scholarly journals Pendugaan Temperatur Bawah Permukaan Berdasarkan Kehadiran Mineral Alterasi Pada Sumur Llk-1 Lapangan Panasbumi Lilli, Kabupaten Polewali Mandar, Provinsi Sulawesi Barat

2017 ◽  
Vol 14 (3) ◽  
pp. 287
Author(s):  
Fazillah Adzka ◽  
Aton Patonah ◽  
Simarmata S. L. Robertus
Keyword(s):  
Mineral Composition ◽  
Geothermal Field ◽  
Alteration Zone ◽  
Mineral Association ◽  
Oxide Mineral ◽  
The North ◽  
Primary Mineral ◽  
Mineral Alteration

Lapangan Panasbumi Lilli secara adminstratif  termasuk ke dalam wilayah Kecamatan Matanga, Kabupaten Polewali Mandar, Provinsi Sulawesi Barat. Hasil penyelidikan terdahulu diketahui memiliki daerah prospek seluas 18 km2 yang masih membuka ke arah utara. Fokus penelitian ini adalah memperkirakan temperatur bawah permukaan dari sumur  LLK-1 untuk menentukan zona reservoir dan zona penudungnya. Metode yang digunakan adalah petrografi dan alat SpecTerra untuk mengetahui jenis mineral lempung. Berdasarkan deskripsi dan analisis komposisi mineral primer dan alterasi pada batuan dari sumur tersebut diketahui bahwa batuan pada sumur LLK-1 dari bawah ke permukaan adalah porfiri andesit terubah dan andesit terubah. Mineral alterasi yang hadir adalah saponite, monmorilonite, smectite, chlorite, mineral oksida dan pirit. Berdasarkan asosiasi mineral alterasi tersebut, zona alterasi terbagi ke dalam 2 zona, yaitu zona smectite dan zona smcetite-chlorite yang merupakan sebanding dengan tipe argilik dan subprofilitik, terbentuk pada temperatur 50oC – 230oC.  Hasil data tersebut, maka sumur LLK-1 masih  termasuk ke dalam zona penudung. Kata Kunci : Alterasi, Paleotemperatur, Panasbumi Lilli Lilli Geothermal Field administratively located in Matanga, Polewali Mandar Districts, West Sulawesi. Result from latest investigation shows that this area have a prospect about 18 km2 with distribution spreading probabilility to the North. Focus of this research is to estimate temperature below the surface from well LLK-1 (Lilli Geothermal field) to understand the reservoir and caps rock zone using petrography and SpecTerra measurement.  Based on description and primary mineral composition, also from mineral alteration, well LLK-1 has altered andecite porfiri to altered andecite. Alteration mineral that can be found are saponite, montmorilonite, smectite, chlorite, oxide mineral and pyrite. From the alteration mineral association, alteration zone can be divided into two zone, there are smectite and smectite-chlorite zone that comparable with argilic and subpropilitic type that can be formed at 50°C - 230°C. It is conclude that LLK-1 well still include in the caps rock zone so the reservoir zone cannot be determined.  Keywords: Alteration, Paleotemperature, Lilli Geothermal Field

scholarly journals Geothermal field and geology of the Caspian Sea region

2019 ◽  
pp. 104-118 ◽  
Author(s):  
Vladimir I. Zui ◽  
Siamak Mansouri Far Far
Keyword(s):  
Heat Flow ◽  
Flow Pattern ◽  
Caspian Sea ◽  
Sedimentary Basins ◽  
Geothermal Field ◽  
Flow Density ◽  
General Tendency ◽  
The Caspian Sea ◽  
Northern Iran ◽  
The North

