scholarly journals Design and Simulation Converter with Buck-boost Converter as The Voltage Stabilizer

2020 ◽  
Vol 3 (3) ◽  
pp. 77-81
Author(s):  
Aris Suryadi ◽  
Purwandito Tulus Asmoro ◽  
Agus Sofwan
Keyword(s):  
Output Voltage ◽  
Input Voltage ◽  
Boost Converter ◽  
Voltage Stabilizer ◽  
Dc Voltage ◽  
Set Point ◽  
Voltage Output ◽  
Further Development ◽  
Stable Voltage ◽  
Research Show

Buck-boost Converter is the device with the function to convert DC Voltage input to the setpoint DC Voltage output. Buck-boost converter can be used for regulating unstable voltage became a stable voltage by the user’s needs. Using a Buck-boost Converter in the research is about how to apply a Buck-boost Converter of the AC to AC Converter device, AC to AC Converter is the device to convert AC voltage to AC Voltage where the voltage can be modified. In the research, the input Voltage of AC to AC Converter is unstable, so that the output Voltage is unstable too in the range of 190 V to 250 V. To solve this problem, that the Buck-boost can be installed to AC to AC Converter, it is useful to keep output Voltage stable even though the input Voltage is unstable. The AC to AC Converter device in this research consist of Rectifier, Buck-boost Converter, and Inverter. The experiment result of this research show that unstable AC input Voltage, 190 V to 250 V from the source after passing a Rectifier, became an unstable DC input Voltage, then be regulated by Buck-boost Converter became a stable DC Voltage, and then after passing the Inverter, a stable DC Voltage is converted became a stable AC Voltage, corresponding with the set point. For further development, AC to AC Converter combined with Buck-boost Converter can be applied to maintain a standard of Voltage 220 V AC from the sources to keep it stable.

scholarly journals Implementation of Buck-Boost Converter as Low Voltage Stabilizer at 15 V

2019 ◽  
Vol 9 (4) ◽  
pp. 2230
Author(s):  
Suwarno Suwarno ◽  
Tole Sutikno
Keyword(s):  
Power Electronics ◽  
Wind Power ◽  
Output Voltage ◽  
Low Voltage ◽  
Input Voltage ◽  
Boost Converter ◽  
Voltage Stabilizer ◽  
Voltage Regulator ◽  
Output Current ◽  
Converter Design

<p>This paper presents the implementation of the buck-boost converter design which is a power electronics applications that can stabilize voltage, even though the input voltage changes. Regulator to stabilize the voltage using PWM pulse that triger pin 2 on XL6009. In this design of buck-boost converter is implemented using the XL6009, LM7815 and TIP2955. LM7815 as output voltage regulator at 15V with 1A output current, while TIP2955 is able to overcome output current up to 5A. When the LM7815 and TIP2955 are connected in parallel, the converter can increase the output current to 6A.. Testing is done using varied voltage sources that can be set. The results obtained from this design can be applied to PV (Photovoltaic) and WP (Wind Power), with changes in input voltage between 3-21V dc can produce output voltage 15V.</p>

scholarly journals An Overview on Problem of Balancing Of DC Capacitor Voltage in Diode-Clamped Multilevel Inverter Using Boost Converter

10.29007/m2mq ◽  
2018 ◽  
Author(s):  
Shubham R. Patel ◽  
Gaurang K. Sharma ◽  
Ashish R. Patel
Keyword(s):  
High Voltage ◽  
Output Voltage ◽  
Harmonic Distortion ◽  
Load Condition ◽  
Boost Converter ◽  
Multilevel Inverter ◽  
Matlab Simulink ◽  
Dc Voltage ◽  
Voltage Output ◽  
Capacitor Voltage

