scholarly journals Assessment of genetic variability in different kenaf (Hibiscus cannabinus) germplasm using morpho-agronomic traits

2020 ◽  
pp. 5-12
Author(s):  
Arju Miah ◽  
A. K. M. Shahadat Hossain ◽  
Nihar Ranjan Saha ◽  
Md. S. M. Shahriar Parvej ◽  
Md. Younus Ali ◽  
...  
Keyword(s):  
Genetic Variability ◽  
Agronomic Traits ◽  
Hibiscus Cannabinus ◽  
Agronomic Characters ◽  
Base Diameter ◽  
Effective Utilization ◽  
Varietal Identification ◽  
Superior Genotypes ◽  
Stem Colour ◽  
Better Than

Kenaf (Hibiscus cannabinus L.) is a fiber crop classified in the genus Hibiscus (Malvaceae), and has a great potential for its multipurpose utilization, in addition to its traditional usage. Varietal identification of kenaf is always problematic and knowledge on genetic variability of kenaf varieties is also limited, which significantly hindered our effective utilization and conservation of the valuable kenaf germplasm. In order to find a proper method for identifying kenaf varieties and studying their variation, morpho-agronomic characters were analyzed. Fifty eight accessions of kenaf germplasm collected from Gene Bank Department of Bangladesh Jute Research Institute were characterized at Jute Agriculture Experiment Station, Manikganj during April 2014 to December 2014. The accessions were characterized for fifteen morpho-agronomic attributes as per Hibiscus descriptor in order to select superior genotypes for the genetic improvement of kenaf. Considerable ranges of variability were observed in stem colour, petiole colour, plant height, base diameter, dry fibre weight, dry core weight, green weight with leaves and green weight without leaves. Based on major yield contributing characters accessions 1653, 3384, 3928 and 4202 performed better than the control varieties HC-2 and HC-95.

scholarly journals Assessment of genetic divergence of deshi jute (Corchorus capsularis) germplasms by using phenotypic characters

2020 ◽  
Vol 31 (1) ◽  
pp. 10-18
Author(s):  
A Miah ◽  
NR Saha ◽  
MY Ali ◽  
M Kamrujjaman ◽  
MSMS Parvej
Keyword(s):  
Genetic Divergence ◽  
Agronomic Traits ◽  
Seed Traits ◽  
Base Diameter ◽  
Qualitative Traits ◽  
Phenotypic Characters ◽  
Corchorus Capsularis ◽  
Fiber Traits ◽  
Stem Colour ◽  
Range Of Variation

Twenty-two morpho-agronomic traits of 42 jute genotypes, including 4 varieties with 38 accessions of C. capsularis were evaluated to assess the extent and patterns of variability and their relationships. Seed traits exhibited a wider range of variation than fiber traits. Qualitative traits were also the most informative. Considerable ranges of variability were observed in stem colour, petiole colour, stipule colour, plant technical height, base diameter, dry fibre weight and dry stick weight. Based on major yield contributing characters’ accessions 628, 633, 635 and 646 performed better in most of the cases than the control variety   CVL-1, CVE-3, BJC-7370 and BJC-83. Progressive Agriculture 31 (1): 10-18, 2020

scholarly journals Morphological and agronomical characterization and estimates of genetic parameters of sesbania Scop. (Leguminosae) accessions

1999 ◽  
Vol 22 (1) ◽  
pp. 81-93 ◽  
Author(s):  
E.A. Veasey ◽  
E.A. Schammass ◽  
R. Vencovsky ◽  
P.S. Martins ◽  
G. Bandel
Keyword(s):  
Genetic Variability ◽  
Genetic Parameters ◽  
Block Design ◽  
Soil Improvement ◽  
Morphological Characters ◽  
Wood Products ◽  
Agronomic Characters ◽  
Legume Plant ◽  
Biomass Yields ◽  
Superior Genotypes

