Features of electromagnetic and noise environment in the workplace of the staff of MRI departments: problems of hygienic regulation and control

2020 ◽  
Vol 60 (9) ◽  
pp. 575-582
Author(s):  
Larisa V. Pokhodzey ◽  
Elena A. Rudneva ◽  
Yuriy P. Paltsev ◽  
Nikolay N. Courierov
Keyword(s):  
Electromagnetic Field ◽  
Magnetic Fields ◽  
Noise Exposure ◽  
Diagnostic Methods ◽  
High Tech ◽  
Electromagnetic Environment ◽  
Low Frequencies ◽  
Technical Personnel ◽  
Wide Range ◽  
And Control

Introduction. Magnetic resonance imaging (MRI) is one of the most dynamically developing, high-tech diagnostic methods. At the same time, the specific features of the electromagnetic environment and noise exposures at the medical and technical personnel operating and maintaining MRI workplaces are not well understood and are currently not taken into account when conducting a hygienic assessment of working condition in the Russian Federation. The aim of study is scientific substantiation of the need to improve the hygienic assessment of electromagnetic and noise conditions in the workplace of the staff of MRI departments. Materials and methods. An analytical method to evaluate the current domestic and foreign regulatory and methodological documents that determine the hygienic assessment requirements for electromagnetic environment and noise in MRI departments was used. More than 4 thousand measurements of the intensity of electromagnetic fields and noise in 88 rooms in Moscow equipped with different types of MRI (from 0,1 mT to 3 T) and studies of the performing duration various types of work and electromagnetic field and noise exposure on personnel was done. The amplitude-time and frequency parameters of the variables of the electromagnetic field (EMF) and sound pressure detailed studies have been carried out. Results. Significant differences in controlled indicators, acceptable exposure levels, and control methods has revealed by critical analysis of domestic and foreign hygienic regulatory and methodological documents. The studies showed that the medical and technical personnel of MRI departments are exposed with high spatial and temporal gradients static magnetic fields and extreme levels of noise during diagnostic work in the immediate vicinity of the tomograph magnet. The presence of time-varying magnetic fields in a wide range of low frequencies and radio frequencies having a complicated (pulsed) waveform is a feature of the electromagnetic environment in MRI. New standardized control parameters and limit levels for low-frequency ranges magnetic fields for their adequate hygienic assessment are proposed. Conclusion. The studies made it possible to substantiate the proposals the improving of electromagnetic field and noise hygienic assessment at the MRI staff workplaces.

scholarly journals Features of the use of additive technologies in operative orthopaedics

TRAUMA ◽  
2021 ◽  
Vol 22 (3) ◽  
pp. 12-19
Author(s):  
A.N. Kosiakov ◽  
A.Ye. Loskutov ◽  
K.A. Hrebennikov ◽  
A.V. Miloserdov ◽  
Ye.M. Fedin ◽  
...  
Keyword(s):  
Diagnostic Procedures ◽  
Physical Object ◽  
Additive Technologies ◽  
Diagnostic Methods ◽  
High Tech ◽  
Current State ◽  
Wide Range ◽  
Standard Tool ◽  
Level Of Training ◽  
High Level

Background. Additive technologies are increasingly making their way from university laboratories and high-tech industries into routine clinical practice and even into our everyday lives. Any enthusiast, having a PC and a 3D printer at his or her disposal, can create any physical object — from children’s toys to works of art. The presence on the market of a wide range of software pro-ducts, equipment, and consumables along with the data from mo-dern diagnostic methods, a high level of training and cooperation between doctors and engineers provide practical medicine with unprecedented opportunities. We are finally able to fully customize our treatment and diagnostic procedures: to perform precise preoperative planning; to draw up a detailed plan of the operation; to rehearse the intervention on full-scale anatomical prototypes using a standard tool; to conduct the surgery as quickly and atraumatically as possible; to minimize risks; to ensure the optimal functional result and to manufacture and install customized implants in the most difficult cases. The purpose was to draw the attention of our distinguished colleagues to the aspects of application of additive technologies in modern orthopaedic practice, to introduce them into the history and current state of medical prototyping, as well as to share technological nuances with them. Materials and methods. While writing this article, we incorporated the data of recent publications in specialized domestic and foreign periodicals, several monographs, materials from thematic conferences, the results of informal conversations with colleagues in the operating rooms, at the computer and production site, as well as our own experience (over 200 cases of prototyping). Conclusions. The availability of equipment, software, and consumables allows for the introduction of additive technology into the everyday practice of nearly every modern orthopaedic and trauma clinic.

scholarly journals Difficulties in diagnosing heart base tumor in dogs (case study)

