scholarly journals Two-tier integral indicator system for controlling the material flow heat-power engineering objects.

2018 ◽  
Vol 2 (4) ◽  
pp. 80-87
Author(s):  
Petrо Kulikov ◽  
Alla Bielova ◽  
Nataliia Zhuravska

The essence and the possibility of creation and application of a compliant two-level integrated indicator control on the technology of non-reagent water preparation in the heating systems of heat energy objects of the building industry is substantiated. Proposed scientific principles concerning development of indicator control system. It is established that quantitative characterization of components of material flows of heat systems as a measure of their additive functions and response to changes in catalytic activity is determined by their subordinated indicator control mechanism. Two-level control involves: 1) the relationship between the device for receiving magnetized water (parameters) and the heating system (specific indicators and their indices); 2) the relationship between the specific indicators characterizing the state of material flows of the heating systems and the trends of changes in material flows under the conditions of the action of electromagnetic fields on them - the hydrochemical, electrophysical and thermophysical potentials. Indicator control system provides engineering-ecological aspects of non-reagent water preparation of systems of heat energy objects of the building industry.

2021 ◽  
Vol 14 (1) ◽  
pp. 58-67
Author(s):  
Sergey Polyakov ◽  
V. Akimov ◽  
A. Polukazakov ◽  
Vladimir Zolnikov ◽  
P. Enin

The article deals with the issues of modeling and management of life support systems of a residential building. The resulting model of the liquid level in the tank allows you to establish the relationship between the level and the flow rate of the liquid. The results of the selection and justification of the fluid level control structure are presented. An algorithm that implements the operation of a virtual object is given. The structure of the automatic control system (ACS) of the liquid level is technically implemented in an open type. The results confirming the achievability of the proposed structural changes are obtained. The results of experimental studies are presented. The choice and justification of the method of controlling the heating system and the liquid level in the tank are considered. Programs for managing subsystems of a residential building in Assembly language, C++, and ladder diagrams are presented. A model for controlling the liquid level in a Multisim environment is proposed.


2021 ◽  
Vol 92 ◽  
pp. 79-93
Author(s):  
N. G. Topolsky ◽  
◽  
S. Y. Butuzov ◽  
V. Y. Vilisov ◽  
V. L. Semikov ◽  
...  

Introduction. It is important to have models that adequately describe the relationship between the integral indicators of the functioning of the system with the particular indicators of the lower levels of management in complex control systems, in particular in RSChS. Traditional approaches based on normative models often turn out to be untenable due to the impossibility of covering all aspects of the functioning of such systems, as well as due to the high variability of the environment and the values of the set of target indicators. Recently, adaptive machine-learning models have proven to be productive, allowing build stable and adequate models, one of the variants of which is artificial neural networks (ANN), based on the solution of inverse problems using expert estimates. The relevance of the study lies in the development of compact models that allow assessing the effectiveness of the functioning of complex multi-level control systems (RSChS) in emergency situations, developing according to complex scenarios, in which emergencies of various types can occur simultaneously. Goals and objectives. The purpose of the article is to build and test the technology for creating compact models that are adequate to the system of indicators of the functioning of hierarchically organized control systems. This goal gives rise to the task of choosing tools for constructing the necessary models and sources of initial data. Methods. The research tools include methods for analyzing hierarchical systems, mathematical statistics, machine learning methods of ANN, simulation modeling, expert assessment methods, software systems for processing statistical data. The research is based on materials from domestic and foreign publications. Results and discussion. The proposed technology for constructing a neural network model of the effectiveness of the functioning of complex hierarchical systems provides a basis for constructing dynamic models of this type, which make it possible to distribute limited financial and other resources during the operation of the system according to a complex scenario of emergency response. Conclusion. The paper presents the results of solving the problem of constructing an ANN and its corresponding nonlinear function, reflecting the relationship between the performance indicators of the lower levels of the hierarchical control system (RSChS) with the upper level. The neural network model constructed in this way can be used in the decision support system for resource management in the context of complex scenarios for the development of emergency situations. The use of expert assessments as an information basis makes it possible to take into account numerous target indicators, which are extremely difficult to take into account in other ways. Keywords: emergency situations, hierarchical control system, efficiency, artificial neural network, expert assessments


2021 ◽  
Author(s):  
Sergey Polyakov

The article deals with the issues of modeling and management of residential building heating systems. The results of the analysis and selection of control system parameters are presented. A vir-tual object of the heating system of the residential building infrastructure is proposed in the light of the requirements of the «Smart City». The results confirming the achievability of the proposed structural changes are obtained.


2019 ◽  
Vol 2 (1) ◽  
pp. 29-39 ◽  
Author(s):  
S. G. Konesev ◽  
P. A. Khlyupin

Introduction: the systems of thermal effects on thermo-dependent, viscous and highly viscous liquids under conditions of the Arctic and the Extreme North are considered. Low efficiency and danger of heating systems based on burned hydrocarbons, heated liquids and steam are shown. Electrothermal heating systems used to maintain thermo-dependent fluids in a fluid state are considered. The evaluation of the effectiveness of the application of the most common electrothermal system — heating cables (tapes). The most effective electrothermal system based on induction technologies has been determined. Materials and methods: considered methods of thermal exposure to maintain the fluid properties of thermo-dependent fluids at low extreme temperatures. Results: presents an induction heating system and options for its implementation in the Extreme North and the Arctic. Conclusions: induction heating system to minimize loss of product quality, improve the system performance under changing process conditions, eliminate fire product, to reduce the influence of the human factor.