Multilevel inverter allows the production of high voltage with lower harmonic distortion in ac output and it eliminates the need of transformer. With the usage of multilevel inverter, we can get the required ac voltage output from multiple dc voltage rails. One of the disadvantage in it is the unbalancing of dc link capacitor voltage. The basic aim of this paper is the balancing of dc link capacitor voltage in diode-clamped multilevel inverter. There are different approaches which could be used for balancing of the capacitor voltage. In this paper, the method of additional auxiliary circuit in the form of Two-level Boost converter is being adopted to balance the inner capacitor voltages so as to get the required multilevel output. This balancing leads to the reliability in the inverter output voltage and extension in life of capacitor. The simulations for this are being performed in MATLAB SIMULINK® and the result are being analyzed for the same by employing it for different load condition. The scheme thus offer the proper balancing of capacitor voltage.

scholarly journals Implementasi DC-DC Boost Converter Menggunakan Arduino Berbasis Simulink Matlab

2020 ◽  
Vol 1 (2) ◽  
pp. 144-149
Author(s):  
Muldi Yuhendri ◽  
Randy Setiawan
Keyword(s):  
Direct Current ◽  
Output Voltage ◽  
Input Voltage ◽  
Voltage Regulation ◽  
Power Converter ◽  
Boost Converter ◽  
Experimental Results ◽  
Voltage Source ◽  
Matlab Simulink ◽  
Dc Voltage

Direct current (dc) voltage sources are one of the voltage sources most widely used for various purposes. Dc voltage can be obtained from a dc generator or by converting an ac voltage into a dc voltage using a power converter. There are several dc voltage levels that are commonly used by electrical and electronic equipment. To get a dc voltage that can be used for various equipment, then a dc voltage source must be varied according to the required. One way to get a variable dc voltage is to use a dc-dc converter. This research proposes a dc-dc boost converter that can increase the dc voltage with varying outputs. The boost converter is proposed using Arduino Uno as a controller with an input voltage of 12 volts. The converter output voltage regulation is implemented through Arduino programming using Matlab simulink. The experimental results show that the boost converter designed in this study has worked well as intended. This can be seen from the boost converter output voltage which is in accordance with the reference voltage entered in the Matlab simulink program

scholarly journals Rancang Bangun Penstabil Tegangan pada Pembangkit Termoelektrik Skala Pico Berbasis Boost Converter

2017 ◽  
Vol 2 (2) ◽  
pp. 117
Author(s):  
Ailin Rohmatul Fajria
Keyword(s):  
Thermoelectric Generator ◽  
Thermoelectric Module ◽  
Input Voltage ◽  
Boost Converter ◽  
Voltage Stabilizer ◽  
Dc Voltage ◽  
Electric Generator ◽  
Final Project ◽  
R Value ◽  
Stabilizer Circuit

Least of using thermoelectric module as an electric generator in society was often because of energy which was produced by it was unstable. So we need  voltage stabilizer circuit to push up and down the voltage to certain voltage. The purpose of this final project is to design a voltage stabilizer circuit in pico scale DC voltage based on boost converter. This experiment is done by three stage there are, stabilizer experiment by adaptor, performance of thermoelectric generator and also stabilizer experiment by thermoelectric generator.The yield of the first experiment, when we gave input voltage 3 until 9 V produced 5,07 until 5,08 V, so it has 98,55% accuracy toward 5 V expect. On the second experiment, when it is given by ∆T 30, 50 and 70 °C produced 2,5, 3,04 and 3,39 V. While on third experiment, with the same ∆T produced 5,08 until 5,09 V. But, when ∆T which given by 12 °C produced only 0,8 and 0,9 V in second and third experiment, it is because of the voltage is not fulfill accupation voltage 2 until 24 V on datasheet of used IC. Relation between ∆T and Voltage (V), Current (I)  also Power (P) which was produced have positive R value 0,76 until 1, this mean that ∆T directly proportional to V,I and P. So, the higher ∆T we give, the higher V, I and P will be.Keywords : stabilizer, thermoelectric, boost converter.

scholarly journals Speed Control of PMSM with High Step-Up Dual Switch Solar Converter

