scholarly journals Characterization and Antimicrobial Characteristics of Chitosan Modified Hibiscus Sabdariffal.Extract

2018 ◽  
Vol 14 (3) ◽  
pp. 5851-5857
Author(s):  
Fatma Elzhraa Mansour
Keyword(s):  
Thin Films ◽  
Inhibition Zone ◽  
Amorphous Structure ◽  
X Ray Diffraction ◽  
Polymeric Product ◽  
X Ray ◽  
Antimicrobial Studies ◽  
Extract Content ◽  
Ft Ir

Samples of Chitosan (Cs) natural polymer containing successive amount of Hibiscus sabdariffaLextract were sucssesfuly synthesized using traditional simple casting route. Prepared thin films were characterized using fourier transform infrared (FTIR). FT-IR of synthesized thin films reveals maintenance of the characteristic bands of chitosan in addition to the appearance of two new sharp intense bands at 1782 and 954 cm-1 intensified with increasing plant extract content and assigned to the interaction between NH2 of polymer skeleton with falvanoids present in the extract. Obtained data poit out to a formation of homogenous composite structure. X-ray diffraction data (XRD) reval no prounounced band indicating the amorphous structure of synthesized final polymeric product. In vitro antimicrobial studies were performed using both gram negative and positive bacteria in addition to Fungul and Yeast activity using simple minimum inhibition zone (MIZ) standeredroutain.

A study on using expanded perlite with hydroxyapatite: Reinforced bio-composites

2021 ◽  
pp. 095441192199656
Author(s):  
Erdoğan Karip ◽  
Mehtap Muratoğlu
Keyword(s):  
Body Fluid ◽  
Xrd Analysis ◽  
Cold Isostatic Pressing ◽  
Expanded Perlite ◽  
X Ray Diffraction ◽  
Pressing Method ◽  
X Ray ◽  
Infra Red ◽  
Ft Ir

People are exposed to different kinds of diseases or various accidents in life. Hydroxyapatite (HA) has been widely employed for bone treatment applications. In this study, HA was extracted from sheep bones. Bio-composites were doped with 1, 5, and 10 wt.% of expanded perlite and 5 wt.% of ZrO2–MgO-P2O5. The bio-composites were prepared by the cold isostatic pressing method (250 MPa) and sintered at 900°C for 1 h. In order to evaluate the characteristics of the bio-composites, microhardness, density, X-ray diffraction (XRD), Fourier transform infra-red spectroscopy (FT-IR), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) analyses were carried out on them. Additionally, the specimens whose characteristics were determined were kept in synthetic body fluid (SBF), and their in vitro behavior was examined. As a result, it was observed that microhardness increased as both the weight and the grain size of the expanded perlite were increased. Calcium silicate, tri-calcium phosphate, and hydroxyapatite were observed in the XRD analysis of all samples, and the formation of apatite structures was increased by addition of ZrO2–MgO–P2O5.

Mesenchymal Stem Cell Response to Surface Altered Porous Ti

2015 ◽  
Vol 638 ◽  
pp. 67-72
Author(s):  
Ana Maria Salantiu ◽  
Florin Popa ◽  
Petru Pascuta ◽  
Olga Soritau ◽  
Noemi Dirzu ◽  
...  
Keyword(s):  
Stem Cell ◽  
X Ray Diffraction ◽  
X Ray ◽  
Chemically Modified ◽  
Porous Ti ◽  
Average Porosity ◽  
Ft Ir ◽  
Cell Testing ◽  
Scanning Electron

This work aims to investigate the influence of surface conditioning of porous Ti for enhancing its biological activity, as assessed by in vitro stem cell testing. Porous Ti samples with an average porosity of 32% were processed by Powder Metallurgy with dextrin as a space holder. The samples were subjected to H2O2 treatment to form an enhanced TiO2 film, followed by a heat treatment at 400°C and 600°C aiming to the crystallization of the as-formed amorphous titanium oxide. Samples characterization was performed by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FT-IR) and X-Ray Diffraction (XRD). The treated surfaces revealed to be made of both anatase and rutile TiO2, with groove–shaped structure and cracks on the surface of the TiO2 film. The intrinsic biocompatibility of the chemically modified porous Ti surfaces was assessed in vitro. In our cell culture tests, stem cells were found to attach and proliferate better on the chemically treated Ti surfaces compared to the control untreated Ti surfaces.