Twenty-two accessions of seven Sesbania (Leguminosae) species: S. emerus, S. rostrata, S. tetraptera, S. exasperata (annuals), S. grandiflora, S. sesban and S. virgata (perennials), used for ruminant fodder, firewood, wood products, soil improvement, and human food, were investigated, with the aim of characterizing both inter- and intraspecific genetic variability, estimating genetic parameters for the characters evaluated and appraising the forage potential of the accessions. These were planted at the Instituto de Zootecnia, Nova Odessa, SP, Brazil, in a randomized complete block design with 22 treatments and four replications. Seventeen morphological and 17 agronomic characters were evaluated. Genetic parameters coefficient of intraspecific genetic diversity (bi) and coefficient of intraspecific genetic variation (CVgi) were obtained for the species represented by more than one accession. Highly significant differences were observed among as well as within species for most characters, showing considerable genetic variability. S. exasperata showed intraspecific genetic variability for the largest number of morphological characters. The same was observed for S. sesban for the agronomic characters. Most of the characters gave high bi values, above 0.80, indicating the possibility of selecting superior genotypes. The CVgi values, on the other hand, which indicate the magnitude of the existing genetic variability relative to the character mean, varied according to the species and character evaluated. Differences between annual and perennial species were observed, with higher biomass yields presented by the annuals at the first cut and by the perennials after the second cut, reaching the highest yield at the third cut. The annual species had higher seed production. Accession NO 934 of S. sesban gave the highest biomass yields and regrowth vigor, showing promise as a forage legume plant.

scholarly journals Recurrent selection in inbred popcorn families

2004 ◽  
Vol 61 (6) ◽  
pp. 609-614 ◽  
Author(s):  
Máskio Daros ◽  
Antônio Teixeira do Amaral Jr. ◽  
Messias Gonzaga Pereira ◽  
Fabrício Santana Santos ◽  
Ana Paula Cândido Gabriel ◽  
...  
Keyword(s):  
Genetic Variability ◽  
Recurrent Selection ◽  
Agronomic Traits ◽  
Block Design ◽  
Genotype By Environment Interaction ◽  
Small Scale ◽  
Environment Interaction ◽  
Genotype By Environment ◽  
Randomized Complete Block Design ◽  
Superior Genotypes

Although much appreciated in Brazil, commercial popcorn is currently cropped on a fairly small scale. A number of problems need to be solved to increase production, notably the obtaintion of seeds with good agronomic traits and good culinary characteristics. With the objective of developing superior genotypes in popcorn, a second cycle of intrapopulation recurrent selection based on inbred S1 families was carried out. From the first cycle of selection over the UNB-2U population, 222 S1 families were obtained, which were then divided into six sets and evaluated in a randomized complete block design with two replications within the sets. Experiments were carried out in two Brazilian localities. The analysis of variance revealed environmental effects for all evaluated traits, except popping and stand, showing that, for most traits, these environments affected genotype behavior in different ways. In addition, the set as source of variation was significant for most of the evaluated traits, indicating that dividing the families into sets was an efficient strategy. Genotype-by-environment interaction was detected for most traits, except popping expansion and stand. Differences among genotypes were also detected (1% F-test), making viable the proposition of using the genetic variability in the popcorn population as a basis for future recurrent selection cycles. Superior families were selected using the Smith and Hazel classic index, with predicted genetic gains of 17.8% for popping expansion and 26.95% for yield.

scholarly journals Variability, heritability and association analysis in plant traits of swiss chard (Beta vulgaris subsp. cicla)

Genetika ◽  
2011 ◽  
Vol 43 (2) ◽  
pp. 239-252 ◽  
Author(s):  
Dursun Eşiyok ◽  
Kadri Bozokalfa ◽  
Tansel Kaygisiz-Aşçioğul
Keyword(s):  
Genetic Variability ◽  
Correlation Coefficient ◽  
Coefficient Of Variation ◽  
Agronomic Traits ◽  
Plant Traits ◽  
Total Yield ◽  
Phenotypic Correlation ◽  
Agronomic Characters ◽  
Swiss Chard ◽  
Essential Contribution

Plant breeders mainly interested in improvement agronomic properties of desirable trait accompanied with genetic architecture of major characters and their interrelationship. Genetic variability and character association are prime importance and provide essential contribution for successful breeding programme. In the present research genetic variability, heritability, phenotypic and genotypic correlations of several agronomic characters were studied in fifty-four swiss chard accessions and cultivars. Analysis of variance observed highly significant variations among accessions, and phenotypic coefficient of variation (PCV) was higher magnitude of genotypic coefficient of variation (GCV) for all agronomic characters. The lamina length, lamina width, petiole thickness, petiole width, lightness, chroma and leaf dry matter observed high magnitude broad sense heritable characters accompanied with high genetic advance. Genotypic correlation coefficient showed higher than phenotypic correlation coefficient which could be explained by low environmental effect on investigated agronomic traits. Positive correlation was revealed between petiole length, lamina length, lamina width, petiole thickness and petiole width which comprise total yield in swiss chard.

