scholarly journals Effect of PWHT on Laser-Welded Duplex Stainless Steel

2020 ◽  
Vol 99 (7) ◽  
pp. 185s-202s ◽  
Author(s):  
APARECIDA SILVA MAGALHÃES ◽  
◽  
CHARLES HENRIQUE XAVIER MORAIS MAGALHÃES ◽  
LEONARDO BARBOSA GODEFROID ◽  
GERALDO LÚCIO DE FARIA ◽  
...  
Keyword(s):  
Laser Welding ◽  
Welded Joints ◽  
Tensile Tests ◽  
Heat Treatments ◽  
Corrosion Properties ◽  
Welding Condition ◽  
Heat Treated ◽  
Different Temperatures ◽  
Isothermal Heat Treatments ◽  
Pulp And Paper Industries

The welded joints of duplex stainless steels (DSSs) have been widely used in petrochemical, nuclear, pulp, and paper industries. Welds require a good, superficial finishing and a combination of mechanical and corrosion properties in these types of high-quality, demanding applications. Even though laser welding promotes narrow weld beads and a small heat-affected zone, when it is applied to DSSs, it can produce dangerous microstructural discontinuities. In this context, the effects of subsequent heat treatments on the microstructure, corrosion resistance, microhardness, and tensile proper-ties of DSS laser-welded joints are investigated. In this study, samples of UNS S32304 DSS were submitted to two different conditions of laser welding. Subsequently, the plates submitted to the best welding condition were subjected to isothermal heat treatments at different temperatures (850°, 950°, 1050°, and 1150°C) for 10 min. Then they were microstructurally characterized. Phase fraction measurements and microhardness tests were performed. Based on the obtained results, postweld heat-treated samples at 1150°C, which is the best condition, were subjected to corrosion and tensile tests. It was possible to conclude the corrosion prop-erties of the welded joint were significantly improved after the heat treatment. However, the mechanical behavior was strongly influenced by the presence of volumetric discontinuities and intermetallic compounds, which considerably deteriorated the mechanical strength of the material.

scholarly journals Performance of Thermo-Mechanically Processed AA7075 Alloy at Elevated Temperatures—From Microstructure to Mechanical Properties

Metals ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 884 ◽  
Author(s):  
Seyed Vahid Sajadifar ◽  
Emad Scharifi ◽  
Ursula Weidig ◽  
Kurt Steinhoff ◽  
Thomas Niendorf
Keyword(s):  
Mechanical Properties ◽  
Elevated Temperatures ◽  
Tensile Tests ◽  
Uniaxial Tensile ◽  
Forming Process ◽  
Softening Mechanism ◽  
Rate Dependent ◽  
Heat Treated ◽  
Different Temperatures ◽  
Die Forming

This study focuses on the high temperature characteristics of thermo-mechanically processed AA7075 alloy. An integrated die forming process that combines solution heat treatment and hot forming at different temperatures was employed to process the AA7075 alloy. Low die temperature resulted in the fabrication of parts with higher strength, similar to that of T6 condition, while forming this alloy in the hot die led to the fabrication of more ductile parts. Isothermal uniaxial tensile tests in the temperature range of 200–400 °C and at strain rates ranging from 0.001–0.1 s−1 were performed on the as-received material, and on both the solution heat-treated and the thermo-mechanically processed parts to explore the impacts of deformation parameters on the mechanical behavior at elevated temperatures. Flow stress levels of AA7075 alloy in all processing states were shown to be strongly temperature- and strain-rate dependent. Results imply that thermo-mechanical parameters are very influential on the mechanical properties of the AA7075 alloy formed at elevated temperatures. Microstructural studies were conducted by utilizing optical microscopy and a scanning electron microscope to reveal the dominant softening mechanism and the level of grain growth at elevated temperatures.

