scholarly journals MODEL DIRECT INSTRUCTION DENGAN TEKNIK PROBING PROMPTING : DAMPAK TERHADAP HASIL BELAJAR FISIKA SISWA KELAS X SMA NEGERI 4 LUBUKLINGGAU TAHUN PELAJARAN 2018/2019

2019 ◽  
Vol 1 (1) ◽  
pp. 24-37
Author(s):  
Nina Trisna ◽  
Tri Ariani

This study aims to determine the completeness of the learning outcomes of Class X students after applying the Direct Instruction model with Prompting Probing techniques in 4 Lubuklinggau Public High Schools in 2018/2019 Academic Year significantly. This type of research is quasi-experimental research carried out without a comparison class. The design used in this study was one group pre-test post-test. The population in the study was all class X students of SMA Negeri 4 Lubuklinggau, amounting to 143 students. Samples were taken randomly, obtained class X.MIA 2, which amounted to 36 students as samples. Data collection is done by test technique. The collected data was analyzed using the t-test at a significant level α = 0.05. Based on the results of data analysis, it can be concluded that the results of physics learning in class X of SMA Negeri 4 Lubuklinggau after the Probing Prompting technique were applied were significantly completed. The average score of students' final test is 75.11 and the percentage of students who complete is 80.5%.

2018 ◽  
Vol 2 (1) ◽  
pp. 30-35
Author(s):  
Aantri Heriyanti ◽  
Ovilia Putri Utami Gumay

This study aims to determine the completeness of physics learning outcomes class VIII SMP Ar-Risalah Lubuklinggau academic year 2017/2018 after applied Direct Instruction model. The type of research is quasi-experimental research, with the design used is one group pretest and posttest design. The population in this study is all students of class VIII SMP Ar-Risalah Lubuklinggau academic year 2017/2018. The sample of the study consisted of one class taken at random by drawing the class VIII.B. Technique of data collecting using technique of test. Student test score data were analyzed using t-test. Based on the results of the analysis of the final test data obtained t count = 2.84 greater than ttable = 1.703 with the average score of the final test of students amounted to 73.89 and the percentage of complete students reached 82.14%. So it can be concluded that the results of physics learning class VIII SMP Ar-Risalah Lubuklinggau academic year 2017/2018 after the implementation of Direct Instruction model significantly completed. Keywords: Direct Instruction Model, Learning Outcomes, Physics.


2019 ◽  
Vol 2 (1) ◽  
pp. 36-48
Author(s):  
Wita Romita Ayu ◽  
Tri Ariani ◽  
Wahyu Arini

The purpose of this study was to determine "The Effect of Quantum Teaching Learning Model on Physics Learning Outcomes of Class X Students of SMK Negeri 3 Lubuklinggau in 2018/2019 Academic Year". This research is motivated by the low student physics learning outcomes. The purpose of this study was to determine the effect of the pre-test post-test group design model. The population in this study were all grade X class of SMK Negeri 3 Lubuklinggau in the 2018/2019 academic year. Two classes were chosen by random sampling, namely class X TKJ II as an experimental class and class X TKJ I as a control class. Data collection techniques using test techniques. Student test score data were analyzed using the t test. Based on the results of post-test data analysis of the experimental class and the control class with a 0.5% confidence level obtained tcount = 6.9 and ttable= 2.00 because tcount>ttable, means the average score of the experimental class is greater than the control class, then it was concluded that there was a significant effect of the Quantum Teaching learning model on physics learning outcomes of class X students of SMK Negeri 3 Lubuklinggau in the 2018/2019 academic year.


2018 ◽  
Vol 1 (2) ◽  
pp. 74-80
Author(s):  
Leo Charli ◽  
Ahmad Amin ◽  
Indah Pujiastuti

The purpose of the research was to apply the think pair share model in learning physics. The type of research was  a quasi-experimental design with a pre-test and post-test group. The population was all students of class VII which consisted of 3 classes and the total number was 95 students. The sample was taken randomly and the selected class was class VII.2 with total number 32 students. The data collection was a test technique that was analyzed using the t-test at significant level. Based on the result of t-test, the result of t-value (2.05)> t table (1.71), so that the physics learning outcomes using the Think Pair Share model was significantly achieved. The average of student learning outcome was 67.85 and the percentage of students who achieved standard minimum criteria was 81.25%. In conclusion, the implementation of the think pair share model was very appropriate in learning physic. Keywords: Think Pair Share, Learning Outcomes, Physics.


