scholarly journals Pengembangan Modul Berbasis Inkuiri Terbimbing Pada Materi Hukum Dasar Kimia Di Sekolah Menengah Atas

2019 ◽  
Vol 2 (1) ◽  
pp. 187-193
Author(s):  
Intan Pratiwi ◽  
Ratu Evina D ◽  
Ramlan Silaban ◽  
Retno Dwi Suyanti

Penelitian ini bertujuan untuk mengetahui : 1) bahan ajar materi hukum dasar kimia pada buku yang digunakan di SMA/MA memenuhi kriteria Badan Standar Nasional Pendidikan (BSNP); 2) modul yang dikembangkan memenuhi kriteria BSNP; 3) uji coba modul berbasis inkuiri terbimbing dapat meningkatkan hasil belajar siswa; 4) hasil belajar siswa menggunakan modul berbasis inkuiri terbimbing lebih besar dari harga KKM. Penelitian ini dilakukan terhadap siswa kelas X SMA Negeri 14 Medan. Populasi yaitu seluruh siswa kelas X SMA Negeri 14 Medan Tahun Ajaran 2016/2017. Sampel ditetapkan dengan cluster random sampling dengan mengambil 1 kelas sebagai kelas eksperimen. Metode penelitian yang digunakan adalah metode penelitian dan pengembangan (Research and Development). Hasil penelitian menunjukkan : (1) bahan ajar pada materi hukum dasar kimia pada buku yang digunakan di SMA/MA sudah memenuhi kriteria BSNP dengan kriteria cukup valid dan tidak perlu revisi; (2) modul yang dikembangkan memenuhi kriteria BSNP, data yang diperoleh yaitu kelayakan isi = 3,68; kelayakan bahasa = 3,57; kelayakan penyajian = 3,70; kelayakan kegrafikaan = 3,50 dengan kriteria valid dan tidak perlu revisi; (3) uji coba modul berbasis inkuiri terbimbing dapat meningkatkan hasil belajar siswa sebesar 80%; (4) hasil belajar siswa menggunakan modul berbasis inkuiri terbimbing lebih besar dari harga KKM.   The research aimed to find: 1) teaching materials for basic chemical law material in books used in high school/MA meeting the criteria of the National Education Standards Agency (BSNP); 2) the modules developed meeting BSNP criteria; 3) trial of guided inquiry-based modules which can improve student learning outcomes; 4) student learning outcomes using guided inquiry-based modules which are greater than KKM scores. This research was conducted on class X students of SMAN 14 Medan. The population was all students of class X SMAN 14 Medan FY 2016/2017. The sample was determined by cluster random sampling by taking 1 class as an experimental class. The research method used was the research and development method (Research and Development). The results of the study showed: (1) teaching materials in the basic chemical law material in the books used in the SMA / MA met BSNP criteria with criteria that were quite valid and did not need to be revised; (2) the module developed met the BSNP criteria; the data obtained were content eligibility = 3.68; language eligibility = 3.57; presentation eligibility = 3.70; feasibility of graft = 3.50 with valid criteria and did not need any revision; (3) pilot guided inquiry-based modules could improve student learning outcomes by 80%; (4) student learning outcomes using guided inquiry-based modules were greater than KKM scores.

2018 ◽  
Vol 3 (2) ◽  
pp. 22-30
Author(s):  
Ariska Yuli Damayanti

This research is research and development (R & D). the method used is 4D consisting of 4 stages Define, Design, Develop, and Disseminate or adapted into a 4-P model, namely Defining, Designing, Developing, and Spreading.The results of the validation by the validator were 77.5% in the material aspects and 79.3% in the teaching material aspects, and 74.4% in the language aspects. In accordance with the module eligibility criteria that the Flipbook-based module is appropriate to use. The results of ANACOVA analysis showed the effect of Flipbook module teaching materials on student learning outcomes by 22.3%. Based on the results of these studies it can be concluded that the Flipbook module can be said to be worthy of being used as a learning material to improve student learning outcomes.


