scholarly journals Experimental Study of the Performance of Base Metal and Welding Line of the Household LPG Cylinder Manufactured in Kurdistan Region

2020 ◽  
Vol 4 (3) ◽  
pp. 116-123
Author(s):  
Yassin Mustafa Ahmed ◽  
Hameed D. Lafta ◽  
A. A. Abdul Rahman ◽  
Barzan Talib Salih
Keyword(s):  
Base Metal ◽  
Hardness Test ◽  
Bending Test ◽  
Chemical Compositions ◽  
Kurdistan Region ◽  
Liquefied Petroleum Gas ◽  
Three Samples ◽  
Compliance Requirements ◽  
Welding Line ◽  
And Performance

Liquefied petroleum gas (propane or butane) is a colourless liquid which readily evaporates into a gas. It has no smell, although it will normally have an odour added to help detect leaks. Liquefied petroleum gas is stored and handled as a liquid when under pressure inside an LPG cylinder. Liquefied petroleum gas cylinders are subjected to various tests to ensure their compliance requirements as per standard. This research studied the durability of welding and performance of base metal of LPG home cylindrical in Kurdistan region. The experiments were carried out on an unformed plate and three types of LPG cylinder designated as A, B, and C and D. In this research standard tests for LPG cylinders were conducted. Three samples were extracted from each of LPG cylinders and unformed plate for each of tensile test, bending test and hardness test according to ISO 6892-2016 and ASME standards to examine the mechanical properties. In addition, chemical compositions also were carried out. These values are compared with standard.

scholarly journals Experimental study of the performance of base metal and welding line of the household LPG cylinders manufactured in Kurdistan region

ACC Journal ◽  
2020 ◽  
Vol 26 (1) ◽  
pp. 7-18
Author(s):  
Yassin Mustafa Ahmed ◽  
Hameed D. Lafta ◽  
Azhin Abdullah Abdulrahman ◽  
Barzan Talib Salih
Keyword(s):  
Experimental Study ◽  
Base Metal ◽  
Kurdistan Region ◽  
Welding Line

The Relation Between Financial Incentives, Motivation, and Performance

2017 ◽  
Vol 16 (2) ◽  
pp. 61-76 ◽  
Author(s):  
Anaïs Thibault Landry ◽  
Marylène Gagné ◽  
Jacques Forest ◽  
Sylvie Guerrero ◽  
Michel Séguin ◽  
...  
Keyword(s):  
Financial Incentives ◽  
Work Performance ◽  
Autonomous Motivation ◽  
Compensation Plans ◽  
Work Settings ◽  
Path Analyses ◽  
Three Samples ◽  
And Performance ◽  
Performance Results

Abstract. To this day, researchers are debating the adequacy of using financial incentives to bolster performance in work settings. Our goal was to contribute to current understanding by considering the moderating role of distributive justice in the relation between financial incentives, motivation, and performance. Based on self-determination theory, we hypothesized that when bonuses are fairly distributed, using financial incentives makes employees feel more competent and autonomous, which in turn fosters greater autonomous motivation and lower controlled motivation, and better work performance. Results from path analyses in three samples supported our hypotheses, suggesting that the effect of financial incentives is contextual, and that compensation plans using financial incentives and bonuses can be effective when properly managed.

scholarly journals Digitally Patterned Mesoporous Carbon Nanostructures of Colorless Polyimide for Transparent and Flexible Micro-Supercapacitor

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2547
Author(s):  
Hyeonwoo Kim ◽  
Suwon Hwang ◽  
Taeseung Hwang ◽  
Jung Bin In ◽  
Junyeob Yeo
Keyword(s):  
Carbon Nanostructures ◽  
Specific Area ◽  
Bending Test ◽  
Chemical Compositions ◽  
Carbon Structure ◽  
Carbon Structures ◽  
Direct Laser ◽  
Mechanical Bending ◽  
Minimal Reduction ◽  
High Flexibility