2020 ◽  
Vol 7 (2) ◽  
pp. 113-119
Author(s):  
Akhmad Darmawan

This study aims to determine the project-based learning-STEM model's effect on biology learning outcomes in growth and development material. The learning was carried out in class XII IPA students of SMA Negeri 1 Muncar in the 2018/2019 academic year. This type of research is quasi-experimental research. The instrument in this study was a test given in the experimental class and the control class. The data were analyzed using parametric statistical analysis. There is a difference in the average post-test learning outcomes of the experimental class (PjBL-STEM model) with the control class's post-test learning outcomes using the independent sample t-test. The results of the analysis show that Sig. (2-tailed) of 0.00 0.05, which can be interpreted that there is a significant difference in the average student learning outcomes between the PjBL-STEM model (experimental class) and the conventional model (control class). The average post-test score of the experimental class with the PjBL-STEM model was 87.50, while the average score in the Control class was 79.82, so that there was an increase in the value of 7.68 in the experimental class. The PjBL-STEM model's application to improve learning outcomes can be continued with other materials that have STEM characteristics.


2018 ◽  
Vol 1 (1) ◽  
pp. 51-58
Author(s):  
Dodik Mulyono ◽  
Lucy Asri Purwasi ◽  
Agusman Riyadi

This study aims to determine the completeness of the results of learning mathematics Class VIII SMP Negeri 8 Lubuklinggau. Having applied guided discovery method. The research method used in this research is a quasi experiment with population class VIII 191 students and as a sample is class VIII F 32 students are taken at random. Data collecting is done by the test technique in the form of essay.Data problem is analyzed using t-test . Based on the results of data analysis on tarap belief α = 0.05 can be concluded that the results of students studying class VIII SMP Negeri 8 Lubuklinggau Academic Year 2016/2017 after the average value of the final test of 81.27 and the percentage of complete students reached 82.14% Keywords: Guided Discovery, Learning Outcomes, Mathematics


2017 ◽  
Vol 5 (3) ◽  
pp. 133
Author(s):  
Nizar Nizar ◽  
Irwan Said ◽  
Suherman Suherman

The aim of this study is to compare the learning outcomes of student in SMA Negeri 8 Palu using the cooperative learning model between jigsaw and NHT (numbered head together) on the stoichiometry. This research using a quasi-experimental design with factorial 2 x 2. The population of this study is all student of class X SMA 8 Palu with academic year 2015/2016 which consists of four classes. The sample of this study consists of two classes, namely class XB with amount of 16 students (experimental class) and class XC with amount of 17 students (control class) which was determined by purposive sampling. Data was collected by using test instruments, namely an achievement test that contains the stoichiometry material. The examination of data was conducted by using statistical analysis t-test two sides and one side (right side) non-parametric or Mann-Whitney U test. The average score of the learning outcomes of student by using the jigsaw type was (78.00; SD = 13.63), and by using NHT type was (70.47; SD = 16.51). Based on statistical analysis of the hypothesis test for two sides, it was obtained a value of 0.195 Asymp sig (2-tailed) and was obtained a value 0.204 Exact Sig (1-tailed) of 0.204, both of datas were at the rejection area of H0 which was a significance value greater than 0.05 (P> 0.05). Therefore, it can be concluded that there was a difference in learning outcomes using the cooperative model jigsaw type with NHT type, furthermore the type of jigsaw better than the NHT on the learning outcomes of students of stoichiometry in class X SMA Negeri 8 Palu.


Author(s):  
Maria A. F. Mbari ◽  
Marianus Yufrinalis ◽  
Theresia Nona

This study aims to determine the effect of the use of inquiry learning methods on the learning outcomes of fifth grade students in science subjects of light traits in Catholic Elementary School Nita I. This research is a quasi-experimental study. The sample of this study was 39 students consisting of 20 VA students as the experimental class and 19 VB students as the control class. Learning outcomes tests and learning motivation questionnaire sheets were used to obtain data in this study, with a t-test performed to test hypotheses preceded by a prerequisite analysis test in the form of a normality test. The results of this study indicate that the implementation of the inquiry learning method has a positive and significant effect on the students’ learning outcomes. The group of students who took part in the learning with inquiry learning method obtained a better post test score which was equal to 76.25 compared to the group of students who followed conventional learning who obtained a post-test average score of 65.26.