Synthesis, Characterization and Optical Properties of PLA / P3HT Blends Thin Films

2021 ◽  
Vol 19 (5) ◽  
pp. 132-138
Author(s):  
Maan Abd-Alameer Salih ◽  
Q.S. Kareem ◽  
Mohammed Hadi Shinen
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Spin Coating ◽  
Ring Opening ◽  
Energy Gap ◽  
Ring Opening Polymerization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Conductivity Increase ◽  
Ft Ir

In this exploration Poly lactic corrosive (PLA) was orchestrated the ring-opening polymerization Poly lactic corrosive (PLA) blended with poly(3-hexylthiophene) (P3HT) which prepared by solution. Blends thin films Synthesis by spin coating technique and using Tetrahydrofuran (THF) as solvent. PLA powder was 'characterized by' 'X-ray' 'diffraction', '(FT-IR)'. pure Optical properties (PLA), (PLA)/P3HT blends thin films with different percentage of P3HT (0, 1, 2, and 3) wt% were investigated using UV-VS spectroscopy The results showed that the absorption, absorption coefficient, extinction coefficient and conductivity increase with increasing the rate of deformation P3HT, The energy gap decreases with increasing deformation.

Effect of Substrate Temperature on the Electrochromic Properties of Cobalt Hydroxide Thin Films Prepared by Reactive Sputtering

2011 ◽  
Vol 1328 ◽  
Author(s):  
KyoungMoo Lee ◽  
Yoshio Abe ◽  
Midori Kawamura ◽  
Hidenobu Itoh
Keyword(s):  
Thin Films ◽  
Substrate Temperature ◽  
Indium Tin Oxide ◽  
Large Change ◽  
Amorphous Structure ◽  
Cobalt Hydroxide ◽  
X Ray Diffraction ◽  
X Ray ◽  
Glass Substrates ◽  
Substrate Temperatures

ABSTRACTCobalt hydroxide thin films with a thickness of 100 nm were deposited onto glass, Si and indium tin oxide (ITO)-coated glass substrates by reactively sputtering a Co target in H2O gas. The substrate temperature was varied from -20 to +200°C. The EC performance of the films was investigated in 0.1 M KOH aqueous solution. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy of the samples indicated that Co3O4 films were formed at substrate temperatures above 100°C, and amorphous CoOOH films were deposited in the range from 10 to -20°C. A large change in transmittance of approximately 26% and high EC coloration efficiency of 47 cm2/C were obtained at a wavelength of 600 nm for the CoOOH thin film deposited at -20°C. The good EC performance of the CoOOH films is attributed to the low film density and amorphous structure.

scholarly journals A Study on the Characteristics of Cu–Mn–Dy Alloy Resistive Thin Films

Coatings ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 118 ◽  
Author(s):  
Ho-Yun Lee ◽  
Chi-Wei He ◽  
Ying-Chieh Lee ◽  
Da-Chuan Wu
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Annealing Temperature ◽  
Phase Evolution ◽  
Amorphous Structure ◽  
X Ray Diffraction ◽  
Temperature Coefficient Of Resistance ◽  
X Ray ◽  
Transmission Electronmicroscopy ◽  
Scanning Electron

Cu–Mn–Dy resistive thin films were prepared on glass and Al2O3 substrates, which wasachieved by co-sputtering the Cu–Mn alloy and dysprosium targets. The effects of the addition ofdysprosium on the electrical properties and microstructures of annealed Cu–Mn alloy films wereinvestigated. The composition, microstructural and phase evolution of Cu–Mn–Dy films werecharacterized using field emission scanning electron microscopy, transmission electronmicroscopy and X-ray diffraction. All Cu–Mn–Dy films showed an amorphous structure when theannealing temperature was set at 300 °C. After the annealing temperature was increased to 350 °C,the MnO and Cu phases had a significant presence in the Cu–Mn films. However, no MnO phaseswere observed in Cu–Mn–Dy films at 350 °C. Even Cu–Mn–Dy films annealed at 450 °C showedno MnO phases. This is because Dy addition can suppress MnO formation. Cu–Mn alloy filmswith 40% dysprosium addition that were annealed at 300 °C exhibited a higher resistivity of ∼2100 μΩ·cm with a temperature coefficient of resistance of –85 ppm/°C.