The Caspian Sea and adjacent areas form the vast oil and gas-bearing megabasin. It consists of North Caspian, Middle Caspian, and South Caspian sedimentary basins. The granite-metamorphic basement of the basins becomes from north to south younger in the direction from Early Precambrian to Early Cimmerian age. It represents a transitional zone from the southern edge of the East European Craton to Alpine folding. Geothermal investigations have been carried out both in hundreds of deep boreholes and within the Caspian Sea and a few preliminary heat flow maps were published for the Caspian Sea region. All they excluded from consideration the southern part of the region within Iranian national borders. We prepared a new heat flow map including the northern Iran. The purpose of the article is to consider heat flow pattern within the whole Caspian Sea region including its southern part. Two vast high heat flow anomalies above 100 mW/m2 distinguished in the map: within the southwestern Iran and in waters of the Caspian Sea to the North of the Apsheron Ridge, separated by elongated strip of heat flow below 50 –55 mW/m 2 . A general tendency of heat flow from growing was distinguished from the Precambrian crustal blocks of the North Caspian Depression to the Alpine folding within the territory of Iran. Analysis of the heat flow pattern is discussed and two heat flow density profiles were compiled.

The Westwood Deposit, Southern Abitibi Greenstone Belt, Canada: An Archean Au-Rich Polymetallic Magmatic-Hydrothermal System—Part II. Hydrothermal Alteration, Mineralization, and Geologic Model

2021 ◽  
Author(s):  
D. Yergeau ◽  
P. Mercier-Langevin ◽  
B. Dubé ◽  
V. McNicoll ◽  
S. E. Jackson ◽  
...  
Keyword(s):  
Hydrothermal System ◽  
Greenstone Belt ◽  
Massive Sulfide ◽  
Alteration Zone ◽  
Intrusive Complex ◽  
Calc Alkaline ◽  
Abitibi Greenstone Belt ◽  
The North ◽  
Vms Deposits ◽  
Ore Zones

Abstract The Westwood deposit, located in the Archean Doyon-Bousquet-LaRonde mining camp in the southern Archean Abitibi greenstone belt, contains 4.5 Moz (140 metric t) of gold. The deposit is hosted in the 2699–2695 Ma submarine, tholeiitic to calc-alkaline volcanic, volcaniclastic, and intrusive rocks of the Bousquet Formation. The deposit is located near the synvolcanic (ca. 2699–2696 Ma) Mooshla Intrusive Complex that hosts the Doyon epizonal intrusion-related Au ± Cu deposit, whereas several Au-rich volcanogenic massive sulfide (VMS) deposits are present east of the Westwood deposit. The Westwood deposit consists of stratigraphically stacked, contrasting, and overprinting mineralization styles that share analogies with both the intrusion-related and VMS deposits of the camp. The ore zones form three distinct, slightly discordant to stratabound corridors that are, from north (base) to south (top), the Zone 2 Extension, the North Corridor, and the Westwood Corridor. Syn- to late-main regional deformation and upper greenschist to lower amphibolite facies regional metamorphism affect the ore zones, alteration assemblages, and host rocks. The Zone 2 Extension consists of Au ± Cu sulfide (pyrite-chalcopyrite)-quartz veins and zones of disseminated to semimassive sulfides. The ore zones are spatially associated with a series of calc-alkaline felsic sills and dikes that crosscut the mafic to intermediate, tholeiitic to transitional, lower Bousquet Formation volcanic rocks. The metamorphosed proximal alteration consists of muscovite-quartz-pyrite ± gypsum-andalusite-kyanite-pyrophyllite argillic to advanced argillic-style tabular envelope that is up to a few tens of meters thick. The North Corridor consists of auriferous semimassive to massive sulfide veins, zones of sulfide stringers, and disseminated sulfides that are hosted in intermediate volcaniclastic rocks at the base of the upper Bousquet Formation. The Westwood Corridor consists of semimassive to massive sulfide lenses, veins, zones of sulfide stringers, and disseminated sulfides that are located higher in the stratigraphic sequence, at or near the contact between calc-alkaline dacite domes and overlying calc-alkaline rhyodacite of the upper Bousquet Formation. A large, semiconformable distal alteration zone that encompasses the North Corridor is present in the footwall and vicinity of the Westwood Corridor. This metamorphosed alteration zone consists of an assemblage of biotite-Mn garnet-chlorite-carbonate ± muscovite-albite. A proximal muscovite-quartz-chlorite-pyrite argillic-style alteration assemblage is associated with both corridors. The Zone 2 Extension ore zones and associated alteration are considered synvolcanic based on crosscutting relationships and U-Pb geochronology and are interpreted as being the distal expression of an epizonal magmatic-hydrothermal system that is centered on the upper part of the synvolcanic Mooshla Intrusive Complex. The North and Westwood corridors consist of bimodal-felsic Au-rich VMS-type mineralization and alteration produced by the convective circulation of modified seawater that included a magmatic contribution from the coeval epizonal Zone 2 Extension magmatic-hydrothermal system. The Westwood Au deposit represents one of the very few documented examples of an Archean magmatic-hydrothermal system—or at least of such systems formed in a subaqueous environment. The study of the Westwood deposit resulted in a better understanding of the critical role of magmatic fluid input toward the formation of Archean epizonal intrusion-related Au ± Cu and seafloor/subseafloor Au-rich VMS-type mineralization.