2016 ◽  
Vol 5 (1) ◽  
pp. 50
Author(s):  
Nur Rohman

The objectives of this research are to investigate whether there is difference of influence student learning result after application of cooperative script learning model assisted mind map with direct instruction learning model on the subject of Program Linear class X of SMA Plus Al-Amanah Balongsumber Dander Bojonegoro in the academic year of 2014/2015. This study is a quasi-experimental study using a study design of post-test - only control design. The sampling technique using cluster random sampling technique. The sample in this research is class X-B as an experimental class and class X-C  as the control class. Data mathematics learning result obtained using the technique of tests, and the tests used in the form of an objective test. Data were analyzed by an independent comparative statistical t-test. Based on the research results, it was concluded that: there is a significant difference between students' mathematics learning result that learned through the cooperative scriptlearning model assisted mind map with the students that learned through direct instruction learning. This suggests there are differences in the effect of the cooperative script learning model assisted mind map with direct learning model mathematics instruction on learning result of students on the subject of Program Linear second semester of class X SMA Plus Al-Amanah Bojonegoro.


2018 ◽  
Vol 13 (1) ◽  
pp. 13
Author(s):  
Laili Niswatun Sani ◽  
Satutik Rahayu ◽  
Hikmawati Hikmawati

Penelitian ini bertujuan untuk mengetahui pengaruh model Direct Instruction dengan simulasi macromedia flash terhadap hasil belajar fisika siswa di SMAN 1 Kopang tahun akademik 2016/2017 tentang impuls dan momentum. Jenis penelitian ini adalah eksperimen dengan desain kelompok kontrol posttest only. Populasi dalam penelitian ini adalah seluruh siswa kelas XI SMAN 1 Kopang dengan jumlah siswa 83 tersebar ke dalam tiga kelas. Sampel penelitian ini adalah XI IPA 2 berjumlah 28 siswa sebagai kelas eksperimen dan XI IPA 1 sebanyak 27 siswa sebagai kelas kontrol yang diambil secara cluster random sampling. Hasil penelitian menunjukkan bahwa rata-rata kelas XI IPA 2 dan XI IPA 1 adalah 70,71 dan 62,04, secara statistik data hasil tes berdistribusi normal dan homogen. Hasil penelitian yang diperoleh adalah analisis dengan t-test polled varians, dan hasilnya menunjukkan thitung = 2,33 dan ttabel = 2,00 pada tingkat signifikan 5 %. Hipotesis nol Ho ditolak karena thitung > ttabel, sehingga dapat disimpulkan bahwa model pembelajaran Direct Instruction dengan simulasi macromedia flash berpengaruh terhadap hasil belajar fisika siswa di SMAN 1 Kopang tahun akademik 2016/2017. This research aimed to determine the influence of Direct Instruction model with macromedia flash simulation toward student’s physics learning outcomes at SMAN 1 Kopang academic year 2016/2017 in the impulse and momentum topic. This research type was experiment with posttest only control group design. The populations in this research were all students in XI grade SMAN 1 Kopang (83 students). The sampel of this research was XI IPA 2 (28 students) as experiment class and XI IPA 1 (27 students) as control class were taken by cluster random sampling. The results showed that the average grade XI IPA 2 and XI IPA 1 were 70,71 and 62,04, statistically the test data was normally distributed and homogeneous.The t-test polled varians was applied to obtain the study result. The results showed that tcount = 2,33 and ttable = 2,00 at significant level of  5 %. In conclusion, due to tcount >ttable, the direct instruction teaching model with macromedia flash simulation has influence toward the student’s physics learning outcomes at SMAN 1 Kopang academic year 2016/2017.


2017 ◽  
Vol 2 (4) ◽  
pp. 164 ◽  
Author(s):  
Roni Wahyuni ◽  
Hikmawati Hikmawati ◽  
Muhammad Taufik

This study is aimed todetermine the effect of  guided-inqury learning model combined with the experimental method on physics learning outcomes grade XI IPA in  SMAN 2 Mataram of academic year 2016/2017. This is quasi-experimental research with pretest and posttest control group design. The population is all students grade XI IPA in SMAN 2 Mataram and the sample is student class XI IPA-7 as the experimental group and class XI IPA-9 as the control one which is selected by purposive sampling. The data of physics outcomes learning is collected by using multiple-choice test. Average value obtained in experimental class is 77.00, while in control is 65.65. The highest N-gain value is in sub material elasticity properties of material, it is 51% in control  and 88% in experimental. Statistical used is t-test polled variance at significant level of 5% and the result obtained tcountis 6,27. This value is greater than ttable (ttable=1.993). It means that there is an influence of guided-inquiry learning model combined with the experimental method on physics learning outcomes grade XI IPA in SMAN 2 Mataram.


Sign in / Sign up

Export Citation Format

Share Document