scholarly journals AGRO-MORPHOLOGICAL CHARACTERIZATION AND GENETIC DIVERSITY OF GUARANA CULTIVARS

2019 ◽  
Vol 94 (3) ◽  
pp. 166
Author(s):  
Pablo Roberto da Silva Ozorio ◽  
André Luiz Atroch ◽  
Firmino José do Nascimento Filho
Keyword(s):  
Genetic Diversity ◽  
Genetic Variability ◽  
Morphological Traits ◽  
Agronomic Traits ◽  
Morphological Characterization ◽  
High Variability ◽  
Great Variability ◽  
Breeding Programs ◽  
High Genetic Variability ◽  
Superior Genotypes

Based on agro-morphological traits, this study aimed to describe and quantify the genetic diversity between eighteen guarana cultivars from the guarana breeding program, to identify cultivars for use in multiple-purpose in breeding programs to obtain segregating populations with great variability and diversity. Dis-similarity between cultivars was calculated using Gower’s algorithm and a dendrogram was obtained using the UPGMA algorithm. High genetic variability and diversity was identified between guarana cultivars via 20 morpho-agronomic traits. Two groups and six subgroups of genetic diversity were identified. Crosses between clones of different subgroups may produce high variability and diversity in segregating populations, increasing the capacity to select for superior genotypes in these populations.

scholarly journals Identification of the Optimum Environments for the High Yield and Quality Traits of Lentil Genotypes Evaluated in Multi-Location Trials

2021 ◽  
Vol 13 (15) ◽  
pp. 8247
Author(s):  
Dimitrios N. Vlachostergios ◽  
Christos Noulas ◽  
Anastasia Kargiotidou ◽  
Dimitrios Baxevanos ◽  
Evangelia Tigka ◽  
...  
Keyword(s):  
Crude Protein ◽  
Agronomic Traits ◽  
High Yield ◽  
Breeding Programs ◽  
Growing Seasons ◽  
Yield And Quality ◽  
Food And Feed ◽  
Superior Genotypes ◽  
Selection Of ◽  
The Ideal

Lentil is a versatile and profitable pulse crop with high nutritional food and feed values. The objectives of the study were to determine suitable locations for high yield and quality in terms of production and/or breeding, and to identify promising genotypes. For this reason, five lentil genotypes were evaluated in a multi-location network consisting of ten diverse sites for two consecutive growing seasons, for seed yield (SY), other agronomic traits, crude protein (CP), cooking time (CT) and crude protein yield (CPY). A significant diversification and specialization of the locations was identified with regards to SY, CP, CT and CPY. Different locations showed optimal values for each trait. Locations E4 and E3, followed by E10, were “ideal” for SY; locations E1, E3 and E7 were ideal for high CP; and the “ideal” locations for CT were E3 and E5, followed by E2. Therefore, the scope of the cultivation determined the optimum locations for lentil cultivation. The GGE-biplot analysis revealed different discriminating abilities and representativeness among the locations for the identification of the most productive and stable genotypes. Location E3 (Orestiada, Region of Thrace) was recognized as being optimal for lentil breeding, as it was the “ideal” or close to “ideal” for the selection of superior genotypes for SY, CP, CT and CPY. Adaptable genotypes (cv. Dimitra, Samos) showed a high SY along with excellent values for CP, CT and CPY, and are suggested either for cultivation in many regions or to be exploited in breeding programs.

scholarly journals Effect of Nitrogen Fertilizer on some Attributes of SorghumGrown in Saline Soil under Irrigation

2018 ◽  
Vol 1 (2) ◽  
pp. 12-17
Author(s):  
Abubaker Haroun M.Adam ◽  
Mohammed Ahmed Taleim
Keyword(s):  
Nitrogen Fertilizer ◽  
Cultural Practices ◽  
Agronomic Traits ◽  
Optimal Level ◽  
Agronomic Characters ◽  
College Of Agriculture ◽  
Nitrogen Levels ◽  
Significant Difference ◽  
Number Of Leaves ◽  
Sorghum Bicolor L

