Laser Stimulation Effect on FinFET and Case Study

2015 ◽  
Author(s):  
Kyeongju Jin ◽  
Sukho Lee ◽  
Keonil Kim ◽  
Yunwoo Lee ◽  
Yojoung Kim
Keyword(s):  
Experimental Data ◽  
The Other ◽  
Laser Source ◽  
Laser Stimulation ◽  
Two Photon ◽  
Cw Laser ◽  
Defect Localization ◽  
Laser Sources ◽  
Scan Chain

Abstract In the case of conventional planar FET, Dynamic Laser Stimulation (DLS) is a very effective method to isolate marginal failure. Depending on laser sources, DLS is divided by Soft Defect Localization (SDL) and Laser Assisted Device Alteration (LADA). SDL uses 1320nm wavelength laser source in order to induce localized heat. On the other hand, LADA uses 1064nm wavelength laser source to generate photo carriers. But for the FinFET the effect of laser stimulation is not clear yet. This paper introduces the effect of laser stimulation on FinFET transistors based on wavelength, the so called LADA and two-photon LADA. The experimental data show changes in Vth and Idsat with different character for a single FinFET transistor. A case study further explains this laser stimulation effect via scan chain LVcc marginal failure analysis localized with 1320nm CW laser stimulation and nano-probing analysis.

Case Study: Combined Dynamic Laser Stimulation and Static Emission Microscopy Techniques Applied to Scan Test Failure on Mixed Mode Device

2012 ◽  
Author(s):  
Magdalena Sienkiewicz ◽  
Philippe Rousseille
Keyword(s):  
Mixed Mode ◽  
Laser Stimulation ◽  
Scan Test ◽  
Silicon Bulk ◽  
Defect Localization ◽  
Emission Microscopy ◽  
Microscopy Techniques ◽  
Test Failure

Abstract This paper presents a case study on scan test reject in a mixed mode IC. It focuses on the smart use of combined mature FA techniques, such as Soft Defect Localization (SDL) and emission microscopy (EMMI), to localize a random scan test anomaly at the silicon bulk level.

Optimization of EeLADA for Circuit Logic Defect Localization Using Defect Simulation

2016 ◽  
Author(s):  
M. Lee ◽  
B.L. Yeoh ◽  
S.H. Goh ◽  
G.F. You ◽  
Alan Tan ◽  
...  
Keyword(s):  
Failure Analysis ◽  
Digital Device ◽  
Laser Stimulation ◽  
Successful Case ◽  
Alternative Approach ◽  
Defect Localization ◽  
Multi Level ◽  
Defect Simulation

Abstract EeLADA has been introduced previously as a prospective alternative approach to DFT scan diagnosis for scan logic defect localization. It has the capability to reveal induced signals from laser stimulation that are relevant to the failure signature by comparing failing pins and cycles of the bad device. Multiple schemes involving different combinations for comparison are possible. Defect simulations based on cell fault injections on a multi-level logic of a real digital device circuit characterizes the different comparison schemes. The findings are used to devise an optimized methodology to determine suspected fail locations to guide physical failure analysis to reveal the defect. A successful case study substantiates the method.

Use of Posterior Probabilities to Evaluate Methods of Discriminant Analysis

1981 ◽  
Vol 20 (04) ◽  
pp. 207-212 ◽  
Author(s):  
J. Hermans ◽  
B. van Zomeren ◽  
J. W. Raatgever ◽  
P. J. Sterk ◽  
J. D. F. Habbema
Keyword(s):  
Experimental Data ◽  
Discriminant Analysis ◽  
Posterior Probabilities

By means of a case study the choice between several methods of discriminant analysis is presented. Experimental data of a two-groups problem with one or two variables is analysed. The different methods are compared according to posterior probabilities which can be computed for each subject and which are the basis of discriminant analysis. These posterior probabilities are analysed graphically as well as numerically.

Development and regional planning within the decentralized administrative frame: case study (the Jordanian Experiment)

2018 ◽  
Vol 1 (2) ◽  
pp. 60-72
Author(s):  
Mansour Safran
Keyword(s):  
Regional Planning ◽  
The Other ◽  
Negative Effects ◽  
Administrative Procedures ◽  
The Way

This aims to review and analyze the Jordanian experiment in the developmental regional planning field within the decentralized managerial methods, which is considered one of the primary basic provisions for applying and success of this kind of planning. The study shoed that Jordan has passed important steps in the way for implanting the decentralized administration, but these steps are still not enough to established the effective and active regional planning. The study reveled that there are many problems facing the decentralized regional planning in Jordan, despite of the clear goals that this planning is trying to achieve. These problems have resulted from the existing relationship between the decentralized administration process’ dimensions from one side, and between its levels which ranged from weak to medium decentralization from the other side, In spite of the official trends aiming at applying more of the decentralized administrative policies, still high portion of these procedures are theoretical, did not yet find a way to reality. Because any progress or success at the level of applying the decentralized administrative policies doubtless means greater effectiveness and influence on the development regional planning in life of the residents in the kingdom’s different regions. So, it is important to go a head in applying more steps and decentralized administrative procedures, gradually and continuously to guarantee the control over any negative effects that might result from Appling this kind of systems.   © 2018 JASET, International Scholars and Researchers Association