2019 ◽  
Vol 2019 (4) ◽  
pp. 26-29
Author(s):  
Владислава Илларионова ◽  
Vladislava Illarionova
Keyword(s):  
Clinical Manifestations ◽  
Diagnostic Methods ◽  
High Tech ◽  
Myocardial Biopsy ◽  
Immunohistochemical Examination ◽  
Wide Range ◽  
Primary Neoplasm ◽  
Heart Tumors ◽  
Diagnostic Capabilities

Tumors of the heart are a rare and, until recently, poorly studied pathology in humans and animals. Currently, the frequency of intravital detection of heart tumors and their successful treatment is increasing due to the use of high-tech diagnostic methods, such as echocardiography, computed tomography and magnetic resonance imaging, myocardial biopsy with histological and immunohistochemical examination of the tumor. However, in some cases, even the use of a wide range of diagnostic capabilities of intravital diagnostics does not provide sufficient data and confirmation of the diagnosis is possible only by the results of postmortem autopsy. The clinical manifestations of tumor growth in the heart are variable and depend on the type of tumor and its location. The most common primary neoplasm of the heart is hemangiosarcoma, the second most frequent tumor is the base of the heart tumor - nonchromophinous paraganglioma (chemodectoma). Our clinical case indicates possible difficulties in the diagnosing of heart base tumors, even with the use of a wide range of high-tech diagnostic methods.

scholarly journals Increase the Efficiency of an Induction Motor Feed from Inverter for Low Frequencies by Combining Design and Control Improvements

Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 530
Author(s):  
Maria Dems ◽  
Krzysztof Komeza ◽  
Jacek Szulakowski ◽  
Witold Kubiak
Keyword(s):  
Energy Savings ◽  
High Efficiency ◽  
Open Loop ◽  
Design Parameters ◽  
Optimal Size ◽  
Low Frequencies ◽  
Field Weakening ◽  
Speed Regulation ◽  
Wide Range ◽  
And Control

Speed-controlled induction motors have the most significant potential for energy savings. The greatest problems with obtaining high efficiency occur in motors with a wide range of rotational speed regulation, as in the motors for driving industrial washing machines under consideration. While for the highest speeds, the dominant phenomenon is at field weakening. The problem is obtaining the optimal size of the magnetic flux for low rotation speed to prevent excessive saturation increasing current, and reduction of efficiency. This problem is usually solved by selecting the appropriate control for an already built machine. The authors propose a combination of activities when designing the motor structure with the selection of proper control, which allows for high efficiency. Since the drive does not require precise speed control or obtaining the required dynamics, it was possible to use an inexpensive control in an open loop, avoiding the cost of transmitters. Furthermore, the number of design parameters that are subject to change is significantly limited by technological factors and the available space in the washing machine. Proper parameter selection was made using a peripheral method assisted by field-circuit simulations. The proposed approach can be used in designing structures and selecting motors controls for other applications.

Comparative Effects of High-Tech Visual Scene Displays and Low-Tech Isolated Picture Symbols on Engagement From Students With Multiple Disabilities

2019 ◽  
Vol 50 (4) ◽  
pp. 693-702 ◽  
Author(s):  
Christine Holyfield ◽  
Sydney Brooks ◽  
Allison Schluterman
Keyword(s):  
Language Learning ◽  
Augmentative And Alternative Communication ◽  
Visual Analysis ◽  
Multiple Disabilities ◽  
Visual Scene ◽  
Future Research ◽  
High Tech ◽  
Single Subject ◽  
Wide Range ◽  
The Difference

Purpose Augmentative and alternative communication (AAC) is an intervention approach that can promote communication and language in children with multiple disabilities who are beginning communicators. While a wide range of AAC technologies are available, little is known about the comparative effects of specific technology options. Given that engagement can be low for beginning communicators with multiple disabilities, the current study provides initial information about the comparative effects of 2 AAC technology options—high-tech visual scene displays (VSDs) and low-tech isolated picture symbols—on engagement. Method Three elementary-age beginning communicators with multiple disabilities participated. The study used a single-subject, alternating treatment design with each technology serving as a condition. Participants interacted with their school speech-language pathologists using each of the 2 technologies across 5 sessions in a block randomized order. Results According to visual analysis and nonoverlap of all pairs calculations, all 3 participants demonstrated more engagement with the high-tech VSDs than the low-tech isolated picture symbols as measured by their seconds of gaze toward each technology option. Despite the difference in engagement observed, there was no clear difference across the 2 conditions in engagement toward the communication partner or use of the AAC. Conclusions Clinicians can consider measuring engagement when evaluating AAC technology options for children with multiple disabilities and should consider evaluating high-tech VSDs as 1 technology option for them. Future research must explore the extent to which differences in engagement to particular AAC technologies result in differences in communication and language learning over time as might be expected.