Here, we demonstrate the fabrication of a flexible and transparent micro-supercapacitor (MSC), using colorless polyimide (CPI) via a direct laser writing carbonization (DLWC) process. The focused laser beam directly carbonizes the CPI substrate and generates a porous carbon structure on the surface of the CPI substrate. Fluorine, which is one of the chemical compositions of CPI, can enhance the specific area and the conductivity of the carbon electrode by creating micropores in carbon structures during carbonization. Thus, the fabricated carbonized CPI-based MSC shows enhanced specific capacitance (1.20 mF at 10 mV s−1) and better transmittance (44.9%) compared to the conventional PI-based MSC. Additionally, the fabricated carbonized CPI-based MSC shows excellent cyclic performance with minimal reduction (<~10%) in 3000 cycles and high capacitance retention under mechanical bending test conditions. Due to its high flexibility, transparency, and capacitance, we expect that carbonized CPI-based MSC can be further applied to various flexible and transparent applications.

scholarly journals Increasing of the Mechanical Properties of Friction Stir Welded Joints of 6061 Aluminum Alloy by Introducing Alumina Particles

2017 ◽  
Vol 17 (2) ◽  
pp. 29-40 ◽  
Author(s):  
M. A. Tashkandi ◽  
J. A. Al-Jarrah ◽  
M. Ibrahim
Keyword(s):  
Aluminum Alloy ◽  
Base Metal ◽  
Welded Joints ◽  
Volume Fraction ◽  
Welding Process ◽  
Welding Zone ◽  
6061 Aluminum Alloy ◽  
Friction Stir ◽  
Alumina Particles ◽  
Welding Line

AbstractThe main aim of this investigation is to produce a welding joint of higher strength than that of base metals. Composite welded joints were produced by friction stir welding process. 6061 aluminum alloy was used as a base metal and alumina particles added to welding zone to form metal matrix composites. The volume fraction of alumina particles incorporated in this study were 2, 4, 6, 8 and 10 vol% were added on both sides of welding line. Also, the alumina particles were pre-mixed with magnesium particles prior being added to the welding zone. Magnesium particles were used to enhance the bonding between the alumina particles and the matrix of 6061 aluminum alloy. Friction stir welded joints containing alumina particles were successfully obtained and it was observed that the strength of these joints was better than that of base metal. Experimental results showed that incorporating volume fraction of alumina particles up to 6 vol% into the welding zone led to higher strength of the composite welded joints as compared to plain welded joints.

scholarly journals Effect of microwave disinfection on physical and mechanical properties of acrylic resins

2008 ◽  
Vol 19 (4) ◽  
pp. 348-353 ◽  
Author(s):  
Rafael Leonardo Xediek Consant ◽  
Erica Brenoe Vieira ◽  
Marcelo Ferraz Mesquita ◽  
Wilson Batista Mendes ◽  
João Neudenir Arioli-Filho
Keyword(s):  
Flexural Strength ◽  
Room Temperature ◽  
Physical And Mechanical Properties ◽  
Hardness Test ◽  
Knoop Hardness ◽  
Microwave Energy ◽  
Bending Test ◽  
Acrylic Resins ◽  
Strength Tests ◽  
The Impact

This study evaluated the effect of microwave energy on the hardness, impact strength and flexural strength of the Clássico, Onda-Cryl and QC-20 acrylic resins. Aluminum die were embedded in metallic or plastic flasks with type III dental stone, in accordance with the traditional packing technique. A mixing powder/liquid ratio was used according to the manufacturer's instructions. After polymerization in water batch at 74ºC for 9 h, boiling water for 20 min or microwave energy at 900 W for 10 min, the specimens were deflasked after flask cooling at room temperature, and submitted to finishing. Specimens non-disinfected and disinfected by microwave irradiation were submitted to hardness, impact and flexural strength tests. Each specimen was immersed in distilled water and disinfected in a microwave oven calibrated to 650 W for 3 min. Knoop hardness test was performed with 25 g load for 10 s, impact test was carried out using the Charpy system with 40 kpcm, and 3-point bending test with a crosshead speed of 0.5 mm/min until fracture. Data were submitted to statistical analysis by ANOVA and Tukey's test (?=0.05). Disinfection by microwave energy decreased the hardness of Clássico and Onda-Cryl acrylic resins, but no effect was observed on the impact and flexural strength of all tested resins.