The Relationship between Working Environment and Internship Satisfaction Level: A Case Study Of A 4-Star Hotel Restaurant In Germany

2019 ◽  
Vol 2 (4) ◽  
pp. 276-291
Author(s):  
Chatarina Natalia Putri
Keyword(s):  
Career Development ◽  
Working Hours ◽  
Learning Opportunities ◽  
Working Environment ◽  
The Other ◽  
Satisfaction Level ◽  
Supervisory Support ◽  
Support Organization ◽  
The Relationship

There are many factors that can lead to internship satisfaction. Working environment is one of the factors that will result to such outcome. However, many organizations discarded the fact of its importance. The purpose of this study is to determine whether there is a significant relationship between working environment and internship satisfaction level as well as to determine whether the dimensions of working environment significantly affect internship satisfaction. The said dimensions are, learning opportunities, supervisory support, career development opportunities, co-workers support, organization satisfaction, working hours and esteem needs. A total of 111 questionnaires were distributed to the respondents and were processed by SPSS program to obtain the result of this study. The results reveal that learning opportunities, career development opportunities, organization satisfaction and esteem needs are factors that contribute to internship satisfaction level. In the other hand, supervisory support, co-workers support and working hours are factors that lead to internship dissatisfaction. The result also shows that organization satisfaction is the strongest factor that affects internship satisfaction while co-workers support is the weakest.

‘Behind the Poetic Fiction’: Freud, Schnitzler and Feminine Subjectivity

2004 ◽  
Vol 6 (2) ◽  
pp. 201-223
Author(s):  
Elizabeth Goodstein
Keyword(s):  
Sigmund Freud ◽  
The Other ◽  
Modernist Literature ◽  
Arthur Schnitzler ◽  
Feminine Subjectivity ◽  
The Uncanny ◽  
Poetic Fiction ◽  
Psychoanalytic Theories

In 1922 Sigmund Freud wrote to fellow Viennese author and dramatist Arthur Schnitzler: ‘I believe I have avoided you out of a sort of fear of my double’. Through a series of reflections on this imagined doubling and its reception, this paper demonstrates that the ambivalent desire for his literary other attested by Freud's confession goes to the heart of both theoretical and historical questions regarding the nature of psychoanalysis. Bringing Schnitzler's resistance to Freud into conversation with attempts by psychoanalytically oriented literary scholars to affirm the Doppengängertum of the two men, it argues that not only psychoanalytic theories and modernist literature but also the tendency to identify the two must be treated as historical phenomena. Furthermore, the paper contends, Schnitzler's work stands in a more critical relationship to its Viennese milieu than Freud's: his examination of the vicissitudes of feminine desire in ‘Fräulein Else’ underlines the importance of what lies outside the oedipal narrative through which the case study of ‘Dora’ comes to be centered on the uncanny nexus of identification with and anxious flight from the other.

Interrelationships between municipal spatial policy strategy and airport operation and development. Lodz Airport case study

2018 ◽  
Vol 59 (1) ◽  
pp. 65-79
Author(s):  
Katarzyna Nikorowicz-Zatorska
Keyword(s):  
Land Use ◽  
Urban Planning ◽  
Cultural Development ◽  
The Other ◽  
Local Authorities ◽  
Spatial Management ◽  
The One ◽  
Surrounding Areas

Abstract The present paper focuses on spatial management regulations in order to carry out investment in the field of airport facilities. The construction, upgrades, and maintenance of airports falls within the area of responsibility of local authorities. This task poses a great challenge in terms of organisation and finances. On the one hand, an active airport is a municipal landmark and drives local economic, social and cultural development, and on the other, the scale of investment often exceeds the capabilities of local authorities. The immediate environment of the airport determines its final use and prosperity. The objective of the paper is to review legislation that affects airports and the surrounding communities. The process of urban planning in Lodz and surrounding areas will be presented as a background to the problem of land use management in the vicinity of the airport. This paper seeks to address the following questions: if and how airports have affected urban planning in Lodz, does the land use around the airport prevent the development of Lodz Airport, and how has the situation changed over the time? It can be assumed that as a result of lack of experience, land resources and size of investments on one hand and legislative dissonance and peculiar practices on the other, aviation infrastructure in Lodz is designed to meet temporary needs and is characterised by achieving short-term goals. Cyclical problems are solved in an intermittent manner and involve all the municipal resources, so there’s little left to secure long-term investments.

Producers' Response to Changes in Prices and Marketing Policies: A Case Study of Sugarcane and Paddy in Eastern U.P. by S. C. Gupta and A. Majid. New York: Asia Publishing House, 1965.

