of Ufa. The objects of research were seven taxa of Paeonia (P. peregrina Mill., P. lactiflora Pall., P. lactiflora f. rosea, P. delavayi Franch., P. × hybrida Appassionata, Mustai Karim, Jeanne d’Arc). Methodology. The study of the elemental composition of the aboveground and underground parts was carried out according to the method No. M-02-1009-05 atomic spectroscopy. Mathematical data processing was carried out using generally accepted methods of variation statistics using the AgCStat software package in the form of an Excel add-in. Scientific novelty. For the first time, different taxa and parts of Paeonia plants were taken for research. Results. It was revealed that in the studied samples the copper content is 4,15–2520,00 times higher than that of other elements. It is noted that the minimum concentrations of arsenic, cadmium, chromium, manganese and iron are noted in the roots; lead and nickel – in flowers; copper – in the leaves of the studied paeonies. The maximum content of arsenic, lead, chromium is found in the leaves; cadmium, nickel, manganese – in the stems; iron – in flowers. That is, cutting paeonies in the autumn before retirement avoids the accumulation of these microelements in the soil. The results of the correlation analysis showed that the absolute values of the concentrations of the studied elements in the considered taxa of paeonies correlate with each other to a weak and medium degree. Correlation study of pairs of elements makes it possible to assess the synergism of accumulation and its absence, which is consistent with the opinion of other authors.


2021 ◽  
Author(s):  
B.E. Gubasheva ◽  
M.A. Khassenova ◽  
E.K. Akkereyeva

The growth of production zones in the city of Aksai in the West Kazakhstan region leads to contamination of the soil cover, which, in turn, causes a chain reaction of pollution. Due to soil contamination, soil moisture and the underground surface are polluted. As a result, the processes in the soil change, the vital activity of plants, animals and microorganisms are disrupted. The article presents data on the study of changes in soil cover under the influence of human activity. The results of the conducted studies on the determination of the humus content and pH level, the content of heavy metals in technogenically disturbed soils in the adjacent territory of the natural gas processing enterprise are presented. The obtained data on the gross content and mobile forms of heavy metals indicates that the maximum permissible concentration level for these pollutants is not exceeded.


2021 ◽  
Vol 265 ◽  
pp. 02019
Author(s):  
Antonina Reut ◽  
Aigul Biglova ◽  
Irina Allayarova

The purpose of the work is to establish the characteristics of the accumulation of heavy metals of aboveground and underground organs in plant samples of 8 varieties of Narcissus hybridus and Camassia cusickii in the urbanized environment of the city of Ufa. The study of the elemental composition of the samples was carried out according to the method of quantitative chemical analysis ‘Determination of As, Pb, Cd, Sn, Cr, Cu, Fe, Mn and Ni in laboratory samples of food products and food raw materials by the atomic absorption method with electrothermal atomization’. It was found that the content of nickel, copper, cadmium, lead, magnesium, iron, chromium in all the samples studied does not exceed the standards specified in the State Pharmacopoeia of the Russian Federation (SP RF). The arsenic content exceeds the standards specified in the SP RF by 3.4 times. Revealed a high intensity of biological absorption of copper. It has been established that the concentrations of As, Cu, Pl, Mn, Fe in the aboveground organs are higher than in the underground part of plants; the ratio of the content of Ni, Cr, Cd in aboveground and underground organs is the same.


2008 ◽  
Vol 59 (2) ◽  
pp. 129-134
Author(s):  
Ion Teoreanu ◽  
Roxana Lucia Dumitrache ◽  
Stefania Stoleriu

Any change of the raw material sources for glazes, economically, ecologically motivated, and also from the glaze quality point of view, is conditioned by the molecular formula rationalization and by the variation limits of the molecular formula, respectively. The proper glaze compositions are placed within their limit variation intervals with optimized processing and utilization properties. For this purpose, the rationalization criteria and procedures of molecular formulas are summarized in the present paper, as well as the results referring to their rationalization obtained in the authors� previous work. Thus, one starts from a base of raw materials that are selected, usable and also accessible for the design and producing of the glazes. On these bases the groundwork and the design equation for the glaze recipes are developed, exemplified for a single glaze. For an easy access to results, computer programs are used for an easy access to results.


