scholarly journals A Rhodamine-Based Probe for Detection of Nerve Agents Simulants

2021 ◽  
Author(s):  
Liang Zong ◽  
Jingning Zhang ◽  
Dan Li ◽  
Shaohui Sui ◽  
Yanhua Xiao ◽  
...  
Keyword(s):  
Rhodamine B ◽  
Structural Changes ◽  
Color Change ◽  
Limit Of Detection ◽  
Fluorescence Emission ◽  
Nerve Agents ◽  
Nerve Agent ◽  
Fluorescent Detection ◽  
Dependent Manner ◽  
Color Changes

In this paper, a rhodamine-based fluorescent and chromogenic probe, N-(Rhodamine B)-lactam-2-aminobenzyl alcohol (RB-AB), was designed to detect nerve agent simulants. We firstly synthesized RB-AB probe by using rhodamine B and 2-aminobenzyl alcohol as main materials. Secondly, the RB-AB probe was applied to evaluate its ability to detect two nerve agent simulants, diethyl chloride phosphate (DCP) and methyl ethyl chloride phosphate (MECP). It was assumed that RB-AB could react with the nerve agent simulants through the benzyl alcohol group and then undergoes structural changes. As a result, the RB-AB detection solution shows fluorescent and color changes during detecting process. The maximum intensity of fluorescence emission increases with the addition of DCP or MECP in a dose-dependent manner. The LOD (limit of detection) of the probe is about 20 ppm for DCP. Moreover, a significant pink color change can be observed in the RB-AB system within a few seconds when detecting DCP or MECP. In conclusion, a rhodamine-based molecule as a fluorescent and chromogenic probe was developed for detecting nerve agent simulants. The RB-AB probe solutions can give rapid and off-on type optical changes including color and fluorescence when reacting with DCP or MECP. We anticipate that RB-AB probe can be used as a helpful tool for visual and fluorescent detection of nerve agents when meeting with terrorist attacks involving with these agents so that effective measures could be promptly taken to cope with the crises.

scholarly journals Chromo-Fluorogenic Detection of Soman and Its Simulant by Thiourea-Based Rhodamine Probe

Molecules ◽  
2019 ◽  
Vol 24 (5) ◽  
pp. 827 ◽  
Author(s):  
Shengsong Li ◽  
Yongchao Zheng ◽  
Weiqiang Chen ◽  
Meiling Zheng ◽  
He Zheng ◽  
...  
Keyword(s):  
Detection Limit ◽  
Dft Calculations ◽  
Gas Phase ◽  
Rhodamine B ◽  
Organophosphorus Compounds ◽  
Nerve Agent ◽  
Color Changes ◽  
Highly Sensitive ◽  
Td Dft ◽  
Membered Heterocycle

Here, we introduced a novel thiourea-based rhodamine compound as a chromo-fluorogenic indicator of nerve agent Soman and its simulant diethyl chlorophosphate (DCP). The synthesized probe N-(rhodamine B)-lactam-2-(4-cyanophenyl) thiourea (RB-CT), which has a rhodamine core linked by a cyanophenyl thiosemicarbazide group, enabled a rapidly and highly sensitive response to DCP with clear fluorescence and color changes. The detection limit was as low as 2 × 10−6 M. The sensing mechanism showed that opening of the spirolactam ring following the phosphorylation of thiosemicarbazides group formed a seven-membered heterocycle adduct, according to MS analysis and TD-DFT calculations. RB-CT exhibited high detecting selectivity for DCP, among other organophosphorus compounds. Moreover, two test kits were employed and successfully used to detect real nerve agent Soman in liquid and gas phase.