1968 ◽  
Vol 8 (2) ◽  
pp. 308-309
Author(s):  
Mohammad Irshad Khan
Keyword(s):  
New York ◽  
Time Series ◽  
Time Series Data ◽  
Publishing House ◽  
Economic Incentives ◽  
The Other ◽  
Series Data ◽  
Poor Countries ◽  
Northern India

It is alleged that the agricultural output in poor countries responds very little to movements in prices and costs because of subsistence-oriented produc¬tion and self-produced inputs. The work of Gupta and Majid is concerned with the empirical verification of the responsiveness of farmers to prices and marketing policies in a backward region. The authors' analysis of the respon¬siveness of farmers to economic incentives is based on two sets of data (concern¬ing sugarcane, cash crop, and paddy, subsistence crop) collected from the district of Deoria in Eastern U.P. (Utter Pradesh) a chronically foodgrain deficit region in northern India. In one set, they have aggregate time-series data at district level and, in the other, they have obtained data from a survey of five villages selected from 170 villages around Padrauna town in Deoria.

The Tradition of Religious Books (Kitabs) Printing: Case Study of the Production and Reproduction of Religious Books (Kitabs) in Cianjur and Sukabumi, West Java, Indonesia

2020 ◽  
Vol 17 (2) ◽  
pp. 291-320
Author(s):  
Asep Saefullah
Keyword(s):  
Data Collection ◽  
Screen Printing ◽  
The Other ◽  
West Java ◽  
Simple Method ◽  
Original Essays ◽  
Printed Books ◽  
Religious Books ◽  
Living Tradition

Tulisan ini membahas fenomena penyebaran kitab-kitab cetak keaga­maan di Jawa Barat, khususnya di Sukabumi dan Cianjur. Jenis kitab ini biasanya menggunakan tulisan Arab dengan bahasa Sunda dan menggu­nakan aksara Pegon. Kitab-kitab cetak dari jenis-jenis itu diproduksi dan direproduksi, dan masih digunakan sampai hari ini. Oleh karena itu, fenomena ini dapat disebut sebagai “living tradition”. Pengumpulan data dilakukan dengan melacak dan merekam kitab-kitab yang diproduksi (disalin atau dikarang) dan direproduksi (dicetak atau digandakan) dengan metode seder­hana, yakni fotocopi dan pencetakan tradisional seperti stensil, sablon, dan "cetak toko". Tulisan ini bertujuan untuk memetakan dan merevisi kategorisasi kitab-kitab tersebut dari kajian terdahulu berdasarkan jenis karya, seperti karangan asli, tuqilan, terjemahan, syarḥ (penjelasan), khulasah (ringkasan) yang lain, dan juga berdasarkan bahasa dan aksara yang digunakan. Selain itu, tulisan ini juga mengamati lembaga-lembaga atau individu-individu yang masih mereproduksi buku-buku (kitab-kitab) keagamaan sederhana seperti perusahaan percetakan atau pesantren yang menerbitkan kitab-kitab tersebut. Pada akhir artikel ini, ada beberapa saran dalam upaya untuk melestarikan kitab-kitab cetak dan karya-karya tersebut.Kata kunci: kitab, jenis karya, pencetakan tradisional, Sunda, Pegon, Jawa Barat This paper discusses the phenomenon of the spreading of religious printed books (kitabs) in West Java, especially in Sukabumi and Cianjur, which are characterized by the use of Arabic writing in Sundanese (or known as Pegon script). The printed books (Kitabs) of those types are produced and reproduced, and are still used to this day. Therefore, this phenomenon can be called as a “living tradition”. Data collection was conducted by tracing and recording religious books (kitabs) that are pro-duced (rewritten or compossed) and reproduced (printed or duplicated) with a simple method, known as photocopying and traditional printing such as stencils, screen printing, and “shop printing”. This paper aims to map and revise the categorization of these Kitabs from previous studies based on the types of works including original essays, tuqilan (quotations), translation, sharh (explanation), khulaṣah (summary), or the other, and also based on the language and the script used. In addition, this paper also observes the institutions or individuals that are still reproducing these printed religious books such as the printing company or pesantren that publish such kitabs. At the end of this article, there are some suggestions in attempts to preserve those printed kitabs and the works.Keywords: Kitabs, type of work, traditional printing, Sunda, Pegon, West Java

Low Temperature Fault Isolation Using Soft Defect Localization

2012 ◽  
Author(s):  
Kristopher D. Staller
Keyword(s):  
Low Temperatures ◽  
Laser Scanning ◽  
Low Cost ◽  
Fault Isolation ◽  
Laser Scanning Microscopy ◽  
Cold Temperature ◽  
Multiple Point ◽  
Defect Localization ◽  
Low Levels

Abstract Cold temperature failures are often difficult to resolve, especially those at extreme low levels (< -40°C). Momentary application of chill spray can confirm the failure mode, but is impractical during photoemission microscopy (PEM), laser scanning microscopy (LSM), and multiple point microprobing. This paper will examine relatively low-cost cold temperature systems that can hold samples at steady state extreme low temperatures and describe a case study where a cold temperature stage was combined with LSM soft defect localization (SDL) to rapidly identify the cause of a complex cold temperature failure mechanism.

Sign in / Sign up

Export Citation Format

Share Document