Synthesis, Characterization and X-Ray Crystal Structure of the New Schiff Base and Anticandidal Evaluation

2019 ◽  
Vol 41 (6) ◽  
pp. 1090-1090
Author(s):  
Mehmet Poyraz Mehmet Poyraz ◽  
Musa Sari Musa Sari ◽  
Halil Berber Halil Berber ◽  
Nursenem Karaca and Fatih Demirci Nursenem Karaca and Fatih Demirci
Keyword(s):  
Schiff Base ◽  
Spectroscopic Techniques ◽  
X Ray Diffraction ◽  
X Ray ◽  
Microdilution Method ◽  
Broth Microdilution Method ◽  
Ft Ir ◽  
Anticandidal Activity ◽  
Crystal Structural

A new Schiff base, namely 2-methoxy-6-((2-(4 nitrophenyl) hydrazineylidene) methyl)phenol was synthesized and characterized by melting points, elemental analysis, thermogravimetric analysis and spectroscopic techniques (FT-IR, 1H-NMR and UV-VIS spectra). The chemical structure of compound was further confirmed by single crystal structural X-ray diffraction. The Schiff base is crystallized in the triclinic space group P-1. In the crystal, molecules are linked by O-H…O hydrogen bonds between the hydroxy “-O-” atom and the methoxy “-O-” atom. Furthermore, the synthesized Schiff base was tested for the in vitro anticandidal activities using CLSI broth microdilution method against human pathogenic Candida albicans, C. parapsilosis and C. krusei standard strains. In the anticandidal activity test results, the new Schiff base was found to be effective at 1 mg/mL - 0.25 mg/mL concentrations. (The last line omitted) (The sentence marked in red will be deleted)

scholarly journals Controlled Release of Ropivacaine from Single-Armed (1-PCL) and Four-Armed PCL (4-PCL) Microspheres

2019 ◽  
Vol 2019 ◽  
pp. 1-8
Author(s):  
Wei Xiong ◽  
Yue-kun Shen ◽  
Peng Dong ◽  
Ying Xiao ◽  
Xiong-qing Huang ◽  
...  
Keyword(s):  
Chronic Pain ◽  
Cell Proliferation ◽  
Mammalian Cells ◽  
Great Promise ◽  
X Ray Diffraction ◽  
X Ray ◽  
Initial Release ◽  
Release Assay ◽  
Ft Ir

Sustained release of anesthesia has shown great promise in the treatment of chronic pain in patients. In this research, we used neutralized ropivacaine as an anesthesia and poly(ε-caprolactone) (PCL) with different architectures to systematically study how these architectures affect the release of ropivacaine. After optimizing the parameters of the preparation of microspheres, ropivacaine-loaded 1-PCL microspheres and 4-PCL microspheres were obtained. Fourier Transform infrared spectra (FT-IR) and X-ray diffraction spectra (XRD) confirmed that ropivacaine was encapsulated within the microsphere rather than inserted on the surface of the microsphere. Ropivacaine was found to be buried deeper in the 1-PCL microsphere than in the 4-PCL microsphere. In vitro release assay revealed that small crystalline grains interfered with ropivacaine release in 4-PCL microspheres during the initial release period, but then two kinds of microspheres showed a similar ropivacaine release rate. We basically proved that the architecture of PCL has a negligible effect on ropivacaine release. Cell proliferation test revealed that the release of products from the microspheres resulted in insignificant toxicity towards mammalian cells.