1994 ◽  
Vol 77 (6) ◽  
pp. 1447-1453 ◽  
Author(s):  
Pauline M Lacrok ◽  
Norman M Curran ◽  
Wing-Wah Sy ◽  
Dennis K J Goreck ◽  
Pierre Thibault ◽  
...  

Abstract A liquid chromatographic method for the determination of amiodarone hydrochloride and 10 related compounds in drug raw material and for assay of drug in tablets was developed. The method specifies a 3 jxm Hypersil nitrile column (150 × 4.6 mm), a mobile phase of 1 + 1 acetonitrile–ammonium acetate buffer (0.1 M adjusted to pH 6.0 with 0.1 M acetic acid), a flow rate of 1 mL/min, and detection at 240 nm. The lower limit of quantitation of the related compounds is 0.02% or less. Drug contents in 2 raw material samples were 100.1 and 99.9% and ranged from 98.2 to 99.4% in 3 tablet formulations. Impurity levels in 2 samples of raw material from different manufacturers were ca 0.4%. The presence of 3 of the known related compounds in these samples was confirmed by liquid chromatographymass spectrometry. The method applied to raw materials was evaluated by a second laboratory and found to be satisfactory.


Author(s):  
Grażyna Kowalska

The presented study was aimed at the determination of the level of contamination with heavy metals (Cd, Pb, As, and Hg) in 240 samples of plant materials, i.e., herbal raw materials, spices, tea, and coffee. Moreover, a probabilistic risk assessment (noncarcinogenic and carcinogenic risks) was estimated by models including target hazard quotient (THQ) and cancer risk (CR). The samples were subjected to microwave mineralisation with the use of HNO3 (65%), while the determination of the content of the elements was performed with the use of inductively coupled plasma mass spectrometer (ICP–MS) and a mercury analyser. The element which was characterised by the highest level of accumulation in the analysed samples was lead (from 0.010 to 5.680 mg/kg). Among the heavy metals under analysis, the lowest concentration was noted in the case of mercury (from 0.005 to 0.030 mg/kg). A notably higher level of contamination with heavy metals was noted in the analysed samples of herbs and spices (0.005–5.680 mg/kg), compared to samples of tea and coffee (0.005–0.791 mg/kg). According to the guidelines of the World Health Organisation (WHO) concerning the limits of contamination of samples of herbal raw materials with heavy metals, lead levels exceeding the limits were only noted in 24 samples of herbs (18%). In all of the analysed samples of spices, tea, and coffee, no instances of exceeded limits were noted for any of the analysed heavy metals. The values of TTHQmax (in relation to the consumption of the analysed products) were as follows: up to 4.23 × 10−2 for spices, up to 2.51 × 10−1 for herbs, up to 4.03 × 10−2 for China tea, and up to 1.25 × 10−1 for roasted coffee beans. As the value of THQ ≤1, there is no probability of the appearance of undesirable effects related to the consumption of the analysed group of raw materials and products of plant origin. The CR value for As (max. value) was 1.29 × 10−5, which is lower than the maximum acceptable level of 1 × 10−4 suggested by United States Environmental Protection Agency (USEPA).


2019 ◽  
Vol 9 (2) ◽  
pp. 12-20
Author(s):  
Julio Warmansyah ◽  
Dida Hilpiah

 PT. Cahaya Boxindo Prasetya is a company engaged in the manufacture of carton boxes or boxes. The company's activities also include cutting and printing services using machinery and human power. The problem faced in this company is the difficulty of predicting the amount of inventory of raw materials that will be  included in the production. The remaining raw materials for production will be used as the final stock to get the minimum, the goal is to reduce excess stock Overcoming this problem, fuzzy logic is used to predict raw material inventories by focusing on the final stock. In this study using Fuzzy Sugeno, with three input variables, namely: initial inventory, purchase, production, while the output is the final stock. Determination of prediction results using defuzzification using the average concept of MAPE (Mean Absolute Percentage Error). The results obtained, using the Fuzzy Sugeno method can predict the inventory of raw materials with a MAPE value of 38%. 