scholarly journals Mycoflora and Incidence of Aflatoxin in Wheat Seeds from Duhok Province, Kurdistan Region of Iraq

2018 ◽  
Vol 6 (3) ◽  
pp. 78-81 ◽  
Author(s):  
Lina F. Bazyani ◽  
Asia A.M. Saadullah
Keyword(s):  
Aflatoxin Production ◽  
Distinct Species ◽  
Kurdistan Region ◽  
Elisa Method ◽  
Production Potential ◽  
Potential Production ◽  
Three Samples ◽  
Identification Of Fungi ◽  
Different Sources ◽  
Isolated Species

Identification of fungi that contaminated wheat grains and their aflatoxins production were investigated in Thirty-three samples collected from different sources in Duhok province, Kurdistan region of Iraq during 2014-2015. In this study a total of twenty-five species belonged to 12 genera was isolated and identified on DRBC, MEA and PDA media. Nine distinct species were identified within Aspergillus which revealed highest diversity among all isolated genera. Followed by five species of Penicillium.Alternariacame after which showed only two species. Two teleomorphic ascomycota  Emericella, and Eurotiumwere recorded. The results showed that A. nigerand A. flavuswere the most isolated species. Aflatoxin production potential detected by A. flavusand A. parasiticus were screened using ELISA method. Aflatoxin potential detected in culture of Aspergillus flavus isolates was ranged from 57 to 310 ppb, while, the potential production aflatoxin for A. parasiticus isolates were ranged from 189 – 450 part per billion.

scholarly journals Utilization of rapid prototyping technology for the fabrication of an orthopedic shoe inserts for foot pain reprieve using thermo-softening viscoelastic polymers: A novel experimental approach

2020 ◽  
Vol 53 (3-4) ◽  
pp. 519-530
Author(s):  
Shubham Sharma ◽  
Jujhar Singh ◽  
Harish Kumar ◽  
Abhinav Sharma ◽  
Vivek Aggarwal ◽  
...  
Keyword(s):  
Rapid Prototyping ◽  
Thermoplastic Polyurethane ◽  
Research Work ◽  
Testing Machine ◽  
Three Dimensional ◽  
Hardness Test ◽  
Thermoplastic Elastomer ◽  
Bending Test ◽  
Foot Orthosis ◽  
Orthotic Insoles

This research work has been completed by concentrating on the structure of inserts for foot orthosis fabricated by utilizing rapid prototyping technology. Thermoplastic elastomer and thermoplastic polyurethane are the most commonly used materials that are being used in customized three-dimensional printed orthotic insoles, which are comfortable and prevent the user in many foot disorders. Thermo-softening viscoelastic polymers, explicitly Filaflex and Ninjaflex, have been printed by utilizing Flash Forge three-dimensional printers to evaluate the mechanical properties of specimens with alterations of the percentage rate fill-up design replicas. The results are compared on the basis of hardness test, flexural/bending test, and tensile test using Durometer and Universal Testing Machine (UTM). It has also been observed that the most significant effecting factor is infill density.

scholarly journals The Impact of Entrepreneurial Orientation on Spin-Offs’ Performance: A Cross-Cultural Study

SAGE Open ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 215824401986581 ◽  
Author(s):  
Mariem Khadhraoui ◽  
Michel Plaisent ◽  
Lassaad Lakhal ◽  
Bernard Prosper
Keyword(s):  
Social Sciences ◽  
Least Squares ◽  
Cultural Study ◽  
Entrepreneurial Orientation ◽  
Cross Cultural ◽  
Cross Cultural Study ◽  
Three Samples ◽  
And Performance ◽  
The Impact ◽  
The Relationship

