Regulatory and sustainability initiatives lead to improved polyaminopolyamide epichlorohydrin (PAE) wet-strength resins and paper products

TAPPI Journal ◽  
2018 ◽  
Vol 17 (09) ◽  
pp. 519-532 ◽  
Author(s):  
Mark Crisp ◽  
Richard Riehle
Keyword(s):  
Health And Safety ◽  
Cost Effective ◽  
Worker Safety ◽  
Regulatory Requirements ◽  
Wet Strength ◽  
The Past ◽  
Consumer Safety ◽  
Federal Institute ◽  
Sustainability Initiatives ◽  
The Impact

Polyaminopolyamide-epichlorohydrin (PAE) resins are the predominant commercial products used to manufacture wet-strengthened paper products for grades requiring wet-strength permanence. Since their development in the late 1950s, the first generation (G1) resins have proven to be one of the most cost-effective technologies available to provide wet strength to paper. Throughout the past three decades, regulatory directives and sustainability initiatives from various organizations have driven the development of cleaner and safer PAE resins and paper products. Early efforts in this area focused on improving worker safety and reducing the impact of PAE resins on the environment. These efforts led to the development of resins containing significantly reduced levels of 1,3-dichloro-2-propanol (1,3-DCP) and 3-monochloropropane-1,2-diol (3-MCPD), potentially carcinogenic byproducts formed during the manufacturing process of PAE resins. As the levels of these byproducts decreased, the environmental, health, and safety (EH&S) profile of PAE resins and paper products improved. Recent initiatives from major retailers are focusing on product ingredient transparency and quality, thus encouraging the development of safer product formulations while maintaining performance. PAE resin research over the past 20 years has been directed toward regulatory requirements to improve consumer safety and minimize exposure to potentially carcinogenic materials found in various paper products. One of the best known regulatory requirements is the recommendations of the German Federal Institute for Risk Assessment (BfR), which defines the levels of 1,3-DCP and 3-MCPD that can be extracted by water from various food contact grades of paper. These criteria led to the development of third generation (G3) products that contain very low levels of 1,3-DCP (typically <10 parts per million in the as-received/delivered resin). This paper outlines the PAE resin chemical contributors to adsorbable organic halogens and 3-MCPD in paper and provides recommendations for the use of each PAE resin product generation (G1, G1.5, G2, G2.5, and G3).

scholarly journals Work Schedule Irregularity and the Risk of Work-Related Injury among Korean Manual Workers

2020 ◽  
Vol 17 (20) ◽  
pp. 7617
Author(s):  
Won-Tae Lee ◽  
Sung-Shil Lim ◽  
Jihyun Kim ◽  
Sehyun Yun ◽  
Jin-Ha Yoon ◽  
...  
Keyword(s):  
Safety Information ◽  
Productivity Loss ◽  
Health And Safety ◽  
Multivariate Logistic Regression Analysis ◽  
Worker Safety ◽  
Work Schedule ◽  
Related Factors ◽  
Work Related ◽  
Work Related Injury ◽  
The Impact

Work schedules comprise various variables and generate health and safety outcomes, including work-related injury, which causes socioeconomic problems, such as productivity loss and damage to worker health. We investigated the association between work schedule irregularity and the incidence of work-related injury among South Korean manual workers using data from the 5th Korean Working Conditions Survey. In total, 18,330 manual workers were included. A multivariate logistic regression analysis was performed to understand the association between work schedule and work-related injury and the influence of sufficient safety information and work schedule on work-related injury. We calculated the influence of an irregular work schedule on occupational injury after controlling for personal and work environment-related factors. The adjusted odds ratio (OR) for work-related injury was 1.66 (95% confidence interval (CI) 1.32–2.09) for an irregular work schedule. The interaction had an additive effect when the work schedule was irregular, even when sufficient safety information was provided. Manual workers had a higher incidence of injury (2.1%). Even in adjusted analyses, work schedule irregularity conferred greater risks of work injury, particularly when not working the same number of days weekly (OR 1.52, 95% CI 1.21–1.90). Policymakers and health professionals need to consider the impact of work schedule irregularity on worker safety and health.

Greening the Gulag: Austerity, neoliberalism, and the making of the “green prisoner”

2019 ◽  
Vol 3 (4) ◽  
pp. 1120-1136
Author(s):  
B Jewell Bohlinger
Keyword(s):  
United States ◽  
Prison Population ◽  
Cost Effective ◽  
Mass Incarceration ◽  
The United States ◽  
Effective Strategies ◽  
The Past ◽  
Cost Cutting ◽  
Important Challenge ◽  
The Impact

Over the past 30 years the U.S. prison population has exploded. With the impact of climate change already here, we are also seeing new critiques of mass incarceration emerge, namely their environmental impact. In response to these burgeoning critiques as well as calls to action by the Justice Department to implement more sustainable and cost-effective strategies in prisons, the United States is experiencing a surge in prison sustainability programs throughout the country. Although sustainability is an important challenge facing the world, this paper argues that while “greening” programs seem like attempts to reform current methods of imprisonment, sustainability programming is an extension of the neoliberalization of incarceration in the United States. By emphasizing cost cutting while individualizing rehabilitation, prisons mobilize sustainability programming to produce “green prisoners” who are willing to take responsibility for their rehabilitation and diminish their economically burdensome behaviors (i.e. excessive wastefulness). Using semi-structure journals and interviews at three Oregon prisons, this paper investigates these ideas through the lens of the Sustainability in Prisons Project.