Green Synthesis and Spectroscopic Studies of Ag-rGO Nanocomposites for Highly Selective Mercury (II) Sensing

2018 ◽  
Vol 9 (1) ◽  
pp. 101-108 ◽  
Author(s):  
Shubhangi J. Mane-Gavade ◽  
Sandip R. Sabale ◽  
Xiao-Ying Yu ◽  
Gurunath H. Nikam ◽  
Bhaskar V. Tamhankar
Keyword(s):  
Green Synthesis ◽  
Color Change ◽  
Limit Of Detection ◽  
Aqueous Media ◽  
Suitable Condition ◽  
Cost Effective ◽  
Spectroscopic Studies ◽  
Calibration Plot ◽  
First Time

Introduction: Herein we report the green synthesis and characterization of silverreduced graphene oxide nanocomposites (Ag-rGO) using Acacia nilotica gum for the first time. Experimental: We demonstrate the Hg2+ ions sensing ability of the Ag-rGO nanocomposites form aqueous medium. The developed colorimetric sensor method is simple, fast and selective for the detection of Hg2+ ions in aqueous media in presence of other associated ions. A significant color change was noticed with naked eye upon Hg2+ addition. The color change was not observed for cations including Sr2+, Ni2+, Cd2+, Pb2+, Mg2+, Ca2+, Fe2+, Ba2+ and Mn2+indicating that only Hg2+ shows a strong interaction with Ag-rGO nanocomposites. Under the most suitable condition, the calibration plot (A0-A) against concentration of Hg2+ was linear in the range of 0.1-1.0 ppm with a correlation coefficient (R2) value 0.9998. Results & Conclusion The concentration of Hg2+ was quantitatively determined with the Limit of Detection (LOD) of 0.85 ppm. Also, this method shows excellent selectivity towards Hg2+ over nine other cations tested. Moreover, the method offers a new cost effective, rapid and simple approach for the detection of Hg2+ in water samples.

scholarly journals Investigation of the selective color-changing mechanism of Dynastes tityus beetle (Coleoptera: Scarabaeidae)

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jiyu Sun ◽  
Wei Wu ◽  
Limei Tian ◽  
Wei Li ◽  
Fang Zhang ◽  
...  
Keyword(s):  
Focused Ion Beam ◽  
Color Change ◽  
Incidence Angle ◽  
Ion Beam ◽  
Three Dimensional ◽  
Water Infiltration ◽  
Photonic Materials ◽  
Local Color ◽  
Water Contact ◽  
Color Changes

AbstractNot only does the Dynastes tityus beetle display a reversible color change controlled by differences in humidity, but also, the elytron scale can change color from yellow-green to deep-brown in specified shapes. The results obtained by focused ion beam-scanning electron microscopy (FIB-SEM), show that the epicuticle (EPI) is a permeable layer, and the exocuticle (EXO) is a three-dimensional photonic crystal. To investigate the mechanism of the reversible color change, experiments were conducted to determine the water contact angle, surface chemical composition, and optical reflectance, and the reflective spectrum was simulated. The water on the surface began to permeate into the elytron via the surface elemental composition and channels in the EPI. A structural unit (SU) in the EXO allows local color changes in varied shapes. The reflectance of both yellow-green and deep-brown elytra increases as the incidence angle increases from 0° to 60°. The microstructure and changes in the refractive index are the main factors that influence the process of reversible color change. According to the simulation, the lower reflectance causing the color change to deep-brown results from water infiltration, which increases light absorption. Meanwhile, the waxy layer has no effect on the reflection of light. This study lays the foundation to manufacture engineered photonic materials that undergo controllable changes in iridescent color.

scholarly journals A Compact Detection Platform Based on Gradient Guided-Mode Resonance for Colorimetric and Fluorescence Liquid Assay Detection

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2797
Author(s):  
Jing-Jhong Gao ◽  
Ching-Wei Chiu ◽  
Kuo-Hsing Wen ◽  
Cheng-Sheng Huang
Keyword(s):  
Limit Of Detection ◽  
Detection System ◽  
Fluorescence Emission ◽  
Assay Sensitivity ◽  
Detection Range ◽  
Current Form ◽  
Guided Mode ◽  
Spectral Detection ◽  
Guided Mode Resonance ◽  
Colorimetric Assays