The main objective of this study was to investigate the effects of 4 levels of Nitrogen (N) fertilizer (0, 25, 50 and 75 Kg N/fed) on some attributes of Sorghum (Sorghum bicolor L). This study was conducted in the farm of College of Agriculture, University of Bahri-Sudan; during the period 2014-2015. Where the soil is classified as saline with pH ranging from 7.5 -7.8. A randomized completely block designed (RCBD); with 3 replications and four (4) treatments was adopted. All recommended cultural practices were carried out timely. Data; pertaining some plant attributes were collected and analyzed. The result showed that the application of 75KgN/fed has increased both; the average number of leaves as well as the plant height compared to other levels of Nitrogen fertilizer including the control (Figure 1, Figure 2). For the average number of tillers concern, there is non -significant difference between all Nitrogen levels and average number of tillers (Figure 3). The study concluded that the Nitrogen fertilizer has variable effects on the studied agronomic characters, and the application of 75kgN/fed is the optimal level of fertilizer for improving the agronomic traits of Sorghum under Alkadaro conditions.

scholarly journals Evaluating the genetic variability of rubber hybrid progenies of the two crosses PB260 x RO44/71 and PB260 x RO62/54 by RAPD technique

2019 ◽  
Vol 2 (3) ◽  
pp. 36-43
Author(s):  
Thien Minh Nguyen ◽  
Tien Thi My Pham
Keyword(s):  
Genetic Variation ◽  
Genetic Variability ◽  
Genetic Similarity ◽  
Field Experiments ◽  
Agronomic Traits ◽  
Genetic Relationships ◽  
Genetic Material ◽  
Population Based ◽  
Shannon Index ◽  
Polymorphic Bands

The agronomic values of this population have been evaluated in the field experiments based on their phenotypic performance of agronomic traits, but the genetic variability of this population needs to be evaluated via techniques based on genetic material - DNA. In this study, the genetic variability in the investigated population of 71 hybrids and their parents was evaluated by RAPD technique, using eight selected arbitrarily primers; Genetic parameters and dendrogram expressing the genetic relationships among the investigated population were analyzed by GenALEx 6.1, Popgene 1.31 and NTSYSpc 2.1 softwares. Eight primers were used to generate the amplify products on each individual in the investigated population. From 74 genotypes, a total of 109 fragments were generated, among which, there were 89 polymorphic bands representing 81.65% with an average of 11 polymorphic bands/primer. Genetic similarity coefficient among the investigated population, based on DICE coefficient, ranged from 0.560 (LH05/0822 and PB260) to 0.991 (LH05/0781 and LH05/0841) with an average of 0,796, meaning that the genetic distance among ranged from 0.009 to 0.440 with an average of 0.231. The Shannon index and mean heterozygosity values were 0.328 and 0,176, respectively. This indicated that the progenies of the two investigated crosses possessed a relatively high range of genetic variability. The analysis of molecular variance (AMOVA) showed that genetic variation within population represented 62%, while genetic variation among two different crosses contributes 38% to the total genetic variability. Dendrogram based on DICE’s genetic similarity using UPGMA method showed that the hybrids divide into two major genetic groups (0.75), but the crosses were scattered independently of the hybrid.

scholarly journals Selección para calidad fisiológica de la semilla y rendimiento en líneas S2 derivadas de cuatro poblaciones tropicales de maíz (Zea mays L.)

2016 ◽  
Vol 7 (1) ◽  
pp. 58
Author(s):  
Enrique Navarro ◽  
Cristina Vega ◽  
Fernando Narváez ◽  
Hugo Córdova
Keyword(s):  
Genetic Variability ◽  
Grain Yield ◽  
Recurrent Selection ◽  
Zea Mays L ◽  
Agronomic Traits ◽  
Reciprocal Recurrent Selection ◽  
Laboratory Conditions ◽  
Flower Plant ◽  
Ear Height ◽  
Field And Laboratory Conditions

This study was carried out in 1993 to evaluate S2 lines from four maize tropical populations improved by reciprocal recurrent selection. These lines were evaluated under field and laboratory conditions, the latter one to determine physiology quality. The main goal was to measure genetic variability within and among populations for traits such as grain yield, vigor and germination and to select the best lines under field and laboratory conditions. The combined analysis of variance showed great genetic variability among the S2 lines within and among populations for grain yield, days to flower, plant and ear height, among others. The maximum genetic variability was observed on the lines from population 43 and pool 23 for most of the traits, although the latter showed a greater genetic variability for grain yield. Besides, it is important to mention that the above populations included the best genotypes for grain yield, germination and vigor. Taking into account the above mentionel agronomic traits, fifteen lines were selected; 2 belong to population 43* pool 20, 2 from pool 19* pool 23, 8 from population 43, and 3 from pool 23. These results confirm the genetic superiority of the lines from populations 43 and pool 23, so that these populations should be recommended for future genetic improvement by reciprocal recurrent procedures.

Sign in / Sign up

Export Citation Format

Share Document