The Prospects and Risks Connected with Increasing the Level of Self-Organisation in Students

2020 ◽  
pp. 75-81
Author(s):  
Svetlana Alexandrovna Kosareva ◽  
Keyword(s):  
Higher Education ◽  
Professional Competence ◽  
Initial Level ◽  
Education Institution ◽  
Diagnostic Methods ◽  
Study Guide ◽  
Learning Approaches ◽  
Control Groups ◽  
Self Organisation ◽  
And Control

The paper describes the method for increasing the level of self-organisation in students which has been developed by the author. It also contains the method testing results and presents the prospects and risks teachers could face while applying the method in a higher education institution. The purpose of this study is to find out the prospects and risks of applying the method for increasing the level of self-organisation in students and to determine the ways of reducing the risks. Methodology. The author points out the learning approaches which were the basis of developing the method and describes diagnostic methods for determining students’ self-organisation levels. The work focused on increasing each student’s initial level consists of a theoretical and a practical part and includes project activities on creating a study guide. The results of the study. The method developed proved to be effective. It was established by diagnosing the final level of self-organisation in students in the experimental and control groups. The paper considers the advantages of the method among which there is universal character, flexibility, improvements to teacher’s and students’ professional competence, etc. At the same time it is necessary to be aware of the risks due to the increased amount of teacher’s work and the fact that students’ work within the project tends to be monotonous. In conclusion, the prospects of the method for increasing the level of self-organisation in students are related to its advantages and the final results of the work. The risks of its use can be reduced with the help of the measures proposed in the paper.

Convergence in norming and control of modern wireless technologies electromagnetic fields

2020 ◽  
Vol 60 (9) ◽  
pp. 610-613
Author(s):  
Michail Yu. Maslov ◽  
Yuri M. Spodobaev
Keyword(s):  
Wireless Communication ◽  
Electromagnetic Fields ◽  
Communication Systems ◽  
Communication Technologies ◽  
Telecommunications Industry ◽  
High Tech ◽  
Wireless Technologies ◽  
Almost All ◽  
Network Technologies ◽  
And Control

Telecommunications industry evolution shows the highest rates of transition to high-tech systems and is accompanied by a trend of deep mutual penetration of technologies - convergence. The dominant telecommunication technologies have become wireless communication systems. The widespread use of modern wireless technologies has led to the saturation of the environment with technological electromagnetic fields and the actualization of the problems of protecting the population from them. This fundamental restructuring has led to a uniform dense placement of radiating fragments of network technologies in the mudflow areas. The changed parameters of the emitted fields became the reason for the revision of the regulatory and methodological support of electromagnetic safety. A fragmented structural, functional and parametric analysis of the problem of protecting the population from the technological fields of network technologies revealed uncertainty in the interpretation of real situations, vulnerability, weakness and groundlessness of the methodological basis of sanitary-hygienic approaches. It is shown that this applies to all stages of the electromagnetic examination of the emitting fragments of network technologies. Distrust arises on the part of specialists and the population in not only the system of sanitary-hygienic control, but also the safety of modern network technologies is being called into question. Growing social tensions and radio phobia are everywhere accompanying the development of wireless communication technologies. The basis for solving almost all problems of protecting the population can be the transfer of subjective methods and means of monitoring and sanitary-hygienic control of electromagnetic fields into the field of IT.

THE SOME QUESTIONS OF AUTONOMOUS MOTION AND MANAGEMENT OF LAND-MOBILE ROBOTIC COMPLEXES FOR UKRAINIAN GROUND FORCESE

2019 ◽  
pp. 53-58
Author(s):  
О. Кravchuk ◽  
V. Symonenkov ◽  
I. Symonenkova ◽  
O. Hryhorev
Keyword(s):  
Large Scale ◽  
Armed Forces ◽  
Distributed Information ◽  
Wide Range ◽  
Highly Effective ◽  
Information Management Systems ◽  
Robotic Devices ◽  
Principles And Standards ◽  
And Control ◽  
The Eu