This paper presents a compact spectral detection system for common fluorescent and colorimetric assays. This system includes a gradient grating period guided-mode resonance (GGP-GMR) filter and charge-coupled device. In its current form, the GGP-GMR filter, which has a size of less than 2.5 mm, can achieve a spectral detection range of 500–700 nm. Through the direct measurement of the fluorescence emission, the proposed system was demonstrated to detect both the peak wavelength and its corresponding intensity. One fluorescent assay (albumin) and two colorimetric assays (albumin and creatinine) were performed to demonstrate the practical application of the proposed system for quantifying common liquid assays. The results of our system exhibited suitable agreement with those of a commercial spectrometer in terms of the assay sensitivity and limit of detection (LOD). With the proposed system, the fluorescent albumin, colorimetric albumin, and colorimetric creatinine assays achieved LODs of 40.99 and 398 and 25.49 mg/L, respectively. For a wide selection of biomolecules in point-of-care applications, the spectral detection range achieved by the GGP-GMR filter can be further extended and the simple and compact optical path configuration can be integrated with a lab-on-a-chip system.

scholarly journals Characterization of Food Packaging Films with Blackcurrant Fruit Waste as a Source of Antioxidant and Color Sensing Intelligent Material

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2569
Author(s):  
Mia Kurek ◽  
Nasreddine Benbettaieb ◽  
Mario Ščetar ◽  
Eliot Chaudy ◽  
Maja Repajić ◽  
...  
Keyword(s):  
Food Packaging ◽  
Water Solubility ◽  
Color Change ◽  
Chitosan Film ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Color Changes ◽  
Insoluble Particles ◽  
Polymer Stability ◽  
Food Packaging Films

Chitosan and pectin films were enriched with blackcurrant pomace powder (10 and 20% (w/w)), as bio-based material, to minimize food production losses and to increase the functional properties of produced films aimed at food coatings and wrappers. Water vapor permeability of active films increased up to 25%, moisture content for 27% in pectin-based ones, but water solubility was not significantly modified. Mechanical properties (tensile strength, elongation at break and Young’s modulus) were mainly decreased due to the residual insoluble particles present in blackcurrant waste. FTIR analysis showed no significant changes between the film samples. The degradation temperatures, determined by DSC, were reduced by 18 °C for chitosan-based samples and of 32 °C lower for the pectin-based samples with blackcurrant powder, indicating a disturbance in polymer stability. The antioxidant activity of active films was increased up to 30-fold. Lightness and redness of dry films significantly changed depending on the polymer type. Significant color changes, especially in chitosan film formulations, were observed after exposure to different pH buffers. This effect is further explored in formulations that were used as color change indicators for intelligent biopackaging.

Influence of Hydrogen Peroxide Bleaching Gels on Color, Opacity, and Fluorescence of Composite Resins

2012 ◽  
Vol 37 (5) ◽  
pp. 526-531 ◽  
Author(s):  
CRG Torres ◽  
CF Ribeiro ◽  
E Bresciani ◽  
AB Borges
Keyword(s):  
Hydrogen Peroxide ◽  
Composite Resin ◽  
Color Change ◽  
Composite Resins ◽  
Control Group ◽  
Peroxide Bleaching ◽  
Color Changes ◽  
Tukey Test ◽  
Bleaching Gels ◽  
Bleaching Treatment