Effect of Heat Treatments on Microstructure and Mechanical Properties of Low Carbon Steel Pipes Welded by Induction Process

2014 ◽  
Vol 887-888 ◽  
pp. 1301-1306
Author(s):  
Zakaria Boumerzoug ◽  
Lakhdar Lakhdari
Keyword(s):  
Mechanical Properties ◽  
Isothermal Annealing ◽  
Pipeline Steel ◽  
Low Carbon Steel ◽  
Tensile Tests ◽  
Heat Treatments ◽  
Low Carbon ◽  
Steel Pipes ◽  
Induction Process ◽  
Isothermal Heat Treatments

In this work, the effect of isothermal heat treatments on microstructure evolution and mechanical properties after welding by induction of A37 pipeline steel have been studied by scanning electron microscopy, hardness measurements, and tensile tests. Microstructural evolution in welded joint was identified after isothermal annealing from 200 until 900 °C.

scholarly journals Influence of Laser-Welding on Microstructure and Corrosion Properties of Twinning-Induced Plasticity (TWIP) Steel

Materials ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 4315 ◽  
Author(s):  
Chengcheng Xu ◽  
Youkang Zhang ◽  
Wanlei Liu ◽  
Ying Jin ◽  
Lei Wen ◽  
...  
Keyword(s):  
Laser Welding ◽  
Welding Speed ◽  
Welded Joints ◽  
Twip Steel ◽  
Coincidence Site Lattice ◽  
Kelvin Probe ◽  
Electron Backscattered Diffraction ◽  
Corrosion Properties ◽  
Superior Corrosion Resistance ◽  
Mechanical Properties And Corrosion

The effect of welding speed on microstructure, mechanical properties, and corrosion properties of laser-assisted welded joints of a twinning-induced plasticity (TWIP) steel was investigated by using X-ray diffraction (XRD), scanning electron microscopy (SEM), electron backscattered diffraction (EBSD) analysis, electrochemical test, and micro-area scanning Kelvin probe test (SKP). The results reveal that the welded joints, with a fully austenitic structure, are obtained by laser welding. In addition, the preferred orientation of grains in fusion zone (FZ) increased with the increase of welding speed. Additionally, the coincidence site lattice (CSL) grain boundaries of FZ decreased with increasing welding speed. However, potentiodynamic polarization and SKP results demonstrated that the welding speed of 1.5 m/min renders superior corrosion resistance. It can also be inferred that the corrosion properties of the welded joints are related to the grain size and frequency of CSL grain boundary in FZ.

Laser Welded Joints of High-Nitrogen Austenitic Steels: Microstructure and Properties

2018 ◽  
Vol 284 ◽  
pp. 344-350 ◽  
Author(s):  
Vera V. Berezovskaya ◽  
A.V. Berezovskiy ◽  
D.H. Hilfi
Keyword(s):  
Welded Joints ◽  
Carbon Dioxide Laser ◽  
Continuous Wave ◽  
High Strength ◽  
Tensile Tests ◽  
Wave Mode ◽  
Austenitic Steels ◽  
Maximum Output ◽  
High Nitrogen ◽  
Corrosion Properties

High nitrogen austenitic steels are used as structural materials required possessing high strength and fracture toughness. The present study is concerned with the characteristic features (shape, size, properties and structure) of the laser welded joints in Cr-Mn-, Cr-Mn-Mo-high nitrogen steels compared to the ones of Cr-Ni-steel joint. Butt welded joints were made using carbon dioxide laser with a maximum output of 5 kW in the continuous wave mode. The hardness and tensile tests of welded joints in the air and 3.5 vol.%-solution of NaCl, as well as the theoretical studies were carried out by optical and transmission electron microscopy (TEM). The results are achieved by testing that the welded joints of HNS had satisfactory weldability, adequately high mechanical and corrosion properties. The austenite of the investigated HNS retains high stability throughout the welding cycle.

Study on Mechanical Properties at High Temperatures and Microstructure of Mg-12Gd-3Y-0.5Zr Magnesium Alloy

2014 ◽  
Vol 997 ◽  
pp. 618-623 ◽  
Author(s):  
Tian Dong Cao ◽  
Xiao Ming Yang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Magnesium Alloy ◽  
High Temperatures ◽  
Tensile Tests ◽  
Strengthening Mechanism ◽  
Heat Treated ◽  
Different Temperatures ◽  
Solution Strengthening ◽  
Tension Compression Asymmetry

In this paper, tensile tests were carried out on the as-rolled and heat-treated Mg-12Gd-3Y-0.5Zr magnesium alloy at different temperatures. Tendency of tensile strength vs temperature was investigated and strengthening mechanism was discussed. It shows that both as-rolled and heat-treated Mg-12Gd-3Y-0.5Zr magnesium alloy have good mechanical properties at high temperatures. The reason why they have poor tension-compression asymmetry was discussed by their texture analysis. It is indicated that solution strengthening and precipitation strengthening were main strengthening mechanisam, and RE additons improve their thermal stability which lead to their high tensile strength at high temperatures.

