scholarly journals CONCRETE COMPOSITION PROPERTIES MODIFIED BY POLYMER EMULSION

2020 ◽  
Vol 22 (1) ◽  
pp. 133-139
Author(s):  
E. E. Sabitov ◽  
D. S. Dusembinov ◽  
D. O. Bazarbayev
Keyword(s):  
Pore Space ◽  
Physical And Mechanical Properties ◽  
Polymer Emulsion ◽  
High Quality ◽  
Concrete Production ◽  
Pulsation Apparatus ◽  
Rotary Pulsation Apparatus ◽  
Cement Binder ◽  
Composition Properties

The paper deals with the quality of gas concrete by using a number of process technologies that can significantly improve the potential of the added components. The proposed technology for composite gas concrete production improves its physical-and-mechanical properties due to the use of a rotary-pulsation apparatus, which creates high-frequency vibrations accompanied by cavitation and produced a high-quality polymer emulsion and the aluminum powder. Due to high-quality saponification, the gasifier evenly distributes in the concrete paste structure and reacts with the cement binder, thereby creating a uniform pore space. And the polymer emulsion envelopes pores and improves the material hydrophobicity and strength.

Durability and Permanence in the Quality – Contemporary Parameters, Defining the Papers and Cardboards for Printing Art

2019 ◽  
Vol 3 (2) ◽  
Author(s):  
Denitsa Ivanova-Alexandrova ◽  
◽  
◽  
Keyword(s):  
Chemical Composition ◽  
Quality Parameters ◽  
High Quality ◽  
Graphic Art ◽  
Long Period ◽  
External Influences ◽  
Two Factors ◽  
Composition Properties ◽  
The Impact

The long lifecycle, also known as durability and the permanence / invariability in the quality of papers and cardbords for graphic art, are today the basic requirements, imposed by printed art in terms of high quality parameters. These two factors are a manifestation, depending on different internal chemical-composition properties of the paper consistency and external influences of the ambience. Longevity and permanence are perceived as a function of aging and are actually observed at a later point in time. It is important to clarify that they are terms with different contents where „durability” is perceived as the ability of the paper or cardboard to resist the impact of wear during use, and the „permanence” is the possibility of product to remain chemically and physically stable for a long period of time.

scholarly journals Effect of modifiers and mineral additives from industrial waste on the quality of aerated concrete products

Technobius ◽  
2021 ◽  
Vol 1 (4) ◽  
pp. 0010
Author(s):  
Yerlan Sabitov ◽  
Duman Dyussembinov ◽  
Daniyar Bazarbayev
Keyword(s):  
Fly Ash ◽  
Polyvinyl Acetate ◽  
Raw Materials ◽  
Capillary Suction ◽  
Pulsation Apparatus ◽  
Rotary Pulsation Apparatus ◽  
Aerated Concrete ◽  
The Given ◽  
Mineral Additives

The given article is devoted to research of influence of polymer modifiers and mineral additives on quality of composite aerated concrete products. When selecting the composition of composite aerated concrete local raw materials and components were used: portland cement, sand, aluminum powder, polyvinyl acetate, fly ash, post-alcoholic bard and whey of milk. Preliminary polyvinyl acetate was combined with binder mixing water at a temperature above 55ºC to obtain a readily soluble polymer emulsion. Dispersion was carried out with a rotary-pulsation apparatus at a pressure of 0.5-1.0 MPa and a rotor speed of ~1200 rpm. In the same apparatus the complex modifier was produced. The offered technology of production of a complex modifier seems to be the most effective for composite aerated concrete. It made it possible to reduce water absorption and capillary suction of composite aerated concrete by an average of 25% and 45%, respectively. Moreover, different combinations of fly ash, polymer and modifier made it possible to achieve optimal values of thermal conductivity, compressive strength and frost resistance of composite aerated concrete.

scholarly journals Study of the influence of paper parameters on quality rizographic printing

2020 ◽  
pp. 11-16
Author(s):  
V. S. Yudenkov ◽  
P. Y. Sulim
Keyword(s):  
Physical And Mechanical Properties ◽  
Digital Printing ◽  
Print Quality ◽  
Offset Printing ◽  
High Quality ◽  
Laser Printing ◽  
Printing Quality ◽  
Surface Microgeometry ◽  
The Creation

Creation of new digital technologies let automate the reproduction of text and graphic information, led to the creation and development of the digital printing. Digital printing is a technology for producing prints in the printer based on the original layout, created as corresponding codes with a computer. One of the technologies of digital printing is a computer-to-press and one of the devices in this direction is risograph. The risograph printing quality is worse than offset printing. The text is printing with medium sharpness and images remind photos in old newspapers and require special preparation. But risograph is the most profitable solution for small and medium circulations from 50 up to 1000 sheets. Wide usage of risograph printing in typographies demands increase performance of the equipment with the high print quality of digital images. To improve the quality of risographic printing, the creation of methods is required to form the initial indicators of the original layout (clarity, correct transmission of halftones, contrast). At the same time, the result of obtaining high-quality images obtained by printing on a risograph is affected by surface microgeometry and the physical and mechanical properties of paper. So, the optical density of the ink layer on the print is largely determined by the structure of the sections of paper, in particular, absorbency and porosity. To obtain high-quality images on prints, it is necessary not only to customize the original layout, but also to select paper with such characteristics that would allow you to get the best result when printing on a risograph. Since the risograph occupies an intermediate place in quality between copying equipment and laser printing, a laser print is taken as the standard for print quality. And one of the tasks of the quality of risographic prints is to increase it to the quality of laser printing.