2019 ◽  
Vol 9 (1) ◽  
pp. 4299-4304
Keyword(s):  
Output Voltage ◽  
Permanent Magnet Synchronous Motor ◽  
Speed Control ◽  
Input Voltage ◽  
High Gain ◽  
Solar Irradiation ◽  
Control Technique ◽  
Variable Speed ◽  
Dc Voltage ◽  
Voltage Output

For PVA renewable source the output voltage is fluctuating as the solar irradiation is variable with respect to time. In conventional methods to control the DC voltage output of the PVA DC-DC booster converters are used. These converters don’t have high gain and also the ripple of the DC output voltage is high. The conventional PWM DC-DC booster converter is replaced with a feedback controlled dual switch converter for better control of output DC voltage with higher gain and reduced ripple. In this paper, the output of the dual switch converter is fed to controlled six switch inverter running a permanent magnet synchronous motor. The motor is controlled with a reference speed control technique for change in variable speed and torque operations. The input voltage of the converter is also made variable with respect to time with change in solar irradiation; the response of the proposed converter is good even for this condition. MATLab/Simulink is used to design all the modules of the proposed work.

scholarly journals Efficient Performance Technical Selection of Positive Buck-Boost Converter

2018 ◽  
Vol 2 (2) ◽  
pp. 20-38
Author(s):  
Ahmed Abbas ◽  
Abadal-Salam Hussain
Keyword(s):  
Pulse Width ◽  
Output Voltage ◽  
Pulse Width Modulation ◽  
Input Voltage ◽  
Boost Converter ◽  
Dc Voltage ◽  
Voltage Polarity ◽  
Efficient Performance ◽  
Efficient Power ◽  
Selection Of

The necessity for stable DC voltage in both removable and non-removable systems has been considerably desired recently. These systems have to be implemented efficiently in order to be responding rapidly based voltage variations. Under this act, the efficient power can extend the lifetime of the employed batteries in such systems. The presented efficiency can be realized with respect to buck and boost components that were implemented to generate what is called positive Buck-Boost converter circuits. The main functions of the positive Buck-Boost converter are identified by announcing the unchanged situation of output voltage polarity and indicating the level of the voltage rationally between the input and the output. It is worth mention, the positive Buck-Boost converter circuit was simulated based Proteus software, and the hardware components were connected in reality. Finally, the microcontroller type that employed in the proposed system is PIC_16F877A, which realizes the input voltage sensitively to generate Pulse Width Modulation (PWM) signals in order to feed the employed MOSFET element.

scholarly journals Quadratic Boost Converter

2021 ◽  
Vol 9 (VII) ◽  
pp. 2010-2014
Author(s):  
Mamidala Hemanth Reddy
Keyword(s):  
Output Voltage ◽  
Semiconductor Device ◽  
Low Voltage ◽  
Input Voltage ◽  
Boost Converter ◽  
Voltage Gain ◽  
Practical Utilization ◽  
Analysis And Design ◽  
Simulink Model ◽  
Grid Connection

The output voltage from the sustainable energy like photovoltaic (PV) arrays and fuel cells will be at less amount of level. This must be boost considerably for practical utilization or grid connection. A conventional boost converter will provides low voltage gain while Quadratic boost converter (QBC) provides high voltage gain. QBC is able to regulate the output voltage and the choice of second inductor can give its current as positive and whereas for boost increases in the voltage will not able to regulate the output voltage. It has low semiconductor device voltage stress and switch usage factor is high. Analysis and design modeling of Quadratic boost converter is proposed in this paper. A power with 50 W is developed with 18 V input voltage and yield 70 V output voltage and the outcomes are approved through recreation utilizing MATLAB/SIMULINK MODEL.

scholarly journals Voltage Tracking Control of DC- DC Boost Converter Using Fuzzy Neural Network

2018 ◽  
Vol 9 (4) ◽  
pp. 1657 ◽  
Author(s):  
Waleed Ishaq Hameed ◽  
Baha Aldeen Sawadi ◽  
Ali Muayed
Keyword(s):  
Neural Network ◽  
Tracking Control ◽  
Output Voltage ◽  
Fuzzy Neural Network ◽  
Sudden Change ◽  
Input Voltage ◽  
Boost Converter ◽  
Data Sets ◽  
Fuzzy Neural ◽  
Output Load