SUMMARY The aim of the present study was to evaluate the effect of 20% and 35% hydrogen peroxide bleaching gels on the color, opacity, and fluorescence of composite resins. Seven composite resin brands were tested and 30 specimens, 3-mm in diameter and 2-mm thick, of each material were fabricated, for a total of 210 specimens. The specimens of each tested material were divided into three subgroups (n=10) according to the bleaching therapy tested: 20% hydrogen peroxide gel, 35% hydroxide peroxide gel, and the control group. The baseline color, opacity, and fluorescence were assessed by spectrophotometry. Four 30-minute bleaching gel applications, two hours in total, were performed. The control group did not receive bleaching treatment and was stored in deionized water. Final assessments were performed, and data were analyzed by two-way analysis of variance and Tukey tests (p<0.05). Color changes were significant for different tested bleaching therapies (p<0.0001), with the greatest color change observed for 35% hydrogen peroxide gel. No difference in opacity was detected for all analyzed parameters. Fluorescence changes were influenced by composite resin brand (p<0.0001) and bleaching therapy (p=0.0016) used. No significant differences in fluorescence between different bleaching gel concentrations were detected by Tukey test. The greatest fluorescence alteration was detected on the brand Z350. It was concluded that 35% hydrogen peroxide bleaching gel generated the greatest color change among all evaluated materials. No statistical opacity changes were detected for all tested variables, and significant fluorescence changes were dependent on the material and bleaching therapy, regardless of the gel concentration.

Abstract 201: Generation of Photoactivatable apoA I to Study HDL Transport in vivo Reveals Impaired HDL Recirculation in a Murine Model of Psoriasis

2017 ◽  
Vol 37 (suppl_1) ◽  
Author(s):  
Li-Hao Huang ◽  
Bernd H Zinselmeyer ◽  
Chih-Hao Chang ◽  
Brian T Saunders ◽  
Brian S Kim ◽  
...  
Keyword(s):  
T Cell ◽  
Murine Model ◽  
Structural Changes ◽  
Cardiovascular Outcomes ◽  
Dependent Manner ◽  
Cardiovascular Comorbidity ◽  
Collagen Density

HDL is cardioprotective, but plasma HDL levels do not necessarily predict cardiovascular outcomes. The major HDL-associated protein apoA-I picks up its cholesterol from cells within extravascular compartments to return it to plasma and then bile. Yet, tools are lacking to quantify the important step of HDL transit through extravascular spaces. Here, we developed recombinant photoactivatable apoA-I to quantify endogenous HDL recirculation. Using the tool, we studied HDL passage through skin in healthy mice versus those with experimental psoriasis, wherein collagen density increased in the skin in a CD4 + T cell-dependent manner. In control mice, photoactivated HDL mobilized to plasma within 2 h but was retained in collagen-enriched skin of mice with psoriasis. These data suggest that cardiovascular comorbidity in psoriasis might be linked to T cell-mediated structural changes in skin that impedes systemic recirculation of HDL. This new tool is likely to find wide application in HDL research.

Comparison of the color and weight change in Paulownia tomentosa and Pinus koraiensis wood heat-treated in hot oil and hot air

BioResources ◽  
2021 ◽  
Vol 16 (3) ◽  
pp. 5574-5585
Author(s):  
Intan Fajar Suri ◽  
Jong Ho Kim ◽  
Byantara Darsan Purusatama ◽  
Go Un Yang ◽  
Denni Prasetia ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Color Change ◽  
Treated Wood ◽  
Pinus Koraiensis ◽  
Weight Changes ◽  
Paulownia Tomentosa ◽  
Wood Color ◽  
Color Changes ◽  
Hot Air ◽  
Heat Treated

Color changes were tested and compared for heat-treated Paulownia tomentosa and Pinus koraiensis wood treated with hot oil or hot air for further utilization of these species. Hot oil and hot air treatments were conducted at 180, 200, and 220 °C for 1, 2, and 3 h. Heat-treated wood color changes were determined using the CIE-Lab color system. Weight changes of the wood before and after heat treatment were also determined. The weight of the oil heat-treated wood increased considerably but it decreased in air heat-treated wood. The oil heat-treated samples showed a greater decrease in lightness (L*) than air heat-treated samples. A significant change in L* was observed in Paulownia tomentosa. The red/green chromaticity (a*) of both wood samples increased at 180 and 200 °C and slightly decreased at 220 °C. The yellow/blue chromaticity (b*) in both wood samples increased at 180 °C, but it rapidly decreased with increasing treatment durations at 200 and 220 °C. The overall color change (ΔE*) in both heat treatments increased with increasing temperature, being higher in Paulownia tomentosa than in Pinus koraiensis. In conclusion, oil heat treatment reduced treatment duration and was a more effective method than air heat treatment in improving wood color.