Influence of technology parameters of free-cutting steel continuous casting on the billet internal structure

2020 ◽  
Vol 76 (2) ◽  
pp. 139-142
Author(s):  
A. T. Kunakbaeva ◽  
A. M. Stolyarov ◽  
M. V. Potapova
Keyword(s):  
Regression Analysis ◽  
Continuous Casting ◽  
Internal Structure ◽  
Sulfur Content ◽  
Manganese Content ◽  
High Quality ◽  
Correlation And Regression Analysis ◽  
Cutting Steel ◽  
Continuously Cast

Free-cutting steel gains specific working properties thanks to the high content of sulfur and phosphorus. These elements, especially sulfur, have a rather high tendency to segregation. Therefore, segregation defects in free-cutting steel continuously cast billets can be significantly developed. The aim of the work was to study the influence of the chemical composition of freecutting steel and casting technological parameters on the quality of the macrostructure of continuously cast billets. A metallographic assessment of the internal structure of cast metal made of free-cutting steel and data processing by application of correlation and regression analysis were the research methods. The array of production data of 43 heats of free-cutting steel of grade A12 was studied. Steel casting on a five-strand radial type continuous casting machine was carried out by various methods of metal pouring from tundish into the molds. Metal of 19 heats was poured with an open stream, and 24 heats – by a closed stream through submerged nozzles with a vertical hole. High-quality billets had a cross-sectional size of 150×150 mm. The macrostructure of high-quality square billets made of free-cutting steel of A12 grade is characterized by the presence of central porosity, axial segregation and peripheral point contamination, the degree of development of which was in the range from 1.5 to 2.0 points, segregation cracks and strips – about 1.0 points. In the course of casting with an open stream, almost all of these defects are more developed comparing with the casting by a closed stream. As a result of correlation and regression analysis, linear dependences of the development degree of segregation cracks and strips both axial and angular on the sulfur content in steel and on the ratio of manganese content to sulfur content were established. The degree of these defects development increases with growing of sulfur content in steel of A12 grade. These defects had especially strong development when sulfur content in steel was of more than 0.10%. To improve the quality of cast metal, it is necessary to have the ratio of the manganese content to the sulfur content in the metal more than eight.

Experience of clinical testing of personal telemedicine system ‘Obereg’ for remote monitoring of patients in intensive care units

2020 ◽  
pp. 52-58 ◽  
Author(s):  
A. A. Eryomenko ◽  
N. V. Rostunova ◽  
S. A. Budagyan ◽  
V. V. Stets
Keyword(s):  
Intensive Care ◽  
Intensive Care Units ◽  
Remote Monitoring ◽  
Clinical Testing ◽  
Transportation Of Patients ◽  
High Quality ◽  
Telemedicine System ◽  
Accuracy Of Measurements ◽  
Hospital Equipment

The experience of clinical testing of the personal telemedicine system ‘Obereg’ for remote monitoring of patients at the intensive care units of leading Russian clinics is described. The high quality of communication with the remote receiving devices of doctors, the accuracy of measurements, resistance to interference from various hospital equipment and the absence of its own impact on such equipment were confirmed. There are significant advantages compared to stationary patient monitors, in particular, for intra and out-of-hospital transportation of patients.

METHODOLOGICAL ASPECTS OF VISUALIZATION OF CORONARY ARTERIES WITH TRANSTHORACIC ECHOCARDIOGRAPHY

2018 ◽  
pp. 26-35
Author(s):  
Z. A. Agaeva ◽  
K. B. Baghdasaryan
Keyword(s):  
Blood Flow ◽  
Coronary Blood Flow ◽  
Coronary Arteries ◽  
Transthoracic Echocardiography ◽  
Second Harmonic ◽  
Anatomic Reconstruction ◽  
High Quality ◽  
Acoustic Window ◽  
Methodological Aspects

The transthoracic echocardiography made by multifrequency probes with support of the mode of the second harmonic imaging, is a competitive method for visualization of the main coronary arteries and allows to estimate coronary blood flow with high quality. Of course, the method has considerable restrictions, most important of which is the low spatial resolution of a method, due to small acoustic window. Because of this the transthoracic visualization of coronary arteries perhaps will not become the leading method of anatomic reconstruction of separately taken coronary artery and especially all coronary arteries system. However uniqueness and indisputable advantage of this method is an opportunity to noninvasively estimate a coronary blood flow both once, and in dynamics.