2019 ◽  
Vol 1 (2) ◽  
pp. 40
Author(s):  
Gerry Lumolos ◽  
Dokri Gumolung ◽  
Joice Caroles

Practicum guides are printed teaching materials that students can use in the learning process. This development research aims to determine the feasibility of an acid base-based practicum guide for environmental materials with a 3-D model and to improve student learning outcomes through practicum activities and the application of guided inquiry methods. The subject of this research was class XI IPA 1 at SMA Negeri 1 Tenga. The feasibility test for large groups has an average percentage of 88.24% which means that this practical guide is suitable for use with valid qualifications. Student learning outcomes using post test scores with the technique of statistical analysis of one sample t-test (one sample t-test). The results of the one-sample t-test hypothesis at a level of α = 5% were obtained tcount = 4.604> ttable = 1.708. The results of this study indicate that the guidelines for acid-base-based practicum for environmental materials are appropriate to be used in chemistry learning, and the use of acid-based practicum guides for environmental materials with the application of guided inquiry methods can improve student learning outcomes in acid-base material


2020 ◽  
Vol 3 (1) ◽  
pp. 54-61
Author(s):  
Royhatul Jannah ◽  
Jun Surjanti ◽  
Riza Yonisa Kurniawan

The purpose of this paper is to improve student learning outcomes. This study is a Research and Development (R&D) using the 4D model Thiagarajan which includes stages Define, Design, Develop, and Disseminate but the Disseminate stage is not carried out. The findings showed that the feasibility of the material, language, evaluation, and graphics of 87%, 85%, 85%, 87% with a very decent category. The average N-gain score got a score of 0.6 categorized as moderate and classical completeness of student learning outcomes is 90%. While the results of the responses of students get an average percentage of 90,4% categorized as very feasible. Improved learning outcomes can be obtained using MMPII worksheets which include metacognitive features namely planning, monitoring, and evaluating. This study uses limited trials that were conducted on 20 students of XI IPS class Kanjeng Sepuh Senior High School.


2016 ◽  
Vol 2 (2) ◽  
pp. 223
Author(s):  
Nazillatur Rohmiyati ◽  
Ashadi Ashadi ◽  
Suryadi Budi Utomo

Penelitian ini bertujuan untuk: (1) Menganalisis kelayakan modul kimia berbasis inkuiri terbimbing pada materi reaksi oksidasi dan reduksi untuk siswa SMK kelas X, (2) Mengetahui efektivitas modul kimia berbasis inkuiri terbimbing pada materi reaksi oksidasi dan reduksi untuk siswa SMK kelas X. Metode penelitian yang digunakan adalah Research and Development (R&D). Penelitian dilakukan di SMK N Kota Salatiga Program Studi Keahlian Teknik Otomotif. Kelayakan modul diketahui melalui tahap validasi ahli serta respon guru dan  siswa sedangkan efektifitas modul melalui penelitian eksperimen. Data dikumpulkan menggunakan tes untuk hasil belajar kognitif, lembar observasi untuk hasil belajar afektif dan psikomotor.  Hipotesis diuji menggunakan Anava dan Kruskal-Wallis one way analysis of variance. Hasil penelitian diperoleh kesimpulan: (1) Modul kimia berbasis inkuiri terbimbing pada materi reaksi oksidasi dan reduksi yang dikembangkan layak digunakan dalam pembelajaran kimia, (2) Modul kimia berbasis inkuiri terbimbing pada materi reaksi oksidasi dan reduksi yang dikembangkan efektif digunakan untuk meningkatkan hasil belajar siswa. Rata – rata hasil belajar siswa yang belajar menggunakan modul lebih tinggi dibandingkan rata – rata hasil belajar siswa yang belajar menggunakan LKS.Kata Kunci: pengembangan, modul, inkuiri terbimbing, reaksi oksidasi dan reduksiThe Development of Chemical Modules Based Guided Inquiry in the Oxidation and Reduction Reactions Matter  AbstractThis study was aimed to: (1) Analyze the feasibility of chemical module based on guided inquiry in oxidation and reduction reactions material on 10th grade students of vocational students, (2) Determine the effectiveness of chemical module based guided inquiry on oxidation and reduction reactions material on 10th grade students  of vocational students. This study is a Research and Development (R&D). The study was conducted in SMK N Salatiga in Automotive Engineering Skills Program. To determine the feasibility of the module through the validation by experts and the response from teachers and students. Whereas to determine the effectiveness of the module in the learning process through by experimental research. Data was collected using a test for cognitive learning outcomes, observation sheet for affective and psychomotor learning outcomes. The hypothesis was tested using ANOVA and Kruskal-Wallis one-way analysis of variance. The conclusion: (1) Developed chemical module based on guided inquiry in oxidation and reduction reactions material is fit as learning material in chemistry subject, (2) Developed chemical module based on guided inquiry in oxidation and reduction reactions material is effectively used to improve student learning outcomes. Average student learning outcomes that study using chemical modul is higher than the average student learning outcomes that study using worksheets.Keywords: development, modules, guided inquiry, oxidation and reduction reactions