Preparation and CO2 Gas Sensitive Properties of CuO-SrTiO3-Based Semiconductor Thin Films

2007 ◽  
Vol 280-283 ◽  
pp. 311-314 ◽  
Author(s):  
Yan Fei Gu ◽  
Hui Ming Ji ◽  
Bin Zhang ◽  
Ting Xian Xu
Keyword(s):  
Thin Films ◽  
Chelating Agents ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Good Resistance ◽  
Gas Sensitivity ◽  
X Ray ◽  
Semiconductor Thin Films ◽  
Wide Range ◽  
Ft Ir

CuO-SrTiO3-based thin films were prepared by novel sol-gel technology on Al2O3 substrates using Cu(NO3)2, SrCl2 and TiCl4 as the starting materials, critic acid and ethylene glycol as chelating agents. CO2 sensing properties of the films were investigated. Structure characteristics of the sol and asgrown thin films were analyzed by FT-IR spectrum, X-ray diffraction and SEM. The results reveal that the films consisted of CuO phase and SrTiO3 phase have nanocrystalline microstructure at 750°C for 40 min. The modified CuO-SrTiO3 thin films exhibit good resistance-temperature and gas sensitivity properties in a wide range of temperature. The films exposed to 6% CO2 show that sensitivity are 32, and response and recover time are within 2 s at 250 °C operating temperature.

Green preparation of carbon dots for Hg2+ detection and cell imaging

2020 ◽  
Vol 10 (11) ◽  
pp. 1777-1787
Author(s):  
Yadian Xie ◽  
Shanshan Wang ◽  
Ning Fu ◽  
Yan Yang ◽  
Xingliang Liu ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Carbon Dots ◽  
High Sensitivity ◽  
Amorphous Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Carbon And Nitrogen ◽  
Transmission Electron ◽  
Sensitivity And Selectivity ◽  
Ft Ir

Carbon dots (CDs) also nitrogen-doped CDs (N-CDs) were produced by green hydrothermal synthesis using Pea and ethanediamine as the carbon and nitrogen source, separately. Transmission electron microscopy (TEM) images displayed that the prepared CDs and N-CDs were well dispersed, had a spherical morphology. X-ray diffraction (XRD) figures of CDs and N-CDs presented a graphitic amorphous structure. Fourier transform infrared spectroscopy (FT-IR) verified that CDs and N-CDs carried many different hydrophilic groups (for example hydroxyl, carboxyl/carbonyl, amide, amino groups) on the surface, X-ray photoelectron spectroscopy (XPS) together verified this result. However, the optical properties and fluorescence quantum yield for N-CDs were obviously superior to those of CDs. Furthermore, the prepared N-CDs displayed outstanding advantages including low toxicity, satisfactory biocompatibility, and excellent chemical stability. More prominently, the prepared N-CDs could detect Hg2+ ions with high sensitivity and selectivity in both water samples and HeLa cells.

Preparation of N, O-Carboxymethyl Chitosan with Different Substitutional Degree and its Application for Hemostasis

2013 ◽  
Vol 798-799 ◽  
pp. 1061-1066 ◽  
Author(s):  
Yan Wei Zhao ◽  
Lu Liu ◽  
Xiang Han ◽  
Jing Guan
Keyword(s):  
Carboxymethyl Chitosan ◽  
X Ray Diffraction ◽  
Clotting Time ◽  
X Ray ◽  
Angle Measurements ◽  
Contact Angle Measurements ◽  
Ft Ir ◽  
Ubbelohde Viscometer

We prepared N, O-carboxymethyl chitosans (CMCSs) with different substitutional degrees (SDs) to evaluate their effects of hemostasis, and provided experimental basis on biomedical materials. Chloroethanoic acid was used to synthesize CMCSs. The structure were characterized by Fourier transform infrared (FT-IR) and wide-angle X-ray diffraction (WXRD). Potentiometric titration and Ubbelohde viscometer were adopted to determine the SD and intrinsic viscosity of CMCSs. Contact angle measurements were investigated to determine surface wettability. Method of dynamic clotting time and coagulation test in vivo were used to evaluate their effects of hemostasis. SDs of CMCSs were from 50% to 110%. As the SD increased, molecular weight decreased. CMCS powder with SD 63% possessed excellent hemostasis both in vitro and in vivo. CMCS powder owned hemostatic capability prior to CS. CMCS powder with SD 63% (neither too high, nor too low) possessed excellent hemostasis both in vitro and in vivo.

Sign in / Sign up

Export Citation Format

Share Document