Estimates on poverty in Russia and the additional measures to reduce it at the regional level

2020 ◽  
Vol 18 (4) ◽  
pp. 739-752 ◽  
Author(s):  
R.M. Sadykov
Keyword(s):  
Poverty Rate ◽  
Regional Level ◽  
Living Standards ◽  
Standard Of Living ◽  
High Quality ◽  
Social Standard ◽  
Republic Of Bashkortostan ◽  
The Republic ◽  
Sociological Studies

Subject. This article deals with the issues of social justice and a high quality of life, creating favorable economic and social conditions. Objectives. The article aims to assess the rate and changes in poverty in Russia and the Republic of Bashkortostan and develop complementary measures to reduce it. Methods. For the study, I used the methods of logical, comparative, economic and statistical analyses, the results of sociological studies, and official statistics. Results. The article highlights additional measures to reduce poverty in the region, including the establishment of a minimum social standard of living in each particular region that determines the poverty rate. Conclusions. Various factors, such as economic sanctions, economic slowdowns, territorial and regional imbalances, lead to living standards decline and poverty rise.

SCIENTIFIC BASIS OF POSTGRADUATE TRAINING FOR OFFICER WORKING ETHNIC AFFAIRS USING STATE BUDGET IN THE PERIOD OF 2018 – 2025

2017 ◽  
Author(s):  
La Duc Minh ◽  
Nguyen Thi Hao ◽  
Vu Thi Thuy
Keyword(s):  
Economic Development ◽  
Ethnic Groups ◽  
Human Resource ◽  
Postgraduate Training ◽  
Scientific Basis ◽  
National Defense ◽  
High Quality ◽  
State Budget ◽  
International Integration

Ethnic affairs play an important role in socio of ethnic groups’ solidarity, assurance of security and national defense stability. In -economic development, maintenanceorder to improve the quality of ethnic affairs, it is practical to carry out postgraduate training of officer implementing ethnic affairs using state budget with the aim of encouraging and enhancing officer quality to satisfy high-quality human resource in international integration.

Удобрение перца сладкого

2018 ◽  
Author(s):  
V.A. Borisov ◽  
A.M. Menshikh ◽  
V.S. Sosnov ◽  
G.F. Monakhos
Keyword(s):  
Drip Irrigation ◽  
Sweet Pepper ◽  
Water Soluble ◽  
Mineral Fertilizers ◽  
High Quality ◽  
Organic Mineral ◽  
Soluble Fertilizer

Показано действие минеральных удобрений, микрокристаллического комплексного водорастворимого удобрения «Мастер» и органоминерального наноудобрения с ростостимулирующей активностью «Арксойл» при капельном орошении на урожайность и качество сладкого перца нового гибрида F1 Темп. Сочетание основного удобрения с листовой и корневой подкормками позволяет получить до 65 т/га плодов перца высокого качества.The action of mineral fertilizers, microcrystalline complex water soluble fertilizer Master and organic mineral nano-fertilizer with growth-stimulating activity Arksoil under drip irrigation on the productivity and quality of sweet pepper of the new hybrid F1 Temp is shown. The combination of basic fertilizer with leaf and root fertilizing allows to obtain up to 65 t/ha of pepper fruits of high quality.

Child Diagnosis of Autism - How It Can Change the Family Life

2017 ◽  
Vol 5 (1) ◽  
pp. 498
Author(s):  
Maria Stănescu
Keyword(s):  
Early Intervention ◽  
Family Life ◽  
Social Life ◽  
Decisive Role ◽  
Autistic Children ◽  
Child Behaviors ◽  
High Quality ◽  
Child Diagnosis ◽  
The Family

The article is about the role of the family in the education and formation of children and, especially, in the life and development of autistic children. It describes the problems their family is facing and the need for counseling to parents with autistic children. The reaction to finding the diagnosis of autism varies from one family to another and may encounter a large variety: from disbelief, anger, guilt, helplessness, devastation, surprise, or even rejection of the child, to understanding and relief when finally the parents have an explanation for their child behaviors. Early intervention is important in psychological sustaining of the parent, as parent involvement in the recovery of the child with autism has a determinant role in his development and in ensuring a high quality of life of the child and the life of the hole family. The response to a child's autism diagnosis varies from one family to another. The family goes through a variety of disbelief, anger, guilt, helplessness, devastation, surprise, or even rejection of the child, to understanding and relief. Early intervention is very important in the psychological support of the parent. Because any change disturbs the family equilibrium. A diagnosis of autism changes not only the life of the diagnosed child, but also the life of family members. All the resources are focused on the need of the child. Although each parent is different, after diagnosing the child with autism, all parents are overwhelmed by confusion, shock and denial. Parents' feelings can be influenced by how their children's situation affects different aspects of life - it has an impact on service, on social life and all their personal life. If we look at the family as a system and when a disturbing factor appears, all parts of the system are affected. The involvement of parents in the recovery of the child with autism has a decisive role in its development and in ensuring a high quality of child's life and family life.

Sign in / Sign up

Export Citation Format

Share Document