2020 ◽  
Vol 5 (1) ◽  
pp. 149-158
Author(s):  
Hartoyo Mugiraharjo

This research is backed by a low percentage of the achievement criteria at least (KKM), which is obtained by the students of IX-D MTs Negeri 1 Yogyakarta. Of the 28 students who participated in the test post on Pancasila materials as basic and ideology of the country with the study of Cooperatif Learning model, only 4 people can be declared complete (14.29%) and the remaining 24 persons have not been completed (85.71%). The Data indicates that the results of learning in the teaching materials may be declared incomplete. The percentage is far from the ideal percentage between 80%-100%. This study uses a class action method that lasts for three cycles. Each cycle includes planning, implementation, observation and reflection activities. The results of the class action research that took place in 3 research cycles can be concluded: 1) During PTK, the efforts to implement the question and answer methods have been well managed and effective enough to improve student learning outcomes; 2) Application of the question and answer method with the variation of learning media can be run effective, average final result 82.86 then student learning results will increase.


2020 ◽  
Vol 7 (2) ◽  
pp. 203
Author(s):  
Keysar Panjaitan ◽  
Abdul Hasan Saragih ◽  
Saut Purba

Abstrak: Penelitian ini bertujuan: (1) menghasilkan media pembelajaran generic green skill based learning pada project based learning pada mata kuliah menggambar teknik berbantuan CAD,  (2) Mengetahui keefektifan media pembelajaran generic green skill based learning pada project based learning pada mata kuliah menggambar teknik berbantuan CAD. Penelitian ini menggunakan metode Research and Development yang diusulkan dengan model Borg & Gall. Subjek penelitian adalah mahasiswa Jurusan Pendidikan Teknik Mesin Universitas Negeri Medan yang ditinjau oleh ahli desain dan ahli materi. Uji coba dilakukan dengan uji coba individu, uji coba kelompok kecil, dan uji coba lapangan, serta uji keefektifan model pembelajaran dengan membandingkan hasil kelompok eksperimen dengan kelompok kontrol. Analisis menggunakan analisis deskriptif pada setiap tahap pengembangan dan dilanjutkan dengan analisis statistik uji-t untuk mengetahui keefektifan media Pembelajaran Berbasis Keterampilan Hijau Generik dalam Pembelajaran Berbasis Proyek dengan Menggunakan CAD dalam Keterampilan Menggambar Teknis untuk meningkatkan hasil belajar siswa. Hasil penelitian menunjukkan bahwa media Pembelajaran Keterampilan Hijau Generik dalam Pembelajaran Berbasis Proyek dengan Menggunakan CAD dapat dinyatakan layak untuk diterapkan dan unggul ditinjau dari aspek pembelajaran, materi, dan media; media Pembelajaran Keterampilan Hijau Generik dalam Pembelajaran Berbasis Proyek dengan Menggunakan CAD efektif untuk meningkatkan hasil belajar siswa pada Keterampilan Menggambar Teknik berbantuan CAD. Kata Kunci: media pembelajaran, generic green skill, project based learning, gambar teknik, CAD Abstract: This study aims to: (1) produce generic green skill based learning media in project based learning in CAD-assisted engineering drawing courses, (2) Determine the effectiveness of generic green skill based learning media in project based learning in engineering drawing courses. CAD-assisted. This study uses the Research and Development method proposed by the Borg & Gall model. The research subjects were students of the Department of Mechanical Engineering Education, State University of Medan, who were reviewed by design experts and material experts. The trials were carried out by individual trials, small group trials, and field trials, as well as testing the effectiveness of the learning model by comparing the results of the experimental group with the control group. The analysis uses descriptive analysis at each stage of development and is followed by t-test statistical analysis to determine the effectiveness of Generic Green Skills-Based Learning media in Project-Based Learning by Using CAD in Technical Drawing Skills to improve student learning outcomes. The results showed that the Generic Green Skills Learning media in Project-Based Learning Using CAD can be declared feasible and superior in terms of the aspects of learning, material, and media; Learning media for Generic Green Skills in Project-Based Learning using CAD is effective to improve student learning outcomes on CAD-assisted Technical Drawing Skills. Keywords: learning media, generic green skills, project based learning, engineering drawings, CAD