Effect of laser welding speed on pore formation in AA 6061 T6 alloy

2020 ◽  
Vol 62 (10) ◽  
pp. 979-984
Author(s):  
Emine Gündoğdu İş ◽  
Erhan Akman ◽  
Muharrem Yilmaz ◽  
Polat Topuz
Keyword(s):  
Laser Welding ◽  
Welding Speed ◽  
Welded Joints ◽  
Pore Formation ◽  
Weld Seam ◽  
Welding Process ◽  
Tensile Tests ◽  
Fiber Laser Welding ◽  
Thick Plates ◽  
Hardness Tests

Abstract In this study, 6 mm thick plates of Al 6061 T6 alloy are joined by laser welding at four welding speeds (40 mm × s-1, 35 mm × s-1, 25 mm × s-1, and 20 mm × s-1). The welded joints are made using a 4000 W fiber laser welding machine. The effect of laser welding speed on the pores formed in the weld seam was investigated. In this manner, it was found that with a change in laser welding speed the amount of pores formed in the structure also changed. In addition, after the welding process, macroscopic examinations, tensile tests and the hardness tests were made. As a result of the experiments performed, it was determined that, the laser welding speed was highly effective for pore formation.

Effect of Heat Treatment Temperature on the Mechanical Properties of Custom-Made NiTi Closed Coil Springs

2020 ◽  
Vol 897 ◽  
pp. 35-40
Author(s):  
Thanate Assawakawintip ◽  
Rochaya Chintavalakorn ◽  
Peerapong Santiwong ◽  
Anak Khantachawana
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Heat Treatment Temperature ◽  
Tensile Tests ◽  
Treatment Temperature ◽  
Statistical Analyses ◽  
Outer Diameter ◽  
Heat Treated ◽  
Custom Made ◽  
Different Temperatures

To investigate the effects of different temperatures for heat treatment of custom-made NiTi closed coil springs. NiTi closed coil springs (50.8% Ni-49.2%Ti) were manually fabricated around a 0.9mm diameter mandrel and heat treated at temperatures of 400°C, 450°C, and 500°C for 20 minutes. The outer diameter of each specimen was measured to determine the effect of heat treatment temperature on spring geometry. Tensile tests were carried out to measure the force levels at 3, 6, 9, and 12 mm of spring extension. Non-parametric statistical analyses were done to assess and compare the effects of different temperatures of heat treatment on the custom-made orthodontic closed coil springs. Heat treatment at lower temperatures produced larger outer coil diameters than at higher temperatures. Raising the temperature of heat treatment produced significant increases in force levels by 13-18 g especially between 400°C and 500°C at spring extensions of 3, 6 and 9 mm. The highest superelastic ratio of 5.44 was found in the NiTi coil springs that were heat treatment at 500°C for 20 minutes which signifies superelastic tendencies. The mechanical properties of NiTi closed coil springs are influenced by the temperature of heat treatment. The NiTi closed coil springs that were heat treated at 500°C for 20 minutes produce appropriate force levels to display a superelastic tendency for orthodontic use.

A research on the effect of retrogression and re-aging heat treatment on hot tensile properties of AA7075 aluminum alloys

2021 ◽  
pp. 1-23
Author(s):  
Talha Sunar ◽  
Dursun Ozyurek
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Ductile Fracture ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Xrd Analysis ◽  
Tensile Tests ◽  
Heat Treatments ◽  
Tensile Behaviour ◽  
Heat Treated

Abstract Aluminium alloys are preferred in most industries due to the functional properties they provide. It is known that alloys that can be processed with heat treatments shows better mechanical properties. 7xxx series alloys can be processed vi heat treatments and are often used in environmental conditions such as extreme temperatures and corrosive environments. Corrosive sensitivities such as stress corrosion cracking (SCC) can be observed with the effect of working conditions. It is known that retrogression and re-aging (RRA) heat treatment provide corrosion resistance and decrease the SCC velocity. The purpose of this study is to examine the tensile behaviour of annealed and retrogression-re-aging (RRA) heat treated AA7075 alloys at elevated temperatures. The mechanical properties of the alloys were investigated by conducting tensile tests at room temperature (RT), 100, 200, and 300°C. Hardness tests were performed at room temperature on the samples which were taken from tensile test specimens after tensile tests. The potential effects of test temperature on mechanical and microstructural properties were examined. The annealed and RRA heat treated alloys were characterized by scanning electron microscope (SEM), and X-ray diffraction (XRD) analysis. As a result, an increase in strength and hardness of the RRA treated AA7075 alloys was observed. Ductility of the RRA alloy was lower compared to the annealed AA7075 alloy. Fracture surface examinations showed that there was a semi-ductile fracture below 200°C and ductile fracture at temperatures of 200 and 300°C. Ductility was observed to increase with increasing temperature.