scholarly journals Chemical and isotopic characterization of the thermal fluids emerging along the North–Northeastern Greece

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
E. Dotsika ◽  
P. Dalampakis ◽  
E. Spyridonos ◽  
G. Diamantopoulos ◽  
P. Karalis ◽  
...  
Keyword(s):  
Geothermal Field ◽  
Chemical Compositions ◽  
Geothermal Systems ◽  
High Enthalpy ◽  
Thermal Fluids ◽  
The North ◽  
Geothermal Fields ◽  
West Part ◽  
Distinct Source ◽  
Isotopic Characterization

AbstractHydrochemical and isotopic characteristics of fluids from major geothermal fields of middle/low temperature in N/NE Greece are examined [basins: Strymon River (SR), Nestos River Delta (ND), Xanthi–Komotini (XK), Loutros–Feres–Soufli (LFS) and Rhodope Massif]. The geodynamic context is reflected to isotopic/chemical composition of fluids, heat flow values and elevated CO2 concentrations in emitted fluids. B and Li are derived from leaching of the geothermal systems hosting rocks. δ18OH2O, δ18OSO4, δ13CCO2 values and chemical compositions of Cl, B and Li of geothermal discharges suggest two distinct source fluids. Fluids in SR exhibit high B/Cl and Li/Cl ratios, suggesting these constituents are derived from associated magmas of intermediate composition (andesitic rocks). Geothermal discharges in LFS exhibit low B/Cl and Li/Cl ratios, implying acid (rhyolitic) magmatism. δ13CCO2 and CO2/(CO2 + 105He) ratios in the west part, suggest fluids affected by addition of volatiles released from subducted marine sediments. For the eastern systems, these ratios suggest gas encountered in systems issued from mixing of crustal and mantle-derived volatiles. Isotopic geothermometers reflect, for the same direction, equilibrium processes more (LFS, XK) or less (SR) pronounced and discriminate the geothermal field from low to middle [SR, ND (Erasmio)] and middle to high enthalpy [ND (Eratino), LFS, XK].

Petrogenesis of amphibole – biotite – calcite – plagioclase alteration and laminated gold – silver quartz veins in four Archean shear zones of the Norseman district, Western Australia

1992 ◽  
Vol 29 (3) ◽  
pp. 388-417 ◽  
Author(s):  
Andreas G. Mueller
Keyword(s):  
Western Australia ◽  
Shear Zones ◽  
Wall Rock ◽  
Alteration Zone ◽  
Mining District ◽  
Low Grade ◽  
Fluid Temperature ◽  
Quartz Veins ◽  
The North ◽  
Gold Silver