scholarly journals Analysis of the Influence of Food Colorings in Esthetic Orthodontic Elastomeric Ligatures

2016 ◽  
Vol 10 (1) ◽  
pp. 516-521 ◽  
Author(s):  
Vanessa Dias da Silva ◽  
Eduardo Martinelli S de Lima ◽  
Caroline Dias ◽  
Leandro Berni Osório
Keyword(s):  
Color Change ◽  
Black Tea ◽  
Control Group ◽  
Distilled Water ◽  
Water Control ◽  
Color Changes ◽  
Influence Of Food

Proposition: The purpose of this study was to evaluate in vitro the color changes of esthetic orthodontic elastomeric ligatures of different shades when exposed to four food colorings commonly found in the diet of patients. Materials and Methods: The sample consisted of esthetic orthodontic elastomeric ligatures in the colors pearl, pearl blue, pearl white and colorless, which were immersed for 72 hours in five different solutions: distilled water (control group), coffee, tea, Coca-Cola ® and wine. The color changes of the esthetic orthodontic elastomeric ligatures were measured with the aid of a spectrophotometer, at T1 - as provided by the manufacturer; and T2 - after colorings process. Results: The results indicated that the esthetic orthodontic elastomeric ligatures of all initial hues are susceptible to pigmentation. Among the evaluated colors, all changed the finished look and the color of the samples tested. In ascending order, the color of the samples was as follows: distilled water, Coca-Cola®, black tea, wine and coffee. Conclusion: The substances that have a greater potential for pigmentation in esthetic orthodontic elastomeric ligatures were black tea, wine and coffee, respectively. All shades of esthetic orthodontic elastomeric ligatures are susceptible to color change.

scholarly journals Streptavidin-conjugated gold nanoclusters as ultrasensitive fluorescent sensors for early diagnosis of HIV infection

2018 ◽  
Vol 4 (11) ◽  
pp. eaar6280 ◽  
Author(s):  
Aditya Dileep Kurdekar ◽  
L. A. Avinash Chunduri ◽  
C. Sai Manohar ◽  
Mohan Kumar Haleyurgirisetty ◽  
Indira K. Hewlett ◽  
...  
Keyword(s):  
Hiv Infection ◽  
Limit Of Detection ◽  
Gold Nanoclusters ◽  
Enzyme Linked Immunosorbent Assay ◽  
Dependent Manner ◽  
Metal Nanoclusters ◽  
Detection Range ◽  
In Silico Studies ◽  
P24 Antigen ◽  
Hiv 1

We have engineered streptavidin-labeled fluorescent gold nanoclusters to develop a gold nanocluster immunoassay (GNCIA) for the early and sensitive detection of HIV infection. We performed computational simulations on the mechanism of interaction between the nanoclusters and the streptavidin protein via in silico studies and showed that gold nanoclusters enhance the binding to the protein, by enhancing interaction between the Au atoms and the specific active site residues, compared to other metal nanoclusters. We also evaluated the role of glutathione conjugation in binding to gold nanoclusters with streptavidin. As proof of concept, GNCIA achieved a sensitivity limit of detection of HIV-1 p24 antigen in clinical specimens of 5 pg/ml, with a detection range up to1000 pg/ml in a linear dose-dependent manner. GNCIA demonstrated a threefold higher sensitivity and specificity compared to enzyme-linked immunosorbent assay for the detection of HIV p24 antigen. The specificity of the immunoassay was 100% when tested with plasma samples negative for HIV-1 p24 antigen and positive for viruses such as hepatitis B virus, hepatitis C virus, and dengue. GNCIA could be developed into a universal labeling technology using the relevant capture and detector antibodies for the specific detection of antigens of various pathogens in the future.

Sign in / Sign up

Export Citation Format

Share Document