Heat Treatment Influence on the Corrosion Resistance of a Cu-Al-Fe-Mn Bronze

2018 ◽  
Vol 69 (5) ◽  
pp. 1055-1059 ◽  
Author(s):  
Mariana Ciurdas ◽  
Ioana Arina Gherghescu ◽  
Sorin Ciuca ◽  
Alina Daniela Necsulescu ◽  
Cosmin Cotrut ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Structural Changes ◽  
Heating Temperature ◽  
Galvanic Corrosion ◽  
Cooling Water ◽  
Open Circuit ◽  
Water Quenching ◽  
Heat Treated ◽  
Different Temperatures

Aluminium bronzes are exhibiting good corrosion resistance in saline environments combined with high mechanical properties. Their corrosion resistance is obviously confered by the alloy chemical composition, but it can also be improved by heat treatment structural changes. In the present paper, five Cu-Al-Fe-Mn bronze samples were subjected to annealing heat treatments with furnace cooling, water quenching and water quenching followed by tempering at three different temperatures: 200, 400 and 550�C. The heating temperature on annealing and quenching was 900�C. The structure of the heat treated samples was studied by optical and scanning electron microscopy. Subsequently, the five samples were submitted to corrosion tests. The best resistance to galvanic corrosion was showed by the quenched sample, but it can be said that all samples are characterized by close values of open-circuit potentials and corrosion potentials. Concerning the susceptibility to other types of corrosion (selective leaching, pitting, crevice corrosion), the best corrosion resistant structure consists of a solid solution, g2 and k compounds, corresponding to the quenched and 550�C tempered sample.

scholarly journals Low-carbon cast microalloyed steel intercritically heat-treated at different temperatures: microstructure and mechanical properties

2021 ◽  
Vol 21 (2) ◽  
Author(s):  
Hadi Torkamani ◽  
Shahram Raygan ◽  
Carlos Garcia Mateo ◽  
Yahya Palizdar ◽  
Jafar Rassizadehghani ◽  
...  
Keyword(s):  
Carbon Content ◽  
Volume Fraction ◽  
Block Size ◽  
Tensile Tests ◽  
Total Elongation ◽  
Martensite Phase ◽  
Low Carbon ◽  
Steel Increase ◽  
Different Temperatures ◽  
The Impact

AbstractIn this study, dual-phase (DP, ferrite + martensite) microstructures were obtained by performing intercritical heat treatments (IHT) at 750 and 800 °C followed by quenching. Decreasing the IHT temperature from 800 to 750 °C leads to: (i) a decrease in the volume fraction of austenite (martensite after quenching) from 0.68 to 0.36; (ii) ~ 100 °C decrease in martensite start temperature (Ms), mainly due to the higher carbon content of austenite and its smaller grains at 750 °C; (iii) a reduction in the block size of martensite from 1.9 to 1.2 μm as measured by EBSD. Having a higher carbon content and a finer block size, the localized microhardness of martensite islands increases from 380 HV (800 °C) to 504 HV (750 °C). Moreover, despite the different volume fractions of martensite obtained in DP microstructures, the hardness of the steels remained unchanged by changing the IHT temperature (~ 234 to 238 HV). Applying lower IHT temperature (lower fraction of martensite), the impact energy even decreased from 12 to 9 J due to the brittleness of the martensite phase. The results of the tensile tests indicate that by increasing the IHT temperature, the yield and ultimate tensile strengths of the DP steel increase from 493 to 770 MPa, and from 908 to 1080 MPa, respectively, while the total elongation decreases from 9.8 to 4.5%. In contrast to the normalized sample, formation of martensite in the DP steels could eliminate the yield point phenomenon in the tensile curves, as it generates free dislocations in adjacent ferrite.

Sign in / Sign up

Export Citation Format

Share Document