The Norseman mining district in the Archean Yilgarn Block, Western Australia, has produced 140 t of gold and about 90 t of silver from 11.24 × 106 t of ore. The district is located within a metamorphic terrane of mafic and minor ultramafic greenstones, intruded by granite cupolas and swarms of porphyry dykes. The orebodies consist of laminated quartz veins, controlled by narrow (0.5–5 m) reverse shear zones that, in general, follow the contacts of metapyroxenite or porphyry dykes. Petrological studies of four shear zones, exposed on the Regent shaft 14 level, Ajax shaft 10 level, and in the stope above the North Royal shaft 5 level, show that the host rocks were metamorphosed to hornblende–plagioclase amphibolites and actinolite–chlorite rocks at temperatures of 500–550 °C prior to mineralization.At the localities studied, intense wall-rock replacement and low-grade (0.5 g/t) gold mineralization are confined to ductile or brittle–ductile shear structures. Alteration is similar in both ultramafic and mafic greenstones, and consists of an inner zone of biotite–quartz–calcite–plagioclase rock with minor actinolitic hornblende and quartz–calcite–actinolite veinlets, and an outer zone, locally developed, of chlorite–calcite–quartz rock. At an estimated pressure of 3 kbar (300 MPa), fluid temperatures during wall-rock alteration are constrained by the hydrothermal mineral assemblages to 480 ± 30 °C in two shear zones on the Regent shaft 14 level, and to 450 ± 20 °C in one shear zone in the North Royal shaft 5 level stope. The mole fraction of CO2 of the fluids is estimated at [Formula: see text], and the sulphur fugacity at 10−6 bar (10−1 kPa) (at 450 °C), based on the assemblage pyrrhotite + pyrite ± arsenopyrite. The development of an outer chloritic alteration zone at North Royal is related to the lower fluid temperature at this locality.High-grade (up to 75 g/t Au, 283 g/t Ag) veins formed within three of the shear zones studied at fluid temperatures of 400 °C and less, by the successive accretion of quartz laminae, separated by films of retrograde chlorite and sericite. The assemblage of ore minerals in the veins differs from that in the altered wall rocks, and includes disseminated galena, Pb–Bi–Ag tellurides, and native gold, which coprecipitated with the quartz. The orebodies at Norseman show affinities to Phanerozoic and Archean gold skarn deposits.

Acid-sulphate hydrothermal alteration of andesitic tuffs and genesis of halloysite and alunite deposits in the Biga Peninsula, Turkey

Clay Minerals ◽  
2008 ◽  
Vol 43 (2) ◽  
pp. 281-315 ◽  
Author(s):  
Ö. I. Ece ◽  
P. A. Schroeder ◽  
M. J. Smilley ◽  
J. M. Wampler
Keyword(s):  
Hydrothermal Alteration ◽  
Volcanic Rocks ◽  
Geothermal Field ◽  
Parent Material ◽  
Thermal Waters ◽  
Geothermal Waters ◽  
Biga Peninsula ◽  
The North ◽  
Clay Deposits ◽  
Nw Turkey

AbstractThe Biga Peninsula of NW Turkey is host to six major halloysite deposits in the Go¨nen, Yenice and Balya districts. Mineralization took place in areas of Permian limestone blocks where the Triassic Karakaya Complex is in contact with early Miocene calc-alkaline volcanic rocks. Hypogene halloysite mineralization was controlled by the intersection of minor faults in the vicinity of clay deposits. During the Pleistocene, activity of the North Anatolian Fault (NAF) brought ascending geothermal solutions through the fault zones to the surface, which led to hydrothermal alteration and halloysite formation. N-MORB normalized element values for each halloysite deposit and the volcanic rocks suggest genetic links. Alunite and halloysite were formed in the Turplu area where upwelling hydrothermal waters contained major H2S and SO2acids. Only halloysite mineralization occurred in outflow areas of the same fossil geothermal field.Pyrite and alunite samples from the Turplu deposits have δ34S values of 0.6–1.8% and 4.8–7.9%, respectively, with values for gypsum of 3.1–3.5%. The δ34S values of pyrite suggest that local meteoric waters had partially mixed with the dominant fluid during the closure stage of fossil hydrothermal activities. The range of δD values of halloysite samples from Turplu is –58.4 to –68.6%. The δ18O values for halloysite are in the range 16.7–18.1%. All halloysite deposits in the study areas are either overlying or adjacent to limestone blocks, and these provide excellent drainage for the discharging geothermal waters. Subsurface drainage systems in the karstic environment and the SO2-bearing thermal waters indicate the importance of acidic waters and the continuous leaching of elements in forming relatively pure hydrated halloysite. A steam-heated dissolution-precipitation model is proposed for the occurrence of all halloysite and alunite deposits. Sulphur gases (H2S-SO2) of hypogene origin rose from deep in the fault zone to the surface where they encountered oxygenated groundwater at the water table. The occurrence of H2SO4in this hydrothermal system enhanced the acidity of geothermal waters provoking advanced argillic alteration. Hypogene alunite deposits also have large P2O5contents, suggesting a parent material with a magmatic origin deeper than the alkaline tuffs. Halloysite is a fast-forming metastable precursor to kaolinite.