Previous studies considered entrepreneurial orientation as a determinant of firms’ growth and performance. In this research, we are interested in spin-offs. Indeed, we aim to study the relationship between their entrepreneurial orientation and their performance. Therefore, we carried out a cross-cultural study in three different countries; Tunisia, Canada, and Morocco. We opted for a personal survey. We addressed our questionnaire to 180 managers of spin-offs and we analyzed the research variables using SPSS 20.00 (Statistical Packages for Social Sciences) and Smart PLS 3 (Partial Least Squares). Our findings highlight a positive correlation between entrepreneurial orientation and performance of spin-offs within the three samples.

scholarly journals Effect of Gamma Radiation and Endodontic Treatment on Mechanical Properties of Human and Bovine Root Dentin

2016 ◽  
Vol 27 (6) ◽  
pp. 670-674 ◽  
Author(s):  
Veridiana Resende Novais ◽  
Priscilla Barbosa Ferreira Soares ◽  
Carlla Martins Guimarães ◽  
Laís Rani Sales Oliveira Schliebe ◽  
Stella Sueli Lourenço Braga ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Gamma Radiation ◽  
Hardness Test ◽  
Knoop Hardness ◽  
Endodontic Treatment ◽  
Bending Test ◽  
Human Teeth ◽  
Significant Difference ◽  
Root Dentin

Abstract This study evaluated the effect of gamma radiation and endodontic treatment on the microhardness and flexural strength of human and bovine root dentin. Forty single-rooted human teeth and forty bovine incisor teeth were collected, cleaned and stored in distilled water at 4 °C. The human and bovine teeth were divided into 4 groups (n=10) resulting from the combination of two study factors: first, regarding the endodontic treatment in 2 levels: with or without endodontic treatment; and second, radiotherapy in two levels: with or without radiotherapy by 60 Gy of Co-60 gamma radiation fractioned into 2 Gy daily doses five days per week. Each tooth was longitudinally sectioned in two parts; one-half was used for the three-point bending test and the other for the Knoop hardness test (KHN). Data were analyzed by 3-way ANOVA and Tukey HSD test (α=0.05). No significant difference was found for flexural strength values. The human dentin had significantly higher KHN than the bovine. The endodontic treatment and radiotherapy resulted in significantly lower KHN irrespective of tooth origin. The results indicated that the radiotherapy had deleterious effects on the microhardness of human and bovine dentin and this effect is increased by the interaction with endodontic therapy. The endodontic treatment adds additional negative effect on the mechanical properties of radiated tooth dentin; the restorative protocols should be designed taking into account this effect.

The Welding Residual Stress Analysis on High Performance Bridge Steel with Different Testing Method

2014 ◽  
Vol 989-994 ◽  
pp. 883-886
Author(s):  
Huan Xue ◽  
Rong Feng Li ◽  
Li Yu ◽  
Dong Liu ◽  
Wen Jie Peng
Keyword(s):  
Residual Stress ◽  
Base Metal ◽  
High Performance ◽  
Hole Drilling ◽  
Indentation Method ◽  
X Ray ◽  
Hole Drilling Method ◽  
Bridge Steel ◽  
Drilling Method ◽  
Welding Line

The residual stress on X groove welding plate of high performance bridge steel 4MnNbq is analyzed. The X-ray diffraction method, hole drilling method and indentation method are respectively used to test the residual stress on welding line, heat-affected zone and base metal. The longitudinal and transversal residual stress are analyzed and compared. The results show that the stress along welding line direction is far larger than the transversal one and the stress on base metal are comparatively smaller than the welding line. The testing results of three methods match well, while the results of X-ray method and hole drilling method are much closer, the relative error of indentation method is comparatively larger.

Sign in / Sign up

Export Citation Format

Share Document