2017 ◽  
Vol 12 (2) ◽  
Author(s):  
Monika Handayani ◽  
Eka Kusuma Dewi

<p>CV. Baja Utama Landasan Ulin is a business entity that manufactures various products using the basic ingredients of iron. In the management of raw materials for the production of common regulatory process raw materials into sections for further processing. This setting is often done manually without doing careful planning, so that at the end of each production process there are many remaining pieces of the raw materials that should be used in production. In addition to the determination of the production is necessary to reference how the product should be made for each type of existing products. This is often an important factor that pushed for the optimization of production planning in determining the number of products for each type of product and raw material consumption.Linear Programming is one of the methods used in production planning to regulate the use of raw materials is limited. Simplex method is part of the linear programming method that can be used in the production planning system implementation. Simplex method identifies an initial basic solution and then move systematically to other basic solution that has the potential to improve the value of the objective function.The calculation result of production planning using the simplex method can be used as a reference in the decision making production planning. By building an application using the simplex method can assist in the calculation of production peencanaan more efficiently and effectively. Accuracy testing system constructed show significant results with great value reached 94% level of accuracy.<br />Keywords: simplex, production planning, the maximum gain, linear programming</p>


2021 ◽  
Vol 26 (1) ◽  
pp. 57-62
Author(s):  
Hilda Novianty ◽  
Emienour Muzalina Mustafa ◽  
Suratno Suratno

The use of brown-macroalgae (Phaeophyceae) as an alginate source is very broad, covering the food and non-food industry, because of that it is necessary to know the safety of these natural resources, one of which is safe from heavy metal contamination. The purpose of this study was to determine heavy metals concentrations accumulated in several types of Phaeophyceae (brown macroalgae) as an alginate source from Malang Rapat waters, Bintan. The method used was descriptive non-experimental. The determination of the location of sampling was done by purposive sampling method. Samples were taken through free collection, identified species and measured of metal contamination concentrations for As, Cd, and Pb. The data obtained were analyzed descriptively. The results showed that Phaeophyceae found in Malang Rapat waters were Turbinaria conoides, Sargassum aquifolium, Padina australis, Hormophysa cuneiformis with each metal concentration contamination of As 13.95 to 23.30 µg.g-1 dry weight; Cd from 0.33 to 1.08 µg.g-1 dry weight and Pb from 4.72 to 9.92 µg.g-1 dry weight. This study showed that all metal contamination ranges in all Phaeophyceae were on the verge of the maximum limit set by the National Standardization Agency of Indonesia Indonesian (SNI) No 7387 of 2009 and National Agency of Drug and Food Control of RI (BPOM) Regulation No 5 of 2018 for dried macroalgae product so that Phaeophyceae from Malang Rapat waters - Bintan was not safe to be used as raw material for alginate source or other processed products of brown-macroalgae.


Author(s):  
R. Edgecock ◽  
V. V. Bratishko ◽  
I. V. Zinchenko ◽  
S. H. Karpus ◽  
D. O. Milko ◽  
...  

Annotation Purpose. Summarize the regulatory and technological requirements for the production of organic (organo-mineral) fertilizers on the base of sewage sludge. Methods. Analysis and generalization of the requirements of regulatory documents on the management of organic waste and their use as raw materials for the production of organic fertilizers and soil improvers. Results. The current legislative, departmental and regulatory documentary base in Ukraine concerning the treatment of sediment resulting from biological sewage treatment at municipal wastewater treatment plants for its further use in agriculture as fertilizers is analysed. Indicators are identified and analysed to determine the possibility, feasibility, efficiency and scope of organic fertilizers produced using sewage sludge. The analysis of changes in the content of organic matter and total nitrogen in the sewage sludge during its storage at the sewage treatment plant sites is presented. The technological feasibility of using sludge of different shelf life in composting production has been determined. Conclusions 1. The regulatory framework of Ukraine contains a sufficiently complete list of indicators that should be met by organic raw materials (sewage sludge) for further use as organic fertilizers. Some of these indicators – bio security and heavy metals content – can be improved in the composting process of fertilizers. 2. Fresh sediment, as well as sediment accumulated in the last late autumn and winter periods, is of main value for use as a raw material in the production of organic fertilizers. 3. The use in the production of compost sludge stored on sludge sites for a period of half a year or more requires special control of the process of decontamination. In this case, it is advisable to use additional means of wastewater decontamination. Keywords: heavy metals, manure, humus, decontamination, composting, organic fertilizers, sewage sludge.


Sign in / Sign up

Export Citation Format

Share Document