2021 ◽  
Vol 11 (14) ◽  
pp. 6254
Author(s):  
Elena G. Dascalaki ◽  
Constantinos A. Balaras

In an effort to reduce the operational cost of their dwellings, occupants may even have to sacrifice their indoor thermal comfort conditions. Following the economic recession in Greece over recent years, homeowners have been forced to adapt their practices by shortening heating hours, lowering the indoor thermostat settings, isolating spaces that are not heated or even turning off their central heating system and using alternative local heating systems. This paper presents the results from over 100 occupant surveys using questionnaires and walk-through energy audits in Hellenic households that documented how occupants operated the heating systems in their dwellings and the resulting indoor thermal comfort conditions and actual energy use. The results indicate that the perceived winter thermal comfort conditions were satisfactory in only half of the dwellings, since the actual operating space heating periods averaged only 5 h (compared with the assumed 18 h in standard conditions), while less than half heated their entire dwellings and only a fifth maintained an indoor setpoint temperature of 20 °C, corresponding to standard comfort conditions. Mainstream energy conservation measures include system maintenance, switching to more efficient systems, reducing heat losses and installing controls. This information is then used to derive empirical adaptation factors for bridging the gap between the calculated and actual energy use, making more realistic estimates of the expected energy savings following building renovations, setting prudent targets for energy efficiency and developing effective plans toward a decarbonized building stock.


Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3218
Author(s):  
Pedro Durán ◽  
Herena Torio ◽  
Patrik Schönfeldt ◽  
Peter Klement ◽  
Benedikt Hanke ◽  
...  

There are 1454 district heating systems in Germany. Most of them are fossil based and with high temperature levels, which is neither efficient nor sustainable and needs to be changed for reaching the 2050 climate goals. In this paper, we present a case study for transforming a high to low temperature district heating system which is more suitable for renewable energy supply. With the Carnot Toolbox, a dynamic model of a potential district heating system is simulated and then transformed to a low temperature supply. A sensitivity analysis is carried out to see the system performance in case space constrains restrict the transformation. Finally, an economic comparison is performed. Results show that it is technically possible to perform the transformation until a very low temperature system. The use of decentralized renewable sources, decentralized heat storage tanks and the placement of a heat pump on each building are the key points to achieve the transformation. Regarding the sensitivity analysis, the transformation is worth doing until the seasonal storage and solar collector field sizes are reduced to 60% and 80% of their values in the reference case, respectively. The economic analysis shows, however, that it is hard for highly efficient low temperature renewable based heat networks to compete with district heating systems based on a centralized fossile CHP solution. Thus, though the presented transformation is technically possible, there is a strong need to change existing economic schemes and policies for fostering a stronger promotion of renewable energy policies in the heat sector.


Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4625
Author(s):  
Alisa Freyre ◽  
Stefano Cozza ◽  
Matthias Rüetschi ◽  
Meinrad Bürer ◽  
Marlyne Sahakian ◽  
...  

In this paper, we perform a literature review on the current state of knowledge about homeowners in the context of the adoption of renewable heating systems. Despite a considerable number of studies about homeowners, homeowner–installer interactions, and ways to improve the effectiveness of renewable heating programs, based on homeowner knowledge, have not yet been studied in much detail. To address these knowledge gaps, we conduct a qualitative study on single-family house owners who installed heat pumps and took part in a renewable heating program in Geneva, Switzerland. We cover homeowner practices in choosing installers and heating system types, homeowners’ feedback about heat pump installation and use, as well as their experience in participation in the renewable heating program. Based on the literature review and the findings from the interviews, we provide the following recommendations on how to increase the effectiveness of renewable heating programs: (a) support for homeowners should not be limited to financial incentives; (b) partnership programs with installers could help to increase the quality of installation services and enable homeowners to choose qualified installers; and (c) assisting homeowners in pre-qualification and ex-post analysis, in learning how to operate their renewable heating systems and in solving problems during the post-installation period, can contribute to improved technology reputation, which can, in turn, increase technology uptake by other homeowners.


2016 ◽  
Vol 68 (1) ◽  
pp. 45-51
Author(s):  
Guangying Ma ◽  
Shurong Ning ◽  
Yunlong Hu ◽  
jun Gao

Purpose – The aim of this study is to establish a dynamic model of the filtration ratio. For the problem that the measured value of the filtration ratio is far less than the theoretical value in the actual hydraulic filtering system, the paper aims to find the relationship between the filtration ratio and the parameters of the hydraulic systems, such as the contamination level and the dirt-holding quantity of the filter. Design/methodology/approach – The paper opted for the method of experimental analysis and simulation to determine the relationship between the filtration ratio and the parameters of the hydraulic system, and established a dynamic filtration ratio model. Findings – The paper provides a preliminary model of dynamic filtration ratio, and the model shows that the filtration ratio is exponentially related to the contamination level and the dirt-holding quantity. Different filters have different influence coefficients. The filtering capacity for a certain particle size and the contamination level control of the filter for different hydraulic systems can be judged according to the dynamic balance equation of hydraulic systems. Originality/value – The paper is useful in the selection of filters and in the precise control of the contamination level of the hydraulic system.


Sign in / Sign up

Export Citation Format

Share Document