2020 ◽  
Vol 5 (2) ◽  
pp. 1
Author(s):  
Haidhar Reizal ◽  
Agustiningsih Agustiningsih ◽  
Fajar Surya Hutama

Abstrak: Penelitian ini menghasilkan produk berupa buku ajar berbasis infografis pada tema 5 ekosistem subtema 1 komponen ekosistem pada kelas 5 SD. Jenis penelitian yang digunakan adalah penelitian R&D (research and development). Kelayakan produk buku ajar berbasis infografis diukur berdasarkan validitas buku, efektivitas buku dan respons siswa. Subjek uji coba penelitian ini adalah siswa kelas VD SDN Jember Lor 01, siswa kelas VA SDN Jember Lor 02 dan siswa kelas V Ustman SDIT Harapan Umat. Metode pengumpulan data yang digunakan ialah validasi dan kueisioner. Berdasarkan hasil analisis validasi didapatkan persentase dari validator ahli sebesar 92,6% dan dapat dikatakan sangat valid. Keefektivitasan buku ajar berdasarkan angket hasil belajar siswa didapatkan persentase sebesar 80%, 82% dan 84%. Buku ajar infografis mendapat respons positif dengan persentase 100%, 100% dan 97,7%. Berdasarkan hasil tersebut buku ajar berbasis infografis sudah memenuhi aspek untuk dapat digunakan sebagai buku ajar.INFOGRAPHIC BASED TEXTBOOK DEVELOPMENT IN THE ECOSYSTEM THEME TO IMPROVE STUDENT LEARNING OUTCOMES IN 5TH CLASS ELEMENTARY SCHOOLAbstract: This research developed an infographic-based textbook on subtheme 1: ecosystem component of theme 5: an ecosystem in 5th grade of elementary school. The research type used R&D (research and development). Infographic-based textbook’s properness measured by book validation, book effectivity, and students’ responses. The subject of this research was V grade students D class from SDN Jember Lor 01, V grade students B class from SDN Jember 02, and V grade student Ustman class from SDIT Harapan umat. This research used validation and questionnaire as data collection methods. From the data analysis, the percentage obtained from validator was 92,6%, and it could be concluded as very valid. The infographic-based textbook effectivity based on student learning outcomes questionnaire, the percentage that obtained were 80%, 82%, and 84%. The infographic-based textbook got a positive response, with a percentage of 100%, 100%, and 97,7%. From the result, an infographic-based textbook fulfilled aspect to be used as a textbook.


2019 ◽  
Vol 4 (2) ◽  
pp. 130
Author(s):  
Rini Anggraini Pakpahan

This research aimed to determine the effect of STAD cooperative learning model to student learning outcomes in the subject matter of fluid at class XI IPA SMA Negeri 1 Padangsidimpuan. This was eksperimental research with One Group Pretest Posttest Design. The population was all class XI IPA SMA Negeri 1 Padangsidimpuan (128 students) and sample was taken through cluster random sampling, so the sample was 32 students. The instrument of this research was the achievement test. The result of this study indicated that student learning outcomes using STAD cooperative learning model (74,69) were higher than student learning outcomes using convensional learning model (62,25). Based on the  result of hypothesis testing at significance level 5% with degree of freedom 31, tcount = 9,79 > ttable = 1,698 then the hypothesis can be accepted, it means that there was influence STAD cooperative learning model to student learning outcomes in the subject matter of fluid at class XI IPA SMA Negeri 1 Padangsidimpuan.


Sign in / Sign up

Export Citation Format

Share Document