Today, more than forty countries of the world are engaged in the development of military-purpose robots. A number of unique mobile robots with a wide range of capabilities are already being used by combat and intelligence units of the Armed forces of the developed world countries to conduct battlefield intelligence and support tactical groups. At present, the issue of using the latest information technology in the field of military robotics is thoroughly investigated, and the creation of highly effective information management systems in the land-mobile robotic complexes has acquired a new phase associated with the use of distributed information and sensory systems and consists in the transition from application of separate sensors and devices to the construction of modular information subsystems, which provide the availability of various data sources and complex methods of information processing. The purpose of the article is to investigate the ways to increase the autonomy of the land-mobile robotic complexes using in a non-deterministic conditions of modern combat. Relevance of researches is connected with the necessity of creation of highly effective information and control systems in the perspective robotic means for the needs of Land Forces of Ukraine. The development of the Armed Forces of Ukraine management system based on the criteria adopted by the EU and NATO member states is one of the main directions of increasing the effectiveness of the use of forces (forces), which involves achieving the principles and standards necessary for Ukraine to become a member of the EU and NATO. The inherent features of achieving these criteria will be the transition to a reduction of tasks of the combined-arms units and the large-scale use of high-precision weapons and land remote-controlled robotic devices. According to the views of the leading specialists in the field of robotics, the automation of information subsystems and components of the land-mobile robotic complexes can increase safety, reliability, error-tolerance and the effectiveness of the use of robotic means by standardizing the necessary actions with minimal human intervention, that is, a significant increase in the autonomy of the land-mobile robotic complexes for the needs of Land Forces of Ukraine.

Hazards for Construction Workers

2017 ◽  
Author(s):  
Gavin H. West ◽  
Laura S. Welch
Keyword(s):  
Heavy Metals ◽  
Prevention And Control ◽  
Respiratory Diseases ◽  
Noise Exposure ◽  
Engineered Nanomaterials ◽  
Construction Workers ◽  
Chronic Obstructive ◽  
Obstructive Pulmonary Disease ◽  
And Control ◽  
The Impact

This chapter describes the hazards for construction workers, with a particular focus on injuries as well as exposures to hazardous chemicals and dusts. A section describes hazardous exposures to lead and other heavy metals. Another section describes noise exposure. The impact of musculoskeletal disorders among construction workers is then discussed. A section on respiratory diseases focuses on asbestosis, silicosis, chronic obstructive pulmonary disease, and asthma. Exposures known to cause dermatitis and cancer are reviewed. There is a discussion of engineered nanomaterials as a potential emerging hazard. Various approaches to prevention and control, including regulations and health services, are described.

scholarly journals Information and information resources in COVID-19: Awareness, control, and prevention

2021 ◽  
pp. 096100062110165
Author(s):  
Mohammadhiwa Abdekhoda ◽  
Fatemeh Ranjbaran ◽  
Asghar Sattari
Keyword(s):  
Low Cost ◽  
Information Resources ◽  
Age And Gender ◽  
Use Of Resources ◽  
Strategic Approach ◽  
Wide Range ◽  
Data Collection Instrument ◽  
Control And Prevention ◽  
And Gender ◽  
And Control

This study was conducted with the aim of evaluating the role of information and information resources in the awareness, control, and prevention of COVID-19. This study was a descriptive-analytical survey in which 450 participants were selected for the study. The data collection instrument was a researcher-made questionnaire. Descriptive and inferential statistics were used to analyze the data through SPSS. The findings show that a wide range of mass media has become well known as information resources for COVID-19. Other findings indicate a significant statistical difference in the rate of using information resources during COVID-19 based on age and gender; however, this difference is not significant regarding the reliability of information resources with regard to age and gender. Health information has an undisputable role in the prevention and control of pandemic diseases such as COVID-19. Providing accurate, reliable, and evidence-based information in a timely manner for the use of resources and information channels related to COVID-19 can be a fast and low-cost strategic approach in confronting this disease.

scholarly journals Gold–Carbon Nanocomposites for Environmental Contaminant Sensing

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 719
Author(s):  
Shahrooz Rahmati ◽  
William Doherty ◽  
Arman Amani Babadi ◽  
Muhamad Syamim Akmal Che Mansor ◽  
Nurhidayatullaili Muhd Julkapli ◽  
...  
Keyword(s):  
Environmental Pollutants ◽  
High Sensitivity ◽  
Environmental Crisis ◽  
World Population ◽  
Chemical Contaminants ◽  
Carbon Nanocomposites ◽  
Minimal Sample ◽  
Wide Range ◽  
And Control ◽  
Analytical Tools

The environmental crisis, due to the rapid growth of the world population and globalisation, is a serious concern of this century. Nanoscience and nanotechnology play an important role in addressing a wide range of environmental issues with innovative and successful solutions. Identification and control of emerging chemical contaminants have received substantial interest in recent years. As a result, there is a need for reliable and rapid analytical tools capable of performing sample analysis with high sensitivity, broad selectivity, desired stability, and minimal sample handling for the detection, degradation, and removal of hazardous contaminants. In this review, various gold–carbon nanocomposites-based sensors/biosensors that have been developed thus far are explored. The electrochemical platforms, synthesis, diverse applications, and effective monitoring of environmental pollutants are investigated comparatively.

Sign in / Sign up

Export Citation Format

Share Document