scholarly journals USING INDEX AND CUMULATIVE OVERLAY ANALYSES TO DETERMINE GEOTHERMAL POTENTIAL TARGETS IN DAMAVAND REGION

2019 ◽  
Vol XLII-4/W18 ◽  
pp. 867-873
Author(s):  
A. R. Rahmati ◽  
A. Moradzadeh ◽  
P. Pahlavani ◽  
M. R. Rahmani
Keyword(s):  
Fuzzy Ahp ◽  
Thermal Flux ◽  
Geothermal Field ◽  
High Potential ◽  
Weighted Index ◽  
The North ◽  
Overlay Method ◽  
North Of Iran ◽  
Index Overlay ◽  
Gis Environment

Abstract. The Damavand region is located in the north of Iran and north-eastern of Tehran. In the present study, geothermal favorability map in this region has been prepared using two methods of data integration in the geographic information system (GIS) environment. The purpose of this study is to introduce the areas with high potential of geothermal field in Damavand region for subsequent exploratory program. For this purpose, at first, necessary information layers identified and studied and then were processed. The 13 layers were identified and collected and integration with two cumulative and weighted index overlay methods and compared. After a survey of experts, the weights used in the weighted index overlay method were obtained from the Fuzzy /Ahp method. In the result of cumulative overlay method, south and southeast of Damavand volcano are favorable area for geothermal field but the result of the weighted index overlay method indicates the high potential of the southeastern region of Damavand. Comparing the results with gradient and thermal flux from drilling by the ENEL Italian Company, indicate the accuracy and precision of the obtained results.

scholarly journals Structural-lithological geological-genetic model and mineral composition of Krasnokutskaya rare-metal-titanium placer deposits (Ukraine)

2019 ◽  
pp. 540-556
Author(s):  
E. A. Ganja ◽  
A. V. Lalomov ◽  
A. V. Chefranova ◽  
A. V. Grigor’eva ◽  
L. O. Magazina
Keyword(s):  
Mineral Composition ◽  
Genetic Model ◽  
Rare Metal ◽  
Mineral Deposit ◽  
Donets Basin ◽  
The North ◽  
North Eastern ◽  
Placer Deposits ◽  
Metal Titanium

The conditions of the occurrence, structure, material composition and controlling factors of Krasnokutsky rare-metal-titanium placer deposit localized in the Miocene sediments of the North-Eastern slope of the Dnieper-Donets basin are investigated. Distinguished lithofacies complexes (alluvial-deltaic, coastal and shallow marine, aeolian) correspond to the Lower (Aquitanian), Middle (Burdigalian) and Upper (Langhian) members of Novopetrovskaya Formation of Miocene. Placer bodies are localized in the littoral marine-coastal complexes of Middle Novopetrovskaya sub-formation. Placerforming process is related to phases of stabilization of the shoreline of the regressive phase of the Sub-Paratetic basin. Main search and forecasting criteria for the identification of promising sites within the Kharkiv-Sumy placer-bearing zone are stabilization of the shoreline in the Middle Novopetrovskaya time simultaneously with development of transverse thereto alluvial-deltaic structures that supply weak mineralized sediments. Also, the deltaic ledge breaking the monotony coastal migration and playing the role of structural-sedimentary traps. The developed digital structural-lithological model of the Krasnokutskoye mineral deposit allows us to offer a set of criteria for comparative evaluation of different placer-bearing areas in order to determine the order of their development. The mineral composition of productive deposits is typical for the placers of the region and for rare-metal-titanium placers as a whole; the increased content of rutile and zircon, which rise the industrial value of placers of this zone, are associated with the influence of crystalline rocks of the Voronezh massif.

Sign in / Sign up

Export Citation Format

Share Document