<span lang="EN-US">This paper deals with voltage tracking control of DC- DC boost converter based on Fuzzy neural network. Maintaining the output voltage of the boost converter in some applications are very important, especially for sudden change in the load or disturbance in the input voltage. Traditional control methods usually have some disadvantages in eliminating these disturbances, as the speed of response to these changes is slow and thus affect the regularity of the output voltage of the converter. The strategy is to sense the output voltage across the load and compare it with the reference voltage to ensure that it follows the required reference voltages. In this research, fuzzy neural was introduced to achieve the purpose of voltage tracking by training the parameter of controller based on previous data. These data sets are the sensing input voltage of the converter and the value of the output load changes. To establish the performance of proposed method, MATLAB/SIMULINK environments are presented, simulation results shows that proposed method works more precisely, faster in response and elimination the disturbances</span>

scholarly journals Modified Multi Input Multilevel DC-DC Boost Converter for Hybrid Energy Systems

2020 ◽  
Vol 9 (4) ◽  
pp. 1067-1072
Keyword(s):  
Output Voltage ◽  
Low Voltage ◽  
Complex Structure ◽  
Energy Systems ◽  
Input Voltage ◽  
Boost Converter ◽  
Design Parameters ◽  
Hybrid Energy ◽  
Hybrid Energy Systems ◽  
Constant Output

DC-DC converters are playing an important role in designing of Electric Vehicles, integration of solar cells and other DC applications. Contemporary high power applications use multilevel converters that have multi stage outputs for integrating low voltage sources. Conventional DC-DC converters use single source and have complex structure while using for Hybrid Energy Systems. This paper proposes a multi-input, multi-output DC-DC converter to produce constant output voltage at different input voltage conditions. This topology is best suitable for hybrid power systems where the output voltage is variable due to environmental conditions. It reduces the requirement of magnetic components in the circuit and also reduces the switching losses. The proposed topology has two parts namely multi-input boost converter and level-balancing circuit. Boost converter increases the input voltage and Level Balancing Circuit produce Multi output. Equal values of capacitors are used in Level Balancing Circuit to ensure the constant output voltage at all output stages. The operating modes of each part are given and the design parameters of each part are calculated. Performance of the proposed topology is verified using MATLAB/Simulink simulation which shows the correctness of the analytical approach. Hardware is also presented to evaluate the simulation results.

scholarly journals Vertical Axis Wind Turbine Improvement using DC-DC Boost Converter

2020 ◽  
Vol 188 ◽  
pp. 00017
Author(s):  
Khairunnisa Khairunnisa ◽  
Syaiful Rachman ◽  
Edi Yohanes ◽  
Awan Uji Krismanto ◽  
Jazuli Fadil ◽  
...  
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Output Voltage ◽  
Vertical Axis ◽  
Input Voltage ◽  
Pi Controller ◽  
Boost Converter ◽  
Oxide Semiconductor ◽  
Vertical Axis Wind Turbine ◽  
Constant Output

Vertical axis wind turbine (VAWT) can be operated in any direction of wind speed, but it has low rotation. To improve the performance of VAWT in which low rotation, this paper presents a simple control strategy of VAWT using a DC-DC boost converter to tap constant voltage in a standalone application. The main objective of this research is to maintain a constant output voltage of converter despite variation input voltage affected by variable wind speed. A simple proportional-integral (PI) controller has been used for a DC-DC boost converter and tested in MATLAB-Simulink environment, with the closed-loop system of the converter maintain constant output voltage although the wind speed is kept changing. The PI controller obtains the feedback from the output voltage of the boost converter to produce the correct pulse width modulation (PWM) duty cycle and trigger the metal oxide semiconductor field effect transistor (MOSFET) following the reference voltage of the turbine. This system has suppressed the value of overshoot and increased the efficiency of wind turbines as 34 %.

Sign in / Sign up

Export Citation Format

Share Document