The Impact of Integration on Mexico's Workers: Why GATT, NAFTA, WTO, and OECD are Important

1998 ◽  
Vol 8 (2) ◽  
pp. 243-252
Author(s):  
Blanca Lemus ◽  
David Barkin
Keyword(s):  
Problem Solving ◽  
New Technologies ◽  
Health And Safety ◽  
Living Standards ◽  
Workplace Health ◽  
The Past ◽  
Adverse Health Outcomes ◽  
International Solidarity ◽  
Global Spread ◽  
The Impact

Globalization and integration have reduced living standards for workers and peasants in Mexico, even while the pundits continue to applaud the efforts and call for patience from its hoards of malcontents. This decline is an inherent and inevitable result that can only be stemmed by effective international solidarity movements along with the coordination of local struggles against this process on an international scale. New technologies frequently increase accidents and other adverse health outcomes for workers. Partially the result of the rising intensity of work, it is aggravated in Mexico by the lack of appropriate training. Although more attention is devoted to reducing problems of workplace health and safety, and more resources are devoted to problem-solving, the global spread of production and finance is recklessly destroying resources, contaminating the environment, threatening workers' lives and our collective capacity to survive. As a result, new opportunities must be seized to empower local labor groups that in the past would have been defeated by their anonymity.

Fluorescent potentiometric dyes for membrane-potential imaging

1994 ◽  
Vol 52 ◽  
pp. 166-167
Author(s):  
Leslie M. Loew
Keyword(s):  
Membrane Potential ◽  
Single Cells ◽  
Quantitative Imaging ◽  
Optical Recording ◽  
Biological Processes ◽  
Major Focus ◽  
The Past ◽  
Excitable Systems ◽  
Major Application ◽  
The Impact

A major application of potentiometric dyes has been the multisite optical recording of electrical activity in excitable systems. After being championed by L.B. Cohen and his colleagues for the past 20 years, the impact of this technology is rapidly being felt and is spreading to an increasing number of neuroscience laboratories. A second class of experiments involves using dyes to image membrane potential distributions in single cells by digital imaging microscopy - a major focus of this lab. These studies usually do not require the temporal resolution of multisite optical recording, being primarily focussed on slow cell biological processes, and therefore can achieve much higher spatial resolution. We have developed 2 methods for quantitative imaging of membrane potential. One method uses dual wavelength imaging of membrane-staining dyes and the other uses quantitative 3D imaging of a fluorescent lipophilic cation; the dyes used in each case were synthesized for this purpose in this laboratory.

Perceived Burden of Informal Caregivers of a Chronically Ill Older Family Member

GeroPsych ◽  
2011 ◽  
Vol 24 (3) ◽  
pp. 143-154 ◽  
Author(s):  
Elmar Gräßel ◽  
Raffaela Adabbo
Keyword(s):  
Family Member ◽  
Informal Caregiver ◽  
Chronically Ill ◽  
Stress Model ◽  
The Past ◽  
Perceived Burden ◽  
Hypothetical Construct ◽  
Care Situation ◽  
The Impact ◽  
Further Development

The burden of caregivers has been intensively researched for the past 30 years and has resulted in a multitude of individual findings. This review illustrates the significance of the hypothetical construct of perceived burden for the further development and design of the homecare situation. Following explanations regarding the term informal caregiver, we derive the construct burden from its conceptual association with the transactional stress model of Lazarus and Folkman. Once the extent and characteristics of burden have been set forth, we then present the impact of perceived burden as the care situation. The question of predictors of burden will lead into the last section from which implications can be derived for homecare and relief of caregivers.

Soziale Disziplinierung im flexiblen Kapitalismus

2004 ◽  
Vol 34 (136) ◽  
pp. 339-356
Author(s):  
Tobias Wölfle ◽  
Oliver Schöller
Keyword(s):  
Social Welfare ◽  
Second Step ◽  
Social Rights ◽  
Federal Law ◽  
Capitalist Development ◽  
The Core ◽  
The Past ◽  
The Impact ◽  
Municipal Level

Under the term “Hilfe zur Arbeit” (aid for work) the federal law of social welfare subsumes all kinds of labour disciplining instruments. First, the paper shows the historical connection of welfare and labour disciplining mechanisms in the context of different periods within capitalist development. In a second step, against the background of historical experiences, we will analyse the trends of “Hilfe zur Arbeit” during the past two decades. It will be shown that by the rise of unemployment, the impact of labour disciplining aspects of “Hilfe zur Arbeit” has increased both on the federal and on the municipal level. For this reason the leverage of the liberal paradigm would take place even in the core of social rights.

Mineral/microfibrillated cellulose composite materials: High performance products, applications, and product forms

TAPPI Journal ◽  
2018 ◽  
Vol 17 (09) ◽  
pp. 507-515 ◽  
Author(s):  
David Skuse ◽  
Mark Windebank ◽  
Tafadzwa Motsi ◽  
Guillaume Tellier
Keyword(s):  
Composite Materials ◽  
High Performance ◽  
Aqueous Suspension ◽  
Production Capacity ◽  
Cost Savings ◽  
Cost Effective ◽  
New Materials ◽  
Wet Strength ◽  
Product Forms ◽  
Cellulose Composite

When pulp and minerals are co-processed in aqueous suspension, the mineral acts as a grinding aid, facilitating the cost-effective production of fibrils. Furthermore, this processing allows the utilization of robust industrial milling equipment. There are 40000 dry metric tons of mineral/microfbrillated (MFC) cellulose composite production capacity in operation across three continents. These mineral/MFC products have been cleared by the FDA for use as a dry and wet strength agent in coated and uncoated food contact paper and paperboard applications. We have previously reported that use of these mineral/MFC composite materials in fiber-based applications allows generally improved wet and dry mechanical properties with concomitant opportunities for cost savings, property improvements, or grade developments and that the materials can be prepared using a range of fibers and minerals. Here, we: (1) report the development of new products that offer improved performance, (2) compare the performance of these new materials with that of a range of other nanocellulosic material types, (3) illustrate the performance of these new materials in reinforcement (paper and board) and viscosification applications, and (4) discuss product form requirements for different applications.

The impact of regulatory requirements on systemically important banks: Global practices, evidence from Russia

2019 ◽  
Vol 25 (5) ◽  
pp. 1071-1085
Author(s):  
E.B. Starodubtseva ◽  
◽  
M.B. Medvedeva ◽  
O.M. Markova ◽  
◽  
...  
Keyword(s):  
Regulatory Requirements ◽  
The Impact ◽  
Systemically Important Banks

Exploring the Benefits of Early Contractor Involvement (ECI) and the Mechanism for Automated 5D BIM Quantification Process in Offsite Modular Construction

2016 ◽  
Author(s):  
Tochukwu Moses ◽  
David Heesom ◽  
David Oloke ◽  
Martin Crouch
Keyword(s):  
Effective Means ◽  
Cost Effective ◽  
Modular Construction ◽  
Automated Quantification ◽  
Building Information ◽  
Project Risks ◽  
Value Add ◽  
The Uk ◽  
The Impact ◽  
Level 2

The UK Construction Industry through its Government Construction Strategy has recently been mandated to implement Level 2 Building Information Modelling (BIM) on public sector projects. This move, along with other initiatives is key to driving a requirement for 25% cost reduction (establishing the most cost-effective means) on. Other key deliverables within the strategy include reduction in overall project time, early contractor involvement, improved sustainability and enhanced product quality. Collaboration and integrated project delivery is central to the level 2 implementation strategy yet the key protocols or standards relative to cost within BIM processes is not well defined. As offsite construction becomes more prolific within the UK construction sector, this construction approach coupled with BIM, particularly 5D automated quantification process, and early contractor involvement provides significant opportunities for the sector to meet government targets. Early contractor involvement is supported by both the industry and the successive Governments as a credible means to avoid and manage project risks, encourage innovation and value add, making cost and project time predictable, and improving outcomes. The contractor is seen as an expert in construction and could be counter intuitive to exclude such valuable expertise from the pre-construction phase especially with the BIM intent of äóÖbuild it twiceäó», once virtually and once physically. In particular when offsite construction is used, the contractoräó»s construction expertise should be leveraged for the virtual build in BIM-designed projects to ensure a fully streamlined process. Building in a layer of automated costing through 5D BIM will bring about a more robust method of quantification and can help to deliver the 25% reduction in overall cost of a project. Using a literature review and a case study, this paper will look into the benefits of Early Contractor Involvement (ECI) and the impact of 5D BIM on the offsite construction process.

Overseas Development Administration. A Guide to Social Analysis for Projects in Developing Countries. London: HMSO. 1995. viii+248 pages. Hardbound. £18.95.

1996 ◽  
Vol 35 (2) ◽  
pp. 189-190
Author(s):  
Mir Annice Mahmood
Keyword(s):  
Developing Countries ◽  
Social Change ◽  
Practical Experience ◽  
Development Projects ◽  
Social Analysis ◽  
Economic Perspective ◽  
Human Environment ◽  
The Past ◽  
The Impact ◽  
Overseas Development

This book, hereinafter referred to as the Guide, has been developed for those social analysts (e.g., anthropologists, sociologists, and human geographers) who have had little or no practical experience in applying their knowledge as development practitioners. In the past, development projects would be analysed from a narrow financial and economic perspective. But with the evolution of thinking on development, this narrow financial and economic aspect has now been broadened to include the impact on society as the very meaning of development has now come to symbolise social change. Thus, development is not restricted only to plans and figures; the human environment in its entirety is now considered for analysis while designing and implementing development projects.

Sign in / Sign up

Export Citation Format

Share Document